/*
	FreeRTOS V5.4.1 - Copyright (C) 2009 Real Time Engineers Ltd.

	This file is part of the FreeRTOS distribution.

	FreeRTOS is free software; you can redistribute it and/or modify it	under 
	the terms of the GNU General Public License (version 2) as published by the 
	Free Software Foundation and modified by the FreeRTOS exception.
	**NOTE** The exception to the GPL is included to allow you to distribute a
	combined work that includes FreeRTOS without being obliged to provide the 
	source code for proprietary components outside of the FreeRTOS kernel.  
	Alternative commercial license and support terms are also available upon 
	request.  See the licensing section of http://www.FreeRTOS.org for full 
	license details.

	FreeRTOS is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
	more details.

	You should have received a copy of the GNU General Public License along
	with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.


	***************************************************************************
	*                                                                         *
	* Looking for a quick start?  Then check out the FreeRTOS eBook!          *
	* See http://www.FreeRTOS.org/Documentation for details                   *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/


/* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER.   
 * 
 * This file only supports UART 1
 */

/* Standard includes. */
#include <stdlib.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "queue.h"
#include "task.h"

/* Demo application includes. */
#include "serial.h"

/* Constants required to setup the hardware. */
#define serTX_AND_RX			( ( unsigned portCHAR ) 0x03 )

/* Misc. constants. */
#define serNO_BLOCK				( ( portTickType ) 0 )

/* Enable the UART Tx interrupt. */
#define vInterruptOn() IFG2 |= UTXIFG1

/* The queue used to hold received characters. */
static xQueueHandle xRxedChars; 

/* The queue used to hold characters waiting transmission. */
static xQueueHandle xCharsForTx; 

static volatile portSHORT sTHREEmpty;

/*-----------------------------------------------------------*/

xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
{
unsigned portLONG ulBaudRateCount;

	/* Initialise the hardware. */

	/* Generate the baud rate constants for the wanted baud rate. */
	ulBaudRateCount = configCPU_CLOCK_HZ / ulWantedBaud;

	portENTER_CRITICAL();
	{
		/* Create the queues used by the com test task. */
		xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
		xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );

		/* Reset UART. */
		UCTL1 |= SWRST;

		/* Set pin function. */
		P4SEL |= serTX_AND_RX;

		/* All other bits remain at zero for n, 8, 1 interrupt driven operation. 
		LOOPBACK MODE!*/
		U1CTL |= CHAR + LISTEN;
		U1TCTL |= SSEL1;

		/* Setup baud rate low byte. */
		U1BR0 = ( unsigned portCHAR ) ( ulBaudRateCount & ( unsigned portLONG ) 0xff );

		/* Setup baud rate high byte. */
		ulBaudRateCount >>= 8UL;
		U1BR1 = ( unsigned portCHAR ) ( ulBaudRateCount & ( unsigned portLONG ) 0xff );

		/* Enable ports. */
		ME2 |= UTXE1 + URXE1;

		/* Set. */
		UCTL1 &= ~SWRST;

		/* Nothing in the buffer yet. */
		sTHREEmpty = pdTRUE;

		/* Enable interrupts. */
		IE2 |= URXIE1 + UTXIE1;
	}
	portEXIT_CRITICAL();
	
	/* Unlike other ports, this serial code does not allow for more than one
	com port.  We therefore don't return a pointer to a port structure and can
	instead just return NULL. */
	return NULL;
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
{
	/* Get the next character from the buffer.  Return false if no characters
	are available, or arrive before xBlockTime expires. */
	if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
	{
		return pdTRUE;
	}
	else
	{
		return pdFALSE;
	}
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
{
signed portBASE_TYPE xReturn;

	/* Transmit a character. */

	portENTER_CRITICAL();
	{
		if( sTHREEmpty == pdTRUE )
		{
			/* If sTHREEmpty is true then the UART Tx ISR has indicated that 
			there are no characters queued to be transmitted - so we can
			write the character directly to the shift Tx register. */
			sTHREEmpty = pdFALSE;
			U1TXBUF = cOutChar;
			xReturn = pdPASS;
		}
		else
		{
			/* sTHREEmpty is false, so there are still characters waiting to be
			transmitted.  We have to queue this character so it gets 
			transmitted	in turn. */

			/* Return false if after the block time there is no room on the Tx 
			queue.  It is ok to block inside a critical section as each task
			maintains it's own critical section status. */
			xReturn = xQueueSend( xCharsForTx, &cOutChar, xBlockTime );

			/* Depending on queue sizing and task prioritisation:  While we 
			were blocked waiting to post on the queue interrupts were not 
			disabled.  It is possible that the serial ISR has emptied the 
			Tx queue, in which case we need to start the Tx off again
			writing directly to the Tx register. */
			if( ( sTHREEmpty == pdTRUE ) && ( xReturn == pdPASS ) )
			{
				/* Get back the character we just posted. */
				xQueueReceive( xCharsForTx, &cOutChar, serNO_BLOCK );
				sTHREEmpty = pdFALSE;
				U1TXBUF = cOutChar;
			}
		}
	}
	portEXIT_CRITICAL();

	return pdPASS;
}
/*-----------------------------------------------------------*/

#if configINTERRUPT_EXAMPLE_METHOD == 1

	/*
	 * UART RX interrupt service routine.
	 */
	void vRxISR( void ) __interrupt[ UART1RX_VECTOR ]
	{
	signed portCHAR cChar;
	portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
	
		/* Get the character from the UART and post it on the queue of Rxed 
		characters. */
		cChar = U1RXBUF;
	
		xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );

		if( xHigherPriorityTaskWoken )
		{
			/*If the post causes a task to wake force a context switch 
			as the woken task may have a higher priority than the task we have 
			interrupted. */
			taskYIELD();
		}

        /* Make sure any low power mode bits are clear before leaving the ISR. */
        __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
	}
	/*-----------------------------------------------------------*/
	
	/*
	 * UART Tx interrupt service routine.
	 */
	void vTxISR( void ) __interrupt[ UART1TX_VECTOR ]
	{
	signed portCHAR cChar;
	portBASE_TYPE xTaskWoken = pdFALSE;
	
		/* The previous character has been transmitted.  See if there are any
		further characters waiting transmission. */
	
		if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE )
		{
			/* There was another character queued - transmit it now. */
			U1TXBUF = cChar;
		}
		else
		{
			/* There were no other characters to transmit. */
			sTHREEmpty = pdTRUE;
		}

        /* Make sure any low power mode bits are clear before leaving the ISR. */
        __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
	}
    /*-----------------------------------------------------------*/

#elif configINTERRUPT_EXAMPLE_METHOD == 2

    /* This is a standard C function as an assembly file wrapper is used as an
    interrupt entry point. */
	void vRxISR( void )
	{
	signed portCHAR cChar;
	portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
	
		/* Get the character from the UART and post it on the queue of Rxed 
		characters. */
		cChar = U1RXBUF;
	
		xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );

        /*If the post causes a task to wake force a context switch 
        as the woken task may have a higher priority than the task we have 
        interrupted. */
        portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
	}
	/*-----------------------------------------------------------*/
	
    /* This is a standard C function as an assembly file wrapper is used as an
    interrupt entry point. */
	void vTxISR( void )
	{
	signed portCHAR cChar;
	portBASE_TYPE xTaskWoken = pdFALSE;
	
		/* The previous character has been transmitted.  See if there are any
		further characters waiting transmission. */
	
		if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xTaskWoken ) == pdTRUE )
		{
			/* There was another character queued - transmit it now. */
			U1TXBUF = cChar;
		}
		else
		{
			/* There were no other characters to transmit. */
			sTHREEmpty = pdTRUE;
		}
	}

#endif /* configINTERRUPT_EXAMPLE_METHOD */
/*-----------------------------------------------------------*/