/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 */

#include "FreeRTOSConfig.h"

#define portCONTEXT_SIZE             132
#define portEPC_STACK_LOCATION       124
#define portSTATUS_STACK_LOCATION    128

/******************************************************************/
.macro portSAVE_CONTEXT

/* Make room for the context. First save the current status so it can be
 * manipulated, and the cause and EPC registers so their original values are
 * captured. */
mfc0 k0, _CP0_CAUSE
addiu sp, sp, -portCONTEXT_SIZE
mfc0 k1, _CP0_STATUS

/* Also save s6 and s5 so they can be used.  Any nesting interrupts should
 * maintain the values of these registers across the ISR. */
sw s6, 44 ( sp )
sw s5, 40 ( sp )
sw k1, portSTATUS_STACK_LOCATION( sp )

/* Prepare to enable interrupts above the current priority. */
srl k0, k0, 0xa
ins k1, k0, 10, 6
ins k1, zero, 1, 4

/* s5 is used as the frame pointer. */
add s5, zero, sp

/* Check the nesting count value. */
la k0, uxInterruptNesting
lw s6, ( k0 )

/* If the nesting count is 0 then swap to the the system stack, otherwise
 * the system stack is already being used. */
bne s6, zero, 1f
nop

/* Swap to the system stack. */
la sp, xISRStackTop
lw sp, ( sp )

/* Increment and save the nesting count. */
1 :  addiu s6, s6, 1
sw s6, 0 ( k0 )

/* s6 holds the EPC value, this is saved after interrupts are re-enabled. */
mfc0 s6, _CP0_EPC

/* Re-enable interrupts. */
mtc0 k1, _CP0_STATUS

/* Save the context into the space just created.  s6 is saved again
 * here as it now contains the EPC value.  No other s registers need be
 * saved. */
sw ra, 120 ( s5 )
sw s8, 116 ( s5 )
sw t9, 112 ( s5 )
sw t8, 108 ( s5 )
sw t7, 104 ( s5 )
sw t6, 100 ( s5 )
sw t5, 96 ( s5 )
sw t4, 92 ( s5 )
sw t3, 88 ( s5 )
sw t2, 84 ( s5 )
sw t1, 80 ( s5 )
sw t0, 76 ( s5 )
sw a3, 72 ( s5 )
sw a2, 68 ( s5 )
sw a1, 64 ( s5 )
sw a0, 60 ( s5 )
sw v1, 56 ( s5 )
sw v0, 52 ( s5 )
sw s6, portEPC_STACK_LOCATION( s5 )
sw $1, 16 ( s5 )

/* s6 is used as a scratch register. */
mfhi s6
sw s6, 12 ( s5 )
mflo s6
sw s6, 8 ( s5 )

/* Update the task stack pointer value if nesting is zero. */
la s6, uxInterruptNesting
lw s6, ( s6 )
addiu s6, s6, -1
bne s6, zero, 1f
nop

/* Save the stack pointer. */
la s6, uxSavedTaskStackPointer
sw s5, ( s6 )
1 :
.endm

/******************************************************************/
   .macro portRESTORE_CONTEXT

/* Restore the stack pointer from the TCB.  This is only done if the
 * nesting count is 1. */
la s6, uxInterruptNesting
lw s6, ( s6 )
addiu s6, s6, -1
bne s6, zero, 1f
nop
la s6, uxSavedTaskStackPointer
lw s5, ( s6 )

/* Restore the context. */
1 :  lw s6, 8 ( s5 )
mtlo s6
lw s6, 12 ( s5 )
mthi s6
lw $1, 16 ( s5 )

/* s6 is loaded as it was used as a scratch register and therefore saved
 * as part of the interrupt context. */
lw s6, 44 ( s5 )
lw v0, 52 ( s5 )
lw v1, 56 ( s5 )
lw a0, 60 ( s5 )
lw a1, 64 ( s5 )
lw a2, 68 ( s5 )
lw a3, 72 ( s5 )
lw t0, 76 ( s5 )
lw t1, 80 ( s5 )
lw t2, 84 ( s5 )
lw t3, 88 ( s5 )
lw t4, 92 ( s5 )
lw t5, 96 ( s5 )
lw t6, 100 ( s5 )
lw t7, 104 ( s5 )
lw t8, 108 ( s5 )
lw t9, 112 ( s5 )
lw s8, 116 ( s5 )
lw ra, 120 ( s5 )

/* Protect access to the k registers, and others. */
di
ehb

/* Decrement the nesting count. */
la k0, uxInterruptNesting
lw k1, ( k0 )
addiu k1, k1, -1
sw k1, 0 ( k0 )

lw k0, portSTATUS_STACK_LOCATION( s5 )
lw k1, portEPC_STACK_LOCATION( s5 )

/* Leave the stack in its original state.  First load sp from s5, then
 * restore s5 from the stack. */
add sp, zero, s5
lw s5, 40 ( sp )
addiu sp, sp, portCONTEXT_SIZE

mtc0 k0, _CP0_STATUS
mtc0 k1, _CP0_EPC
ehb
eret
nop

   .endm