/*
	FreeRTOS.org V5.1.2 - Copyright (C) 2003-2009 Richard Barry.

	This file is part of the FreeRTOS.org distribution.

	FreeRTOS.org is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	FreeRTOS.org is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with FreeRTOS.org; if not, write to the Free Software
	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

	A special exception to the GPL can be applied should you wish to distribute
	a combined work that includes FreeRTOS.org, without being obliged to provide
	the source code for any proprietary components.  See the licensing section
	of http://www.FreeRTOS.org for full details of how and when the exception
	can be applied.

    ***************************************************************************
    ***************************************************************************
    *                                                                         *
    * Get the FreeRTOS eBook!  See http://www.FreeRTOS.org/Documentation      *
	*                                                                         *
	* This is a concise, step by step, 'hands on' guide that describes both   *
	* general multitasking concepts and FreeRTOS specifics. It presents and   *
	* explains numerous examples that are written using the FreeRTOS API.     *
	* Full source code for all the examples is provided in an accompanying    *
	* .zip file.                                                              *
    *                                                                         *
    ***************************************************************************
    ***************************************************************************

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and 
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety 
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting, 
	licensing and training services.
*/

#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

/* Device specific includes. */
#include "mb96348hs.h"

/* 
 * The below define should be same as the option selected by the Memory 
 * Model (Project->Setup Project->C Compiler->Category->Target Depend ) 
 *
 * Valid settings here include:
 * ------- Memory models ---------      Data	  Code
 * portSMALL							16 Bit    16 Bit
 * portMEDIUM							16 Bit    24 Bit
 * portCOMPACT							24 Bit    16 Bit
 * portLARGE							24 Bit    24 Bit
 */
#define configMEMMODEL portMEDIUM

/* Demo specific definition - set this to 1 if you want to include the task
that writes trace and debug information to the UART.  If it is set to 0 then
the ComTest tasks will be included in place of the trace task. */
#define INCLUDE_TraceListTasks		0

/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
 *----------------------------------------------------------*/
#define configUSE_PREEMPTION		1
#define configUSE_IDLE_HOOK			1
#define configUSE_TICK_HOOK			0
#define configMINIMAL_STACK_SIZE	( ( unsigned portSHORT ) 180 ) /* This can be greatly reduced when using the small or medium memory model. */
#define configCPU_CLOCK_HZ			( ( unsigned portLONG ) 56000000 )	/* Clock setup from start.asm in the demo application. */
#define configCLKP1_CLOCK_HZ		( ( unsigned portLONG ) 56000000 )	/* Clock setup from start.asm in the demo application. */
#define configTICK_RATE_HZ			( (portTickType) 1000 )
#define configMAX_PRIORITIES		( ( unsigned portBASE_TYPE ) 6 )
#define configTOTAL_HEAP_SIZE		( (size_t) (20000) )
#define configMAX_TASK_NAME_LEN		( 20 )
#define configUSE_16_BIT_TICKS		1
#define configIDLE_SHOULD_YIELD		1
#define configUSE_MUTEXES			1
#define configUSE_TRACE_FACILITY	1

/* Co-routine definitions. */
#define configUSE_CO_ROUTINES			1
#define configMAX_CO_ROUTINE_PRIORITIES ( 4 )

/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */
#define INCLUDE_vTaskPrioritySet			1
#define INCLUDE_uxTaskPriorityGet			1
#define INCLUDE_vTaskDelete					1
#define INCLUDE_vTaskCleanUpResources		1
#define INCLUDE_vTaskSuspend				1
#define INCLUDE_vResumeFromISR				1
#define INCLUDE_vTaskDelayUntil				1
#define INCLUDE_vTaskDelay					1
#define INCLUDE_xTaskGetSchedulerState		1
#define INCLUDE_xTaskGetCurrentTaskHandle	1


#define configKERNEL_INTERRUPT_PRIORITY 6

#endif /* FREERTOS_CONFIG_H */