/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */


/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the Tern EE 186
* port.
*----------------------------------------------------------*/

/* Library includes. */
#include <embedded.h>
#include <ae.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "portasm.h"

/* The timer increments every four clocks, hence the divide by 4. */
#define portPRESCALE_VALUE                ( 16 )
#define portTIMER_COMPARE                 ( configCPU_CLOCK_HZ / ( configTICK_RATE_HZ * 4UL ) )

/* From the RDC data sheet. */
#define portENABLE_TIMER_AND_INTERRUPT    ( uint16_t ) 0xe00b
#define portENABLE_TIMER                  ( uint16_t ) 0xC001

/* Interrupt control. */
#define portEIO_REGISTER                  0xff22
#define portCLEAR_INTERRUPT               0x0008

/* Setup the hardware to generate the required tick frequency. */
static void prvSetupTimerInterrupt( void );

/* The ISR used depends on whether the preemptive or cooperative scheduler
 * is being used. */
#if ( configUSE_PREEMPTION == 1 )

/* Tick service routine used by the scheduler when preemptive scheduling is
 * being used. */
    static void __interrupt __far prvPreemptiveTick( void );
#else

/* Tick service routine used by the scheduler when cooperative scheduling is
 * being used. */
    static void __interrupt __far prvNonPreemptiveTick( void );
#endif

/* Trap routine used by taskYIELD() to manually cause a context switch. */
static void __interrupt __far prvYieldProcessor( void );

/*-----------------------------------------------------------*/
/* See header file for description. */
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
                                     TaskFunction_t pxCode,
                                     void * pvParameters )
{
    StackType_t DS_Reg = 0;

    /* We need the true data segment. */
    __asm {
        MOV DS_Reg, DS
    };

    /* Place a few bytes of known values on the bottom of the stack.
     * This is just useful for debugging. */

    *pxTopOfStack = 0x1111;
    pxTopOfStack--;
    *pxTopOfStack = 0x2222;
    pxTopOfStack--;
    *pxTopOfStack = 0x3333;
    pxTopOfStack--;

    /* We are going to start the scheduler using a return from interrupt
     * instruction to load the program counter, so first there would be the
     * function call with parameters preamble. */

    *pxTopOfStack = FP_OFF( pvParameters );
    pxTopOfStack--;
    *pxTopOfStack = FP_OFF( pxCode );
    pxTopOfStack--;

    /* Next the status register and interrupt return address. */
    *pxTopOfStack = portINITIAL_SW;
    pxTopOfStack--;
    *pxTopOfStack = FP_SEG( pxCode );
    pxTopOfStack--;
    *pxTopOfStack = FP_OFF( pxCode );
    pxTopOfStack--;

    /* The remaining registers would be pushed on the stack by our context
     * switch function.  These are loaded with values simply to make debugging
     * easier. */
    *pxTopOfStack = ( StackType_t ) 0xAAAA; /* AX */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xBBBB; /* BX */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xCCCC; /* CX */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xDDDD; /* DX */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xEEEE; /* ES */
    pxTopOfStack--;

    *pxTopOfStack = DS_Reg;                 /* DS */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x0123; /* SI */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xDDDD; /* DI */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0xBBBB; /* BP */

    return pxTopOfStack;
}
/*-----------------------------------------------------------*/

BaseType_t xPortStartScheduler( void )
{
    /* This is called with interrupts already disabled. */

    /* Put our manual switch (yield) function on a known
     * vector. */
    setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );

    /* Setup the tick interrupt. */
    prvSetupTimerInterrupt();

    /* Kick off the scheduler by setting up the context of the first task. */
    portFIRST_CONTEXT();

    /* Should not get here! */
    return pdFALSE;
}
/*-----------------------------------------------------------*/

/* The ISR used depends on whether the preemptive or cooperative scheduler
 * is being used. */
#if ( configUSE_PREEMPTION == 1 )
    static void __interrupt __far prvPreemptiveTick( void )
    {
        /* Get the scheduler to update the task states following the tick. */
        if( xTaskIncrementTick() != pdFALSE )
        {
            /* Switch in the context of the next task to be run. */
            portEND_SWITCHING_ISR();
        }

        /* Reset interrupt. */
        outport( portEIO_REGISTER, portCLEAR_INTERRUPT );
    }
#else /* if ( configUSE_PREEMPTION == 1 ) */
    static void __interrupt __far prvNonPreemptiveTick( void )
    {
        /* Same as preemptive tick, but the cooperative scheduler is being used
         * so we don't have to switch in the context of the next task. */
        xTaskIncrementTick();

        /* Reset interrupt. */
        outport( portEIO_REGISTER, portCLEAR_INTERRUPT );
    }
#endif /* if ( configUSE_PREEMPTION == 1 ) */
/*-----------------------------------------------------------*/

static void __interrupt __far prvYieldProcessor( void )
{
    /* Switch in the context of the next task to be run. */
    portEND_SWITCHING_ISR();
}
/*-----------------------------------------------------------*/

void vPortEndScheduler( void )
{
    /* Not implemented. */
}
/*-----------------------------------------------------------*/

static void prvSetupTimerInterrupt( void )
{
    const uint32_t ulCompareValue = portTIMER_COMPARE;
    uint16_t usTimerCompare;

    usTimerCompare = ( uint16_t ) ( ulCompareValue >> 4 );
    t2_init( portENABLE_TIMER, portPRESCALE_VALUE, NULL );

    #if ( configUSE_PREEMPTION == 1 )

        /* Tick service routine used by the scheduler when preemptive scheduling is
         * being used. */
        t1_init( portENABLE_TIMER_AND_INTERRUPT, usTimerCompare, usTimerCompare, prvPreemptiveTick );
    #else

        /* Tick service routine used by the scheduler when cooperative scheduling is
         * being used. */
        t1_init( portENABLE_TIMER_AND_INTERRUPT, usTimerCompare, usTimerCompare, prvNonPreemptiveTick );
    #endif
}