/*
    FreeRTOS V8.2.0rc1 - Copyright (C) 2014 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    1 tab == 4 spaces!

    ***************************************************************************
     *                                                                       *
     *    Having a problem?  Start by reading the FAQ "My application does   *
     *    not run, what could be wrong?".  Have you defined configASSERT()?  *
     *                                                                       *
     *    http://www.FreeRTOS.org/FAQHelp.html                               *
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *   Investing in training allows your team to be as productive as       *
     *   possible as early as possible, lowering your overall development    *
     *   cost, and enabling you to bring a more robust product to market     *
     *   earlier than would otherwise be possible.  Richard Barry is both    *
     *   the architect and key author of FreeRTOS, and so also the world's   *
     *   leading authority on what is the world's most popular real time     *
     *   kernel for deeply embedded MCU designs.  Obtaining your training    *
     *   from Richard ensures your team will gain directly from his in-depth *
     *   product knowledge and years of usage experience.  Contact Real Time *
     *   Engineers Ltd to enquire about the FreeRTOS Masterclass, presented  *
     *   by Richard Barry:  http://www.FreeRTOS.org/contact
     *                                                                       *
    ***************************************************************************

    ***************************************************************************
     *                                                                       *
     *    You are receiving this top quality software for free.  Please play *
     *    fair and reciprocate by reporting any suspected issues and         *
     *    participating in the community forum:                              *
     *    http://www.FreeRTOS.org/support                                    *
     *                                                                       *
     *    Thank you!                                                         *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
    license and Real Time Engineers Ltd. contact details.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

/*
Changes from V1.00:
	
	+ Call to taskYIELD() from within tick ISR has been replaced by the more
	  efficient portSWITCH_CONTEXT().
	+ ISR function definitions renamed to include the prv prefix.

Changes from V1.2.0:

	+ prvPortResetPIC() is now called last thing before the end of the 
	  preemptive tick routine.

Changes from V2.6.1

	+ Replaced the sUsingPreemption variable with the configUSE_PREEMPTION
	  macro to be consistent with the later ports.

Changes from V4.0.1
	
	+ Add function prvSetTickFrequencyDefault() to set the DOS tick back to
	  its proper value when the scheduler exits. 
*/

#include <stdlib.h>
#include <stdio.h>
#include <i86.h>
#include <dos.h>
#include <setjmp.h>

#include "FreeRTOS.h"
#include "task.h"
#include "portasm.h"

/*-----------------------------------------------------------
 * Implementation of functions defined in portable.h for the industrial
 * PC port.
 *----------------------------------------------------------*/

/*lint -e950 Non ANSI reserved words okay in this file only. */

#define portTIMER_INT_NUMBER	0x08

/* Setup hardware for required tick interrupt rate. */
static void prvSetTickFrequency( uint32_t ulTickRateHz );

/* Restore hardware to as it was prior to starting the scheduler. */
static void prvExitFunction( void );

/* Either chain to the DOS tick (which itself clears the PIC) or clear the PIC
directly.  We chain to the DOS tick as close as possible to the standard DOS
tick rate. */
static void prvPortResetPIC( void );

/* The tick ISR used depends on whether the preemptive or cooperative scheduler
is being used. */
#if configUSE_PREEMPTION == 1
	/* Tick service routine used by the scheduler when preemptive scheduling is
	being used. */
	static void __interrupt __far prvPreemptiveTick( void );
#else
	/* Tick service routine used by the scheduler when cooperative scheduling is 
	being used. */
	static void __interrupt __far prvNonPreemptiveTick( void );
#endif
/* Trap routine used by taskYIELD() to manually cause a context switch. */
static void __interrupt __far prvYieldProcessor( void );

/* Set the tick frequency back so the floppy drive works correctly when the
scheduler exits. */
static void prvSetTickFrequencyDefault( void );

/*lint -e956 File scopes necessary here. */

/* Used to signal when to chain to the DOS tick, and when to just clear the PIC ourselves. */
static int16_t sDOSTickCounter;							

/* Set true when the vectors are set so the scheduler will service the tick. */
static int16_t sSchedulerRunning = pdFALSE;				

/* Points to the original routine installed on the vector we use for manual context switches.  This is then used to restore the original routine during prvExitFunction(). */
static void ( __interrupt __far *pxOldSwitchISR )();		

/* Points to the original routine installed on the vector we use to chain to the DOS tick.  This is then used to restore the original routine during prvExitFunction(). */
static void ( __interrupt __far *pxOldSwitchISRPlus1 )();	

/* Used to restore the original DOS context when the scheduler is ended. */
static jmp_buf xJumpBuf;

/*lint +e956 */

/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
pxISR pxOriginalTickISR;
	
	/* This is called with interrupts already disabled. */

	/* Remember what was on the interrupts we are going to use
	so we can put them back later if required. */
	pxOldSwitchISR = _dos_getvect( portSWITCH_INT_NUMBER );
	pxOriginalTickISR = _dos_getvect( portTIMER_INT_NUMBER );
	pxOldSwitchISRPlus1 = _dos_getvect( portSWITCH_INT_NUMBER + 1 );

	prvSetTickFrequency( configTICK_RATE_HZ );

	/* Put our manual switch (yield) function on a known
	vector. */
	_dos_setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );

	/* Put the old tick on a different interrupt number so we can
	call it when we want. */
	_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOriginalTickISR );

	#if configUSE_PREEMPTION == 1
	{		
		/* Put our tick switch function on the timer interrupt. */
		_dos_setvect( portTIMER_INT_NUMBER, prvPreemptiveTick );
	}
	#else
	{
		/* We want the timer interrupt to just increment the tick count. */
		_dos_setvect( portTIMER_INT_NUMBER, prvNonPreemptiveTick );
	}
	#endif

	/* Setup a counter that is used to call the DOS interrupt as close
	to it's original frequency as can be achieved given our chosen tick
	frequency. */
	sDOSTickCounter = portTICKS_PER_DOS_TICK;

	/* Clean up function if we want to return to DOS. */
	if( setjmp( xJumpBuf ) != 0 )
	{
		prvExitFunction();
		sSchedulerRunning = pdFALSE;
	}
	else
	{
		sSchedulerRunning = pdTRUE;

		/* Kick off the scheduler by setting up the context of the first task. */
		portFIRST_CONTEXT();
	}

	return sSchedulerRunning;
}
/*-----------------------------------------------------------*/

/* The tick ISR used depends on whether the preemptive or cooperative scheduler
is being used. */
#if configUSE_PREEMPTION == 1
	/* Tick service routine used by the scheduler when preemptive scheduling is
	being used. */
	static void __interrupt __far prvPreemptiveTick( void )
	{
		/* Get the scheduler to update the task states following the tick. */
		if( xTaskIncrementTick() != pdFALSE )
		{
			/* Switch in the context of the next task to be run. */
			portSWITCH_CONTEXT();
		}

		/* Reset the PIC ready for the next time. */
		prvPortResetPIC();
	}
#else
	static void __interrupt __far prvNonPreemptiveTick( void )
	{
		/* Same as preemptive tick, but the cooperative scheduler is being used
		so we don't have to switch in the context of the next task. */
		xTaskIncrementTick();
		prvPortResetPIC();
	}
#endif
/*-----------------------------------------------------------*/


static void __interrupt __far prvYieldProcessor( void )
{
	/* Switch in the context of the next task to be run. */
	portSWITCH_CONTEXT();
}
/*-----------------------------------------------------------*/

static void prvPortResetPIC( void )
{
	/* We are going to call the DOS tick interrupt at as close a
	frequency to the normal DOS tick as possible. */

	/* WE SHOULD NOT DO THIS IF YIELD WAS CALLED. */
	--sDOSTickCounter;
	if( sDOSTickCounter <= 0 )
	{
		sDOSTickCounter = ( int16_t ) portTICKS_PER_DOS_TICK;
		__asm{ int	portSWITCH_INT_NUMBER + 1 };		 
	}
	else
	{
		/* Reset the PIC as the DOS tick is not being called to
		do it. */
		__asm
		{
			mov	al, 20H
			out 20H, al
		};
	}
}
/*-----------------------------------------------------------*/

void vPortEndScheduler( void )
{
	/* Jump back to the processor state prior to starting the
	scheduler.  This means we are not going to be using a
	task stack frame so the task can be deleted. */
	longjmp( xJumpBuf, 1 );
}
/*-----------------------------------------------------------*/

static void prvExitFunction( void )
{
void ( __interrupt __far *pxOriginalTickISR )();

	/* Interrupts should be disabled here anyway - but no 
	harm in making sure. */
	portDISABLE_INTERRUPTS();
	if( sSchedulerRunning == pdTRUE )
	{
		/* Set the DOS tick back onto the timer ticker. */
		pxOriginalTickISR = _dos_getvect( portSWITCH_INT_NUMBER + 1 );
		_dos_setvect( portTIMER_INT_NUMBER, pxOriginalTickISR );
		prvSetTickFrequencyDefault();

		/* Put back the switch interrupt routines that was in place
		before the scheduler started. */
		_dos_setvect( portSWITCH_INT_NUMBER, pxOldSwitchISR );
		_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOldSwitchISRPlus1 );
	}
	/* The tick timer is back how DOS wants it.  We can re-enable
	interrupts without the scheduler being called. */
	portENABLE_INTERRUPTS();
}
/*-----------------------------------------------------------*/

static void prvSetTickFrequency( uint32_t ulTickRateHz )
{
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint32_t ulPIT_CONST = ( uint32_t ) 1193180;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;
uint32_t ulOutput;

	/* Setup the 8245 to tick at the wanted frequency. */
	portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
	ulOutput = ulPIT_CONST / ulTickRateHz;
   
	portOUTPUT_BYTE( usPIT0, ( uint16_t )( ulOutput & ( uint32_t ) 0xff ) );
	ulOutput >>= 8;
	portOUTPUT_BYTE( usPIT0, ( uint16_t ) ( ulOutput & ( uint32_t ) 0xff ) );
}
/*-----------------------------------------------------------*/

static void prvSetTickFrequencyDefault( void )
{
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;

	portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
	portOUTPUT_BYTE( usPIT0,0 );
	portOUTPUT_BYTE( usPIT0,0 );
}


/*lint +e950 */