/*
    FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.

    ***************************************************************************
    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<
    ***************************************************************************

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
    the FAQ page "My application does not run, what could be wrong?".  Have you
    defined configASSERT()?

    http://www.FreeRTOS.org/support - In return for receiving this top quality
    embedded software for free we request you assist our global community by
    participating in the support forum.

    http://www.FreeRTOS.org/training - Investing in training allows your team to
    be as productive as possible as early as possible.  Now you can receive
    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
    Ltd, and the world's leading authority on the world's leading RTOS.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

/*
 * This file contains the non-portable and therefore RZ/T specific parts of
 * the IntQueue standard demo task - namely the configuration of the timers
 * that generate the interrupts and the interrupt entry points.
 */

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/* Demo includes. */
#include "IntQueueTimer.h"
#include "IntQueue.h"

/* Renesas includes. */
#include "r_cg_macrodriver.h"
#include "r_cg_cmt.h"
#include "r_reset.h"

#define tmrCMT_1_CHANNEL_0_HZ	( 4000UL )
#define tmrCMT_1_CHANNEL_1_HZ	( 2011UL )

/*
 * Handlers for the two timers used.  See the documentation page
 * for this port on TBD for more information on writing
 * interrupt handlers.
 */
void vCMT_1_Channel_0_ISR( void );
void vCMT_1_Channel_1_ISR( void );

/*
 * Entry point for the handlers.  These set the pxISRFunction variable to point
 * to the C handler for each timer, then branch to the FreeRTOS IRQ handler.
 */
#ifdef __GNUC__
	static void vCMT_1_Channel_0_ISR_Entry( void ) __attribute__((naked));
	static void vCMT_1_Channel_1_ISR_Entry( void ) __attribute__((naked));
#endif /* __GNUC__ */
#ifdef __ICCARM__
	/* IAR requires the entry point to be in an assembly file.  The functions
	are	implemented in $PROJ_DIR$/System/IAR/Interrupt_Entry_Stubs.asm. */
	extern void vCMT_1_Channel_0_ISR_Entry( void );
	extern void vCMT_1_Channel_1_ISR_Entry( void );
#endif /* __ICCARM__ */
/*-----------------------------------------------------------*/

void vInitialiseTimerForIntQueueTest( void )
{
uint32_t ulCompareMatchValue;
const uint32_t ulPeripheralClockDivider = 6UL, ulCMTClockDivider = 8UL;

	/* Disable CMI2 and CMI3 interrupts. */
	VIC.IEC0.LONG = ( 1UL << 23UL ) | ( 1UL << 24UL );

	/* Cancel CMT stop state in LPC. */
	r_rst_write_enable();
	MSTP( CMT1 ) = 0U;
	r_rst_write_disable();

	/* Interrupt on compare match. */
	CMT2.CMCR.BIT.CMIE = 1;
	CMT3.CMCR.BIT.CMIE = 1;

	/* Calculate the compare match value. */
	ulCompareMatchValue = configCPU_CLOCK_HZ / ulPeripheralClockDivider;
	ulCompareMatchValue /= ulCMTClockDivider;
	ulCompareMatchValue /= tmrCMT_1_CHANNEL_0_HZ;
	ulCompareMatchValue -= 1UL;
	CMT2.CMCOR = ( unsigned short ) ulCompareMatchValue;

	ulCompareMatchValue = configCPU_CLOCK_HZ / ulPeripheralClockDivider;
	ulCompareMatchValue /= ulCMTClockDivider;
	ulCompareMatchValue /= tmrCMT_1_CHANNEL_1_HZ;
	ulCompareMatchValue -= 1UL;
	CMT3.CMCOR = ( unsigned short ) ulCompareMatchValue;

	/* Divide the PCLK by 8. */
	CMT2.CMCR.BIT.CKS = 0;
	CMT3.CMCR.BIT.CKS = 0;

	/* Clear count to 0. */
	CMT2.CMCNT = 0;
	CMT3.CMCNT = 0;

	/* Set CMI2 and CMI3 edge detection type. */
	VIC.PLS0.LONG |= ( 1UL << 23UL ) | ( 1UL << 24UL );

	/* Set CMI2 and CMI3 priority levels so they nest. */
	VIC.PRL23.LONG = _CMT_PRIORITY_LEVEL2;
	VIC.PRL24.LONG = _CMT_PRIORITY_LEVEL9;

	/* Set CMI2 and CMI3 interrupt address. */
	VIC.VAD23.LONG = ( uint32_t ) vCMT_1_Channel_0_ISR_Entry;
	VIC.VAD24.LONG = ( uint32_t ) vCMT_1_Channel_1_ISR_Entry;

    /* Enable CMI2 and CMI3 interrupts in ICU. */
	VIC.IEN0.LONG |= ( 1UL << 23UL ) | ( 1UL << 24UL );

    /* Start CMT1 channel 0 and 1 count. */
    CMT.CMSTR1.BIT.STR2 = 1U;
	CMT.CMSTR1.BIT.STR3 = 1U;
}
/*-----------------------------------------------------------*/

void vCMT_1_Channel_0_ISR( void )
{
	/* Clear the interrupt. */
	VIC.PIC0.LONG = ( 1UL << 23UL );

	/* Call the handler that is part of the common code - this is where the
	non-portable code ends and the actual test is performed. */
	portYIELD_FROM_ISR( xFirstTimerHandler() );
}
/*-----------------------------------------------------------*/

void vCMT_1_Channel_1_ISR( void )
{
	/* Clear the interrupt. */
	VIC.PIC0.LONG = ( 1UL << 24UL );

	/* Call the handler that is part of the common code - this is where the
	non-portable code ends and the actual test is performed. */
	portYIELD_FROM_ISR( xSecondTimerHandler() );
}
/*-----------------------------------------------------------*/

/*
 * The RZ/T vectors directly to a peripheral specific interrupt handler, rather
 * than using the Cortex-R IRQ vector.  Therefore each interrupt handler
 * installed by the application must follow the examples below, which save a
 * pointer to a standard C function in the pxISRFunction variable, before
 * branching to the FreeRTOS IRQ handler.  The FreeRTOS IRQ handler then manages
 * interrupt entry (including interrupt nesting), before calling the C function
 * saved in the pxISRFunction variable.  NOTE:  The entry points are naked
 * functions - do not add C code to these functions.
 *
 * See http://www.freertos.org/Renesas_RZ-T_Cortex-R4F-RTOS.html
 */
#ifdef __GNUC__
	/* The IAR equivalent is implemented in
	$PROJ_DIR$/System/IAR/Interrupt_Entry_Stubs.asm */
	static void vCMT_1_Channel_0_ISR_Entry( void )
	{
		__asm volatile (
							"PUSH	{r0-r1}								\t\n"
							"LDR	r0, =pxISRFunction					\t\n"
							"LDR	r1, =vCMT_1_Channel_0_ISR			\t\n"
							"STR	r1, [r0]							\t\n"
							"POP	{r0-r1}								\t\n"
							"B		FreeRTOS_IRQ_Handler					"
						);
	}
#endif /* __GNUC__ */
/*-----------------------------------------------------------*/

#ifdef __GNUC__
	/* The IAR equivalent is implemented in
	$PROJ_DIR$/System/IAR/Interrupt_Entry_Stubs.asm */
	static void vCMT_1_Channel_1_ISR_Entry( void )
	{
		__asm volatile (
							"PUSH	{r0-r1}								\t\n"
							"LDR	r0, =pxISRFunction					\t\n"
							"LDR	r1, =vCMT_1_Channel_1_ISR			\t\n"
							"STR	r1, [r0]							\t\n"
							"POP	{r0-r1}								\t\n"
							"B		FreeRTOS_IRQ_Handler					"
						);
	}
#endif /* __GNUC__ */