/*
	FreeRTOS V5.4.1 - Copyright (C) 2009 Real Time Engineers Ltd.

	This file is part of the FreeRTOS distribution.

	FreeRTOS is free software; you can redistribute it and/or modify it	under 
	the terms of the GNU General Public License (version 2) as published by the 
	Free Software Foundation and modified by the FreeRTOS exception.
	**NOTE** The exception to the GPL is included to allow you to distribute a
	combined work that includes FreeRTOS without being obliged to provide the 
	source code for proprietary components outside of the FreeRTOS kernel.  
	Alternative commercial license and support terms are also available upon 
	request.  See the licensing section of http://www.FreeRTOS.org for full 
	license details.

	FreeRTOS is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
	more details.

	You should have received a copy of the GNU General Public License along
	with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.


	***************************************************************************
	*                                                                         *
	* Looking for a quick start?  Then check out the FreeRTOS eBook!          *
	* See http://www.FreeRTOS.org/Documentation for details                   *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/


/* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR IAR AVR PORT. */


#include <stdlib.h>
#include "FreeRTOS.h"
#include "queue.h"
#include "task.h"
#include "serial.h"

#define serBAUD_DIV_CONSTANT			( ( unsigned portLONG ) 16 )

/* Constants for writing to UCSRB. */
#define serRX_INT_ENABLE				( ( unsigned portCHAR ) 0x80 )
#define serRX_ENABLE					( ( unsigned portCHAR ) 0x10 )
#define serTX_ENABLE					( ( unsigned portCHAR ) 0x08 )
#define serTX_INT_ENABLE				( ( unsigned portCHAR ) 0x20 )

/* Constants for writing to UCSRC. */
#define serUCSRC_SELECT					( ( unsigned portCHAR ) 0x80 )
#define serEIGHT_DATA_BITS				( ( unsigned portCHAR ) 0x06 )

static xQueueHandle xRxedChars;
static xQueueHandle xCharsForTx;

#define vInterruptOn()										\
{															\
	unsigned portCHAR ucByte;								\
															\
	ucByte = UCSRB;											\
	ucByte |= serTX_INT_ENABLE;								\
	outb( UCSRB, ucByte );									\
}																				
/*-----------------------------------------------------------*/

#define vInterruptOff()										\
{															\
	unsigned portCHAR ucByte;								\
															\
	ucByte = UCSRB;											\
	ucByte &= ~serTX_INT_ENABLE;							\
	outb( UCSRB, ucByte );									\
}
/*-----------------------------------------------------------*/

xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
{
unsigned portLONG ulBaudRateCounter;
unsigned portCHAR ucByte;

	portENTER_CRITICAL();
	{
		/* Create the queues used by the com test task. */
		xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
		xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );

		/* Calculate the baud rate register value from the equation in the
		data sheet. */
		ulBaudRateCounter = ( configCPU_CLOCK_HZ / ( serBAUD_DIV_CONSTANT * ulWantedBaud ) ) - ( unsigned portLONG ) 1;

		/* Set the baud rate. */	
		ucByte = ( unsigned portCHAR ) ( ulBaudRateCounter & ( unsigned portLONG ) 0xff );	
		outb( UBRRL, ucByte );

		ulBaudRateCounter >>= ( unsigned portLONG ) 8;
		ucByte = ( unsigned portCHAR ) ( ulBaudRateCounter & ( unsigned portLONG ) 0xff );	
		outb( UBRRH, ucByte );

		/* Enable the Rx interrupt.  The Tx interrupt will get enabled
		later. Also enable the Rx and Tx. */
		outb( UCSRB, serRX_INT_ENABLE | serRX_ENABLE | serTX_ENABLE );

		/* Set the data bits to 8. */
		outb( UCSRC, serUCSRC_SELECT | serEIGHT_DATA_BITS );
	}
	portEXIT_CRITICAL();
	
	/* Unlike other ports, this serial code does not allow for more than one
	com port.  We therefore don't return a pointer to a port structure and can
	instead just return NULL. */
	return NULL;
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
{
	/* Get the next character from the buffer.  Return false if no characters
	are available, or arrive before xBlockTime expires. */
	if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
	{
		return pdTRUE;
	}
	else
	{
		return pdFALSE;
	}
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
{
	/* Return false if after the block time there is no room on the Tx queue. */
	if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
	{
		return pdFAIL;
	}

	vInterruptOn();

	return pdPASS;
}
/*-----------------------------------------------------------*/

void vSerialClose( xComPortHandle xPort )
{
unsigned portCHAR ucByte;

	/* Turn off the interrupts.  We may also want to delete the queues and/or
	re-install the original ISR. */

	portENTER_CRITICAL();
	{
		vInterruptOff();
		ucByte = UCSRB;
		ucByte &= ~serRX_INT_ENABLE;
		outb( UCSRB, ucByte );
	}
	portEXIT_CRITICAL();
}
/*-----------------------------------------------------------*/

__interrupt void SIG_UART_RECV( void )
{
signed portCHAR ucChar, xHigherPriorityTaskWoken = pdFALSE;

	/* Get the character and post it on the queue of Rxed characters.
	If the post causes a task to wake force a context switch as the woken task
	may have a higher priority than the task we have interrupted. */
	ucChar = UDR;

	xQueueSendFromISR( xRxedChars, &ucChar, &xHigherPriorityTaskWoken );

	if( xHigherPriorityTaskWoken != pdFALSE )
	{
		taskYIELD();
	}
}
/*-----------------------------------------------------------*/

__interrupt void SIG_UART_DATA( void )
{
signed portCHAR cChar, cTaskWoken = pdFALSE;

	if( xQueueReceiveFromISR( xCharsForTx, &cChar, &cTaskWoken ) == pdTRUE )
	{
		/* Send the next character queued for Tx. */
		outb( UDR, cChar );
	}
	else
	{
		/* Queue empty, nothing to send. */
		vInterruptOff();
	}
}