/*
    FreeRTOS V8.2.0 - Copyright (C) 2015 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

	***************************************************************************
    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<
	***************************************************************************

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
	the FAQ page "My application does not run, what could be wrong?".  Have you
	defined configASSERT()?

	http://www.FreeRTOS.org/support - In return for receiving this top quality
	embedded software for free we request you assist our global community by
	participating in the support forum.

	http://www.FreeRTOS.org/training - Investing in training allows your team to
	be as productive as possible as early as possible.  Now you can receive
	FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
	Ltd, and the world's leading authority on the world's leading RTOS.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

#include <xc.h>
#include <sys/asm.h>
#include "ISR_Support.h"


	.set	nomips16
 	.set 	noreorder

 	.extern pxCurrentTCB
 	.extern vTaskSwitchContext
 	.extern vPortIncrementTick
	.extern xISRStackTop

 	.global vPortStartFirstTask
	.global vPortYieldISR
	.global vPortTickInterruptHandler


/******************************************************************/

 	.set		noreorder
	.set 		noat
 	.ent		vPortTickInterruptHandler

vPortTickInterruptHandler:

	portSAVE_CONTEXT

	jal 		vPortIncrementTick
	nop

	portRESTORE_CONTEXT

	.end vPortTickInterruptHandler

/******************************************************************/

 	.set		noreorder
	.set 		noat
 	.ent		vPortStartFirstTask

vPortStartFirstTask:

	/* Simply restore the context of the highest priority task that has been
	created so far. */
	portRESTORE_CONTEXT

	.end vPortStartFirstTask



/*******************************************************************/

	.set		noreorder
	.set 		noat
	.ent		vPortYieldISR

vPortYieldISR:

	/* Make room for the context. First save the current status so it can be
	manipulated. */
	addiu		sp, sp, -portCONTEXT_SIZE
	mfc0		k1, _CP0_STATUS

	/* Also save s6 and s5 so they can be used.  Any nesting interrupts should
	maintain the values of these registers across the ISR. */
	sw			s6, 44(sp)
	sw			s5, 40(sp)
	sw			k1, portSTATUS_STACK_LOCATION(sp)

	/* Prepare to re-enabled interrupt above the kernel priority. */
	ins 		k1, zero, 10, 6
	ori			k1, k1, ( configMAX_SYSCALL_INTERRUPT_PRIORITY << 10 )
	ins			k1, zero, 1, 4

	/* s5 is used as the frame pointer. */
	add			s5, zero, sp

	/* Swap to the system stack.  This is not conditional on the nesting
	count as this interrupt is always the lowest priority and therefore
	the nesting is always 0. */
	la			sp, xISRStackTop
	lw			sp, (sp)

	/* Set the nesting count. */
	la			k0, uxInterruptNesting
	addiu		s6, zero, 1
	sw			s6, 0(k0)

	/* s6 holds the EPC value, this is saved with the rest of the context
	after interrupts are enabled. */
	mfc0 		s6, _CP0_EPC

	/* Re-enable interrupts above configMAX_SYSCALL_INTERRUPT_PRIORITY. */
	mtc0		k1, _CP0_STATUS

	/* Save the context into the space just created.  s6 is saved again
	here as it now contains the EPC value. */
	sw			ra, 120(s5)
	sw			s8, 116(s5)
	sw			t9, 112(s5)
	sw			t8, 108(s5)
	sw			t7, 104(s5)
	sw			t6, 100(s5)
	sw			t5, 96(s5)
	sw			t4, 92(s5)
	sw			t3, 88(s5)
	sw			t2, 84(s5)
	sw			t1, 80(s5)
	sw			t0, 76(s5)
	sw			a3, 72(s5)
	sw			a2, 68(s5)
	sw			a1, 64(s5)
	sw			a0, 60(s5)
	sw			v1, 56(s5)
	sw			v0, 52(s5)
	sw			s7, 48(s5)
	sw			s6, portEPC_STACK_LOCATION(s5)
	/* s5 and s6 has already been saved. */
	sw			s4, 36(s5)
	sw			s3, 32(s5)
	sw			s2, 28(s5)
	sw			s1, 24(s5)
	sw			s0, 20(s5)
	sw			$1, 16(s5)

	/* s7 is used as a scratch register as this should always be saved across
	nesting interrupts. */
	mfhi		s7
	sw			s7, 12(s5)
	mflo		s7
	sw			s7, 8(s5)

	/* Save the stack pointer to the task. */
	la			s7, pxCurrentTCB
	lw			s7, (s7)
	sw			s5, (s7)

	/* Set the interrupt mask to the max priority that can use the API.  The
	yield handler will only be called at configKERNEL_INTERRUPT_PRIORITY which
	is below configMAX_SYSCALL_INTERRUPT_PRIORITY - so this can only ever
	raise the IPL value and never lower it. */
	di
	ehb
	mfc0		s7, _CP0_STATUS
	ins 		s7, zero, 10, 6
	ori			s6, s7, ( configMAX_SYSCALL_INTERRUPT_PRIORITY << 10 ) | 1

	/* This mtc0 re-enables interrupts, but only above
	configMAX_SYSCALL_INTERRUPT_PRIORITY. */
	mtc0		s6, _CP0_STATUS
	ehb

	/* Clear the software interrupt in the core. */
	mfc0		s6, _CP0_CAUSE
	ins			s6, zero, 8, 1
	mtc0		s6, _CP0_CAUSE
	ehb

	/* Clear the interrupt in the interrupt controller. */
	la			s6, IFS0CLR
	addiu		s4, zero, 2
	sw			s4, (s6)

	jal			vTaskSwitchContext
	nop

	/* Clear the interrupt mask again.  The saved status value is still in s7. */
	mtc0		s7, _CP0_STATUS
	ehb

	/* Restore the stack pointer from the TCB. */
	la			s0, pxCurrentTCB
	lw			s0, (s0)
	lw			s5, (s0)

	/* Restore the rest of the context. */
	lw			s0, 8(s5)
	mtlo		s0
	lw			s0, 12(s5)
	mthi		s0
	lw			$1, 16(s5)
	lw			s0, 20(s5)
	lw			s1, 24(s5)
	lw			s2, 28(s5)
	lw			s3, 32(s5)
	lw			s4, 36(s5)
	/* s5 is loaded later. */
	lw			s6, 44(s5)
	lw			s7, 48(s5)
	lw			v0, 52(s5)
	lw			v1, 56(s5)
	lw			a0, 60(s5)
	lw			a1, 64(s5)
	lw			a2, 68(s5)
	lw			a3, 72(s5)
	lw			t0, 76(s5)
	lw			t1, 80(s5)
	lw			t2, 84(s5)
	lw			t3, 88(s5)
	lw			t4, 92(s5)
	lw			t5, 96(s5)
	lw			t6, 100(s5)
	lw			t7, 104(s5)
	lw			t8, 108(s5)
	lw			t9, 112(s5)
	lw			s8, 116(s5)
	lw			ra, 120(s5)

	/* Protect access to the k registers, and others. */
	di
	ehb

	/* Set nesting back to zero.  As the lowest priority interrupt this
	interrupt cannot have nested. */
	la			k0, uxInterruptNesting
	sw			zero, 0(k0)

	/* Switch back to use the real stack pointer. */
	add			sp, zero, s5

	/* Restore the real s5 value. */
	lw			s5, 40(sp)

	/* Pop the status and epc values. */
	lw			k1, portSTATUS_STACK_LOCATION(sp)
	lw			k0, portEPC_STACK_LOCATION(sp)

	/* Remove stack frame. */
	addiu		sp, sp, portCONTEXT_SIZE

	mtc0		k1, _CP0_STATUS
	mtc0 		k0, _CP0_EPC
	ehb
	eret
	nop

	.end		vPortYieldISR