/*
    FreeRTOS V8.2.0 - Copyright (C) 2015 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

	***************************************************************************
    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<
	***************************************************************************

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
	the FAQ page "My application does not run, what could be wrong?".  Have you
	defined configASSERT()?

	http://www.FreeRTOS.org/support - In return for receiving this top quality
	embedded software for free we request you assist our global community by
	participating in the support forum.

	http://www.FreeRTOS.org/training - Investing in training allows your team to
	be as productive as possible as early as possible.  Now you can receive
	FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
	Ltd, and the world's leading authority on the world's leading RTOS.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/


/* 
	BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART
*/

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "queue.h"
#include "task.h"

/* Demo application includes. */
#include "serial.h"

/* Microblaze driver includes. */
#include "xuartlite_l.h"
#include "xintc_l.h"

/*-----------------------------------------------------------*/

/* Queues used to hold received characters, and characters waiting to be
transmitted. */
static QueueHandle_t xRxedChars; 
static QueueHandle_t xCharsForTx; 

/*-----------------------------------------------------------*/

xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
{
unsigned long ulControlReg, ulMask;

	/* NOTE: The baud rate used by this driver is determined by the hardware
	parameterization of the UART Lite peripheral, and the baud value passed to
	this function has no effect. */

	/* Create the queues used to hold Rx and Tx characters. */
	xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
	xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) );

	if( ( xRxedChars ) && ( xCharsForTx ) )
	{
		/* Disable the interrupt. */
		XUartLite_mDisableIntr( XPAR_RS232_UART_BASEADDR );
		
		/* Flush the fifos. */
		ulControlReg = XIo_In32( XPAR_RS232_UART_BASEADDR + XUL_STATUS_REG_OFFSET );
		XIo_Out32( XPAR_RS232_UART_BASEADDR + XUL_CONTROL_REG_OFFSET, ulControlReg | XUL_CR_FIFO_TX_RESET | XUL_CR_FIFO_RX_RESET );

		/* Enable the interrupt again.  The interrupt controller has not yet been 
		initialised so there is no chance of receiving an interrupt until the 
		scheduler has been started. */
		XUartLite_mEnableIntr( XPAR_RS232_UART_BASEADDR );

		/* Enable the interrupt in the interrupt controller while maintaining 
		all the other bit settings. */
		ulMask = XIntc_In32( ( XPAR_OPB_INTC_0_BASEADDR + XIN_IER_OFFSET ) );
		ulMask |= XPAR_RS232_UART_INTERRUPT_MASK;
		XIntc_Out32( ( XPAR_OPB_INTC_0_BASEADDR + XIN_IER_OFFSET ), ( ulMask ) );
		XIntc_mAckIntr( XPAR_INTC_SINGLE_BASEADDR, 2 );
	}
	
	return ( xComPortHandle ) 0;
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, TickType_t xBlockTime )
{
	/* The port handle is not required as this driver only supports one UART. */
	( void ) pxPort;

	/* Get the next character from the buffer.  Return false if no characters
	are available, or arrive before xBlockTime expires. */
	if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
	{
		return pdTRUE;
	}
	else
	{
		return pdFALSE;
	}
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, TickType_t xBlockTime )
{
portBASE_TYPE xReturn = pdTRUE;

	portENTER_CRITICAL();
	{
		/* If the UART FIFO is full we can block posting the new data on the
		Tx queue. */
		if( XUartLite_mIsTransmitFull( XPAR_RS232_UART_BASEADDR ) )
		{
			if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
			{
				xReturn = pdFAIL;
			}
		}
		/* Otherwise, if there is data already in the queue we should add the
		new data to the back of the queue to ensure the sequencing is 
		maintained. */
		else if( uxQueueMessagesWaiting( xCharsForTx ) )
		{
			if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
			{
				xReturn = pdFAIL;
			}			
		}
		/* If the UART FIFO is not full and there is no data already in the
		queue we can write directly to the FIFO without disrupting the 
		sequence. */
		else
		{
			XIo_Out32( XPAR_RS232_UART_BASEADDR + XUL_TX_FIFO_OFFSET, cOutChar );
		}
	}
	portEXIT_CRITICAL();

	return xReturn;
}
/*-----------------------------------------------------------*/

void vSerialClose( xComPortHandle xPort )
{
	/* Not supported as not required by the demo application. */
	( void ) xPort;
}
/*-----------------------------------------------------------*/

void vSerialISR( void *pvBaseAddress )
{
unsigned long ulISRStatus;
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
char cChar;

	/* Determine the cause of the interrupt. */
    ulISRStatus = XIo_In32( XPAR_RS232_UART_BASEADDR + XUL_STATUS_REG_OFFSET );

    if( ( ulISRStatus & ( XUL_SR_RX_FIFO_FULL | XUL_SR_RX_FIFO_VALID_DATA ) ) != 0 )
	{
		/* A character is available - place it in the queue of received
		characters.  This might wake a task that was blocked waiting for 
		data. */
		cChar = ( char )XIo_In32( XPAR_RS232_UART_BASEADDR + XUL_RX_FIFO_OFFSET );
		xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
    }

    if( ( ulISRStatus & XUL_SR_TX_FIFO_EMPTY ) != 0 )
    {
		/* There is space in the FIFO - if there are any characters queue for
		transmission they can be send to the UART now.  This might unblock a
		task that was waiting for space to become available on the Tx queue. */
		if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
		{
			XIo_Out32( XPAR_RS232_UART_BASEADDR + XUL_TX_FIFO_OFFSET, cChar );
		}
    }

	/* If we woke any tasks we may require a context switch. */
	if( xHigherPriorityTaskWoken )
	{
		portYIELD_FROM_ISR();
	}
}