/*
	FreeRTOS V5.4.1 - Copyright (C) 2009 Real Time Engineers Ltd.

	This file is part of the FreeRTOS distribution.

	FreeRTOS is free software; you can redistribute it and/or modify it	under 
	the terms of the GNU General Public License (version 2) as published by the 
	Free Software Foundation and modified by the FreeRTOS exception.
	**NOTE** The exception to the GPL is included to allow you to distribute a
	combined work that includes FreeRTOS without being obliged to provide the 
	source code for proprietary components outside of the FreeRTOS kernel.  
	Alternative commercial license and support terms are also available upon 
	request.  See the licensing section of http://www.FreeRTOS.org for full 
	license details.

	FreeRTOS is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
	more details.

	You should have received a copy of the GNU General Public License along
	with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.


	***************************************************************************
	*                                                                         *
	* Looking for a quick start?  Then check out the FreeRTOS eBook!          *
	* See http://www.FreeRTOS.org/Documentation for details                   *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/


/* Scheduler includes. */
#include "FreeRTOS.h"

/* Demo application includes. */
#include "partest.h"

/* Library includes. */
#include "xparameters.h"
#include "xgpio_l.h"

/* Misc hardware specific definitions. */
#define partstALL_AS_OUTPUT	0x00
#define partstCHANNEL_1		0x01
#define partstMAX_8BIT_LED	0x07

/* The outputs are split into two IO sections, these variables maintain the 
current value of either section. */
static unsigned portBASE_TYPE uxCurrentOutput8Bit, uxCurrentOutput5Bit;

/*-----------------------------------------------------------*/
/*
 * Setup the IO for the LED outputs.
 */
void vParTestInitialise( void )
{
	/* Set both sets of LED's on the demo board to outputs. */
	XGpio_mSetDataDirection( XPAR_LEDS_8BIT_BASEADDR, partstCHANNEL_1, partstALL_AS_OUTPUT );
	XGpio_mSetDataDirection( XPAR_LEDS_POSITIONS_BASEADDR, partstCHANNEL_1, partstALL_AS_OUTPUT );

	/* Start with all outputs off. */
	uxCurrentOutput8Bit = 0;
	XGpio_mSetDataReg( XPAR_LEDS_8BIT_BASEADDR, partstCHANNEL_1, 0x00 );
	uxCurrentOutput5Bit = 0;
	XGpio_mSetDataReg( XPAR_LEDS_POSITIONS_BASEADDR, partstCHANNEL_1, 0x00 );
}
/*-----------------------------------------------------------*/

void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
{
unsigned portBASE_TYPE uxBaseAddress, *puxCurrentValue;

	portENTER_CRITICAL();
	{
		/* Which IO section does the LED being set/cleared belong to?  The
		4 bit or 5 bit outputs? */
		if( uxLED <= partstMAX_8BIT_LED )
		{
			uxBaseAddress = XPAR_LEDS_8BIT_BASEADDR;
			puxCurrentValue = &uxCurrentOutput5Bit;
		}	
		else
		{
			uxBaseAddress = XPAR_LEDS_POSITIONS_BASEADDR;
			puxCurrentValue = &uxCurrentOutput8Bit;
			uxLED -= partstMAX_8BIT_LED;
		}

		/* Setup the bit mask accordingly. */
		uxLED = 0x01 << uxLED;

		/* Maintain the current output value. */
		if( xValue )
		{
			*puxCurrentValue |= uxLED;
		}
		else
		{
			*puxCurrentValue &= ~uxLED;
		}

		/* Write the value to the port. */
		XGpio_mSetDataReg( uxBaseAddress, partstCHANNEL_1, *puxCurrentValue );
	}
	portEXIT_CRITICAL();
}
/*-----------------------------------------------------------*/

void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
{
unsigned portBASE_TYPE uxBaseAddress, *puxCurrentValue;

	portENTER_CRITICAL();
	{
		/* Which IO section does the LED being toggled belong to?  The
		4 bit or 5 bit outputs? */
		if( uxLED <= partstMAX_8BIT_LED )
		{

			uxBaseAddress = XPAR_LEDS_8BIT_BASEADDR;
			puxCurrentValue = &uxCurrentOutput5Bit;
		}	
		else
		{
			uxBaseAddress = XPAR_LEDS_POSITIONS_BASEADDR;
			puxCurrentValue = &uxCurrentOutput8Bit;
			uxLED -= partstMAX_8BIT_LED;
		}

		/* Setup the bit mask accordingly. */
		uxLED = 0x01 << uxLED;

		/* Maintain the current output value. */
		if( *puxCurrentValue & uxLED )
		{
			*puxCurrentValue &= ~uxLED;
		}
		else
		{
			*puxCurrentValue |= uxLED;
		}

		/* Write the value to the port. */
		XGpio_mSetDataReg(uxBaseAddress, partstCHANNEL_1, *puxCurrentValue );
	}
	portEXIT_CRITICAL();
}