blob: 1e13a249a516d6086864062dc90c1759bb488f52 [file] [log] [blame]
/*
* FreeRTOS Kernel V10.1.0
* Copyright (C) 2018 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*
* This file contains the non-portable and therefore RX62N specific parts of
* the IntQueue standard demo task - namely the configuration of the timers
* that generate the interrupts and the interrupt entry points.
*/
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
/* Demo includes. */
#include "IntQueueTimer.h"
#include "IntQueue.h"
/* Hardware specifics. */
#include "iodefine.h"
#define tmrTIMER_0_1_FREQUENCY ( 2000UL )
#define tmrTIMER_2_3_FREQUENCY ( 2001UL )
void vInitialiseTimerForIntQueueTest( void )
{
/* Ensure interrupts do not start until full configuration is complete. */
portENTER_CRITICAL();
{
/* Cascade two 8bit timer channels to generate the interrupts.
8bit timer unit 1 (TMR0 and TMR1) and 8bit timer unit 2 (TMR2 and TMR3 are
utilised for this test. */
/* Enable the timers. */
SYSTEM.MSTPCRA.BIT.MSTPA5 = 0;
SYSTEM.MSTPCRA.BIT.MSTPA4 = 0;
/* Enable compare match A interrupt request. */
TMR0.TCR.BIT.CMIEA = 1;
TMR2.TCR.BIT.CMIEA = 1;
/* Clear the timer on compare match A. */
TMR0.TCR.BIT.CCLR = 1;
TMR2.TCR.BIT.CCLR = 1;
/* Set the compare match value. */
TMR01.TCORA = ( unsigned short ) ( ( ( configPERIPHERAL_CLOCK_HZ / tmrTIMER_0_1_FREQUENCY ) -1 ) / 8 );
TMR23.TCORA = ( unsigned short ) ( ( ( configPERIPHERAL_CLOCK_HZ / tmrTIMER_0_1_FREQUENCY ) -1 ) / 8 );
/* 16 bit operation ( count from timer 1,2 ). */
TMR0.TCCR.BIT.CSS = 3;
TMR2.TCCR.BIT.CSS = 3;
/* Use PCLK as the input. */
TMR1.TCCR.BIT.CSS = 1;
TMR3.TCCR.BIT.CSS = 1;
/* Divide PCLK by 8. */
TMR1.TCCR.BIT.CKS = 2;
TMR3.TCCR.BIT.CKS = 2;
/* Enable TMR 0, 2 interrupts. */
IEN( TMR0, CMIA0 ) = 1;
IEN( TMR2, CMIA2 ) = 1;
/* Set the timer interrupts to be above the kernel. The interrupts are
assigned different priorities so they nest with each other. */
IPR( TMR0, CMIA0 ) = configMAX_SYSCALL_INTERRUPT_PRIORITY - 1;
IPR( TMR2, CMIA2 ) = ( configMAX_SYSCALL_INTERRUPT_PRIORITY - 2 );
}
portEXIT_CRITICAL();
/* Ensure the interrupts are clear as they are edge detected. */
IR( TMR0, CMIA0 ) = 0;
IR( TMR2, CMIA2 ) = 0;
}
/*-----------------------------------------------------------*/
#pragma interrupt ( vT0_1InterruptHandler( vect = VECT_TMR0_CMIA0, enable ) )
void vT0_1InterruptHandler( void )
{
portYIELD_FROM_ISR( xFirstTimerHandler() );
}
/*-----------------------------------------------------------*/
#pragma interrupt ( vT2_3InterruptHandler( vect = VECT_TMR2_CMIA2, enable ) )
void vT2_3InterruptHandler( void )
{
portYIELD_FROM_ISR( xSecondTimerHandler() );
}