/*
	FreeRTOS V5.4.0 - Copyright (C) 2003-2009 Richard Barry.

	This file is part of the FreeRTOS distribution.

	FreeRTOS is free software; you can redistribute it and/or modify it	under 
	the terms of the GNU General Public License (version 2) as published by the 
	Free Software Foundation and modified by the FreeRTOS exception.
	**NOTE** The exception to the GPL is included to allow you to distribute a
	combined work that includes FreeRTOS without being obliged to provide the 
	source code for proprietary components outside of the FreeRTOS kernel.  
	Alternative commercial license and support terms are also available upon 
	request.  See the licensing section of http://www.FreeRTOS.org for full 
	license details.

	FreeRTOS is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
	more details.

	You should have received a copy of the GNU General Public License along
	with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.


	***************************************************************************
	*                                                                         *
	* Looking for a quick start?  Then check out the FreeRTOS eBook!          *
	* See http://www.FreeRTOS.org/Documentation for details                   *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/

typedef void tskTCB;
extern volatile tskTCB * volatile pxCurrentTCB;
extern void vTaskSwitchContext( void );

/* 
 * Saves the stack pointer for one task into its TCB, calls 
 * vTaskSwitchContext() to update the TCB being used, then restores the stack 
 * from the new TCB read to run the task. 
 */
void portSWITCH_CONTEXT( void );

/*
 * Load the stack pointer from the TCB of the task which is going to be first
 * to execute.  Then force an IRET so the registers and IP are popped off the
 * stack.
 */
void portFIRST_CONTEXT( void );

/* There are slightly different versions depending on whether you are building
to include debugger information.  If debugger information is used then there
are a couple of extra bytes left of the ISR stack (presumably for use by the
debugger).  The true stack pointer is then stored in the bp register.  We add
2 to the stack pointer to remove the extra bytes before we restore our context. */

#ifdef DEBUG_BUILD

	#pragma aux portSWITCH_CONTEXT =	"mov	ax, seg pxCurrentTCB"														\
										"mov	ds, ax"																		\
										"les	bx, pxCurrentTCB"			/* Save the stack pointer into the TCB. */		\
										"mov	es:0x2[ bx ], ss"															\
										"mov	es:[ bx ], sp"																\
										"call	vTaskSwitchContext"			/* Perform the switch. */						\
										"mov	ax, seg pxCurrentTCB"		/* Restore the stack pointer from the TCB. */	\
										"mov	ds, ax"																		\
										"les	bx, dword ptr pxCurrentTCB"													\
										"mov	ss, es:[ bx + 2 ]"															\
										"mov	sp, es:[ bx ]"																\
										"mov	bp, sp"						/* Prepair the bp register for the restoration of the SP in the compiler generated portion of the ISR */	\
										"add	bp, 0x0002"

										

	#pragma aux portFIRST_CONTEXT =		"mov	ax, seg pxCurrentTCB"			\
										"mov	ds, ax"							\
										"les	bx, dword ptr pxCurrentTCB"		\
										"mov	ss, es:[ bx + 2 ]"				\
										"mov	sp, es:[ bx ]"					\
										"add	sp, 0x0002"						/* Remove the extra bytes that exist in debug builds before restoring the context. */ \
										"pop	ax"								\
										"pop	ax"								\
										"pop	es"								\
										"pop	ds"								\
										"popa"									\
										"iret"									
#else

	#pragma aux portSWITCH_CONTEXT =	"mov	ax, seg pxCurrentTCB"														\
										"mov	ds, ax"																		\
										"les	bx, pxCurrentTCB"			/* Save the stack pointer into the TCB. */		\
										"mov	es:0x2[ bx ], ss"															\
										"mov	es:[ bx ], sp"																\
										"call	vTaskSwitchContext"			/* Perform the switch. */						\
										"mov	ax, seg pxCurrentTCB"		/* Restore the stack pointer from the TCB. */	\
										"mov	ds, ax"																		\
										"les	bx, dword ptr pxCurrentTCB"													\
										"mov	ss, es:[ bx + 2 ]"															\
										"mov	sp, es:[ bx ]"
										

	#pragma aux portFIRST_CONTEXT =		"mov	ax, seg pxCurrentTCB"			\
										"mov	ds, ax"							\
										"les	bx, dword ptr pxCurrentTCB"		\
										"mov	ss, es:[ bx + 2 ]"				\
										"mov	sp, es:[ bx ]"					\
										"pop	ax"								\
										"pop	ax"								\
										"pop	es"								\
										"pop	ds"								\
										"popa"									\
										"iret"									
#endif