/*
	FreeRTOS.org V5.2.0 - Copyright (C) 2003-2009 Richard Barry.

	This file is part of the FreeRTOS.org distribution.

	FreeRTOS.org is free software; you can redistribute it and/or modify it 
	under the terms of the GNU General Public License (version 2) as published
	by the Free Software Foundation and modified by the FreeRTOS exception.

	FreeRTOS.org is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
	more details.

	You should have received a copy of the GNU General Public License along 
	with FreeRTOS.org; if not, write to the Free Software Foundation, Inc., 59 
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.

	A special exception to the GPL is included to allow you to distribute a 
	combined work that includes FreeRTOS.org without being obliged to provide
	the source code for any proprietary components.  See the licensing section
	of http://www.FreeRTOS.org for full details.


	***************************************************************************
	*                                                                         *
	* Get the FreeRTOS eBook!  See http://www.FreeRTOS.org/Documentation      *
	*                                                                         *
	* This is a concise, step by step, 'hands on' guide that describes both   *
	* general multitasking concepts and FreeRTOS specifics. It presents and   *
	* explains numerous examples that are written using the FreeRTOS API.     *
	* Full source code for all the examples is provided in an accompanying    *
	* .zip file.                                                              *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/

/*
Changes from V3.2.4

	+ Modified the default MAC address as the one used previously was not liked
	  by some routers.

*/

#ifndef SAM_7_EMAC_H
#define SAM_7_EMAC_H

/* MAC address definition.  The MAC address must be unique on the network. */
#define emacETHADDR0 0
#define emacETHADDR1 0xbd
#define emacETHADDR2 0x33
#define emacETHADDR3 0x06
#define emacETHADDR4 0x68
#define emacETHADDR5 0x22

/* The IP address being used. */
#define emacIPADDR0 172
#define emacIPADDR1 25
#define emacIPADDR2 218
#define emacIPADDR3 205

/* The gateway address being used. */
#define emacGATEWAY_ADDR0 172
#define emacGATEWAY_ADDR1 25
#define emacGATEWAY_ADDR2 218
#define emacGATEWAY_ADDR3 3

/* The network mask being used. */
#define emacNET_MASK0 255
#define emacNET_MASK1 255
#define emacNET_MASK2 0
#define emacNET_MASK3 0

/*
 * Initialise the EMAC driver.  If successful a semaphore is returned that
 * is used by the EMAC ISR to indicate that Rx packets have been received.
 * If the initialisation fails then NULL is returned.
 */
xSemaphoreHandle xEMACInit( void );

/*
 * Send ulLength bytes from pcFrom.  This copies the buffer to one of the
 * EMAC Tx buffers, then indicates to the EMAC that the buffer is ready.
 * If lEndOfFrame is true then the data being copied is the end of the frame
 * and the frame can be transmitted. 
 */
portLONG lEMACSend( portCHAR *pcFrom, unsigned portLONG ulLength, portLONG lEndOfFrame );

/*
 * Frames can be read from the EMAC in multiple sections.
 * Read ulSectionLength bytes from the EMAC receive buffers to pcTo.  
 * ulTotalFrameLength is the size of the entire frame.  Generally vEMACRead
 * will be repetedly called until the sum of all the ulSectionLenths totals
 * the value of ulTotalFrameLength.
 */
void vEMACRead( portCHAR *pcTo, unsigned portLONG ulSectionLength, unsigned portLONG ulTotalFrameLength );

/*
 * The EMAC driver and interrupt service routines are defined in different 
 * files as the driver is compiled to THUMB, and the ISR to ARM.  This function
 * simply passes the semaphore used to communicate between the two.
 */
void vPassEMACSemaphore( xSemaphoreHandle xCreatedSemaphore );

/* 
 * Called by the Tx interrupt, this function traverses the buffers used to
 * hold the frame that has just completed transmission and marks each as
 * free again.
 */
void vClearEMACTxBuffer( void );

/*
 * Suspend on a semaphore waiting either for the semaphore to be obtained 
 * or a timeout.  The semaphore is used by the EMAC ISR to indicate that
 * data has been received and is ready for processing.
 */
void vEMACWaitForInput( void );

/*
 * Return the length of the next frame in the receive buffers.
 */
unsigned portLONG ulEMACInputLength( void );

#endif