/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 */

#ifndef PORTMACRO_H
    #define PORTMACRO_H

    #ifdef __cplusplus
        extern "C" {
    #endif

/* BSP includes. */
    #include <mb_interface.h>
    #include <xparameters.h>

/*-----------------------------------------------------------
 * Port specific definitions.
 *
 * The settings in this file configure FreeRTOS correctly for the
 * given hardware and compiler.
 *
 * These settings should not be altered.
 *-----------------------------------------------------------
 */

/* Type definitions. */
    #define portCHAR          char
    #define portFLOAT         float
    #define portDOUBLE        double
    #define portLONG          long
    #define portSHORT         short
    #define portSTACK_TYPE    uint32_t
    #define portBASE_TYPE     long

    typedef portSTACK_TYPE   StackType_t;
    typedef long             BaseType_t;
    typedef unsigned long    UBaseType_t;

    #if ( configUSE_16_BIT_TICKS == 1 )
        typedef uint16_t     TickType_t;
        #define portMAX_DELAY              ( TickType_t ) 0xffff
    #else
        typedef uint32_t     TickType_t;
        #define portMAX_DELAY              ( TickType_t ) 0xffffffffUL

/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
 * not need to be guarded with a critical section. */
        #define portTICK_TYPE_IS_ATOMIC    1
    #endif
/*-----------------------------------------------------------*/

/* Interrupt control macros and functions. */
    void microblaze_disable_interrupts( void );
    void microblaze_enable_interrupts( void );
    #define portDISABLE_INTERRUPTS()    microblaze_disable_interrupts()
    #define portENABLE_INTERRUPTS()     microblaze_enable_interrupts()
/*-----------------------------------------------------------*/

/* Critical section macros. */
    void vPortEnterCritical( void );
    void vPortExitCritical( void );
    #define portENTER_CRITICAL()                       \
    {                                                  \
        extern volatile UBaseType_t uxCriticalNesting; \
        microblaze_disable_interrupts();               \
        uxCriticalNesting++;                           \
    }

    #define portEXIT_CRITICAL()                        \
    {                                                  \
        extern volatile UBaseType_t uxCriticalNesting; \
        /* Interrupts are disabled, so we can */       \
        /* access the variable directly. */            \
        uxCriticalNesting--;                           \
        if( uxCriticalNesting == 0 )                   \
        {                                              \
            /* The nesting has unwound and we \
             * can enable interrupts again. */                              \
            portENABLE_INTERRUPTS();                                        \
        }                                                                   \
    }

/*-----------------------------------------------------------*/

/* The yield macro maps directly to the vPortYield() function. */
    void vPortYield( void );
    #define portYIELD()    vPortYield()

/* portYIELD_FROM_ISR() does not directly call vTaskSwitchContext(), but instead
 * sets a flag to say that a yield has been requested.  The interrupt exit code
 * then checks this flag, and calls vTaskSwitchContext() before restoring a task
 * context, if the flag is not false.  This is done to prevent multiple calls to
 * vTaskSwitchContext() being made from a single interrupt, as a single interrupt
 * can result in multiple peripherals being serviced. */
    extern volatile uint32_t ulTaskSwitchRequested;
    #define portYIELD_FROM_ISR( x )    if( ( x ) != pdFALSE ) ulTaskSwitchRequested                  = 1

    #if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 )

/* Generic helper function. */
        __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap )
        {
            uint8_t ucReturn;

            __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) );

            return ucReturn;
        }

/* Check the configuration. */
        #if ( configMAX_PRIORITIES > 32 )
            #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
        #endif

/* Store/clear the ready priorities in a bit map. */
        #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities )    ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
        #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities )     ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )

/*-----------------------------------------------------------*/

        #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities )    uxTopPriority        = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) )

    #endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */

/*-----------------------------------------------------------*/

/* Hardware specifics. */
    #define portBYTE_ALIGNMENT    4
    #define portSTACK_GROWTH      ( -1 )
    #define portTICK_PERIOD_MS    ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
    #define portNOP()    asm volatile ( "NOP" )
/*-----------------------------------------------------------*/

/* Task function macros as described on the FreeRTOS.org WEB site. */
    #define portTASK_FUNCTION_PROTO( vFunction, pvParameters )    void vFunction( void * pvParameters )
    #define portTASK_FUNCTION( vFunction, pvParameters )          void vFunction( void * pvParameters )
/*-----------------------------------------------------------*/

/* The following structure is used by the FreeRTOS exception handler.  It is
 * filled with the MicroBlaze context as it was at the time the exception occurred.
 * This is done as an aid to debugging exception occurrences. */
    typedef struct PORT_REGISTER_DUMP
    {
        /* The following structure members hold the values of the MicroBlaze
         * registers at the time the exception was raised. */
        uint32_t ulR1_SP;
        uint32_t ulR2_small_data_area;
        uint32_t ulR3;
        uint32_t ulR4;
        uint32_t ulR5;
        uint32_t ulR6;
        uint32_t ulR7;
        uint32_t ulR8;
        uint32_t ulR9;
        uint32_t ulR10;
        uint32_t ulR11;
        uint32_t ulR12;
        uint32_t ulR13_read_write_small_data_area;
        uint32_t ulR14_return_address_from_interrupt;
        uint32_t ulR15_return_address_from_subroutine;
        uint32_t ulR16_return_address_from_trap;
        uint32_t ulR17_return_address_from_exceptions; /* The exception entry code will copy the BTR into R17 if the exception occurred in the delay slot of a branch instruction. */
        uint32_t ulR18;
        uint32_t ulR19;
        uint32_t ulR20;
        uint32_t ulR21;
        uint32_t ulR22;
        uint32_t ulR23;
        uint32_t ulR24;
        uint32_t ulR25;
        uint32_t ulR26;
        uint32_t ulR27;
        uint32_t ulR28;
        uint32_t ulR29;
        uint32_t ulR30;
        uint32_t ulR31;
        uint32_t ulPC;
        uint32_t ulESR;
        uint32_t ulMSR;
        uint32_t ulEAR;
        uint32_t ulFSR;
        uint32_t ulEDR;

        /* A human readable description of the exception cause.  The strings used
         * are the same as the #define constant names found in the
         * microblaze_exceptions_i.h header file */
        int8_t * pcExceptionCause;

        /* The human readable name of the task that was running at the time the
         * exception occurred.  This is the name that was given to the task when the
         * task was created using the FreeRTOS xTaskCreate() API function. */
        char * pcCurrentTaskName;

        /* The handle of the task that was running a the time the exception
         * occurred. */
        void * xCurrentTaskHandle;
    } xPortRegisterDump;


/*
 * Installs pxHandler as the interrupt handler for the peripheral specified by
 * the ucInterruptID parameter.
 *
 * ucInterruptID:
 *
 * The ID of the peripheral that will have pxHandler assigned as its interrupt
 * handler.  Peripheral IDs are defined in the xparameters.h header file, which
 * is itself part of the BSP project.  For example, in the official demo
 * application for this port, xparameters.h defines the following IDs for the
 * four possible interrupt sources:
 *
 * XPAR_INTC_0_UARTLITE_1_VEC_ID  -  for the UARTlite peripheral.
 * XPAR_INTC_0_TMRCTR_0_VEC_ID    -  for the AXI Timer 0 peripheral.
 * XPAR_INTC_0_EMACLITE_0_VEC_ID  -  for the Ethernet lite peripheral.
 * XPAR_INTC_0_GPIO_1_VEC_ID      -  for the button inputs.
 *
 *
 * pxHandler:
 *
 * A pointer to the interrupt handler function itself.  This must be a void
 * function that takes a (void *) parameter.
 *
 *
 * pvCallBackRef:
 *
 * The parameter passed into the handler function.  In many cases this will not
 * be used and can be NULL.  Some times it is used to pass in a reference to
 * the peripheral instance variable, so it can be accessed from inside the
 * handler function.
 *
 *
 * pdPASS is returned if the function executes successfully.  Any other value
 * being returned indicates that the function did not execute correctly.
 */
    BaseType_t xPortInstallInterruptHandler( uint8_t ucInterruptID,
                                             XInterruptHandler pxHandler,
                                             void * pvCallBackRef );


/*
 * Enables the interrupt, within the interrupt controller, for the peripheral
 * specified by the ucInterruptID parameter.
 *
 * ucInterruptID:
 *
 * The ID of the peripheral that will have its interrupt enabled in the
 * interrupt controller.  Peripheral IDs are defined in the xparameters.h header
 * file, which is itself part of the BSP project.  For example, in the official
 * demo application for this port, xparameters.h defines the following IDs for
 * the four possible interrupt sources:
 *
 * XPAR_INTC_0_UARTLITE_1_VEC_ID  -  for the UARTlite peripheral.
 * XPAR_INTC_0_TMRCTR_0_VEC_ID    -  for the AXI Timer 0 peripheral.
 * XPAR_INTC_0_EMACLITE_0_VEC_ID  -  for the Ethernet lite peripheral.
 * XPAR_INTC_0_GPIO_1_VEC_ID      -  for the button inputs.
 *
 */
    void vPortEnableInterrupt( uint8_t ucInterruptID );

/*
 * Disables the interrupt, within the interrupt controller, for the peripheral
 * specified by the ucInterruptID parameter.
 *
 * ucInterruptID:
 *
 * The ID of the peripheral that will have its interrupt disabled in the
 * interrupt controller.  Peripheral IDs are defined in the xparameters.h header
 * file, which is itself part of the BSP project.  For example, in the official
 * demo application for this port, xparameters.h defines the following IDs for
 * the four possible interrupt sources:
 *
 * XPAR_INTC_0_UARTLITE_1_VEC_ID  -  for the UARTlite peripheral.
 * XPAR_INTC_0_TMRCTR_0_VEC_ID    -  for the AXI Timer 0 peripheral.
 * XPAR_INTC_0_EMACLITE_0_VEC_ID  -  for the Ethernet lite peripheral.
 * XPAR_INTC_0_GPIO_1_VEC_ID      -  for the button inputs.
 *
 */
    void vPortDisableInterrupt( uint8_t ucInterruptID );

/*
 * This is an application defined callback function used to install the tick
 * interrupt handler.  It is provided as an application callback because the
 * kernel will run on lots of different MicroBlaze and FPGA configurations - not
 * all of which will have the same timer peripherals defined or available.  This
 * example uses the AXI Timer 0.  If that is available on your hardware platform
 * then this example callback implementation should not require modification.
 * The name of the interrupt handler that should be installed is vPortTickISR(),
 * which the function below declares as an extern.
 */
    void vApplicationSetupTimerInterrupt( void );

/*
 * This is an application defined callback function used to clear whichever
 * interrupt was installed by the the vApplicationSetupTimerInterrupt() callback
 * function - in this case the interrupt generated by the AXI timer.  It is
 * provided as an application callback because the kernel will run on lots of
 * different MicroBlaze and FPGA configurations - not all of which will have the
 * same timer peripherals defined or available.  This example uses the AXI Timer 0.
 * If that is available on your hardware platform then this example callback
 * implementation should not require modification provided the example definition
 * of vApplicationSetupTimerInterrupt() is also not modified.
 */
    void vApplicationClearTimerInterrupt( void );

/*
 * vPortExceptionsInstallHandlers() is only available when the MicroBlaze
 * is configured to include exception functionality, and
 * configINSTALL_EXCEPTION_HANDLERS is set to 1 in FreeRTOSConfig.h.
 *
 * vPortExceptionsInstallHandlers() installs the FreeRTOS exception handler
 * for every possible exception cause.
 *
 * vPortExceptionsInstallHandlers() can be called explicitly from application
 * code.  After that is done, the default FreeRTOS exception handler that will
 * have been installed can be replaced for any specific exception cause by using
 * the standard Xilinx library function microblaze_register_exception_handler().
 *
 * If vPortExceptionsInstallHandlers() is not called explicitly by the
 * application, it will be called automatically by the kernel the first time
 * xPortInstallInterruptHandler() is called.  At that time, any exception
 * handlers that may have already been installed will be replaced.
 *
 * See the description of vApplicationExceptionRegisterDump() for information
 * on the processing performed by the FreeRTOS exception handler.
 */
    void vPortExceptionsInstallHandlers( void );

/*
 * The FreeRTOS exception handler fills an xPortRegisterDump structure (defined
 * in portmacro.h) with the MicroBlaze context, as it was at the time the
 * exception occurred.  The exception handler then calls
 * vApplicationExceptionRegisterDump(), passing in the completed
 * xPortRegisterDump structure as its parameter.
 *
 * The FreeRTOS kernel provides its own implementation of
 * vApplicationExceptionRegisterDump(), but the kernel provided implementation
 * is declared as being 'weak'.  The weak definition allows the application
 * writer to provide their own implementation, should they wish to use the
 * register dump information.  For example, an implementation could be provided
 * that wrote the register dump data to a display, or a UART port.
 */
    void vApplicationExceptionRegisterDump( xPortRegisterDump * xRegisterDump );


    #ifdef __cplusplus
        }
    #endif

#endif /* PORTMACRO_H */