/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

/*-----------------------------------------------------------
* Portable layer API.  Each function must be defined for each port.
*----------------------------------------------------------*/

#ifndef PORTABLE_H
    #define PORTABLE_H

/* Each FreeRTOS port has a unique portmacro.h header file.  Originally a
 * pre-processor definition was used to ensure the pre-processor found the correct
 * portmacro.h file for the port being used.  That scheme was deprecated in favour
 * of setting the compiler's include path such that it found the correct
 * portmacro.h file - removing the need for the constant and allowing the
 * portmacro.h file to be located anywhere in relation to the port being used.
 * Purely for reasons of backward compatibility the old method is still valid, but
 * to make it clear that new projects should not use it, support for the port
 * specific constants has been moved into the deprecated_definitions.h header
 * file. */
    #include "deprecated_definitions.h"

/* If portENTER_CRITICAL is not defined then including deprecated_definitions.h
 * did not result in a portmacro.h header file being included - and it should be
 * included here.  In this case the path to the correct portmacro.h header file
 * must be set in the compiler's include path. */
    #ifndef portENTER_CRITICAL
        #include "portmacro.h"
    #endif

    #if portBYTE_ALIGNMENT == 32
        #define portBYTE_ALIGNMENT_MASK    ( 0x001f )
    #endif

    #if portBYTE_ALIGNMENT == 16
        #define portBYTE_ALIGNMENT_MASK    ( 0x000f )
    #endif

    #if portBYTE_ALIGNMENT == 8
        #define portBYTE_ALIGNMENT_MASK    ( 0x0007 )
    #endif

    #if portBYTE_ALIGNMENT == 4
        #define portBYTE_ALIGNMENT_MASK    ( 0x0003 )
    #endif

    #if portBYTE_ALIGNMENT == 2
        #define portBYTE_ALIGNMENT_MASK    ( 0x0001 )
    #endif

    #if portBYTE_ALIGNMENT == 1
        #define portBYTE_ALIGNMENT_MASK    ( 0x0000 )
    #endif

    #ifndef portBYTE_ALIGNMENT_MASK
        #error "Invalid portBYTE_ALIGNMENT definition"
    #endif

    #ifndef portNUM_CONFIGURABLE_REGIONS
        #define portNUM_CONFIGURABLE_REGIONS    1
    #endif

    #ifndef portHAS_STACK_OVERFLOW_CHECKING
        #define portHAS_STACK_OVERFLOW_CHECKING    0
    #endif

    #ifndef portARCH_NAME
        #define portARCH_NAME    NULL
    #endif

    #ifdef __cplusplus
        extern "C" {
    #endif

    #include "mpu_wrappers.h"

/*
 * Setup the stack of a new task so it is ready to be placed under the
 * scheduler control.  The registers have to be placed on the stack in
 * the order that the port expects to find them.
 *
 */
    #if ( portUSING_MPU_WRAPPERS == 1 )
        #if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
            StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
                                                 StackType_t * pxEndOfStack,
                                                 TaskFunction_t pxCode,
                                                 void * pvParameters,
                                                 BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
        #else
            StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
                                                 TaskFunction_t pxCode,
                                                 void * pvParameters,
                                                 BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
        #endif
    #else /* if ( portUSING_MPU_WRAPPERS == 1 ) */
        #if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
            StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
                                                 StackType_t * pxEndOfStack,
                                                 TaskFunction_t pxCode,
                                                 void * pvParameters ) PRIVILEGED_FUNCTION;
        #else
            StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
                                                 TaskFunction_t pxCode,
                                                 void * pvParameters ) PRIVILEGED_FUNCTION;
        #endif
    #endif /* if ( portUSING_MPU_WRAPPERS == 1 ) */

/* Used by heap_5.c to define the start address and size of each memory region
 * that together comprise the total FreeRTOS heap space. */
    typedef struct HeapRegion
    {
        uint8_t * pucStartAddress;
        size_t xSizeInBytes;
    } HeapRegion_t;

/* Used to pass information about the heap out of vPortGetHeapStats(). */
    typedef struct xHeapStats
    {
        size_t xAvailableHeapSpaceInBytes;      /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
        size_t xSizeOfLargestFreeBlockInBytes;  /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
        size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
        size_t xNumberOfFreeBlocks;             /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
        size_t xMinimumEverFreeBytesRemaining;  /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
        size_t xNumberOfSuccessfulAllocations;  /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
        size_t xNumberOfSuccessfulFrees;        /* The number of calls to vPortFree() that has successfully freed a block of memory. */
    } HeapStats_t;

/*
 * Used to define multiple heap regions for use by heap_5.c.  This function
 * must be called before any calls to pvPortMalloc() - not creating a task,
 * queue, semaphore, mutex, software timer, event group, etc. will result in
 * pvPortMalloc being called.
 *
 * pxHeapRegions passes in an array of HeapRegion_t structures - each of which
 * defines a region of memory that can be used as the heap.  The array is
 * terminated by a HeapRegions_t structure that has a size of 0.  The region
 * with the lowest start address must appear first in the array.
 */
    void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;

/*
 * Returns a HeapStats_t structure filled with information about the current
 * heap state.
 */
    void vPortGetHeapStats( HeapStats_t * pxHeapStats );

/*
 * Map to the memory management routines required for the port.
 */
    void * pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
    void vPortFree( void * pv ) PRIVILEGED_FUNCTION;
    void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
    size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
    size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;

/*
 * Setup the hardware ready for the scheduler to take control.  This generally
 * sets up a tick interrupt and sets timers for the correct tick frequency.
 */
    BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;

/*
 * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
 * the hardware is left in its original condition after the scheduler stops
 * executing.
 */
    void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;

/*
 * The structures and methods of manipulating the MPU are contained within the
 * port layer.
 *
 * Fills the xMPUSettings structure with the memory region information
 * contained in xRegions.
 */
    #if ( portUSING_MPU_WRAPPERS == 1 )
        struct xMEMORY_REGION;
        void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
                                        const struct xMEMORY_REGION * const xRegions,
                                        StackType_t * pxBottomOfStack,
                                        uint32_t ulStackDepth ) PRIVILEGED_FUNCTION;
    #endif

    #ifdef __cplusplus
        }
    #endif

#endif /* PORTABLE_H */