| /* | |
| * FreeRTOS Kernel V10.2.0 | |
| * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a copy of | |
| * this software and associated documentation files (the "Software"), to deal in | |
| * the Software without restriction, including without limitation the rights to | |
| * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of | |
| * the Software, and to permit persons to whom the Software is furnished to do so, | |
| * subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in all | |
| * copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS | |
| * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR | |
| * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * http://www.FreeRTOS.org | |
| * http://aws.amazon.com/freertos | |
| * | |
| * 1 tab == 4 spaces! | |
| */ | |
| #ifndef FREERTOS_CONFIG_H | |
| #define FREERTOS_CONFIG_H | |
| /*----------------------------------------------------------- | |
| * Application specific definitions. | |
| * | |
| * These definitions should be adjusted for your particular hardware and | |
| * application requirements. | |
| * | |
| * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE | |
| * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. | |
| * | |
| * See http://www.freertos.org/a00110.html | |
| *----------------------------------------------------------*/ | |
| /* configINTERRUPT_CONTROLLER_TO_USE must be set to the ID of the interrupt | |
| controller that is going to be used directly by FreeRTOS itself. Most hardware | |
| designs will only include on interrupt controller. */ | |
| #define configINTERRUPT_CONTROLLER_TO_USE XPAR_INTC_SINGLE_DEVICE_ID | |
| /* If configINSTALL_EXCEPTION_HANDLERS is set to 1, then the kernel will | |
| automatically install its own exception handlers before the kernel is started, | |
| if the application writer has not already caused them to be installed using the | |
| vPortExceptionsInstallHandlers() API function. See the documentation page for | |
| this demo on the FreeRTOS.org web site for more information. */ | |
| #define configINSTALL_EXCEPTION_HANDLERS 1 | |
| /* Constants related to the behaviour or the scheduler. */ | |
| #define configUSE_PREEMPTION 1 | |
| #define configUSE_TIME_SLICING 1 | |
| #define configMAX_PRIORITIES ( 7 ) | |
| #define configTICK_RATE_HZ ( ( TickType_t ) 1000 ) | |
| #define configIDLE_SHOULD_YIELD 1 | |
| #define configUSE_16_BIT_TICKS 0 /* Only for 8 and 16-bit hardware. */ | |
| #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 | |
| /* Constants that describe the hardware and memory usage. */ | |
| #define configCPU_CLOCK_HZ ( Not used in this demo as it is determined by the hardware ) | |
| #define configMINIMAL_STACK_SIZE ( ( uint16_t ) 170 ) | |
| #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 80 * 1024 ) ) /* No effect if heap_3.c is used. */ | |
| #define configMAX_TASK_NAME_LEN ( 10 ) | |
| /* Constants that build features in or out. */ | |
| #define configUSE_MUTEXES 1 | |
| #define configUSE_TICKLESS_IDLE 0 | |
| #define configUSE_APPLICATION_TASK_TAG 0 | |
| #define configUSE_NEWLIB_REENTRANT 0 | |
| #define configUSE_CO_ROUTINES 0 | |
| #define configUSE_COUNTING_SEMAPHORES 1 | |
| #define configUSE_RECURSIVE_MUTEXES 1 | |
| #define configUSE_QUEUE_SETS 0 | |
| #define configUSE_TASK_NOTIFICATIONS 1 | |
| /* Constants that define which hook (callback) functions should be used. */ | |
| #define configUSE_IDLE_HOOK 1 | |
| #define configUSE_TICK_HOOK 1 | |
| #define configUSE_MALLOC_FAILED_HOOK 1 | |
| /* Constants provided for debugging and optimisation assistance. */ | |
| #define configCHECK_FOR_STACK_OVERFLOW 2 | |
| #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ) | |
| #define configQUEUE_REGISTRY_SIZE 0 | |
| /* Constants related to the generation of run time stats. */ | |
| #define configGENERATE_RUN_TIME_STATS 1 | |
| #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() /* Only used when configGENERATE_RUN_TIME_STATS is 1. In this case the timer is setup when the tick timer is set up. */ | |
| #define portGET_RUN_TIME_COUNTER_VALUE() ulMainGetRunTimeCounterValue() /* Only used when configGENERATE_RUN_TIME_STATS is 1. */ | |
| /* Software timer definitions. */ | |
| #define configUSE_TIMERS 1 | |
| #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 4 ) | |
| #define configTIMER_QUEUE_LENGTH 10 | |
| #define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE ) | |
| /* Set the following definitions to 1 to include the API function, or zero | |
| to exclude the API function. NOTE: Setting an INCLUDE_ parameter to 0 is only | |
| necessary if the linker does not automatically remove functions that are not | |
| referenced anyway. */ | |
| #define INCLUDE_vTaskPrioritySet 1 | |
| #define INCLUDE_uxTaskPriorityGet 1 | |
| #define INCLUDE_vTaskDelete 1 | |
| #define INCLUDE_vTaskSuspend 1 | |
| #define INCLUDE_vTaskDelayUntil 1 | |
| #define INCLUDE_vTaskDelay 1 | |
| #define INCLUDE_uxTaskGetStackHighWaterMark 1 | |
| #define INCLUDE_xTaskGetIdleTaskHandle 0 | |
| #define INCLUDE_eTaskGetState 1 | |
| #define INCLUDE_xTaskResumeFromISR 0 | |
| #define INCLUDE_xTaskGetCurrentTaskHandle 1 | |
| #define INCLUDE_xTaskGetSchedulerState 0 | |
| #define INCLUDE_xSemaphoreGetMutexHolder 0 | |
| #define INCLUDE_xTimerPendFunctionCall 1 | |
| #define INCLUDE_xTaskAbortDelay 1 | |
| #define INCLUDE_xTaskGetHandle 1 | |
| /* This demo does not make use of example stats formatting functions. These | |
| format the raw data provided by the uxTaskGetSystemState() function in to human | |
| readable ASCII form. See the notes in the implementation of vTaskList() within | |
| FreeRTOS/Source/tasks.c for limitations. */ | |
| #define configUSE_TRACE_FACILITY 1 | |
| #define configUSE_STATS_FORMATTING_FUNCTIONS 1 | |
| /* The size of the global output buffer that is available for use when there | |
| are multiple command interpreters running at once (for example, one on a UART | |
| and one on TCP/IP). This is done to prevent an output buffer being defined by | |
| each implementation - which would waste RAM. In this case, there is only one | |
| command interpreter running. */ | |
| #define configCOMMAND_INT_MAX_OUTPUT_SIZE 2048 | |
| /* Prevent the function prototypes being included from asm files. */ | |
| #ifndef __ASSEMBLER__ | |
| uint32_t ulMainGetRunTimeCounterValue( void ); | |
| void vAssertCalled( const char * pcFile, unsigned long ulLine ); | |
| #endif | |
| /****** Network configuration settings - only used when the lwIP example is | |
| built. See the page that documents this demo on the http://www.FreeRTOS.org | |
| website for more information. ***********************************************/ | |
| /* The priority for the task that unblocked by the MAC interrupt to process | |
| received packets. */ | |
| #define configMAC_INPUT_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) | |
| /* The priority of the task that runs the lwIP stack. */ | |
| #define configLWIP_TASK_PRIORITY ( configMAX_PRIORITIES - 2 ) | |
| /* The priority of the task that uses lwIP sockets to provide a simple command | |
| line interface. */ | |
| #define configCLI_TASK_PRIORITY ( tskIDLE_PRIORITY ) | |
| /* MAC address configuration. */ | |
| #define configMAC_ADDR0 0x00 | |
| #define configMAC_ADDR1 0x13 | |
| #define configMAC_ADDR2 0x14 | |
| #define configMAC_ADDR3 0x15 | |
| #define configMAC_ADDR4 0x15 | |
| #define configMAC_ADDR5 0x16 | |
| /* IP address configuration. */ | |
| #define configIP_ADDR0 10 | |
| #define configIP_ADDR1 134 | |
| #define configIP_ADDR2 134 | |
| #define configIP_ADDR3 200 | |
| /* Netmask configuration. */ | |
| #define configNET_MASK0 255 | |
| #define configNET_MASK1 255 | |
| #define configNET_MASK2 255 | |
| #define configNET_MASK3 0 | |
| #endif /* FREERTOS_CONFIG_H */ | |