/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */


#ifndef PORTMACRO_H
#define PORTMACRO_H

#include "intrinsics.h"

/* *INDENT-OFF* */
#ifdef __cplusplus
    extern "C" {
#endif
/* *INDENT-ON* */

/*-----------------------------------------------------------
 * Port specific definitions.
 *
 * The settings in this file configure FreeRTOS correctly for the
 * given hardware and compiler.
 *
 * These settings should not be altered.
 *-----------------------------------------------------------
 */

/* Type definitions. */
#if __riscv_xlen == 64
    #define portSTACK_TYPE           uint64_t
    #define portBASE_TYPE            int64_t
    #define portUBASE_TYPE           uint64_t
    #define portMAX_DELAY            ( TickType_t ) 0xffffffffffffffffUL
    #define portPOINTER_SIZE_TYPE    uint64_t
#elif __riscv_xlen == 32
    #define portSTACK_TYPE           uint32_t
    #define portBASE_TYPE            int32_t
    #define portUBASE_TYPE           uint32_t
    #define portMAX_DELAY            ( TickType_t ) 0xffffffffUL
#else /* if __riscv_xlen == 64 */
    #error "Assembler did not define __riscv_xlen"
#endif /* if __riscv_xlen == 64 */

typedef portSTACK_TYPE   StackType_t;
typedef portBASE_TYPE    BaseType_t;
typedef portUBASE_TYPE   UBaseType_t;
typedef portUBASE_TYPE   TickType_t;

/* Legacy type definitions. */
#define portCHAR                   char
#define portFLOAT                  float
#define portDOUBLE                 double
#define portLONG                   long
#define portSHORT                  short

/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
 * not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC    1
/*-----------------------------------------------------------*/

/* Architecture specifics. */
#define portSTACK_GROWTH          ( -1 )
#define portTICK_PERIOD_MS        ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#ifdef __riscv_32e
    #define portBYTE_ALIGNMENT    8         /* RV32E uses RISC-V EABI with reduced stack alignment requirements. */
#else
    #define portBYTE_ALIGNMENT    16
#endif
/*-----------------------------------------------------------*/

/* Scheduler utilities. */
extern void vTaskSwitchContext( void );
#define portYIELD()                                 __asm volatile ( "ecall" );
#define portEND_SWITCHING_ISR( xSwitchRequired )    do { if( xSwitchRequired ) vTaskSwitchContext( ); } while( 0 )
#define portYIELD_FROM_ISR( x )                     portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/

/* Critical section management. */
#define portCRITICAL_NESTING_IN_TCB    0

#define portSET_INTERRUPT_MASK_FROM_ISR()                          0
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue )    ( void ) uxSavedStatusValue

#define portDISABLE_INTERRUPTS()                                   __disable_interrupt()
#define portENABLE_INTERRUPTS()                                    __enable_interrupt()

extern size_t xCriticalNesting;
#define portENTER_CRITICAL()      \
    {                             \
        portDISABLE_INTERRUPTS(); \
        xCriticalNesting++;       \
    }

#define portEXIT_CRITICAL()          \
    {                                \
        xCriticalNesting--;          \
        if( xCriticalNesting == 0 )  \
        {                            \
            portENABLE_INTERRUPTS(); \
        }                            \
    }

/*-----------------------------------------------------------*/

/* Architecture specific optimisations. */
#if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 )

    #error "configUSE_PORT_OPTIMISED_TASK_SELECTION cannot yet be used in the IAR RISC-V port, the CLZ instruction needs to be emulated."

#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */


/*-----------------------------------------------------------*/

/* Task function macros as described on the FreeRTOS.org WEB site. These are
 * not necessary for to use this port.  They are defined so the common demo
 * files (which build with all the ports) will build. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters )    void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters )          void vFunction( void * pvParameters )

/*-----------------------------------------------------------*/

#define portNOP()    __asm volatile ( " nop " )
#define portINLINE              __inline

#ifndef portFORCE_INLINE
    #define portFORCE_INLINE    inline __attribute__( ( always_inline ) )
#endif

#define portMEMORY_BARRIER()    __asm volatile ( "" ::: "memory" )
/*-----------------------------------------------------------*/

/* Suppress warnings that are generated by the IAR tools, but cannot be fixed in
 * the source code because to do so would cause other compilers to generate
 * warnings. */
#pragma diag_suppress=Pa082

/* configCLINT_BASE_ADDRESS is a legacy definition that was replaced by the
 * configMTIME_BASE_ADDRESS and configMTIMECMP_BASE_ADDRESS definitions.  For
 * backward compatibility derive the newer definitions from the old if the old
 * definition is found. */
#if defined( configCLINT_BASE_ADDRESS ) && !defined( configMTIME_BASE_ADDRESS ) && ( configCLINT_BASE_ADDRESS == 0 )

/* Legacy case where configCLINT_BASE_ADDRESS was defined as 0 to indicate
 * there was no CLINT.  Equivalent now is to set the MTIME and MTIMECMP
 * addresses to 0. */
    #define configMTIME_BASE_ADDRESS       ( 0 )
    #define configMTIMECMP_BASE_ADDRESS    ( 0 )
#elif defined( configCLINT_BASE_ADDRESS ) && !defined( configMTIME_BASE_ADDRESS )

/* Legacy case where configCLINT_BASE_ADDRESS was set to the base address of
 * the CLINT.  Equivalent now is to derive the MTIME and MTIMECMP addresses
 * from the CLINT address. */
    #define configMTIME_BASE_ADDRESS       ( ( configCLINT_BASE_ADDRESS ) + 0xBFF8UL )
    #define configMTIMECMP_BASE_ADDRESS    ( ( configCLINT_BASE_ADDRESS ) + 0x4000UL )
#elif !defined( configMTIME_BASE_ADDRESS ) || !defined( configMTIMECMP_BASE_ADDRESS )
    #error "configMTIME_BASE_ADDRESS and configMTIMECMP_BASE_ADDRESS must be defined in FreeRTOSConfig.h.  Set them to zero if there is no MTIME (machine time) clock.  See www.FreeRTOS.org/Using-FreeRTOS-on-RISC-V.html"
#endif /* if defined( configCLINT_BASE_ADDRESS ) && !defined( configMTIME_BASE_ADDRESS ) && ( configCLINT_BASE_ADDRESS == 0 ) */

/* *INDENT-OFF* */
#ifdef __cplusplus
    }
#endif
/* *INDENT-ON* */

#endif /* PORTMACRO_H */