/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

/*
 *  Changes from V2.5.2
 *
 + usCriticalNesting now has a volatile qualifier.
 */

/* Standard includes. */
#include <stdlib.h>
#include <signal.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the MSP430 port.
*----------------------------------------------------------*/

/* Constants required for hardware setup.  The tick ISR runs off the ACLK,
 * not the MCLK. */
#define portACLK_FREQUENCY_HZ           ( ( TickType_t ) 32768 )
#define portINITIAL_CRITICAL_NESTING    ( ( uint16_t ) 10 )
#define portFLAGS_INT_ENABLED           ( ( StackType_t ) 0x08 )

/* We require the address of the pxCurrentTCB variable, but don't want to know
 * any details of its type. */
typedef void TCB_t;
extern volatile TCB_t * volatile pxCurrentTCB;

/* Most ports implement critical sections by placing the interrupt flags on
 * the stack before disabling interrupts.  Exiting the critical section is then
 * simply a case of popping the flags from the stack.  As mspgcc does not use
 * a frame pointer this cannot be done as modifying the stack will clobber all
 * the stack variables.  Instead each task maintains a count of the critical
 * section nesting depth.  Each time a critical section is entered the count is
 * incremented.  Each time a critical section is left the count is decremented -
 * with interrupts only being re-enabled if the count is zero.
 *
 * usCriticalNesting will get set to zero when the scheduler starts, but must
 * not be initialised to zero as this will cause problems during the startup
 * sequence. */
volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING;
/*-----------------------------------------------------------*/

/*
 * Macro to save a task context to the task stack.  This simply pushes all the
 * general purpose msp430 registers onto the stack, followed by the
 * usCriticalNesting value used by the task.  Finally the resultant stack
 * pointer value is saved into the task control block so it can be retrieved
 * the next time the task executes.
 */
#define portSAVE_CONTEXT()                             \
    asm volatile ( "push	r4						\n\t"\
                   "push	r5						\n\t"\
                   "push	r6						\n\t"\
                   "push	r7						\n\t"\
                   "push	r8						\n\t"\
                   "push	r9						\n\t"\
                   "push	r10						\n\t"\
                   "push	r11						\n\t"\
                   "push	r12						\n\t"\
                   "push	r13						\n\t"\
                   "push	r14						\n\t"\
                   "push	r15						\n\t"\
                   "mov.w	usCriticalNesting, r14	\n\t"\
                   "push	r14						\n\t"\
                   "mov.w	pxCurrentTCB, r12		\n\t"\
                   "mov.w	r1, @r12				\n\t"\
                   );

/*
 * Macro to restore a task context from the task stack.  This is effectively
 * the reverse of portSAVE_CONTEXT().  First the stack pointer value is
 * loaded from the task control block.  Next the value for usCriticalNesting
 * used by the task is retrieved from the stack - followed by the value of all
 * the general purpose msp430 registers.
 *
 * The bic instruction ensures there are no low power bits set in the status
 * register that is about to be popped from the stack.
 */
#define portRESTORE_CONTEXT()                          \
    asm volatile ( "mov.w	pxCurrentTCB, r12		\n\t"\
                   "mov.w	@r12, r1				\n\t"\
                   "pop	r15						\n\t"  \
                   "mov.w	r15, usCriticalNesting	\n\t"\
                   "pop	r15						\n\t"  \
                   "pop	r14						\n\t"  \
                   "pop	r13						\n\t"  \
                   "pop	r12						\n\t"  \
                   "pop	r11						\n\t"  \
                   "pop	r10						\n\t"  \
                   "pop	r9						\n\t"  \
                   "pop	r8						\n\t"  \
                   "pop	r7						\n\t"  \
                   "pop	r6						\n\t"  \
                   "pop	r5						\n\t"  \
                   "pop	r4						\n\t"  \
                   "bic	#(0xf0),0(r1)			\n\t"  \
                   "reti							\n\t"\
                   );
/*-----------------------------------------------------------*/

/*
 * Sets up the periodic ISR used for the RTOS tick.  This uses timer 0, but
 * could have alternatively used the watchdog timer or timer 1.
 */
static void prvSetupTimerInterrupt( void );
/*-----------------------------------------------------------*/

/*
 * Initialise the stack of a task to look exactly as if a call to
 * portSAVE_CONTEXT had been called.
 *
 * See the header file portable.h.
 */
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
                                     TaskFunction_t pxCode,
                                     void * pvParameters )
{
    /*
     *  Place a few bytes of known values on the bottom of the stack.
     *  This is just useful for debugging and can be included if required.
     *
     * pxTopOfStack = ( StackType_t ) 0x1111;
     *  pxTopOfStack--;
     * pxTopOfStack = ( StackType_t ) 0x2222;
     *  pxTopOfStack--;
     * pxTopOfStack = ( StackType_t ) 0x3333;
     *  pxTopOfStack--;
     */

    /* The msp430 automatically pushes the PC then SR onto the stack before
     * executing an ISR.  We want the stack to look just as if this has happened
     * so place a pointer to the start of the task on the stack first - followed
     * by the flags we want the task to use when it starts up. */
    *pxTopOfStack = ( StackType_t ) pxCode;
    pxTopOfStack--;
    *pxTopOfStack = portFLAGS_INT_ENABLED;
    pxTopOfStack--;

    /* Next the general purpose registers. */
    *pxTopOfStack = ( StackType_t ) 0x4444;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x5555;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x6666;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x7777;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x8888;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x9999;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xaaaa;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xbbbb;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xcccc;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xdddd;
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xeeee;
    pxTopOfStack--;

    /* When the task starts is will expect to find the function parameter in
     * R15. */
    *pxTopOfStack = ( StackType_t ) pvParameters;
    pxTopOfStack--;

    /* The code generated by the mspgcc compiler does not maintain separate
     * stack and frame pointers. The portENTER_CRITICAL macro cannot therefore
     * use the stack as per other ports.  Instead a variable is used to keep
     * track of the critical section nesting.  This variable has to be stored
     * as part of the task context and is initially set to zero. */
    *pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING;

    /* Return a pointer to the top of the stack we have generated so this can
     * be stored in the task control block for the task. */
    return pxTopOfStack;
}
/*-----------------------------------------------------------*/

BaseType_t xPortStartScheduler( void )
{
    /* Setup the hardware to generate the tick.  Interrupts are disabled when
     * this function is called. */
    prvSetupTimerInterrupt();

    /* Restore the context of the first task that is going to run. */
    portRESTORE_CONTEXT();

    /* Should not get here as the tasks are now running! */
    return pdTRUE;
}
/*-----------------------------------------------------------*/

void vPortEndScheduler( void )
{
    /* It is unlikely that the MSP430 port will get stopped.  If required simply
     * disable the tick interrupt here. */
}
/*-----------------------------------------------------------*/

/*
 * Manual context switch called by portYIELD or taskYIELD.
 *
 * The first thing we do is save the registers so we can use a naked attribute.
 */
void vPortYield( void ) __attribute__( ( naked ) );
void vPortYield( void )
{
    /* We want the stack of the task being saved to look exactly as if the task
     * was saved during a pre-emptive RTOS tick ISR.  Before calling an ISR the
     * msp430 places the status register onto the stack.  As this is a function
     * call and not an ISR we have to do this manually. */
    asm volatile ( "push	r2");
    _DINT();

    /* Save the context of the current task. */
    portSAVE_CONTEXT();

    /* Switch to the highest priority task that is ready to run. */
    vTaskSwitchContext();

    /* Restore the context of the new task. */
    portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/

/*
 * Hardware initialisation to generate the RTOS tick.  This uses timer 0
 * but could alternatively use the watchdog timer or timer 1.
 */
static void prvSetupTimerInterrupt( void )
{
    /* Ensure the timer is stopped. */
    TACTL = 0;

    /* Run the timer of the ACLK. */
    TACTL = TASSEL_1;

    /* Clear everything to start with. */
    TACTL |= TACLR;

    /* Set the compare match value according to the tick rate we want. */
    TACCR0 = portACLK_FREQUENCY_HZ / configTICK_RATE_HZ;

    /* Enable the interrupts. */
    TACCTL0 = CCIE;

    /* Start up clean. */
    TACTL |= TACLR;

    /* Up mode. */
    TACTL |= MC_1;
}
/*-----------------------------------------------------------*/

/*
 * The interrupt service routine used depends on whether the pre-emptive
 * scheduler is being used or not.
 */

#if configUSE_PREEMPTION == 1

/*
 * Tick ISR for preemptive scheduler.  We can use a naked attribute as
 * the context is saved at the start of vPortYieldFromTick().  The tick
 * count is incremented after the context is saved.
 */
    interrupt( TIMERA0_VECTOR ) prvTickISR( void ) __attribute__( ( naked ) );
    interrupt( TIMERA0_VECTOR ) prvTickISR( void )
    {
        /* Save the context of the interrupted task. */
        portSAVE_CONTEXT();

        /* Increment the tick count then switch to the highest priority task
         * that is ready to run. */
        if( xTaskIncrementTick() != pdFALSE )
        {
            vTaskSwitchContext();
        }

        /* Restore the context of the new task. */
        portRESTORE_CONTEXT();
    }

#else /* if configUSE_PREEMPTION == 1 */

/*
 * Tick ISR for the cooperative scheduler.  All this does is increment the
 * tick count.  We don't need to switch context, this can only be done by
 * manual calls to taskYIELD();
 */
    interrupt( TIMERA0_VECTOR ) prvTickISR( void );
    interrupt( TIMERA0_VECTOR ) prvTickISR( void )
    {
        xTaskIncrementTick();
    }
#endif /* if configUSE_PREEMPTION == 1 */