/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

#ifndef PORTMACRO_H
#define PORTMACRO_H

#include <Windows.h>
#include <WinBase.h>

/******************************************************************************
	Defines
******************************************************************************/
/* Type definitions. */
#define portCHAR		char
#define portFLOAT		float
#define portDOUBLE		double
#define portLONG		long
#define portSHORT		short
#define portSTACK_TYPE	size_t
#define portBASE_TYPE	long
#define portPOINTER_SIZE_TYPE size_t

typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;


#if( configUSE_16_BIT_TICKS == 1 )
    typedef uint16_t TickType_t;
    #define portMAX_DELAY ( TickType_t ) 0xffff
#else
    typedef uint32_t TickType_t;
    #define portMAX_DELAY ( TickType_t ) 0xffffffffUL

	/* 32/64-bit tick type on a 32/64-bit architecture, so reads of the tick
	count do not need to be guarded with a critical section. */
	#define portTICK_TYPE_IS_ATOMIC 1
#endif

/* Hardware specifics. */
#define portSTACK_GROWTH			( -1 )
#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portINLINE __inline

#if defined( __x86_64__) || defined( _M_X64 )
	#define portBYTE_ALIGNMENT		8
#else
	#define portBYTE_ALIGNMENT		4
#endif

#define portYIELD()					vPortGenerateSimulatedInterrupt( portINTERRUPT_YIELD )


extern volatile BaseType_t xInsideInterrupt;
#define portSOFTWARE_BARRIER() while( xInsideInterrupt != pdFALSE )


/* Simulated interrupts return pdFALSE if no context switch should be performed,
or a non-zero number if a context switch should be performed. */
#define portYIELD_FROM_ISR( x ) ( void ) x
#define portEND_SWITCHING_ISR( x ) portYIELD_FROM_ISR( ( x ) )

void vPortCloseRunningThread( void *pvTaskToDelete, volatile BaseType_t *pxPendYield );
void vPortDeleteThread( void *pvThreadToDelete );
#define portCLEAN_UP_TCB( pxTCB )	vPortDeleteThread( pxTCB )
#define portPRE_TASK_DELETE_HOOK( pvTaskToDelete, pxPendYield ) vPortCloseRunningThread( ( pvTaskToDelete ), ( pxPendYield ) )
#define portDISABLE_INTERRUPTS() vPortEnterCritical()
#define portENABLE_INTERRUPTS() vPortExitCritical()

/* Critical section handling. */
void vPortEnterCritical( void );
void vPortExitCritical( void );

#define portENTER_CRITICAL()		vPortEnterCritical()
#define portEXIT_CRITICAL()			vPortExitCritical()

#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
	#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif

#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1

	/* Check the configuration. */
	#if( configMAX_PRIORITIES > 32 )
		#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
	#endif

	/* Store/clear the ready priorities in a bit map. */
	#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
	#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )


	/*-----------------------------------------------------------*/

	#ifdef __GNUC__
		#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities )	\
			__asm volatile(	"bsr %1, %0\n\t" 									\
							:"=r"(uxTopPriority) : "rm"(uxReadyPriorities) : "cc" )
	#else
		/* BitScanReverse returns the bit position of the most significant '1'
		in the word. */
		#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) _BitScanReverse( ( DWORD * ) &( uxTopPriority ), ( uxReadyPriorities ) )
	#endif /* __GNUC__ */

#endif /* taskRECORD_READY_PRIORITY */

#ifndef __GNUC__
	__pragma( warning( disable:4211 ) ) /* Nonstandard extension used, as extern is only nonstandard to MSVC. */
#endif


/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )

#define portINTERRUPT_YIELD				( 0UL )
#define portINTERRUPT_TICK				( 1UL )

/*
 * Raise a simulated interrupt represented by the bit mask in ulInterruptMask.
 * Each bit can be used to represent an individual interrupt - with the first
 * two bits being used for the Yield and Tick interrupts respectively.
*/
void vPortGenerateSimulatedInterrupt( uint32_t ulInterruptNumber );

/*
 * Install an interrupt handler to be called by the simulated interrupt handler
 * thread.  The interrupt number must be above any used by the kernel itself
 * (at the time of writing the kernel was using interrupt numbers 0, 1, and 2
 * as defined above).  The number must also be lower than 32.
 *
 * Interrupt handler functions must return a non-zero value if executing the
 * handler resulted in a task switch being required.
 */
void vPortSetInterruptHandler( uint32_t ulInterruptNumber, uint32_t (*pvHandler)( void ) );

#endif