/*
    FreeRTOS V8.2.0rc1 - Copyright (C) 2014 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    1 tab == 4 spaces!

    ***************************************************************************
     *                                                                       *
     *    Having a problem?  Start by reading the FAQ "My application does   *
     *    not run, what could be wrong?".  Have you defined configASSERT()?  *
     *                                                                       *
     *    http://www.FreeRTOS.org/FAQHelp.html                               *
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *   Investing in training allows your team to be as productive as       *
     *   possible as early as possible, lowering your overall development    *
     *   cost, and enabling you to bring a more robust product to market     *
     *   earlier than would otherwise be possible.  Richard Barry is both    *
     *   the architect and key author of FreeRTOS, and so also the world's   *
     *   leading authority on what is the world's most popular real time     *
     *   kernel for deeply embedded MCU designs.  Obtaining your training    *
     *   from Richard ensures your team will gain directly from his in-depth *
     *   product knowledge and years of usage experience.  Contact Real Time *
     *   Engineers Ltd to enquire about the FreeRTOS Masterclass, presented  *
     *   by Richard Barry:  http://www.FreeRTOS.org/contact
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *    You are receiving this top quality software for free.  Please play *
     *    fair and reciprocate by reporting any suspected issues and         *
     *    participating in the community forum:                              *
     *    http://www.FreeRTOS.org/support                                    *
     *                                                                       *
     *    Thank you!                                                         *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
    license and Real Time Engineers Ltd. contact details.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

/*
 * Creates all the demo application tasks, then starts the scheduler.  The WEB
 * documentation provides more details of the standard demo application tasks.
 * In addition to the standard demo tasks, the following tasks and tests are
 * defined and/or created within this file:
 *
 * "Fast Interrupt Test" - A high frequency periodic interrupt is generated
 * using a free running timer to demonstrate the use of the
 * configKERNEL_INTERRUPT_PRIORITY configuration constant.  The interrupt
 * service routine measures the number of processor clocks that occur between
 * each interrupt - and in so doing measures the jitter in the interrupt timing.
 * The maximum measured jitter time is latched in the ulMaxJitter variable, and
 * displayed on the LCD by the 'Check' task as described below.  The
 * fast interrupt is configured and handled in the timertest.c source file.
 *
 * "LCD" task - the LCD task is a 'gatekeeper' task.  It is the only task that
 * is permitted to access the display directly.  Other tasks wishing to write a
 * message to the LCD send the message on a queue to the LCD task instead of
 * accessing the LCD themselves.  The LCD task just blocks on the queue waiting
 * for messages - waking and displaying the messages as they arrive.
 *
 * "Check" task -  This only executes every five seconds but has the highest
 * priority so is guaranteed to get processor time.  Its main function is to
 * check that all the standard demo tasks are still operational.  Should any
 * unexpected behaviour within a demo task be discovered the 'check' task will
 * write an error to the LCD (via the LCD task).  If all the demo tasks are
 * executing with their expected behaviour then the check task writes PASS
 * along with the max jitter time to the LCD (again via the LCD task), as
 * described above.
 *
 */

/* Standard includes. */
#include <stdio.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"

/* Library includes. */
#include "stm32f10x_it.h"

/* Demo app includes. */
#include "lcd.h"
#include "LCD_Message.h"
#include "BlockQ.h"
#include "death.h"
#include "integer.h"
#include "blocktim.h"
#include "partest.h"
#include "semtest.h"
#include "PollQ.h"
#include "flash.h"
#include "comtest2.h"

/* Task priorities. */
#define mainQUEUE_POLL_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainCHECK_TASK_PRIORITY				( tskIDLE_PRIORITY + 3 )
#define mainSEM_TEST_PRIORITY				( tskIDLE_PRIORITY + 1 )
#define mainBLOCK_Q_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainCREATOR_TASK_PRIORITY           ( tskIDLE_PRIORITY + 3 )
#define mainFLASH_TASK_PRIORITY				( tskIDLE_PRIORITY + 1 )
#define mainCOM_TEST_PRIORITY				( tskIDLE_PRIORITY + 1 )
#define mainINTEGER_TASK_PRIORITY           ( tskIDLE_PRIORITY )

/* Constants related to the LCD. */
#define mainMAX_LINE						( 240 )
#define mainROW_INCREMENT					( 24 )
#define mainMAX_COLUMN						( 20 )
#define mainCOLUMN_START					( 319 )
#define mainCOLUMN_INCREMENT 				( 16 )

/* The maximum number of message that can be waiting for display at any one
time. */
#define mainLCD_QUEUE_SIZE					( 3 )

/* The check task uses the sprintf function so requires a little more stack. */
#define mainCHECK_TASK_STACK_SIZE			( configMINIMAL_STACK_SIZE + 50 )

/* Dimensions the buffer into which the jitter time is written. */
#define mainMAX_MSG_LEN						25

/* The time between cycles of the 'check' task. */
#define mainCHECK_DELAY						( ( TickType_t ) 5000 / portTICK_PERIOD_MS )

/* The number of nano seconds between each processor clock. */
#define mainNS_PER_CLOCK ( ( unsigned long ) ( ( 1.0 / ( double ) configCPU_CLOCK_HZ ) * 1000000000.0 ) )

/* Baud rate used by the comtest tasks. */
#define mainCOM_TEST_BAUD_RATE		( 115200 )

/* The LED used by the comtest tasks. See the comtest.c file for more
information. */
#define mainCOM_TEST_LED			( 3 )

/*-----------------------------------------------------------*/

/*
 * Configure the clocks, GPIO and other peripherals as required by the demo.
 */
static void prvSetupHardware( void );

/*
 * Configure the LCD as required by the demo.
 */
static void prvConfigureLCD( void );

/*
 * The LCD is written two by more than one task so is controlled by a
 * 'gatekeeper' task.  This is the only task that is actually permitted to
 * access the LCD directly.  Other tasks wanting to display a message send
 * the message to the gatekeeper.
 */
static void vLCDTask( void *pvParameters );

/*
 * Retargets the C library printf function to the USART.
 */
int fputc( int ch, FILE *f );

/*
 * Checks the status of all the demo tasks then prints a message to the
 * display.  The message will be either PASS - and include in brackets the
 * maximum measured jitter time (as described at the to of the file), or a
 * message that describes which of the standard demo tasks an error has been
 * discovered in.
 *
 * Messages are not written directly to the terminal, but passed to vLCDTask
 * via a queue.
 */
static void vCheckTask( void *pvParameters );

/*
 * Configures the timers and interrupts for the fast interrupt test as
 * described at the top of this file.
 */
extern void vSetupTimerTest( void );

/*-----------------------------------------------------------*/

/* The queue used to send messages to the LCD task. */
QueueHandle_t xLCDQueue;

/*-----------------------------------------------------------*/

int main( void )
{
#ifdef DEBUG
  debug();
#endif

	prvSetupHardware();

	/* Create the queue used by the LCD task.  Messages for display on the LCD
	are received via this queue. */
	xLCDQueue = xQueueCreate( mainLCD_QUEUE_SIZE, sizeof( xLCDMessage ) );

	/* Start the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
	vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );

	/* Start the tasks defined within this file/specific to this demo. */
    xTaskCreate( vCheckTask, "Check", mainCHECK_TASK_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
	xTaskCreate( vLCDTask, "LCD", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	/* The suicide tasks must be created last as they need to know how many
	tasks were running prior to their creation in order to ascertain whether
	or not the correct/expected number of tasks are running at any given time. */
    vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Configure the timers used by the fast interrupt timer test. */
	vSetupTimerTest();

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* Will only get here if there was not enough heap space to create the
	idle task. */
	return 0;
}
/*-----------------------------------------------------------*/

void vLCDTask( void *pvParameters )
{
xLCDMessage xMessage;

	/* Initialise the LCD and display a startup message. */
	prvConfigureLCD();
	LCD_DrawMonoPict( ( unsigned long * ) pcBitmap );

	for( ;; )
	{
		/* Wait for a message to arrive that requires displaying. */
		while( xQueueReceive( xLCDQueue, &xMessage, portMAX_DELAY ) != pdPASS );

		/* Display the message.  Print each message to a different position. */
		printf( ( char const * ) xMessage.pcMessage );
	}
}
/*-----------------------------------------------------------*/

static void vCheckTask( void *pvParameters )
{
TickType_t xLastExecutionTime;
xLCDMessage xMessage;
static signed char cPassMessage[ mainMAX_MSG_LEN ];
extern unsigned short usMaxJitter;

	xLastExecutionTime = xTaskGetTickCount();
	xMessage.pcMessage = cPassMessage;

    for( ;; )
	{
		/* Perform this check every mainCHECK_DELAY milliseconds. */
		vTaskDelayUntil( &xLastExecutionTime, mainCHECK_DELAY );

		/* Has an error been found in any task? */

        if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK Q\n";
		}
		else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK TIME\n";
		}
        else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
        {
            xMessage.pcMessage = "ERROR IN SEMAPHORE\n";
        }
        else if( xArePollingQueuesStillRunning() != pdTRUE )
        {
            xMessage.pcMessage = "ERROR IN POLL Q\n";
        }
        else if( xIsCreateTaskStillRunning() != pdTRUE )
        {
            xMessage.pcMessage = "ERROR IN CREATE\n";
        }
        else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
        {
            xMessage.pcMessage = "ERROR IN MATH\n";
        }
		else if( xAreComTestTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN COM TEST\n";
		}
		else
		{
			sprintf( ( char * ) cPassMessage, "PASS [%uns]\n", ( ( unsigned long ) usMaxJitter ) * mainNS_PER_CLOCK );
		}

		/* Send the message to the LCD gatekeeper for display. */
		xQueueSend( xLCDQueue, &xMessage, portMAX_DELAY );
	}
}
/*-----------------------------------------------------------*/

static void prvSetupHardware( void )
{
	/* Start with the clocks in their expected state. */
	RCC_DeInit();

	/* Enable HSE (high speed external clock). */
	RCC_HSEConfig( RCC_HSE_ON );

	/* Wait till HSE is ready. */
	while( RCC_GetFlagStatus( RCC_FLAG_HSERDY ) == RESET )
	{
	}

	/* 2 wait states required on the flash. */
	*( ( unsigned long * ) 0x40022000 ) = 0x02;

	/* HCLK = SYSCLK */
	RCC_HCLKConfig( RCC_SYSCLK_Div1 );

	/* PCLK2 = HCLK */
	RCC_PCLK2Config( RCC_HCLK_Div1 );

	/* PCLK1 = HCLK/2 */
	RCC_PCLK1Config( RCC_HCLK_Div2 );

	/* PLLCLK = 8MHz * 9 = 72 MHz. */
	RCC_PLLConfig( RCC_PLLSource_HSE_Div1, RCC_PLLMul_9 );

	/* Enable PLL. */
	RCC_PLLCmd( ENABLE );

	/* Wait till PLL is ready. */
	while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
	{
	}

	/* Select PLL as system clock source. */
	RCC_SYSCLKConfig( RCC_SYSCLKSource_PLLCLK );

	/* Wait till PLL is used as system clock source. */
	while( RCC_GetSYSCLKSource() != 0x08 )
	{
	}

	/* Enable GPIOA, GPIOB, GPIOC, GPIOD, GPIOE and AFIO clocks */
	RCC_APB2PeriphClockCmd(	RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |RCC_APB2Periph_GPIOC
							| RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | RCC_APB2Periph_AFIO, ENABLE );

	/* SPI2 Periph clock enable */
	RCC_APB1PeriphClockCmd( RCC_APB1Periph_SPI2, ENABLE );


	/* Set the Vector Table base address at 0x08000000 */
	NVIC_SetVectorTable( NVIC_VectTab_FLASH, 0x0 );

	NVIC_PriorityGroupConfig( NVIC_PriorityGroup_4 );

	/* Configure HCLK clock as SysTick clock source. */
	SysTick_CLKSourceConfig( SysTick_CLKSource_HCLK );

	vParTestInitialise();
}
/*-----------------------------------------------------------*/

static void prvConfigureLCD( void )
{
GPIO_InitTypeDef GPIO_InitStructure;

	/* Configure LCD Back Light (PA8) as output push-pull */
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_Init( GPIOA, &GPIO_InitStructure );

	/* Set the Backlight Pin */
	GPIO_WriteBit(GPIOA, GPIO_Pin_8, Bit_SET);

	/* Initialize the LCD */
	LCD_Init();

	/* Set the Back Color */
	LCD_SetBackColor( White );

	/* Set the Text Color */
	LCD_SetTextColor( 0x051F );

	LCD_Clear();
}
/*-----------------------------------------------------------*/

int fputc( int ch, FILE *f )
{
static unsigned short usColumn = 0, usRefColumn = mainCOLUMN_START;
static unsigned char ucLine = 0;

	if( ( usColumn == 0 ) && ( ucLine == 0 ) )
	{
		LCD_Clear();
	}

	if( ch != '\n' )
	{
		/* Display one character on LCD */
		LCD_DisplayChar( ucLine, usRefColumn, (u8) ch );

		/* Decrement the column position by 16 */
		usRefColumn -= mainCOLUMN_INCREMENT;

		/* Increment the character counter */
		usColumn++;
		if( usColumn == mainMAX_COLUMN )
		{
			ucLine += mainROW_INCREMENT;
			usRefColumn = mainCOLUMN_START;
			usColumn = 0;
		}
	}
	else
	{
		/* Move back to the first column of the next line. */
		ucLine += mainROW_INCREMENT;
		usRefColumn = mainCOLUMN_START;
		usColumn = 0;
	}

	/* Wrap back to the top of the display. */
	if( ucLine >= mainMAX_LINE )
	{
		ucLine = 0;
	}

	return ch;
}
/*-----------------------------------------------------------*/

#ifdef  DEBUG
/* Keep the linker happy. */
void assert_failed( unsigned char* pcFile, unsigned long ulLine )
{
	for( ;; )
	{
	}
}
#endif