/*
	FreeRTOS.org V5.2.0 - Copyright (C) 2003-2009 Richard Barry.

	This file is part of the FreeRTOS.org distribution.

	FreeRTOS.org is free software; you can redistribute it and/or modify it 
	under the terms of the GNU General Public License (version 2) as published
	by the Free Software Foundation and modified by the FreeRTOS exception.

	FreeRTOS.org is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
	more details.

	You should have received a copy of the GNU General Public License along 
	with FreeRTOS.org; if not, write to the Free Software Foundation, Inc., 59 
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.

	A special exception to the GPL is included to allow you to distribute a 
	combined work that includes FreeRTOS.org without being obliged to provide
	the source code for any proprietary components.  See the licensing section
	of http://www.FreeRTOS.org for full details.


	***************************************************************************
	*                                                                         *
	* Get the FreeRTOS eBook!  See http://www.FreeRTOS.org/Documentation      *
	*                                                                         *
	* This is a concise, step by step, 'hands on' guide that describes both   *
	* general multitasking concepts and FreeRTOS specifics. It presents and   *
	* explains numerous examples that are written using the FreeRTOS API.     *
	* Full source code for all the examples is provided in an accompanying    *
	* .zip file.                                                              *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/

/* 
Changes from V3.0.0

Changes from V3.0.1
*/

/* Scheduler include files. */
#include "FreeRTOS.h"
#include <task.h>

#include "partest.h"

/*-----------------------------------------------------------
 * Simple parallel port IO routines for the FED 40pin demo board.
 * The four LED's are connected to D4 to D7.
 *-----------------------------------------------------------*/

#define partstBIT_AS_OUTPUT			( ( unsigned portSHORT ) 0 )
#define partstSET_OUTPUT			( ( unsigned portSHORT ) 1 )
#define partstCLEAR_OUTPUT			( ( unsigned portSHORT ) 0 )

#define partstENABLE_GENERAL_IO		( ( unsigned portCHAR ) 7 )

/*-----------------------------------------------------------*/

void vParTestInitialise( void )
{
	/* Set the top four bits of port D to output. */
	bTRD7		= partstBIT_AS_OUTPUT;
	bTRD6		= partstBIT_AS_OUTPUT;
	bTRD5		= partstBIT_AS_OUTPUT;
	bTRD4		= partstBIT_AS_OUTPUT;

	/* Start with all bits off. */
	bRD7		= partstCLEAR_OUTPUT;
	bRD6		= partstCLEAR_OUTPUT;
	bRD5		= partstCLEAR_OUTPUT;
	bRD4		= partstCLEAR_OUTPUT;

	/* Enable the driver. */
	ADCON1		= partstENABLE_GENERAL_IO;
	bTRE2		= partstBIT_AS_OUTPUT;
	bRE2		= partstSET_OUTPUT;	
}
/*-----------------------------------------------------------*/

void vParTestSetLED( unsigned portCHAR ucLED, portCHAR cValue )
{
	/* We are only using the top nibble, so LED 0 corresponds to bit 4. */	
	vTaskSuspendAll();
	{
		switch( ucLED )
		{
			case 3	:	bRD7 = ( portSHORT ) cValue;
						break;
			case 2	:	bRD6 = ( portSHORT ) cValue;
						break;
			case 1	:	bRD5 = ( portSHORT ) cValue;
						break;
			case 0	:	bRD4 = ( portSHORT ) cValue;
						break;
			default	:	/* There are only 4 LED's. */
						break;
		}
	}
	xTaskResumeAll();
}
/*-----------------------------------------------------------*/

void vParTestToggleLED( unsigned portCHAR ucLED )
{
	/* We are only using the top nibble, so LED 0 corresponds to bit 4. */	
	vTaskSuspendAll();
	{
		switch( ucLED )
		{
			case 3	:	bRD7 = !bRD7;
						break;
			case 2	:	bRD6 = !bRD6;
						break;
			case 1	:	bRD5 = !bRD5;
						break;
			case 0	:	bRD4 = !bRD4 );
						break;
			default	:	/* There are only 4 LED's. */
						break;
		}
	}
	xTaskResumeAll();
}