/*
    FreeRTOS V8.2.0rc1 - Copyright (C) 2014 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    1 tab == 4 spaces!

    ***************************************************************************
     *                                                                       *
     *    Having a problem?  Start by reading the FAQ "My application does   *
     *    not run, what could be wrong?".  Have you defined configASSERT()?  *
     *                                                                       *
     *    http://www.FreeRTOS.org/FAQHelp.html                               *
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *   Investing in training allows your team to be as productive as       *
     *   possible as early as possible, lowering your overall development    *
     *   cost, and enabling you to bring a more robust product to market     *
     *   earlier than would otherwise be possible.  Richard Barry is both    *
     *   the architect and key author of FreeRTOS, and so also the world's   *
     *   leading authority on what is the world's most popular real time     *
     *   kernel for deeply embedded MCU designs.  Obtaining your training    *
     *   from Richard ensures your team will gain directly from his in-depth *
     *   product knowledge and years of usage experience.  Contact Real Time *
     *   Engineers Ltd to enquire about the FreeRTOS Masterclass, presented  *
     *   by Richard Barry:  http://www.FreeRTOS.org/contact
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *    You are receiving this top quality software for free.  Please play *
     *    fair and reciprocate by reporting any suspected issues and         *
     *    participating in the community forum:                              *
     *    http://www.FreeRTOS.org/support                                    *
     *                                                                       *
     *    Thank you!                                                         *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
    license and Real Time Engineers Ltd. contact details.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

/*
 * Creates all the demo application tasks, then starts the scheduler.  The WEB
 * documentation provides more details of the standard demo application tasks.
 * In addition to the standard demo tasks, the following tasks and tests are
 * defined and/or created within this file:
 *
 * "Fast Interrupt Test" - A high frequency periodic interrupt is generated
 * using a free running timer to demonstrate the use of the
 * configKERNEL_INTERRUPT_PRIORITY configuration constant.  The interrupt
 * service routine measures the number of processor clocks that occur between
 * each interrupt - and in so doing measures the jitter in the interrupt timing.
 * The maximum measured jitter time is latched in the ulMaxJitter variable, and
 * displayed on the LCD by the 'Check' task as described below.  The
 * fast interrupt is configured and handled in the timertest.c source file.
 *
 * "LCD" task - the LCD task is a 'gatekeeper' task.  It is the only task that
 * is permitted to access the display directly.  Other tasks wishing to write a
 * message to the LCD send the message on a queue to the LCD task instead of
 * accessing the LCD themselves.  The LCD task just blocks on the queue waiting
 * for messages - waking and displaying the messages as they arrive.  Messages
 * can either be a text string to display, or an instruction to update MEMS
 * input.  The MEMS input is used to display a ball that can be moved around
 * LCD by tilting the STM32 Primer.  45% is taken as the neutral position.
 *
 * "Check" task -  This only executes every five seconds but has the highest
 * priority so is guaranteed to get processor time.  Its main function is to
 * check that all the standard demo tasks are still operational.  Should any
 * unexpected behaviour within a demo task be discovered the 'check' task will
 * write an error to the LCD (via the LCD task).  If all the demo tasks are
 * executing with their expected behaviour then the check task writes PASS
 * along with the max jitter time to the LCD (again via the LCD task), as
 * described above.
 *
 * Tick Hook - A tick hook is provided just for demonstration purposes.  In
 * this case it is used to periodically send an instruction to updated the
 * MEMS input to the LCD task.
 *
 */

/* CircleOS includes.  Some of the CircleOS peripheral functionality is
utilised, although CircleOS itself is not used. */
#include "circle.h"

/* Standard includes. */
#include <string.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"

/* Demo app includes. */
#include "BlockQ.h"
#include "blocktim.h"
#include "GenQTest.h"
#include "partest.h"
#include "QPeek.h"

/* The bitmap used to display the FreeRTOS.org logo is stored in 16bit format
and therefore takes up a large proportion of the Flash space.  Setting this
parameter to 0 excludes the bitmap from the build, freeing up Flash space for
extra code. */
#define mainINCLUDE_BITMAP 					0

#if mainINCLUDE_BITMAP == 1
	#include "bitmap.h"
#endif

/* Task priorities. */
#define mainQUEUE_POLL_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainCHECK_TASK_PRIORITY				( tskIDLE_PRIORITY + 3 )
#define mainBLOCK_Q_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainGEN_Q_PRIORITY					( tskIDLE_PRIORITY + 0 )
#define mainFLASH_TASK_PRIORITY				( tskIDLE_PRIORITY + 2 )

/* Splash screen related constants. */
#define mainBITMAP_Y 						( 38 )
#define mainBITMAP_X						( 18 )
#define mainURL_Y							( 8 )
#define mainURL_X							( 78 )
#define mainSPLASH_SCREEN_DELAY		( 2000 / portTICK_PERIOD_MS )

/* Text drawing related constants. */
#define mainLCD_CHAR_HEIGHT			( 13 )
#define mainLCD_MAX_Y				( 110 )

/* The maximum number of message that can be waiting for display at any one
time. */
#define mainLCD_QUEUE_SIZE					( 3 )

/* The check task uses the sprintf function so requires a little more stack. */
#define mainCHECK_TASK_STACK_SIZE			( configMINIMAL_STACK_SIZE + 50 )

/* The LCD task calls some of the CircleOS functions (for MEMS and LCD access),
these can require a larger stack. */
#define configLCD_TASK_STACK_SIZE			( configMINIMAL_STACK_SIZE + 50 )

/* Dimensions the buffer into which the jitter time is written. */
#define mainMAX_MSG_LEN						25

/* The time between cycles of the 'check' task. */
#define mainCHECK_DELAY						( ( TickType_t ) 5000 / portTICK_PERIOD_MS )

/* The period at which the MEMS input should be updated. */
#define mainMEMS_DELAY						( ( TickType_t ) 100 / portTICK_PERIOD_MS )

/* The rate at which the flash task toggles the LED. */
#define mainFLASH_DELAY						( ( TickType_t ) 1000 / portTICK_PERIOD_MS )

/* The number of nano seconds between each processor clock. */
#define mainNS_PER_CLOCK ( ( unsigned long ) ( ( 1.0 / ( double ) configCPU_CLOCK_HZ ) * 1000000000.0 ) )

/* The two types of message that can be sent to the LCD task. */
#define mainUPDATE_BALL_MESSAGE				( 0 )
#define mainWRITE_STRING_MESSAGE			( 1 )

/* Type of the message sent to the LCD task. */
typedef struct
{
	portBASE_TYPE xMessageType;
	signed char *pcMessage;
} xLCDMessage;

/*-----------------------------------------------------------*/

/*
 * Configure the clocks, GPIO and other peripherals as required by the demo.
 */
static void prvSetupHardware( void );

/*
 * The LCD is written two by more than one task so is controlled by a
 * 'gatekeeper' task.  This is the only task that is actually permitted to
 * access the LCD directly.  Other tasks wanting to display a message send
 * the message to the gatekeeper.
 */
static void prvLCDTask( void *pvParameters );

/*
 * Checks the status of all the demo tasks then prints a message to the
 * display.  The message will be either PASS - and include in brackets the
 * maximum measured jitter time (as described at the to of the file), or a
 * message that describes which of the standard demo tasks an error has been
 * discovered in.
 *
 * Messages are not written directly to the terminal, but passed to prvLCDTask
 * via a queue.
 *
 * The check task also receives instructions to update the MEMS input, which
 * in turn can also lead to the LCD being updated.
 */
static void prvCheckTask( void *pvParameters );

/*
 * Configures the timers and interrupts for the fast interrupt test as
 * described at the top of this file.
 */
extern void vSetupTimerTest( void );

/*
 * A cut down version of sprintf() used to percent the HUGE GCC library
 * equivalent from being included in the binary image.
 */
extern int sprintf(char *out, const char *format, ...);

/*
 * Simple toggle the LED periodically for timing verification.
 */
static void prvFlashTask( void *pvParameters );

/*-----------------------------------------------------------*/

/* The queue used to send messages to the LCD task. */
QueueHandle_t xLCDQueue;

/*-----------------------------------------------------------*/

int main( void )
{
	#ifdef DEBUG
		debug();
	#endif

	prvSetupHardware();

	/* Create the queue used by the LCD task.  Messages for display on the LCD
	are received via this queue. */
	xLCDQueue = xQueueCreate( mainLCD_QUEUE_SIZE, sizeof( xLCDMessage ) );

	/* Start the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
	vStartGenericQueueTasks( mainGEN_Q_PRIORITY );
	vStartQueuePeekTasks();
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );

	/* Start the tasks defined within this file/specific to this demo. */
    xTaskCreate( prvCheckTask, "Check", mainCHECK_TASK_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
	xTaskCreate( prvLCDTask, "LCD", configLCD_TASK_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvFlashTask, "Flash", configMINIMAL_STACK_SIZE, NULL, mainFLASH_TASK_PRIORITY, NULL );

	/* Configure the timers used by the fast interrupt timer test. */
	vSetupTimerTest();

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* Will only get here if there was not enough heap space to create the
	idle task. */
	return 0;
}
/*-----------------------------------------------------------*/

void prvLCDTask( void *pvParameters )
{
xLCDMessage xMessage;
char cY = mainLCD_CHAR_HEIGHT;
const char * const pcString = "www.FreeRTOS.org";
const char * const pcBlankLine = "                  ";

	DRAW_Init();

	#if mainINCLUDE_BITMAP == 1
		DRAW_SetImage( pucImage, mainBITMAP_Y, mainBITMAP_X, bmpBITMAP_HEIGHT, bmpBITMAP_WIDTH );
	#endif

	LCD_SetScreenOrientation( V9 );
	DRAW_DisplayString( mainURL_Y, mainURL_X, pcString, strlen( pcString ) );
	vTaskDelay( mainSPLASH_SCREEN_DELAY );
	LCD_FillRect( 0, 0, CHIP_SCREEN_WIDTH, CHIP_SCREEN_HEIGHT, RGB_WHITE );

	for( ;; )
	{
		/* Wait for a message to arrive that requires displaying. */
		while( xQueueReceive( xLCDQueue, &xMessage, portMAX_DELAY ) != pdPASS );

		/* Check the message type. */
		if( xMessage.xMessageType == mainUPDATE_BALL_MESSAGE )
		{
			/* Read the MEMS and update the ball display on the LCD if required. */
			MEMS_Handler();
			POINTER_Handler();
		}
		else
		{
			/* A text string was sent.  First blank off the old text string, then
			draw the new text on the next line down. */
			DRAW_DisplayString( 0, cY, pcBlankLine, strlen( pcBlankLine ) );

			cY -= mainLCD_CHAR_HEIGHT;
			if( cY <= ( mainLCD_CHAR_HEIGHT - 1 ) )
			{
				/* Wrap the line onto which we are going to write the text. */
				cY = mainLCD_MAX_Y;
			}

			/* Display the message. */
			DRAW_DisplayString( 0, cY, xMessage.pcMessage, strlen( xMessage.pcMessage ) );
		}
	}
}
/*-----------------------------------------------------------*/

static void prvCheckTask( void *pvParameters )
{
TickType_t xLastExecutionTime;
xLCDMessage xMessage;
static signed char cPassMessage[ mainMAX_MSG_LEN ];
extern unsigned short usMaxJitter;

	/* Initialise the xLastExecutionTime variable on task entry. */
	xLastExecutionTime = xTaskGetTickCount();

	/* Setup the message we are going to send to the LCD task. */
	xMessage.xMessageType = mainWRITE_STRING_MESSAGE;
	xMessage.pcMessage = cPassMessage;

    for( ;; )
	{
		/* Perform this check every mainCHECK_DELAY milliseconds. */
		vTaskDelayUntil( &xLastExecutionTime, mainCHECK_DELAY );

		/* Has an error been found in any task?   If so then point the text
		we are going to send to the LCD task to an error message instead of
		the PASS message. */
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN GEN Q";
		}
        if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK Q";
		}
		else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK TIME";
		}
        else if( xArePollingQueuesStillRunning() != pdTRUE )
        {
            xMessage.pcMessage = "ERROR IN POLL Q";
        }
		else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN PEEK Q";
		}
		else
		{
			/* No errors were found in any task, so send a pass message
			with the max measured jitter time also included (as per the
			fast interrupt test described at the top of this file and on
			the online documentation page for this demo application). */
			sprintf( ( char * ) cPassMessage, "PASS [%uns]", ( ( unsigned long ) usMaxJitter ) * mainNS_PER_CLOCK );
		}

		/* Send the message to the LCD gatekeeper for display. */
		xQueueSend( xLCDQueue, &xMessage, portMAX_DELAY );
	}
}
/*-----------------------------------------------------------*/

void vApplicationTickHook( void )
{
static unsigned long ulCallCount;
static const xLCDMessage xMemsMessage = { mainUPDATE_BALL_MESSAGE, NULL };
static portBASE_TYPE xHigherPriorityTaskWoken;

	/* Periodically send a message to the LCD task telling it to update
	the MEMS input, and then if necessary the LCD. */
	ulCallCount++;
	if( ulCallCount >= mainMEMS_DELAY )
	{
		ulCallCount = 0;
		xHigherPriorityTaskWoken = pdFALSE;
		xQueueSendFromISR( xLCDQueue, &xMemsMessage, &xHigherPriorityTaskWoken );
	}
}
/*-----------------------------------------------------------*/

static void prvSetupHardware( void )
{
	/* Start with the clocks in their expected state. */
	RCC_DeInit();

	/* Enable HSE (high speed external clock). */
	RCC_HSEConfig( RCC_HSE_ON );

	/* Wait till HSE is ready. */
	while( RCC_GetFlagStatus( RCC_FLAG_HSERDY ) == RESET )
	{
	}

	/* 2 wait states required on the flash. */
	*( ( unsigned long * ) 0x40022000 ) = 0x02;

	/* HCLK = SYSCLK */
	RCC_HCLKConfig( RCC_SYSCLK_Div1 );

	/* PCLK2 = HCLK */
	RCC_PCLK2Config( RCC_HCLK_Div1 );

	/* PCLK1 = HCLK/2 */
	RCC_PCLK1Config( RCC_HCLK_Div2 );

	/* PLLCLK = 12MHz * 6 = 72 MHz. */
	RCC_PLLConfig( RCC_PLLSource_HSE_Div1, RCC_PLLMul_6 );

	/* Enable PLL. */
	RCC_PLLCmd( ENABLE );

	/* Wait till PLL is ready. */
	while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
	{
	}

	/* Select PLL as system clock source. */
	RCC_SYSCLKConfig( RCC_SYSCLKSource_PLLCLK );

	/* Wait till PLL is used as system clock source. */
	while( RCC_GetSYSCLKSource() != 0x08 )
	{
	}

	/* Enable GPIOA, GPIOB, GPIOC, GPIOD, GPIOE and AFIO clocks */
	RCC_APB2PeriphClockCmd(	RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |RCC_APB2Periph_GPIOC
							| RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | RCC_APB2Periph_AFIO, ENABLE );

	/* SPI2 Periph clock enable */
	RCC_APB1PeriphClockCmd( RCC_APB1Periph_SPI2, ENABLE );


	/* Set the Vector Table base address at 0x08000000 */
	NVIC_SetVectorTable( NVIC_VectTab_FLASH, 0x0 );

	NVIC_PriorityGroupConfig( NVIC_PriorityGroup_4 );

	/* Configure HCLK clock as SysTick clock source. */
	SysTick_CLKSourceConfig( SysTick_CLKSource_HCLK );

	/* Misc initialisation, including some of the CircleOS features.  Note
	that CircleOS itself is not used. */
	vParTestInitialise();
	MEMS_Init();
	POINTER_Init();
	POINTER_SetMode( POINTER_RESTORE_LESS );
}
/*-----------------------------------------------------------*/

static void prvFlashTask( void *pvParameters )
{
TickType_t xLastExecutionTime;

	/* Initialise the xLastExecutionTime variable on task entry. */
	xLastExecutionTime = xTaskGetTickCount();

    for( ;; )
	{
		/* Simple toggle the LED periodically.  This just provides some timing
		verification. */
		vTaskDelayUntil( &xLastExecutionTime, mainFLASH_DELAY );
		vParTestToggleLED( 0 );
	}
}
/*-----------------------------------------------------------*/

void starting_delay( unsigned long ul )
{
	vTaskDelay( ( TickType_t ) ul );
}