/*
	FreeRTOS.org V5.2.0 - Copyright (C) 2003-2009 Richard Barry.

	This file is part of the FreeRTOS.org distribution.

	FreeRTOS.org is free software; you can redistribute it and/or modify it 
	under the terms of the GNU General Public License (version 2) as published
	by the Free Software Foundation and modified by the FreeRTOS exception.

	FreeRTOS.org is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
	more details.

	You should have received a copy of the GNU General Public License along 
	with FreeRTOS.org; if not, write to the Free Software Foundation, Inc., 59 
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.

	A special exception to the GPL is included to allow you to distribute a 
	combined work that includes FreeRTOS.org without being obliged to provide
	the source code for any proprietary components.  See the licensing section
	of http://www.FreeRTOS.org for full details.


	***************************************************************************
	*                                                                         *
	* Get the FreeRTOS eBook!  See http://www.FreeRTOS.org/Documentation      *
	*                                                                         *
	* This is a concise, step by step, 'hands on' guide that describes both   *
	* general multitasking concepts and FreeRTOS specifics. It presents and   *
	* explains numerous examples that are written using the FreeRTOS API.     *
	* Full source code for all the examples is provided in an accompanying    *
	* .zip file.                                                              *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/


/*-----------------------------------------------------------
 * Components that can be compiled to either ARM or THUMB mode are
 * contained in port.c  The ISR routines, which can only be compiled
 * to ARM mode, are contained in this file.
 *----------------------------------------------------------*/

/*
*/

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/* Constants required to handle critical sections. */
#define portNO_CRITICAL_NESTING		( ( unsigned portLONG ) 0 )

volatile unsigned portLONG ulCriticalNesting = 9999UL;

/*-----------------------------------------------------------*/

/* 
 * The scheduler can only be started from ARM mode, hence the inclusion of this
 * function here.
 */
void vPortISRStartFirstTask( void );
/*-----------------------------------------------------------*/

void vPortISRStartFirstTask( void )
{
	/* Simply start the scheduler.  This is included here as it can only be
	called from ARM mode. */
	asm volatile (														\
	"LDR		R0, =pxCurrentTCB								\n\t"	\
	"LDR		R0, [R0]										\n\t"	\
	"LDR		LR, [R0]										\n\t"	\
																		\
	/* The critical nesting depth is the first item on the stack. */	\
	/* Load it into the ulCriticalNesting variable. */					\
	"LDR		R0, =ulCriticalNesting							\n\t"	\
	"LDMFD	LR!, {R1}											\n\t"	\
	"STR		R1, [R0]										\n\t"	\
																		\
	/* Get the SPSR from the stack. */									\
	"LDMFD	LR!, {R0}											\n\t"	\
	"MSR		SPSR, R0										\n\t"	\
																		\
	/* Restore all system mode registers for the task. */				\
	"LDMFD	LR, {R0-R14}^										\n\t"	\
	"NOP														\n\t"	\
																		\
	/* Restore the return address. */									\
	"LDR		LR, [LR, #+60]									\n\t"	\
																		\
	/* And return - correcting the offset in the LR to obtain the */	\
	/* correct address. */												\
	"SUBS PC, LR, #4											\n\t"	\
	);																	
}
/*-----------------------------------------------------------*/

void vPortTickISR( void )
{
	/* Increment the RTOS tick count, then look for the highest priority 
	task that is ready to run. */
	vTaskIncrementTick();
	
	#if configUSE_PREEMPTION == 1
		vTaskSwitchContext();
	#endif
			
	/* Ready for the next interrupt. */
	TB_ClearITPendingBit( TB_IT_Update );	
}

/*-----------------------------------------------------------*/

/*
 * The interrupt management utilities can only be called from ARM mode.  When
 * THUMB_INTERWORK is defined the utilities are defined as functions here to
 * ensure a switch to ARM mode.  When THUMB_INTERWORK is not defined then
 * the utilities are defined as macros in portmacro.h - as per other ports.
 */
#ifdef THUMB_INTERWORK

	void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
	void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));

	void vPortDisableInterruptsFromThumb( void )
	{
		asm volatile ( 
			"STMDB	SP!, {R0}		\n\t"	/* Push R0.									*/
			"MRS	R0, CPSR		\n\t"	/* Get CPSR.								*/
			"ORR	R0, R0, #0xC0	\n\t"	/* Disable IRQ, FIQ.						*/
			"MSR	CPSR, R0		\n\t"	/* Write back modified value.				*/
			"LDMIA	SP!, {R0}		\n\t"	/* Pop R0.									*/
			"BX		R14" );					/* Return back to thumb.					*/
	}
			
	void vPortEnableInterruptsFromThumb( void )
	{
		asm volatile ( 
			"STMDB	SP!, {R0}		\n\t"	/* Push R0.									*/	
			"MRS	R0, CPSR		\n\t"	/* Get CPSR.								*/	
			"BIC	R0, R0, #0xC0	\n\t"	/* Enable IRQ, FIQ.							*/	
			"MSR	CPSR, R0		\n\t"	/* Write back modified value.				*/	
			"LDMIA	SP!, {R0}		\n\t"	/* Pop R0.									*/
			"BX		R14" );					/* Return back to thumb.					*/
	}

#endif /* THUMB_INTERWORK */
/*-----------------------------------------------------------*/

void vPortEnterCritical( void )
{
	/* Disable interrupts as per portDISABLE_INTERRUPTS(); 							*/
	asm volatile ( 
		"STMDB	SP!, {R0}			\n\t"	/* Push R0.								*/
		"MRS	R0, CPSR			\n\t"	/* Get CPSR.							*/
		"ORR	R0, R0, #0xC0		\n\t"	/* Disable IRQ, FIQ.					*/
		"MSR	CPSR, R0			\n\t"	/* Write back modified value.			*/
		"LDMIA	SP!, {R0}" );				/* Pop R0.								*/

	/* Now interrupts are disabled ulCriticalNesting can be accessed 
	directly.  Increment ulCriticalNesting to keep a count of how many times
	portENTER_CRITICAL() has been called. */
	ulCriticalNesting++;
}
/*-----------------------------------------------------------*/

void vPortExitCritical( void )
{
	if( ulCriticalNesting > portNO_CRITICAL_NESTING )
	{
		/* Decrement the nesting count as we are leaving a critical section. */
		ulCriticalNesting--;

		/* If the nesting level has reached zero then interrupts should be
		re-enabled. */
		if( ulCriticalNesting == portNO_CRITICAL_NESTING )
		{
			/* Enable interrupts as per portEXIT_CRITICAL().					*/
			asm volatile ( 
				"STMDB	SP!, {R0}		\n\t"	/* Push R0.						*/	
				"MRS	R0, CPSR		\n\t"	/* Get CPSR.					*/	
				"BIC	R0, R0, #0xC0	\n\t"	/* Enable IRQ, FIQ.				*/	
				"MSR	CPSR, R0		\n\t"	/* Write back modified value.	*/	
				"LDMIA	SP!, {R0}" );			/* Pop R0.						*/
		}
	}
}