/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */


/*-----------------------------------------------------------
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c  The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/* Constants required to handle interrupts. */
#define portTIMER_MATCH_ISR_BIT    ( ( uint8_t ) 0x01 )
#define portCLEAR_VIC_INTERRUPT    ( ( uint32_t ) 0 )

/* Constants required to handle critical sections. */
#define portNO_CRITICAL_NESTING    ( ( uint32_t ) 0 )
volatile uint32_t ulCriticalNesting = 9999UL;

/*-----------------------------------------------------------*/

/* ISR to handle manual context switches (from a call to taskYIELD()). */
void vPortYieldProcessor( void ) __attribute__( ( interrupt( "SWI" ), naked ) );

/*
 * The scheduler can only be started from ARM mode, hence the inclusion of this
 * function here.
 */
void vPortISRStartFirstTask( void );
/*-----------------------------------------------------------*/

void vPortISRStartFirstTask( void )
{
    /* Simply start the scheduler.  This is included here as it can only be
     * called from ARM mode. */
    portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/

/*
 * Called by portYIELD() or taskYIELD() to manually force a context switch.
 *
 * When a context switch is performed from the task level the saved task
 * context is made to look as if it occurred from within the tick ISR.  This
 * way the same restore context function can be used when restoring the context
 * saved from the ISR or that saved from a call to vPortYieldProcessor.
 */
void vPortYieldProcessor( void )
{
    /* Within an IRQ ISR the link register has an offset from the true return
     * address, but an SWI ISR does not.  Add the offset manually so the same
     * ISR return code can be used in both cases. */
    __asm volatile ( "ADD		LR, LR, #4");

    /* Perform the context switch.  First save the context of the current task. */
    portSAVE_CONTEXT();

    /* Find the highest priority task that is ready to run. */
    __asm volatile ( "bl			vTaskSwitchContext");

    /* Restore the context of the new task. */
    portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/

/*
 * The ISR used for the scheduler tick depends on whether the cooperative or
 * the preemptive scheduler is being used.
 */


#if configUSE_PREEMPTION == 0

/* The cooperative scheduler requires a normal IRQ service routine to
 * simply increment the system tick. */
    void vNonPreemptiveTick( void ) __attribute__( ( interrupt( "IRQ" ) ) );
    void vNonPreemptiveTick( void )
    {
        xTaskIncrementTick();
        T0IR = 2;
        VICVectAddr = portCLEAR_VIC_INTERRUPT;
    }

#else /* if configUSE_PREEMPTION == 0 */

/* The preemptive scheduler is defined as "naked" as the full context is
 * saved on entry as part of the context switch. */
    void vPreemptiveTick( void ) __attribute__( ( naked ) );
    void vPreemptiveTick( void )
    {
        /* Save the context of the interrupted task. */
        portSAVE_CONTEXT();

        /* Increment the RTOS tick count, then look for the highest priority
         * task that is ready to run. */
        __asm volatile
        (
            "	bl xTaskIncrementTick	\t\n"\
            "	cmp r0, #0				\t\n"\
            "	beq SkipContextSwitch	\t\n"\
            "	bl vTaskSwitchContext	\t\n"\
            "SkipContextSwitch:			\t\n"
        );

        /* Ready for the next interrupt. */
        T0IR = 2;
        VICVectAddr = portCLEAR_VIC_INTERRUPT;

        /* Restore the context of the new task. */
        portRESTORE_CONTEXT();
    }

#endif /* if configUSE_PREEMPTION == 0 */
/*-----------------------------------------------------------*/

/*
 * The interrupt management utilities can only be called from ARM mode.  When
 * THUMB_INTERWORK is defined the utilities are defined as functions here to
 * ensure a switch to ARM mode.  When THUMB_INTERWORK is not defined then
 * the utilities are defined as macros in portmacro.h - as per other ports.
 */
#ifdef THUMB_INTERWORK

    void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
    void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );

    void vPortDisableInterruptsFromThumb( void )
    {
        __asm volatile (
            "STMDB	SP!, {R0}		\n\t"/* Push R0.									*/
            "MRS	R0, CPSR		\n\t"/* Get CPSR.								*/
            "ORR	R0, R0, #0xC0	\n\t"/* Disable IRQ, FIQ.						*/
            "MSR	CPSR, R0		\n\t"/* Write back modified value.				*/
            "LDMIA	SP!, {R0}		\n\t"/* Pop R0.									*/
            "BX		R14");                  /* Return back to thumb.					*/
    }

    void vPortEnableInterruptsFromThumb( void )
    {
        __asm volatile (
            "STMDB	SP!, {R0}		\n\t"/* Push R0.									*/
            "MRS	R0, CPSR		\n\t"/* Get CPSR.								*/
            "BIC	R0, R0, #0xC0	\n\t"/* Enable IRQ, FIQ.							*/
            "MSR	CPSR, R0		\n\t"/* Write back modified value.				*/
            "LDMIA	SP!, {R0}		\n\t"/* Pop R0.									*/
            "BX		R14");                  /* Return back to thumb.					*/
    }

#endif /* THUMB_INTERWORK */

/* The code generated by the GCC compiler uses the stack in different ways at
 * different optimisation levels.  The interrupt flags can therefore not always
 * be saved to the stack.  Instead the critical section nesting level is stored
 * in a variable, which is then saved as part of the stack context. */
void vPortEnterCritical( void )
{
    /* Disable interrupts as per portDISABLE_INTERRUPTS();                          */
    __asm volatile (
        "STMDB	SP!, {R0}			\n\t"/* Push R0.								*/
        "MRS	R0, CPSR			\n\t"/* Get CPSR.							*/
        "ORR	R0, R0, #0xC0		\n\t"/* Disable IRQ, FIQ.					*/
        "MSR	CPSR, R0			\n\t"/* Write back modified value.			*/
        "LDMIA	SP!, {R0}");      /* Pop R0.								*/

    /* Now interrupts are disabled ulCriticalNesting can be accessed
     * directly.  Increment ulCriticalNesting to keep a count of how many times
     * portENTER_CRITICAL() has been called. */
    ulCriticalNesting++;
}

void vPortExitCritical( void )
{
    if( ulCriticalNesting > portNO_CRITICAL_NESTING )
    {
        /* Decrement the nesting count as we are leaving a critical section. */
        ulCriticalNesting--;

        /* If the nesting level has reached zero then interrupts should be
         * re-enabled. */
        if( ulCriticalNesting == portNO_CRITICAL_NESTING )
        {
            /* Enable interrupts as per portEXIT_CRITICAL().					*/
            __asm volatile (
                "STMDB	SP!, {R0}		\n\t"/* Push R0.						*/
                "MRS	R0, CPSR		\n\t"/* Get CPSR.					*/
                "BIC	R0, R0, #0xC0	\n\t"/* Enable IRQ, FIQ.				*/
                "MSR	CPSR, R0		\n\t"/* Write back modified value.	*/
                "LDMIA	SP!, {R0}");     /* Pop R0.						*/
        }
    }
}