FreeRTOS/Demo/RX700_RX71M_RSK_GCC_e2studio_IAR/src/Full_Demo/RegTest_GCC.S - third_party/github/FreeRTOS/FreeRTOS-Kernel - Git at Google

 ;/*
 ; * FreeRTOS Kernel V10.2.0
 ; * Copyright (C) 2019 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 ; *
 ; * Permission is hereby granted, free of charge, to any person obtaining a copy of
 ; * this software and associated documentation files (the "Software"), to deal in
 ; * the Software without restriction, including without limitation the rights to
 ; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 ; * the Software, and to permit persons to whom the Software is furnished to do so,
 ; * subject to the following conditions:
 ; *
 ; * The above copyright notice and this permission notice shall be included in all
 ; * copies or substantial portions of the Software.
 ; *
 ; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 ; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 ; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 ; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 ; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 ; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 ; *
 ; * http://www.FreeRTOS.org
 ; * http://aws.amazon.com/freertos
 ; *
 ; * 1 tab == 4 spaces!
 ; */

 	.global _vRegTest1Implementation
 	.global _vRegTest2Implementation

 	.extern _ulRegTest1LoopCounter
 	.extern _ulRegTest2LoopCounter

 	.text


 ;/* This function is explained in the comments at the top of main.c. */
 _vRegTest1Implementation:

 	;/* Put a known value in the guard byte of the accumulators. */
 	MOV.L	#10, R1
 	MVTACGU R1, A0
 	MOV.L	#20, R1
 	MVTACGU R1, A1

 	;/* Put a known value in each register. */
 	MOV.L	#1, R1
 	MOV.L	#2, R2
 	MOV.L	#3, R3
 	MOV.L	#4, R4
 	MOV.L	#5, R5
 	MOV.L	#6, R6
 	MOV.L	#7, R7
 	MOV.L	#8, R8
 	MOV.L	#9, R9
 	MOV.L	#10, R10
 	MOV.L	#11, R11
 	MOV.L	#12, R12
 	MOV.L	#13, R13
 	MOV.L	#14, R14
 	MOV.L	#15, R15

 	;/* Put a known value in the hi and low of the accumulators. */
 	MVTACHI R1, A0
 	MVTACLO R2, A0
 	MVTACHI R3, A1
 	MVTACLO R4, A1

 	;/* Loop, checking each iteration that each register still contains the
 	;expected value. */
 TestLoop1:

 	;/* Push the registers that are going to get clobbered. */
 	PUSHM	R14-R15

 	;/* Increment the loop counter to show this task is still getting CPU time. */
 	MOV.L	#_ulRegTest1LoopCounter, R14
 	MOV.L	[ R14 ], R15
 	ADD	#1, R15
 	MOV.L	R15, [ R14 ]

 	;/* Yield to extend the text coverage.  Set the bit in the ITU SWINTR register. */
 	MOV.L	#1, R14
 	MOV.L 	#0872E0H, R15
 	MOV.B	R14, [R15]
 	NOP
 	NOP

 	;/* Check accumulators. */
 	MVFACHI	#0, A0, R15
 	CMP #1, R15
 	BNE RegTest1Error
 	MVFACLO	#0, A0, R15
 	CMP #2, R15
 	BNE RegTest1Error
 	MVFACGU	#0, A0, R15
 	CMP #10, R15
 	BNE RegTest1Error
 	MVFACHI	#0, A1, R15
 	CMP #3, R15
 	BNE RegTest1Error
 	MVFACLO	#0, A1, R15
 	CMP #4, R15
 	BNE RegTest1Error
 	MVFACGU	#0, A1, R15
 	CMP #20, R15
 	BNE RegTest1Error

 	;/* Restore the clobbered registers. */
 	POPM	R14-R15

 	;/* Now compare each register to ensure it still contains the value that was
 	;set before this loop was entered. */
 	CMP	#1, R1
 	BNE	RegTest1Error
 	CMP	#2, R2
 	BNE	RegTest1Error
 	CMP	#3, R3
 	BNE	RegTest1Error
 	CMP	#4, R4
 	BNE	RegTest1Error
 	CMP	#5, R5
 	BNE	RegTest1Error
 	CMP	#6, R6
 	BNE	RegTest1Error
 	CMP	#7, R7
 	BNE	RegTest1Error
 	CMP	#8, R8
 	BNE	RegTest1Error
 	CMP	#9, R9
 	BNE	RegTest1Error
 	CMP	#10, R10
 	BNE	RegTest1Error
 	CMP	#11, R11
 	BNE	RegTest1Error
 	CMP	#12, R12
 	BNE	RegTest1Error
 	CMP	#13, R13
 	BNE	RegTest1Error
 	CMP	#14, R14
 	BNE	RegTest1Error
 	CMP	#15, R15
 	BNE	RegTest1Error

 	;/* All comparisons passed, start a new itteratio of this loop. */
 	BRA		TestLoop1

 RegTest1Error:
 	;/* A compare failed, just loop here so the loop counter stops incrementing
 	;- causing the check task to indicate the error. */
 	BRA RegTest1Error
 ;/*-----------------------------------------------------------*/

 ;/* This function is explained in the comments at the top of main.c. */
 _vRegTest2Implementation:

 	;/* Put a known value in the guard byte of the accumulators. */
 	MOV.L	#1H, R1
 	MVTACGU R1, A0
 	MOV.L	#2H, R1
 	MVTACGU R1, A1

 	;/* Put a known value in each general purpose register. */
 	MOV.L	#10H, R1
 	MOV.L	#20H, R2
 	MOV.L	#30H, R3
 	MOV.L	#40H, R4
 	MOV.L	#50H, R5
 	MOV.L	#60H, R6
 	MOV.L	#70H, R7
 	MOV.L	#80H, R8
 	MOV.L	#90H, R9
 	MOV.L	#100H, R10
 	MOV.L	#110H, R11
 	MOV.L	#120H, R12
 	MOV.L	#130H, R13
 	MOV.L	#140H, R14
 	MOV.L	#150H, R15

 	;/* Put a known value in the hi and low of the accumulators. */
 	MVTACHI R1, A0
 	MVTACLO R2, A0
 	MVTACHI R3, A1
 	MVTACLO R4, A1

 	;/* Loop, checking each iteration that each register still contains the
 	;expected value. */
 TestLoop2:

 	;/* Push the registers that are going to get clobbered. */
 	PUSHM	R14-R15

 	;/* Increment the loop counter to show this task is still getting CPU time. */
 	MOV.L	#_ulRegTest2LoopCounter, R14
 	MOV.L	[ R14 ], R15
 	ADD	#1, R15
 	MOV.L	R15, [ R14 ]

 	;/* Check accumulators. */
 	MVFACHI	#0, A0, R15
 	CMP #10H, R15
 	BNE RegTest1Error
 	MVFACLO	#0, A0, R15
 	CMP #20H, R15
 	BNE RegTest1Error
 	MVFACGU	#0, A0, R15
 	CMP #1H, R15
 	BNE RegTest1Error
 	MVFACHI	#0, A1, R15
 	CMP #30H, R15
 	BNE RegTest1Error
 	MVFACLO	#0, A1, R15
 	CMP #40H, R15
 	BNE RegTest1Error
 	MVFACGU	#0, A1, R15
 	CMP #2H, R15
 	BNE RegTest1Error

 	;/* Restore the clobbered registers. */
 	POPM	R14-R15

 	;/* Now compare each register to ensure it still contains the value that was
 	;set before this loop was entered. */
 	CMP	#10H, R1
 	BNE	RegTest2Error
 	CMP	#20H, R2
 	BNE	RegTest2Error
 	CMP	#30H, R3
 	BNE	RegTest2Error
 	CMP	#40H, R4
 	BNE	RegTest2Error
 	CMP	#50H, R5
 	BNE	RegTest2Error
 	CMP	#60H, R6
 	BNE	RegTest2Error
 	CMP	#70H, R7
 	BNE	RegTest2Error
 	CMP	#80H, R8
 	BNE	RegTest2Error
 	CMP	#90H, R9
 	BNE	RegTest2Error
 	CMP	#100H, R10
 	BNE	RegTest2Error
 	CMP	#110H, R11
 	BNE	RegTest2Error
 	CMP	#120H, R12
 	BNE	RegTest2Error
 	CMP	#130H, R13
 	BNE	RegTest2Error
 	CMP	#140H, R14
 	BNE	RegTest2Error
 	CMP	#150H, R15
 	BNE	RegTest2Error

 	;/* All comparisons passed, start a new itteratio of this loop. */
 	BRA	TestLoop2

 RegTest2Error:
 	;/* A compare failed, just loop here so the loop counter stops incrementing
 	;- causing the check task to indicate the error. */
 	BRA RegTest2Error


 	.END
	;/*
	; * FreeRTOS Kernel V10.2.0
	; * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
	; *
	; * Permission is hereby granted, free of charge, to any person obtaining a copy of
	; * this software and associated documentation files (the "Software"), to deal in
	; * the Software without restriction, including without limitation the rights to
	; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
	; * the Software, and to permit persons to whom the Software is furnished to do so,
	; * subject to the following conditions:
	; *
	; * The above copyright notice and this permission notice shall be included in all
	; * copies or substantial portions of the Software.
	; *
	; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
	; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
	; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
	; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
	; *
	; * http://www.FreeRTOS.org
	; * http://aws.amazon.com/freertos
	; *
	; * 1 tab == 4 spaces!
	; */

	.global _vRegTest1Implementation
	.global _vRegTest2Implementation

	.extern _ulRegTest1LoopCounter
	.extern _ulRegTest2LoopCounter

	.text


	;/* This function is explained in the comments at the top of main.c. */
	_vRegTest1Implementation:

	;/* Put a known value in the guard byte of the accumulators. */
	MOV.L #10, R1
	MVTACGU R1, A0
	MOV.L #20, R1
	MVTACGU R1, A1

	;/* Put a known value in each register. */
	MOV.L #1, R1
	MOV.L #2, R2
	MOV.L #3, R3
	MOV.L #4, R4
	MOV.L #5, R5
	MOV.L #6, R6
	MOV.L #7, R7
	MOV.L #8, R8
	MOV.L #9, R9
	MOV.L #10, R10
	MOV.L #11, R11
	MOV.L #12, R12
	MOV.L #13, R13
	MOV.L #14, R14
	MOV.L #15, R15

	;/* Put a known value in the hi and low of the accumulators. */
	MVTACHI R1, A0
	MVTACLO R2, A0
	MVTACHI R3, A1
	MVTACLO R4, A1

	;/* Loop, checking each iteration that each register still contains the
	;expected value. */
	TestLoop1:

	;/* Push the registers that are going to get clobbered. */
	PUSHM R14-R15

	;/* Increment the loop counter to show this task is still getting CPU time. */
	MOV.L #_ulRegTest1LoopCounter, R14
	MOV.L [ R14 ], R15
	ADD #1, R15
	MOV.L R15, [ R14 ]

	;/* Yield to extend the text coverage. Set the bit in the ITU SWINTR register. */
	MOV.L #1, R14
	MOV.L #0872E0H, R15
	MOV.B R14, [R15]
	NOP
	NOP

	;/* Check accumulators. */
	MVFACHI #0, A0, R15
	CMP #1, R15
	BNE RegTest1Error
	MVFACLO #0, A0, R15
	CMP #2, R15
	BNE RegTest1Error
	MVFACGU #0, A0, R15
	CMP #10, R15
	BNE RegTest1Error
	MVFACHI #0, A1, R15
	CMP #3, R15
	BNE RegTest1Error
	MVFACLO #0, A1, R15
	CMP #4, R15
	BNE RegTest1Error
	MVFACGU #0, A1, R15
	CMP #20, R15
	BNE RegTest1Error

	;/* Restore the clobbered registers. */
	POPM R14-R15

	;/* Now compare each register to ensure it still contains the value that was
	;set before this loop was entered. */
	CMP #1, R1
	BNE RegTest1Error
	CMP #2, R2
	BNE RegTest1Error
	CMP #3, R3
	BNE RegTest1Error
	CMP #4, R4
	BNE RegTest1Error
	CMP #5, R5
	BNE RegTest1Error
	CMP #6, R6
	BNE RegTest1Error
	CMP #7, R7
	BNE RegTest1Error
	CMP #8, R8
	BNE RegTest1Error
	CMP #9, R9
	BNE RegTest1Error
	CMP #10, R10
	BNE RegTest1Error
	CMP #11, R11
	BNE RegTest1Error
	CMP #12, R12
	BNE RegTest1Error
	CMP #13, R13
	BNE RegTest1Error
	CMP #14, R14
	BNE RegTest1Error
	CMP #15, R15
	BNE RegTest1Error

	;/* All comparisons passed, start a new itteratio of this loop. */
	BRA TestLoop1

	RegTest1Error:
	;/* A compare failed, just loop here so the loop counter stops incrementing
	;- causing the check task to indicate the error. */
	BRA RegTest1Error
	;/-----------------------------------------------------------/

	;/* This function is explained in the comments at the top of main.c. */
	_vRegTest2Implementation:

	;/* Put a known value in the guard byte of the accumulators. */
	MOV.L #1H, R1
	MVTACGU R1, A0
	MOV.L #2H, R1
	MVTACGU R1, A1

	;/* Put a known value in each general purpose register. */
	MOV.L #10H, R1
	MOV.L #20H, R2
	MOV.L #30H, R3
	MOV.L #40H, R4
	MOV.L #50H, R5
	MOV.L #60H, R6
	MOV.L #70H, R7
	MOV.L #80H, R8
	MOV.L #90H, R9
	MOV.L #100H, R10
	MOV.L #110H, R11
	MOV.L #120H, R12
	MOV.L #130H, R13
	MOV.L #140H, R14
	MOV.L #150H, R15

	;/* Put a known value in the hi and low of the accumulators. */
	MVTACHI R1, A0
	MVTACLO R2, A0
	MVTACHI R3, A1
	MVTACLO R4, A1

	;/* Loop, checking each iteration that each register still contains the
	;expected value. */
	TestLoop2:

	;/* Push the registers that are going to get clobbered. */
	PUSHM R14-R15

	;/* Increment the loop counter to show this task is still getting CPU time. */
	MOV.L #_ulRegTest2LoopCounter, R14
	MOV.L [ R14 ], R15
	ADD #1, R15
	MOV.L R15, [ R14 ]

	;/* Check accumulators. */
	MVFACHI #0, A0, R15
	CMP #10H, R15
	BNE RegTest1Error
	MVFACLO #0, A0, R15
	CMP #20H, R15
	BNE RegTest1Error
	MVFACGU #0, A0, R15
	CMP #1H, R15
	BNE RegTest1Error
	MVFACHI #0, A1, R15
	CMP #30H, R15
	BNE RegTest1Error
	MVFACLO #0, A1, R15
	CMP #40H, R15
	BNE RegTest1Error
	MVFACGU #0, A1, R15
	CMP #2H, R15
	BNE RegTest1Error

	;/* Restore the clobbered registers. */
	POPM R14-R15

	;/* Now compare each register to ensure it still contains the value that was
	;set before this loop was entered. */
	CMP #10H, R1
	BNE RegTest2Error
	CMP #20H, R2
	BNE RegTest2Error
	CMP #30H, R3
	BNE RegTest2Error
	CMP #40H, R4
	BNE RegTest2Error
	CMP #50H, R5
	BNE RegTest2Error
	CMP #60H, R6
	BNE RegTest2Error
	CMP #70H, R7
	BNE RegTest2Error
	CMP #80H, R8
	BNE RegTest2Error
	CMP #90H, R9
	BNE RegTest2Error
	CMP #100H, R10
	BNE RegTest2Error
	CMP #110H, R11
	BNE RegTest2Error
	CMP #120H, R12
	BNE RegTest2Error
	CMP #130H, R13
	BNE RegTest2Error
	CMP #140H, R14
	BNE RegTest2Error
	CMP #150H, R15
	BNE RegTest2Error

	;/* All comparisons passed, start a new itteratio of this loop. */
	BRA TestLoop2

	RegTest2Error:
	;/* A compare failed, just loop here so the loop counter stops incrementing
	;- causing the check task to indicate the error. */
	BRA RegTest2Error


	.END