diff --git a/croutine.c b/croutine.c
index 6152067..6b1b08f 100644
--- a/croutine.c
+++ b/croutine.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #include "FreeRTOS.h"
@@ -202,7 +201,7 @@
     {
         /* Are there any co-routines waiting to get moved to the ready list?  These
          * are co-routines that have been readied by an ISR.  The ISR cannot access
-         * the	ready lists itself. */
+         * the ready lists itself. */
         while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE )
         {
             CRCB_t * pxUnblockedCRCB;
@@ -306,7 +305,7 @@
             }
 
             /* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines
-             * of the	same priority get an equal share of the processor time. */
+             * of the same priority get an equal share of the processor time. */
             listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) );
 
             /* Call the co-routine. */
diff --git a/event_groups.c b/event_groups.c
index 40fc429..fa5f920 100644
--- a/event_groups.c
+++ b/event_groups.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Standard includes. */
diff --git a/include/FreeRTOS.h b/include/FreeRTOS.h
index 8521876..a18e093 100644
--- a/include/FreeRTOS.h
+++ b/include/FreeRTOS.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef INC_FREERTOS_H
diff --git a/include/StackMacros.h b/include/StackMacros.h
index c9a0a05..7e2f532 100644
--- a/include/StackMacros.h
+++ b/include/StackMacros.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef STACK_MACROS_H
diff --git a/include/atomic.h b/include/atomic.h
index 982bc2a..662d867 100644
--- a/include/atomic.h
+++ b/include/atomic.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /**
diff --git a/include/croutine.h b/include/croutine.h
index 83f0d98..76c805b 100644
--- a/include/croutine.h
+++ b/include/croutine.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef CO_ROUTINE_H
diff --git a/include/deprecated_definitions.h b/include/deprecated_definitions.h
index aa2c6cc..456f6fd 100644
--- a/include/deprecated_definitions.h
+++ b/include/deprecated_definitions.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef DEPRECATED_DEFINITIONS_H
diff --git a/include/event_groups.h b/include/event_groups.h
index c9ab819..147fbe4 100644
--- a/include/event_groups.h
+++ b/include/event_groups.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef EVENT_GROUPS_H
@@ -253,8 +252,8 @@
  *
  * Example usage:
  * <pre>
- #define BIT_0	( 1 << 0 )
- #define BIT_4	( 1 << 4 )
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
  *
  * void aFunction( EventGroupHandle_t xEventGroup )
  * {
@@ -264,11 +263,11 @@
  *      // Wait a maximum of 100ms for either bit 0 or bit 4 to be set within
  *      // the event group.  Clear the bits before exiting.
  *      uxBits = xEventGroupWaitBits(
- *                  xEventGroup,	// The event group being tested.
- *                  BIT_0 | BIT_4,	// The bits within the event group to wait for.
- *                  pdTRUE,			// BIT_0 and BIT_4 should be cleared before returning.
- *                  pdFALSE,		// Don't wait for both bits, either bit will do.
- *                  xTicksToWait );	// Wait a maximum of 100ms for either bit to be set.
+ *                  xEventGroup,    // The event group being tested.
+ *                  BIT_0 | BIT_4,  // The bits within the event group to wait for.
+ *                  pdTRUE,         // BIT_0 and BIT_4 should be cleared before returning.
+ *                  pdFALSE,        // Don't wait for both bits, either bit will do.
+ *                  xTicksToWait ); // Wait a maximum of 100ms for either bit to be set.
  *
  *      if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
  *      {
@@ -317,8 +316,8 @@
  *
  * Example usage:
  * <pre>
- #define BIT_0	( 1 << 0 )
- #define BIT_4	( 1 << 4 )
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
  *
  * void aFunction( EventGroupHandle_t xEventGroup )
  * {
@@ -326,7 +325,7 @@
  *
  *      // Clear bit 0 and bit 4 in xEventGroup.
  *      uxBits = xEventGroupClearBits(
- *                              xEventGroup,	// The event group being updated.
+ *                              xEventGroup,    // The event group being updated.
  *                              BIT_0 | BIT_4 );// The bits being cleared.
  *
  *      if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
@@ -386,8 +385,8 @@
  *
  * Example usage:
  * <pre>
- #define BIT_0	( 1 << 0 )
- #define BIT_4	( 1 << 4 )
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
  *
  * // An event group which it is assumed has already been created by a call to
  * // xEventGroupCreate().
@@ -397,7 +396,7 @@
  * {
  *      // Clear bit 0 and bit 4 in xEventGroup.
  *      xResult = xEventGroupClearBitsFromISR(
- *                          xEventGroup,	 // The event group being updated.
+ *                          xEventGroup,     // The event group being updated.
  *                          BIT_0 | BIT_4 ); // The bits being set.
  *
  *      if( xResult == pdPASS )
@@ -447,8 +446,8 @@
  *
  * Example usage:
  * <pre>
- #define BIT_0	( 1 << 0 )
- #define BIT_4	( 1 << 4 )
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
  *
  * void aFunction( EventGroupHandle_t xEventGroup )
  * {
@@ -456,7 +455,7 @@
  *
  *      // Set bit 0 and bit 4 in xEventGroup.
  *      uxBits = xEventGroupSetBits(
- *                          xEventGroup,	// The event group being updated.
+ *                          xEventGroup,    // The event group being updated.
  *                          BIT_0 | BIT_4 );// The bits being set.
  *
  *      if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
@@ -529,8 +528,8 @@
  *
  * Example usage:
  * <pre>
- #define BIT_0	( 1 << 0 )
- #define BIT_4	( 1 << 4 )
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
  *
  * // An event group which it is assumed has already been created by a call to
  * // xEventGroupCreate().
@@ -545,7 +544,7 @@
  *
  *      // Set bit 0 and bit 4 in xEventGroup.
  *      xResult = xEventGroupSetBitsFromISR(
- *                          xEventGroup,	// The event group being updated.
+ *                          xEventGroup,    // The event group being updated.
  *                          BIT_0 | BIT_4   // The bits being set.
  *                          &xHigherPriorityTaskWoken );
  *
@@ -574,7 +573,7 @@
 /**
  * event_groups.h
  *<pre>
- *  EventBits_t xEventGroupSync(	EventGroupHandle_t xEventGroup,
+ *  EventBits_t xEventGroupSync(    EventGroupHandle_t xEventGroup,
  *                                  const EventBits_t uxBitsToSet,
  *                                  const EventBits_t uxBitsToWaitFor,
  *                                  TickType_t xTicksToWait );
@@ -619,9 +618,9 @@
  * Example usage:
  * <pre>
  * // Bits used by the three tasks.
- #define TASK_0_BIT		( 1 << 0 )
- #define TASK_1_BIT		( 1 << 1 )
- #define TASK_2_BIT		( 1 << 2 )
+ #define TASK_0_BIT    ( 1 << 0 )
+ #define TASK_1_BIT    ( 1 << 1 )
+ #define TASK_2_BIT    ( 1 << 2 )
  *
  #define ALL_SYNC_BITS ( TASK_0_BIT | TASK_1_BIT | TASK_2_BIT )
  *
diff --git a/include/list.h b/include/list.h
index 9a23a82..7f80574 100644
--- a/include/list.h
+++ b/include/list.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*
diff --git a/include/message_buffer.h b/include/message_buffer.h
index 71dc691..53a1d71 100644
--- a/include/message_buffer.h
+++ b/include/message_buffer.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
diff --git a/include/mpu_prototypes.h b/include/mpu_prototypes.h
index 476850a..5f64fa8 100644
--- a/include/mpu_prototypes.h
+++ b/include/mpu_prototypes.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*
diff --git a/include/mpu_wrappers.h b/include/mpu_wrappers.h
index 89e47aa..ca2ebe6 100644
--- a/include/mpu_wrappers.h
+++ b/include/mpu_wrappers.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef MPU_WRAPPERS_H
diff --git a/include/portable.h b/include/portable.h
index 4996424..4c1b5de 100644
--- a/include/portable.h
+++ b/include/portable.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/include/projdefs.h b/include/projdefs.h
index d421633..0abd64f 100644
--- a/include/projdefs.h
+++ b/include/projdefs.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef PROJDEFS_H
diff --git a/include/queue.h b/include/queue.h
index fd0e8ed..0edfe40 100644
--- a/include/queue.h
+++ b/include/queue.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
@@ -215,7 +214,7 @@
  *
  *  // Create a queue capable of containing 10 uint32_t values.
  *  xQueue1 = xQueueCreate( QUEUE_LENGTH, // The number of items the queue can hold.
- *                          ITEM_SIZE	  // The size of each item in the queue
+ *                          ITEM_SIZE     // The size of each item in the queue
  *                          &( ucQueueStorage[ 0 ] ), // The buffer that will hold the items in the queue.
  *                          &xQueueBuffer ); // The buffer that will hold the queue structure.
  *
@@ -236,9 +235,9 @@
  * queue. h
  * <pre>
  * BaseType_t xQueueSendToToFront(
- *                                 QueueHandle_t	xQueue,
- *                                 const void		*pvItemToQueue,
- *                                 TickType_t		xTicksToWait
+ *                                 QueueHandle_t    xQueue,
+ *                                 const void       *pvItemToQueue,
+ *                                 TickType_t       xTicksToWait
  *                             );
  * </pre>
  *
@@ -316,9 +315,9 @@
  * queue. h
  * <pre>
  * BaseType_t xQueueSendToBack(
- *                                 QueueHandle_t	xQueue,
- *                                 const void		*pvItemToQueue,
- *                                 TickType_t		xTicksToWait
+ *                                 QueueHandle_t    xQueue,
+ *                                 const void       *pvItemToQueue,
+ *                                 TickType_t       xTicksToWait
  *                             );
  * </pre>
  *
@@ -681,7 +680,7 @@
  *
  * @param xTicksToWait The maximum amount of time the task should block
  * waiting for an item to receive should the queue be empty at the time
- * of the call.	 The time is defined in tick periods so the constant
+ * of the call.  The time is defined in tick periods so the constant
  * portTICK_PERIOD_MS should be used to convert to real time if this is required.
  * xQueuePeek() will return immediately if xTicksToWait is 0 and the queue
  * is empty.
@@ -808,7 +807,7 @@
  *
  * @param xTicksToWait The maximum amount of time the task should block
  * waiting for an item to receive should the queue be empty at the time
- * of the call.	 xQueueReceive() will return immediately if xTicksToWait
+ * of the call.  xQueueReceive() will return immediately if xTicksToWait
  * is zero and the queue is empty.  The time is defined in tick periods so the
  * constant portTICK_PERIOD_MS should be used to convert to real time if this is
  * required.
@@ -1227,10 +1226,10 @@
  * queue. h
  * <pre>
  * BaseType_t xQueueGenericSendFromISR(
- *                                         QueueHandle_t		xQueue,
- *                                         const	void	*pvItemToQueue,
- *                                         BaseType_t	*pxHigherPriorityTaskWoken,
- *                                         BaseType_t	xCopyPosition
+ *                                     QueueHandle_t xQueue,
+ *                                     const void    *pvItemToQueue,
+ *                                     BaseType_t    *pxHigherPriorityTaskWoken,
+ *                                     BaseType_t     xCopyPosition
  *                                     );
  * </pre>
  *
@@ -1311,8 +1310,8 @@
  * queue. h
  * <pre>
  * BaseType_t xQueueReceiveFromISR(
- *                                     QueueHandle_t	xQueue,
- *                                     void	*pvBuffer,
+ *                                     QueueHandle_t    xQueue,
+ *                                     void *pvBuffer,
  *                                     BaseType_t *pxTaskWoken
  *                                 );
  * </pre>
diff --git a/include/semphr.h b/include/semphr.h
index 21f3aff..e45fabb 100644
--- a/include/semphr.h
+++ b/include/semphr.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef SEMAPHORE_H
@@ -562,7 +561,7 @@
  * Example usage:
  * <pre>
  \#define LONG_TIME 0xffff
- \#define TICKS_TO_WAIT	10
+ \#define TICKS_TO_WAIT 10
  * SemaphoreHandle_t xSemaphore = NULL;
  *
  * // Repetitive task.
diff --git a/include/stack_macros.h b/include/stack_macros.h
index 617e4d6..f145d7e 100644
--- a/include/stack_macros.h
+++ b/include/stack_macros.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef STACK_MACROS_H
diff --git a/include/stream_buffer.h b/include/stream_buffer.h
index 37b961e..8f2f97d 100644
--- a/include/stream_buffer.h
+++ b/include/stream_buffer.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*
diff --git a/include/task.h b/include/task.h
index c3d290b..560d62a 100644
--- a/include/task.h
+++ b/include/task.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
@@ -493,10 +492,10 @@
  * // Create an TaskParameters_t structure that defines the task to be created.
  * static const TaskParameters_t xCheckTaskParameters =
  * {
- *  vATask,		// pvTaskCode - the function that implements the task.
- *  "ATask",	// pcName - just a text name for the task to assist debugging.
- *  100,		// usStackDepth	- the stack size DEFINED IN WORDS.
- *  NULL,		// pvParameters - passed into the task function as the function parameters.
+ *  vATask,      // pvTaskCode - the function that implements the task.
+ *  "ATask",     // pcName - just a text name for the task to assist debugging.
+ *  100,         // usStackDepth - the stack size DEFINED IN WORDS.
+ *  NULL,        // pvParameters - passed into the task function as the function parameters.
  *  ( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.
  *  cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.
  *
@@ -505,10 +504,10 @@
  *  // different memory alignment requirements - refer to the FreeRTOS documentation
  *  // for full information.
  *  {
- *      // Base address					Length	Parameters
- *      { cReadWriteArray,				32,		portMPU_REGION_READ_WRITE },
- *      { cReadOnlyArray,				32,		portMPU_REGION_READ_ONLY },
- *      { cPrivilegedOnlyAccessArray,	128,	portMPU_REGION_PRIVILEGED_READ_WRITE }
+ *      // Base address                   Length     Parameters
+ *      { cReadWriteArray,                32,        portMPU_REGION_READ_WRITE },
+ *      { cReadOnlyArray,                 32,        portMPU_REGION_READ_ONLY },
+ *      { cPrivilegedOnlyAccessArray,     128,       portMPU_REGION_PRIVILEGED_READ_WRITE }
  *  }
  * };
  *
@@ -580,10 +579,10 @@
  * static PRIVILEGED_DATA StaticTask_t xTaskBuffer;
  * static const TaskParameters_t xCheckTaskParameters =
  * {
- *  vATask,		// pvTaskCode - the function that implements the task.
- *  "ATask",	// pcName - just a text name for the task to assist debugging.
- *  100,		// usStackDepth	- the stack size DEFINED IN WORDS.
- *  NULL,		// pvParameters - passed into the task function as the function parameters.
+ *  vATask,     // pvTaskCode - the function that implements the task.
+ *  "ATask",    // pcName - just a text name for the task to assist debugging.
+ *  100,        // usStackDepth - the stack size DEFINED IN WORDS.
+ *  NULL,       // pvParameters - passed into the task function as the function parameters.
  *  ( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.
  *  cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.
  *
@@ -592,10 +591,10 @@
  *  // different memory alignment requirements - refer to the FreeRTOS documentation
  *  // for full information.
  *  {
- *      // Base address					Length	Parameters
- *      { cReadWriteArray,				32,		portMPU_REGION_READ_WRITE },
- *      { cReadOnlyArray,				32,		portMPU_REGION_READ_ONLY },
- *      { cPrivilegedOnlyAccessArray,	128,	portMPU_REGION_PRIVILEGED_READ_WRITE }
+ *      // Base address                 Length   Parameters
+ *      { cReadWriteArray,              32,      portMPU_REGION_READ_WRITE },
+ *      { cReadOnlyArray,               32,      portMPU_REGION_READ_ONLY },
+ *      { cPrivilegedOnlyAccessArray,   128,     portMPU_REGION_PRIVILEGED_READ_WRITE }
  *  }
  *
  *  &xTaskBuffer; // Holds the task's data structure.
@@ -648,10 +647,10 @@
  * // unused so set to zero.
  * static const MemoryRegion_t xAltRegions[ portNUM_CONFIGURABLE_REGIONS ] =
  * {
- *  // Base address		Length		Parameters
- *  { ucOneKByte,		1024,		portMPU_REGION_READ_WRITE },
- *  { 0,				0,			0 },
- *  { 0,				0,			0 }
+ *  // Base address     Length      Parameters
+ *  { ucOneKByte,       1024,       portMPU_REGION_READ_WRITE },
+ *  { 0                 0,          0 },
+ *  { 0,                0,          0 }
  * };
  *
  * void vATask( void *pvParameters )
@@ -1313,7 +1312,7 @@
  * that were previously suspended by a call to vTaskSuspend().
  *
  * @return If resuming the scheduler caused a context switch then pdTRUE is
- *		  returned, otherwise pdFALSE is returned.
+ *         returned, otherwise pdFALSE is returned.
  *
  * Example usage:
  * <pre>
diff --git a/include/timers.h b/include/timers.h
index 9bdc5e2..cb99942 100644
--- a/include/timers.h
+++ b/include/timers.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
@@ -136,7 +135,7 @@
  *
  * @param pxCallbackFunction The function to call when the timer expires.
  * Callback functions must have the prototype defined by TimerCallbackFunction_t,
- * which is	"void vCallbackFunction( TimerHandle_t xTimer );".
+ * which is  "void vCallbackFunction( TimerHandle_t xTimer );".
  *
  * @return If the timer is successfully created then a handle to the newly
  * created timer is returned.  If the timer cannot be created because there is
@@ -239,7 +238,7 @@
  *                                  UBaseType_t uxAutoReload,
  *                                  void * pvTimerID,
  *                                  TimerCallbackFunction_t pxCallbackFunction,
- *									StaticTimer_t *pxTimerBuffer );
+ *                                  StaticTimer_t *pxTimerBuffer );
  *
  * Creates a new software timer instance, and returns a handle by which the
  * created software timer can be referenced.
@@ -548,9 +547,9 @@
     #define xTimerStop( xTimer, xTicksToWait )                                            xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0U, NULL, ( xTicksToWait ) )
 
 /**
- * BaseType_t xTimerChangePeriod(   TimerHandle_t xTimer,
- *										TickType_t xNewPeriod,
- *										TickType_t xTicksToWait );
+ * BaseType_t xTimerChangePeriod( TimerHandle_t xTimer,
+ *                                TickType_t xNewPeriod,
+ *                                TickType_t xTicksToWait );
  *
  * Timer functionality is provided by a timer service/daemon task.  Many of the
  * public FreeRTOS timer API functions send commands to the timer service task
@@ -791,7 +790,7 @@
 
 /**
  * BaseType_t xTimerStartFromISR(   TimerHandle_t xTimer,
- *									BaseType_t *pxHigherPriorityTaskWoken );
+ *                                  BaseType_t *pxHigherPriorityTaskWoken );
  *
  * A version of xTimerStart() that can be called from an interrupt service
  * routine.
@@ -877,7 +876,7 @@
 
 /**
  * BaseType_t xTimerStopFromISR(    TimerHandle_t xTimer,
- *									BaseType_t *pxHigherPriorityTaskWoken );
+ *                                  BaseType_t *pxHigherPriorityTaskWoken );
  *
  * A version of xTimerStop() that can be called from an interrupt service
  * routine.
@@ -940,8 +939,8 @@
 
 /**
  * BaseType_t xTimerChangePeriodFromISR( TimerHandle_t xTimer,
- *										 TickType_t xNewPeriod,
- *										 BaseType_t *pxHigherPriorityTaskWoken );
+ *                                       TickType_t xNewPeriod,
+ *                                       BaseType_t *pxHigherPriorityTaskWoken );
  *
  * A version of xTimerChangePeriod() that can be called from an interrupt
  * service routine.
@@ -1013,7 +1012,7 @@
 
 /**
  * BaseType_t xTimerResetFromISR(   TimerHandle_t xTimer,
- *									BaseType_t *pxHigherPriorityTaskWoken );
+ *                                  BaseType_t *pxHigherPriorityTaskWoken );
  *
  * A version of xTimerReset() that can be called from an interrupt service
  * routine.
@@ -1148,42 +1147,42 @@
  * Example usage:
  * @verbatim
  *
- *	// The callback function that will execute in the context of the daemon task.
+ *  // The callback function that will execute in the context of the daemon task.
  *  // Note callback functions must all use this same prototype.
  *  void vProcessInterface( void *pvParameter1, uint32_t ulParameter2 )
- *	{
- *		BaseType_t xInterfaceToService;
+ *  {
+ *      BaseType_t xInterfaceToService;
  *
- *		// The interface that requires servicing is passed in the second
+ *      // The interface that requires servicing is passed in the second
  *      // parameter.  The first parameter is not used in this case.
- *		xInterfaceToService = ( BaseType_t ) ulParameter2;
+ *      xInterfaceToService = ( BaseType_t ) ulParameter2;
  *
- *		// ...Perform the processing here...
- *	}
+ *      // ...Perform the processing here...
+ *  }
  *
- *	// An ISR that receives data packets from multiple interfaces
+ *  // An ISR that receives data packets from multiple interfaces
  *  void vAnISR( void )
- *	{
- *		BaseType_t xInterfaceToService, xHigherPriorityTaskWoken;
+ *  {
+ *      BaseType_t xInterfaceToService, xHigherPriorityTaskWoken;
  *
- *		// Query the hardware to determine which interface needs processing.
- *		xInterfaceToService = prvCheckInterfaces();
+ *      // Query the hardware to determine which interface needs processing.
+ *      xInterfaceToService = prvCheckInterfaces();
  *
  *      // The actual processing is to be deferred to a task.  Request the
  *      // vProcessInterface() callback function is executed, passing in the
- *		// number of the interface that needs processing.  The interface to
- *		// service is passed in the second parameter.  The first parameter is
- *		// not used in this case.
- *		xHigherPriorityTaskWoken = pdFALSE;
- *		xTimerPendFunctionCallFromISR( vProcessInterface, NULL, ( uint32_t ) xInterfaceToService, &xHigherPriorityTaskWoken );
+ *      // number of the interface that needs processing.  The interface to
+ *      // service is passed in the second parameter.  The first parameter is
+ *      // not used in this case.
+ *      xHigherPriorityTaskWoken = pdFALSE;
+ *      xTimerPendFunctionCallFromISR( vProcessInterface, NULL, ( uint32_t ) xInterfaceToService, &xHigherPriorityTaskWoken );
  *
- *		// If xHigherPriorityTaskWoken is now set to pdTRUE then a context
- *		// switch should be requested.  The macro used is port specific and will
- *		// be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() - refer to
- *		// the documentation page for the port being used.
- *		portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+ *      // If xHigherPriorityTaskWoken is now set to pdTRUE then a context
+ *      // switch should be requested.  The macro used is port specific and will
+ *      // be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() - refer to
+ *      // the documentation page for the port being used.
+ *      portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
  *
- *	}
+ *  }
  * @endverbatim
  */
     BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend,
diff --git a/list.c b/list.c
index 69858c2..be86c86 100644
--- a/list.c
+++ b/list.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
diff --git a/portable/ARMv8M/non_secure/port.c b/portable/ARMv8M/non_secure/port.c
index 8bf1ac1..ba5991c 100644
--- a/portable/ARMv8M/non_secure/port.c
+++ b/portable/ARMv8M/non_secure/port.c
@@ -1,1192 +1,1192 @@
-/*
- * FreeRTOS Kernel V10.3.1
- * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- */
-
-/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
- * all the API functions to use the MPU wrappers. That should only be done when
- * task.h is included from an application file. */
-#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
-
-/* Scheduler includes. */
-#include "FreeRTOS.h"
-#include "task.h"
-
-/* MPU wrappers includes. */
-#include "mpu_wrappers.h"
-
-/* Portasm includes. */
-#include "portasm.h"
-
-#if ( configENABLE_TRUSTZONE == 1 )
-    /* Secure components includes. */
-    #include "secure_context.h"
-    #include "secure_init.h"
-#endif /* configENABLE_TRUSTZONE */
-
-#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
-
-/**
- * The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
- * i.e. the processor boots as secure and never jumps to the non-secure side.
- * The Trust Zone support in the port must be disabled in order to run FreeRTOS
- * on the secure side. The following are the valid configuration seetings:
- *
- * 1. Run FreeRTOS on the Secure Side:
- *    configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
- *
- * 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
- *    configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
- *
- * 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
- *    configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
- */
-#if ( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
-    #error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
-#endif
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the NVIC.
- */
-#define portNVIC_SYSTICK_CTRL_REG             ( *( ( volatile uint32_t * ) 0xe000e010 ) )
-#define portNVIC_SYSTICK_LOAD_REG             ( *( ( volatile uint32_t * ) 0xe000e014 ) )
-#define portNVIC_SYSTICK_CURRENT_VALUE_REG    ( *( ( volatile uint32_t * ) 0xe000e018 ) )
-#define portNVIC_SHPR3_REG                    ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
-#define portNVIC_SYSTICK_ENABLE_BIT           ( 1UL << 0UL )
-#define portNVIC_SYSTICK_INT_BIT              ( 1UL << 1UL )
-#define portNVIC_SYSTICK_COUNT_FLAG_BIT       ( 1UL << 16UL )
-#define portMIN_INTERRUPT_PRIORITY            ( 255UL )
-#define portNVIC_PENDSV_PRI                   ( portMIN_INTERRUPT_PRIORITY << 16UL )
-#define portNVIC_SYSTICK_PRI                  ( portMIN_INTERRUPT_PRIORITY << 24UL )
-#ifndef configSYSTICK_CLOCK_HZ
-    #define configSYSTICK_CLOCK_HZ            configCPU_CLOCK_HZ
-    /* Ensure the SysTick is clocked at the same frequency as the core. */
-    #define portNVIC_SYSTICK_CLK_BIT          ( 1UL << 2UL )
-#else
-
-/* The way the SysTick is clocked is not modified in case it is not the
- * same a the core. */
-    #define portNVIC_SYSTICK_CLK_BIT    ( 0 )
-#endif
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the SCB.
- */
-#define portSCB_SYS_HANDLER_CTRL_STATE_REG    ( *( volatile uint32_t * ) 0xe000ed24 )
-#define portSCB_MEM_FAULT_ENABLE_BIT          ( 1UL << 16UL )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the FPU.
- */
-#define portCPACR               ( ( volatile uint32_t * ) 0xe000ed88 )              /* Coprocessor Access Control Register. */
-#define portCPACR_CP10_VALUE    ( 3UL )
-#define portCPACR_CP11_VALUE    portCPACR_CP10_VALUE
-#define portCPACR_CP10_POS      ( 20UL )
-#define portCPACR_CP11_POS      ( 22UL )
-
-#define portFPCCR               ( ( volatile uint32_t * ) 0xe000ef34 )              /* Floating Point Context Control Register. */
-#define portFPCCR_ASPEN_POS     ( 31UL )
-#define portFPCCR_ASPEN_MASK    ( 1UL << portFPCCR_ASPEN_POS )
-#define portFPCCR_LSPEN_POS     ( 30UL )
-#define portFPCCR_LSPEN_MASK    ( 1UL << portFPCCR_LSPEN_POS )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the MPU.
- */
-#define portMPU_TYPE_REG                      ( *( ( volatile uint32_t * ) 0xe000ed90 ) )
-#define portMPU_CTRL_REG                      ( *( ( volatile uint32_t * ) 0xe000ed94 ) )
-#define portMPU_RNR_REG                       ( *( ( volatile uint32_t * ) 0xe000ed98 ) )
-
-#define portMPU_RBAR_REG                      ( *( ( volatile uint32_t * ) 0xe000ed9c ) )
-#define portMPU_RLAR_REG                      ( *( ( volatile uint32_t * ) 0xe000eda0 ) )
-
-#define portMPU_RBAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda4 ) )
-#define portMPU_RLAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda8 ) )
-
-#define portMPU_RBAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edac ) )
-#define portMPU_RLAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edb0 ) )
-
-#define portMPU_RBAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb4 ) )
-#define portMPU_RLAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb8 ) )
-
-#define portMPU_MAIR0_REG                     ( *( ( volatile uint32_t * ) 0xe000edc0 ) )
-#define portMPU_MAIR1_REG                     ( *( ( volatile uint32_t * ) 0xe000edc4 ) )
-
-#define portMPU_RBAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
-#define portMPU_RLAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
-
-#define portMPU_MAIR_ATTR0_POS                ( 0UL )
-#define portMPU_MAIR_ATTR0_MASK               ( 0x000000ff )
-
-#define portMPU_MAIR_ATTR1_POS                ( 8UL )
-#define portMPU_MAIR_ATTR1_MASK               ( 0x0000ff00 )
-
-#define portMPU_MAIR_ATTR2_POS                ( 16UL )
-#define portMPU_MAIR_ATTR2_MASK               ( 0x00ff0000 )
-
-#define portMPU_MAIR_ATTR3_POS                ( 24UL )
-#define portMPU_MAIR_ATTR3_MASK               ( 0xff000000 )
-
-#define portMPU_MAIR_ATTR4_POS                ( 0UL )
-#define portMPU_MAIR_ATTR4_MASK               ( 0x000000ff )
-
-#define portMPU_MAIR_ATTR5_POS                ( 8UL )
-#define portMPU_MAIR_ATTR5_MASK               ( 0x0000ff00 )
-
-#define portMPU_MAIR_ATTR6_POS                ( 16UL )
-#define portMPU_MAIR_ATTR6_MASK               ( 0x00ff0000 )
-
-#define portMPU_MAIR_ATTR7_POS                ( 24UL )
-#define portMPU_MAIR_ATTR7_MASK               ( 0xff000000 )
-
-#define portMPU_RLAR_ATTR_INDEX0              ( 0UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX1              ( 1UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX2              ( 2UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX3              ( 3UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX4              ( 4UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX5              ( 5UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX6              ( 6UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX7              ( 7UL << 1UL )
-
-#define portMPU_RLAR_REGION_ENABLE            ( 1UL )
-
-/* Enable privileged access to unmapped region. */
-#define portMPU_PRIV_BACKGROUND_ENABLE_BIT    ( 1UL << 2UL )
-
-/* Enable MPU. */
-#define portMPU_ENABLE_BIT                    ( 1UL << 0UL )
-
-/* Expected value of the portMPU_TYPE register. */
-#define portEXPECTED_MPU_TYPE_VALUE           ( 8UL << 8UL ) /* 8 regions, unified. */
-/*-----------------------------------------------------------*/
-
-/**
- * @brief The maximum 24-bit number.
- *
- * It is needed because the systick is a 24-bit counter.
- */
-#define portMAX_24_BIT_NUMBER       ( 0xffffffUL )
-
-/**
- * @brief A fiddle factor to estimate the number of SysTick counts that would
- * have occurred while the SysTick counter is stopped during tickless idle
- * calculations.
- */
-#define portMISSED_COUNTS_FACTOR    ( 45UL )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to set up the initial stack.
- */
-#define portINITIAL_XPSR    ( 0x01000000 )
-
-#if ( configRUN_FREERTOS_SECURE_ONLY == 1 )
-
-/**
- * @brief Initial EXC_RETURN value.
- *
- *     FF         FF         FF         FD
- * 1111 1111  1111 1111  1111 1111  1111 1101
- *
- * Bit[6] - 1 --> The exception was taken from the Secure state.
- * Bit[5] - 1 --> Do not skip stacking of additional state context.
- * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
- * Bit[3] - 1 --> Return to the Thread mode.
- * Bit[2] - 1 --> Restore registers from the process stack.
- * Bit[1] - 0 --> Reserved, 0.
- * Bit[0] - 1 --> The exception was taken to the Secure state.
- */
-    #define portINITIAL_EXC_RETURN    ( 0xfffffffd )
-#else
-
-/**
- * @brief Initial EXC_RETURN value.
- *
- *     FF         FF         FF         BC
- * 1111 1111  1111 1111  1111 1111  1011 1100
- *
- * Bit[6] - 0 --> The exception was taken from the Non-Secure state.
- * Bit[5] - 1 --> Do not skip stacking of additional state context.
- * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
- * Bit[3] - 1 --> Return to the Thread mode.
- * Bit[2] - 1 --> Restore registers from the process stack.
- * Bit[1] - 0 --> Reserved, 0.
- * Bit[0] - 0 --> The exception was taken to the Non-Secure state.
- */
-    #define portINITIAL_EXC_RETURN    ( 0xffffffbc )
-#endif /* configRUN_FREERTOS_SECURE_ONLY */
-
-/**
- * @brief CONTROL register privileged bit mask.
- *
- * Bit[0] in CONTROL register tells the privilege:
- *  Bit[0] = 0 ==> The task is privileged.
- *  Bit[0] = 1 ==> The task is not privileged.
- */
-#define portCONTROL_PRIVILEGED_MASK         ( 1UL << 0UL )
-
-/**
- * @brief Initial CONTROL register values.
- */
-#define portINITIAL_CONTROL_UNPRIVILEGED    ( 0x3 )
-#define portINITIAL_CONTROL_PRIVILEGED      ( 0x2 )
-
-/**
- * @brief Let the user override the pre-loading of the initial LR with the
- * address of prvTaskExitError() in case it messes up unwinding of the stack
- * in the debugger.
- */
-#ifdef configTASK_RETURN_ADDRESS
-    #define portTASK_RETURN_ADDRESS    configTASK_RETURN_ADDRESS
-#else
-    #define portTASK_RETURN_ADDRESS    prvTaskExitError
-#endif
-
-/**
- * @brief If portPRELOAD_REGISTERS then registers will be given an initial value
- * when a task is created. This helps in debugging at the cost of code size.
- */
-#define portPRELOAD_REGISTERS    1
-
-/**
- * @brief A task is created without a secure context, and must call
- * portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
- * any secure calls.
- */
-#define portNO_SECURE_CONTEXT    0
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Used to catch tasks that attempt to return from their implementing
- * function.
- */
-static void prvTaskExitError( void );
-
-#if ( configENABLE_MPU == 1 )
-
-/**
- * @brief Setup the Memory Protection Unit (MPU).
- */
-    static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
-#endif /* configENABLE_MPU */
-
-#if ( configENABLE_FPU == 1 )
-
-/**
- * @brief Setup the Floating Point Unit (FPU).
- */
-    static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
-#endif /* configENABLE_FPU */
-
-/**
- * @brief Setup the timer to generate the tick interrupts.
- *
- * The implementation in this file is weak to allow application writers to
- * change the timer used to generate the tick interrupt.
- */
-void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Checks whether the current execution context is interrupt.
- *
- * @return pdTRUE if the current execution context is interrupt, pdFALSE
- * otherwise.
- */
-BaseType_t xPortIsInsideInterrupt( void );
-
-/**
- * @brief Yield the processor.
- */
-void vPortYield( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Enter critical section.
- */
-void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Exit from critical section.
- */
-void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief SysTick handler.
- */
-void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief C part of SVC handler.
- */
-portDONT_DISCARD void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) PRIVILEGED_FUNCTION;
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Each task maintains its own interrupt status in the critical nesting
- * variable.
- */
-PRIVILEGED_DATA static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
-
-#if ( configENABLE_TRUSTZONE == 1 )
-
-/**
- * @brief Saved as part of the task context to indicate which context the
- * task is using on the secure side.
- */
-    PRIVILEGED_DATA portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
-#endif /* configENABLE_TRUSTZONE */
-
-#if ( configUSE_TICKLESS_IDLE == 1 )
-
-/**
- * @brief The number of SysTick increments that make up one tick period.
- */
-    PRIVILEGED_DATA static uint32_t ulTimerCountsForOneTick = 0;
-
-/**
- * @brief The maximum number of tick periods that can be suppressed is
- * limited by the 24 bit resolution of the SysTick timer.
- */
-    PRIVILEGED_DATA static uint32_t xMaximumPossibleSuppressedTicks = 0;
-
-/**
- * @brief Compensate for the CPU cycles that pass while the SysTick is
- * stopped (low power functionality only).
- */
-    PRIVILEGED_DATA static uint32_t ulStoppedTimerCompensation = 0;
-#endif /* configUSE_TICKLESS_IDLE */
-/*-----------------------------------------------------------*/
-
-#if ( configUSE_TICKLESS_IDLE == 1 )
-    __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
-    {
-        uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
-        TickType_t xModifiableIdleTime;
-
-        /* Make sure the SysTick reload value does not overflow the counter. */
-        if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
-        {
-            xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
-        }
-
-        /* Stop the SysTick momentarily. The time the SysTick is stopped for is
-         * accounted for as best it can be, but using the tickless mode will
-         * inevitably result in some tiny drift of the time maintained by the
-         * kernel with respect to calendar time. */
-        portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
-
-        /* Calculate the reload value required to wait xExpectedIdleTime
-         * tick periods. -1 is used because this code will execute part way
-         * through one of the tick periods. */
-        ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
-
-        if( ulReloadValue > ulStoppedTimerCompensation )
-        {
-            ulReloadValue -= ulStoppedTimerCompensation;
-        }
-
-        /* Enter a critical section but don't use the taskENTER_CRITICAL()
-         * method as that will mask interrupts that should exit sleep mode. */
-        __asm volatile ( "cpsid i" ::: "memory" );
-        __asm volatile ( "dsb" );
-        __asm volatile ( "isb" );
-
-        /* If a context switch is pending or a task is waiting for the scheduler
-         * to be un-suspended then abandon the low power entry. */
-        if( eTaskConfirmSleepModeStatus() == eAbortSleep )
-        {
-            /* Restart from whatever is left in the count register to complete
-             * this tick period. */
-            portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-            /* Restart SysTick. */
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-            /* Reset the reload register to the value required for normal tick
-             * periods. */
-            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-
-            /* Re-enable interrupts - see comments above the cpsid instruction()
-             * above. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-        }
-        else
-        {
-            /* Set the new reload value. */
-            portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
-
-            /* Clear the SysTick count flag and set the count value back to
-             * zero. */
-            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-
-            /* Restart SysTick. */
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-            /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
-             * set its parameter to 0 to indicate that its implementation
-             * contains its own wait for interrupt or wait for event
-             * instruction, and so wfi should not be executed again. However,
-             * the original expected idle time variable must remain unmodified,
-             * so a copy is taken. */
-            xModifiableIdleTime = xExpectedIdleTime;
-            configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
-
-            if( xModifiableIdleTime > 0 )
-            {
-                __asm volatile ( "dsb" ::: "memory" );
-                __asm volatile ( "wfi" );
-                __asm volatile ( "isb" );
-            }
-
-            configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
-
-            /* Re-enable interrupts to allow the interrupt that brought the MCU
-             * out of sleep mode to execute immediately. See comments above
-             * the cpsid instruction above. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-            __asm volatile ( "dsb" );
-            __asm volatile ( "isb" );
-
-            /* Disable interrupts again because the clock is about to be stopped
-             * and interrupts that execute while the clock is stopped will
-             * increase any slippage between the time maintained by the RTOS and
-             * calendar time. */
-            __asm volatile ( "cpsid i" ::: "memory" );
-            __asm volatile ( "dsb" );
-            __asm volatile ( "isb" );
-
-            /* Disable the SysTick clock without reading the
-             * portNVIC_SYSTICK_CTRL_REG register to ensure the
-             * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.
-             * Again, the time the SysTick is stopped for is accounted for as
-             * best it can be, but using the tickless mode will inevitably
-             * result in some tiny drift of the time maintained by the kernel
-             * with respect to calendar time*/
-            portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
-
-            /* Determine if the SysTick clock has already counted to zero and
-             * been set back to the current reload value (the reload back being
-             * correct for the entire expected idle time) or if the SysTick is
-             * yet to count to zero (in which case an interrupt other than the
-             * SysTick must have brought the system out of sleep mode). */
-            if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
-            {
-                uint32_t ulCalculatedLoadValue;
-
-                /* The tick interrupt is already pending, and the SysTick count
-                 * reloaded with ulReloadValue.  Reset the
-                 * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
-                 * period. */
-                ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
-
-                /* Don't allow a tiny value, or values that have somehow
-                 * underflowed because the post sleep hook did something
-                 * that took too long. */
-                if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
-                {
-                    ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
-                }
-
-                portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
-
-                /* As the pending tick will be processed as soon as this
-                 * function exits, the tick value maintained by the tick is
-                 * stepped forward by one less than the time spent waiting. */
-                ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
-            }
-            else
-            {
-                /* Something other than the tick interrupt ended the sleep.
-                 * Work out how long the sleep lasted rounded to complete tick
-                 * periods (not the ulReload value which accounted for part
-                 * ticks). */
-                ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-                /* How many complete tick periods passed while the processor
-                 * was waiting? */
-                ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
-
-                /* The reload value is set to whatever fraction of a single tick
-                 * period remains. */
-                portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
-            }
-
-            /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
-             * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
-             * value. */
-            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-            vTaskStepTick( ulCompleteTickPeriods );
-            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-
-            /* Exit with interrupts enabled. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-        }
-    }
-#endif /* configUSE_TICKLESS_IDLE */
-/*-----------------------------------------------------------*/
-
-__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Calculate the constants required to configure the tick interrupt. */
-    #if ( configUSE_TICKLESS_IDLE == 1 )
-        {
-            ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
-            xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
-            ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
-        }
-    #endif /* configUSE_TICKLESS_IDLE */
-
-    /* Stop and reset the SysTick. */
-    portNVIC_SYSTICK_CTRL_REG = 0UL;
-    portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-
-    /* Configure SysTick to interrupt at the requested rate. */
-    portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
-    portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
-}
-/*-----------------------------------------------------------*/
-
-static void prvTaskExitError( void )
-{
-    volatile uint32_t ulDummy = 0UL;
-
-    /* A function that implements a task must not exit or attempt to return to
-     * its caller as there is nothing to return to. If a task wants to exit it
-     * should instead call vTaskDelete( NULL ). Artificially force an assert()
-     * to be triggered if configASSERT() is defined, then stop here so
-     * application writers can catch the error. */
-    configASSERT( ulCriticalNesting == ~0UL );
-    portDISABLE_INTERRUPTS();
-
-    while( ulDummy == 0 )
-    {
-        /* This file calls prvTaskExitError() after the scheduler has been
-         * started to remove a compiler warning about the function being
-         * defined but never called.  ulDummy is used purely to quieten other
-         * warnings about code appearing after this function is called - making
-         * ulDummy volatile makes the compiler think the function could return
-         * and therefore not output an 'unreachable code' warning for code that
-         * appears after it. */
-    }
-}
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_MPU == 1 )
-    static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
-    {
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __privileged_functions_start__;
-            extern uint32_t * __privileged_functions_end__;
-            extern uint32_t * __syscalls_flash_start__;
-            extern uint32_t * __syscalls_flash_end__;
-            extern uint32_t * __unprivileged_flash_start__;
-            extern uint32_t * __unprivileged_flash_end__;
-            extern uint32_t * __privileged_sram_start__;
-            extern uint32_t * __privileged_sram_end__;
-        #else /* if defined( __ARMCC_VERSION ) */
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __privileged_functions_start__[];
-            extern uint32_t __privileged_functions_end__[];
-            extern uint32_t __syscalls_flash_start__[];
-            extern uint32_t __syscalls_flash_end__[];
-            extern uint32_t __unprivileged_flash_start__[];
-            extern uint32_t __unprivileged_flash_end__[];
-            extern uint32_t __privileged_sram_start__[];
-            extern uint32_t __privileged_sram_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-
-        /* Check that the MPU is present. */
-        if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
-        {
-            /* MAIR0 - Index 0. */
-            portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
-            /* MAIR0 - Index 1. */
-            portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
-
-            /* Setup privileged flash as Read Only so that privileged tasks can
-             * read it but not modify. */
-            portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_PRIVILEGED_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup unprivileged flash as Read Only by both privileged and
-             * unprivileged tasks. All tasks can read it but no-one can modify. */
-            portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup unprivileged syscalls flash as Read Only by both privileged
-             * and unprivileged tasks. All tasks can read it but no-one can modify. */
-            portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup RAM containing kernel data for privileged access only. */
-            portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
-                               ( portMPU_REGION_EXECUTE_NEVER );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Enable mem fault. */
-            portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE_BIT;
-
-            /* Enable MPU with privileged background access i.e. unmapped
-             * regions have privileged access. */
-            portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE_BIT | portMPU_ENABLE_BIT );
-        }
-    }
-#endif /* configENABLE_MPU */
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_FPU == 1 )
-    static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
-    {
-        #if ( configENABLE_TRUSTZONE == 1 )
-            {
-                /* Enable non-secure access to the FPU. */
-                SecureInit_EnableNSFPUAccess();
-            }
-        #endif /* configENABLE_TRUSTZONE */
-
-        /* CP10 = 11 ==> Full access to FPU i.e. both privileged and
-         * unprivileged code should be able to access FPU. CP11 should be
-         * programmed to the same value as CP10. */
-        *( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
-                            ( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
-                            );
-
-        /* ASPEN = 1 ==> Hardware should automatically preserve floating point
-         * context on exception entry and restore on exception return.
-         * LSPEN = 1 ==> Enable lazy context save of FP state. */
-        *( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
-    }
-#endif /* configENABLE_FPU */
-/*-----------------------------------------------------------*/
-
-void vPortYield( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Set a PendSV to request a context switch. */
-    portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-
-    /* Barriers are normally not required but do ensure the code is
-     * completely within the specified behaviour for the architecture. */
-    __asm volatile ( "dsb" ::: "memory" );
-    __asm volatile ( "isb" );
-}
-/*-----------------------------------------------------------*/
-
-void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
-{
-    portDISABLE_INTERRUPTS();
-    ulCriticalNesting++;
-
-    /* Barriers are normally not required but do ensure the code is
-     * completely within the specified behaviour for the architecture. */
-    __asm volatile ( "dsb" ::: "memory" );
-    __asm volatile ( "isb" );
-}
-/*-----------------------------------------------------------*/
-
-void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
-{
-    configASSERT( ulCriticalNesting );
-    ulCriticalNesting--;
-
-    if( ulCriticalNesting == 0 )
-    {
-        portENABLE_INTERRUPTS();
-    }
-}
-/*-----------------------------------------------------------*/
-
-void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
-{
-    uint32_t ulPreviousMask;
-
-    ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
-    {
-        /* Increment the RTOS tick. */
-        if( xTaskIncrementTick() != pdFALSE )
-        {
-            /* Pend a context switch. */
-            portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-        }
-    }
-    portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
-}
-/*-----------------------------------------------------------*/
-
-void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
-{
-    #if ( configENABLE_MPU == 1 )
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __syscalls_flash_start__;
-            extern uint32_t * __syscalls_flash_end__;
-        #else
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __syscalls_flash_start__[];
-            extern uint32_t __syscalls_flash_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-    #endif /* configENABLE_MPU */
-
-    uint32_t ulPC;
-
-    #if ( configENABLE_TRUSTZONE == 1 )
-        uint32_t ulR0;
-        #if ( configENABLE_MPU == 1 )
-            uint32_t ulControl, ulIsTaskPrivileged;
-        #endif /* configENABLE_MPU */
-    #endif /* configENABLE_TRUSTZONE */
-    uint8_t ucSVCNumber;
-
-    /* Register are stored on the stack in the following order - R0, R1, R2, R3,
-     * R12, LR, PC, xPSR. */
-    ulPC = pulCallerStackAddress[ 6 ];
-    ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ];
-
-    switch( ucSVCNumber )
-    {
-        #if ( configENABLE_TRUSTZONE == 1 )
-            case portSVC_ALLOCATE_SECURE_CONTEXT:
-
-                /* R0 contains the stack size passed as parameter to the
-                 * vPortAllocateSecureContext function. */
-                ulR0 = pulCallerStackAddress[ 0 ];
-
-                #if ( configENABLE_MPU == 1 )
-                    {
-                        /* Read the CONTROL register value. */
-                        __asm volatile ( "mrs %0, control"  : "=r" ( ulControl ) );
-
-                        /* The task that raised the SVC is privileged if Bit[0]
-                         * in the CONTROL register is 0. */
-                        ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
-
-                        /* Allocate and load a context for the secure task. */
-                        xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
-                    }
-                #else /* if ( configENABLE_MPU == 1 ) */
-                    {
-                        /* Allocate and load a context for the secure task. */
-                        xSecureContext = SecureContext_AllocateContext( ulR0 );
-                    }
-                #endif /* configENABLE_MPU */
-
-                configASSERT( xSecureContext != NULL );
-                SecureContext_LoadContext( xSecureContext );
-                break;
-
-            case portSVC_FREE_SECURE_CONTEXT:
-                /* R0 contains the secure context handle to be freed. */
-                ulR0 = pulCallerStackAddress[ 0 ];
-
-                /* Free the secure context. */
-                SecureContext_FreeContext( ( SecureContextHandle_t ) ulR0 );
-                break;
-        #endif /* configENABLE_TRUSTZONE */
-
-        case portSVC_START_SCHEDULER:
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    /* De-prioritize the non-secure exceptions so that the
-                     * non-secure pendSV runs at the lowest priority. */
-                    SecureInit_DePrioritizeNSExceptions();
-
-                    /* Initialize the secure context management system. */
-                    SecureContext_Init();
-                }
-            #endif /* configENABLE_TRUSTZONE */
-
-            #if ( configENABLE_FPU == 1 )
-                {
-                    /* Setup the Floating Point Unit (FPU). */
-                    prvSetupFPU();
-                }
-            #endif /* configENABLE_FPU */
-
-            /* Setup the context of the first task so that the first task starts
-             * executing. */
-            vRestoreContextOfFirstTask();
-            break;
-
-            #if ( configENABLE_MPU == 1 )
-                case portSVC_RAISE_PRIVILEGE:
-
-                    /* Only raise the privilege, if the svc was raised from any of
-                     * the system calls. */
-                    if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) &&
-                        ( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) )
-                    {
-                        vRaisePrivilege();
-                    }
-                    break;
-            #endif /* configENABLE_MPU */
-
-        default:
-            /* Incorrect SVC call. */
-            configASSERT( pdFALSE );
-    }
-}
-/*-----------------------------------------------------------*/
-/* *INDENT-OFF* */
-#if ( configENABLE_MPU == 1 )
-    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
-                                         StackType_t * pxEndOfStack,
-                                         TaskFunction_t pxCode,
-                                         void * pvParameters,
-                                         BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
-#else
-    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
-                                         StackType_t * pxEndOfStack,
-                                         TaskFunction_t pxCode,
-                                         void * pvParameters ) /* PRIVILEGED_FUNCTION */
-#endif /* configENABLE_MPU */
-/* *INDENT-ON* */
-{
-    /* Simulate the stack frame as it would be created by a context switch
-     * interrupt. */
-    #if ( portPRELOAD_REGISTERS == 0 )
-        {
-            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
-            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
-            pxTopOfStack -= 5;                                       /* R12, R3, R2 and R1. */
-            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
-            pxTopOfStack -= 9;                                       /* R11..R4, EXC_RETURN. */
-            *pxTopOfStack = portINITIAL_EXC_RETURN;
-
-            #if ( configENABLE_MPU == 1 )
-                {
-                    pxTopOfStack--;
-
-                    if( xRunPrivileged == pdTRUE )
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                    else
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                }
-            #endif /* configENABLE_MPU */
-
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
-
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    pxTopOfStack--;
-                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
-                }
-            #endif /* configENABLE_TRUSTZONE */
-        }
-    #else /* portPRELOAD_REGISTERS */
-        {
-            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
-            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x12121212UL;            /* R12 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x03030303UL;            /* R3 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x02020202UL;            /* R2 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x01010101UL;            /* R1 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x11111111UL;            /* R11 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x10101010UL;            /* R10 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x09090909UL;            /* R09 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x08080808UL;            /* R08 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x07070707UL;            /* R07 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x06060606UL;            /* R06 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x05050505UL;            /* R05 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x04040404UL;            /* R04 */
-            pxTopOfStack--;
-            *pxTopOfStack = portINITIAL_EXC_RETURN;                  /* EXC_RETURN */
-
-            #if ( configENABLE_MPU == 1 )
-                {
-                    pxTopOfStack--;
-
-                    if( xRunPrivileged == pdTRUE )
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                    else
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                }
-            #endif /* configENABLE_MPU */
-
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
-
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    pxTopOfStack--;
-                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
-                }
-            #endif /* configENABLE_TRUSTZONE */
-        }
-    #endif /* portPRELOAD_REGISTERS */
-
-    return pxTopOfStack;
-}
-/*-----------------------------------------------------------*/
-
-BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Make PendSV, CallSV and SysTick the same priority as the kernel. */
-    portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
-    portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
-
-    #if ( configENABLE_MPU == 1 )
-        {
-            /* Setup the Memory Protection Unit (MPU). */
-            prvSetupMPU();
-        }
-    #endif /* configENABLE_MPU */
-
-    /* Start the timer that generates the tick ISR. Interrupts are disabled
-     * here already. */
-    vPortSetupTimerInterrupt();
-
-    /* Initialize the critical nesting count ready for the first task. */
-    ulCriticalNesting = 0;
-
-    /* Start the first task. */
-    vStartFirstTask();
-
-    /* Should never get here as the tasks will now be executing. Call the task
-     * exit error function to prevent compiler warnings about a static function
-     * not being called in the case that the application writer overrides this
-     * functionality by defining configTASK_RETURN_ADDRESS. Call
-     * vTaskSwitchContext() so link time optimization does not remove the
-     * symbol. */
-    vTaskSwitchContext();
-    prvTaskExitError();
-
-    /* Should not get here. */
-    return 0;
-}
-/*-----------------------------------------------------------*/
-
-void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Not implemented in ports where there is nothing to return to.
-     * Artificially force an assert. */
-    configASSERT( ulCriticalNesting == 1000UL );
-}
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_MPU == 1 )
-    void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
-                                    const struct xMEMORY_REGION * const xRegions,
-                                    StackType_t * pxBottomOfStack,
-                                    uint32_t ulStackDepth )
-    {
-        uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
-        int32_t lIndex = 0;
-
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __privileged_sram_start__;
-            extern uint32_t * __privileged_sram_end__;
-        #else
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __privileged_sram_start__[];
-            extern uint32_t __privileged_sram_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-
-        /* Setup MAIR0. */
-        xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
-        xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
-
-        /* This function is called automatically when the task is created - in
-         * which case the stack region parameters will be valid.  At all other
-         * times the stack parameters will not be valid and it is assumed that
-         * the stack region has already been configured. */
-        if( ulStackDepth > 0 )
-        {
-            ulRegionStartAddress = ( uint32_t ) pxBottomOfStack;
-            ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) - 1;
-
-            /* If the stack is within the privileged SRAM, do not protect it
-             * using a separate MPU region. This is needed because privileged
-             * SRAM is already protected using an MPU region and ARMv8-M does
-             * not allow overlapping MPU regions. */
-            if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
-                ( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
-            {
-                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
-                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
-            }
-            else
-            {
-                /* Define the region that allows access to the stack. */
-                ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
-                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
-
-                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
-                                                             ( portMPU_REGION_NON_SHAREABLE ) |
-                                                             ( portMPU_REGION_READ_WRITE ) |
-                                                             ( portMPU_REGION_EXECUTE_NEVER );
-
-                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
-                                                             ( portMPU_RLAR_ATTR_INDEX0 ) |
-                                                             ( portMPU_RLAR_REGION_ENABLE );
-            }
-        }
-
-        /* User supplied configurable regions. */
-        for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
-        {
-            /* If xRegions is NULL i.e. the task has not specified any MPU
-             * region, the else part ensures that all the configurable MPU
-             * regions are invalidated. */
-            if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
-            {
-                /* Translate the generic region definition contained in xRegions
-                 * into the ARMv8 specific MPU settings that are then stored in
-                 * xMPUSettings. */
-                ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
-                ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
-                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
-
-                /* Start address. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
-                                                                          ( portMPU_REGION_NON_SHAREABLE );
-
-                /* RO/RW. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
-                }
-                else
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
-                }
-
-                /* XN. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
-                }
-
-                /* End Address. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
-                                                                          ( portMPU_RLAR_REGION_ENABLE );
-
-                /* Normal memory/ Device memory. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
-                {
-                    /* Attr1 in MAIR0 is configured as device memory. */
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
-                }
-                else
-                {
-                    /* Attr1 in MAIR0 is configured as normal memory. */
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
-                }
-            }
-            else
-            {
-                /* Invalidate the region. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
-            }
-
-            lIndex++;
-        }
-    }
-#endif /* configENABLE_MPU */
-/*-----------------------------------------------------------*/
-
-BaseType_t xPortIsInsideInterrupt( void )
-{
-    uint32_t ulCurrentInterrupt;
-    BaseType_t xReturn;
-
-    /* Obtain the number of the currently executing interrupt. Interrupt Program
-     * Status Register (IPSR) holds the exception number of the currently-executing
-     * exception or zero for Thread mode.*/
-    __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
-
-    if( ulCurrentInterrupt == 0 )
-    {
-        xReturn = pdFALSE;
-    }
-    else
-    {
-        xReturn = pdTRUE;
-    }
-
-    return xReturn;
-}
-/*-----------------------------------------------------------*/
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ */
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+ * all the API functions to use the MPU wrappers. That should only be done when
+ * task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* MPU wrappers includes. */
+#include "mpu_wrappers.h"
+
+/* Portasm includes. */
+#include "portasm.h"
+
+#if ( configENABLE_TRUSTZONE == 1 )
+    /* Secure components includes. */
+    #include "secure_context.h"
+    #include "secure_init.h"
+#endif /* configENABLE_TRUSTZONE */
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/**
+ * The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
+ * i.e. the processor boots as secure and never jumps to the non-secure side.
+ * The Trust Zone support in the port must be disabled in order to run FreeRTOS
+ * on the secure side. The following are the valid configuration seetings:
+ *
+ * 1. Run FreeRTOS on the Secure Side:
+ *    configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
+ *
+ * 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
+ *    configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
+ *
+ * 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
+ *    configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
+ */
+#if ( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
+    #error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
+#endif
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the NVIC.
+ */
+#define portNVIC_SYSTICK_CTRL_REG             ( *( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG             ( *( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG    ( *( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_SHPR3_REG                    ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
+#define portNVIC_SYSTICK_ENABLE_BIT           ( 1UL << 0UL )
+#define portNVIC_SYSTICK_INT_BIT              ( 1UL << 1UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT       ( 1UL << 16UL )
+#define portMIN_INTERRUPT_PRIORITY            ( 255UL )
+#define portNVIC_PENDSV_PRI                   ( portMIN_INTERRUPT_PRIORITY << 16UL )
+#define portNVIC_SYSTICK_PRI                  ( portMIN_INTERRUPT_PRIORITY << 24UL )
+#ifndef configSYSTICK_CLOCK_HZ
+    #define configSYSTICK_CLOCK_HZ            configCPU_CLOCK_HZ
+    /* Ensure the SysTick is clocked at the same frequency as the core. */
+    #define portNVIC_SYSTICK_CLK_BIT          ( 1UL << 2UL )
+#else
+
+/* The way the SysTick is clocked is not modified in case it is not the
+ * same a the core. */
+    #define portNVIC_SYSTICK_CLK_BIT    ( 0 )
+#endif
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the SCB.
+ */
+#define portSCB_SYS_HANDLER_CTRL_STATE_REG    ( *( volatile uint32_t * ) 0xe000ed24 )
+#define portSCB_MEM_FAULT_ENABLE_BIT          ( 1UL << 16UL )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the FPU.
+ */
+#define portCPACR               ( ( volatile uint32_t * ) 0xe000ed88 )              /* Coprocessor Access Control Register. */
+#define portCPACR_CP10_VALUE    ( 3UL )
+#define portCPACR_CP11_VALUE    portCPACR_CP10_VALUE
+#define portCPACR_CP10_POS      ( 20UL )
+#define portCPACR_CP11_POS      ( 22UL )
+
+#define portFPCCR               ( ( volatile uint32_t * ) 0xe000ef34 )              /* Floating Point Context Control Register. */
+#define portFPCCR_ASPEN_POS     ( 31UL )
+#define portFPCCR_ASPEN_MASK    ( 1UL << portFPCCR_ASPEN_POS )
+#define portFPCCR_LSPEN_POS     ( 30UL )
+#define portFPCCR_LSPEN_MASK    ( 1UL << portFPCCR_LSPEN_POS )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the MPU.
+ */
+#define portMPU_TYPE_REG                      ( *( ( volatile uint32_t * ) 0xe000ed90 ) )
+#define portMPU_CTRL_REG                      ( *( ( volatile uint32_t * ) 0xe000ed94 ) )
+#define portMPU_RNR_REG                       ( *( ( volatile uint32_t * ) 0xe000ed98 ) )
+
+#define portMPU_RBAR_REG                      ( *( ( volatile uint32_t * ) 0xe000ed9c ) )
+#define portMPU_RLAR_REG                      ( *( ( volatile uint32_t * ) 0xe000eda0 ) )
+
+#define portMPU_RBAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda4 ) )
+#define portMPU_RLAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda8 ) )
+
+#define portMPU_RBAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edac ) )
+#define portMPU_RLAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edb0 ) )
+
+#define portMPU_RBAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb4 ) )
+#define portMPU_RLAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb8 ) )
+
+#define portMPU_MAIR0_REG                     ( *( ( volatile uint32_t * ) 0xe000edc0 ) )
+#define portMPU_MAIR1_REG                     ( *( ( volatile uint32_t * ) 0xe000edc4 ) )
+
+#define portMPU_RBAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
+#define portMPU_RLAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
+
+#define portMPU_MAIR_ATTR0_POS                ( 0UL )
+#define portMPU_MAIR_ATTR0_MASK               ( 0x000000ff )
+
+#define portMPU_MAIR_ATTR1_POS                ( 8UL )
+#define portMPU_MAIR_ATTR1_MASK               ( 0x0000ff00 )
+
+#define portMPU_MAIR_ATTR2_POS                ( 16UL )
+#define portMPU_MAIR_ATTR2_MASK               ( 0x00ff0000 )
+
+#define portMPU_MAIR_ATTR3_POS                ( 24UL )
+#define portMPU_MAIR_ATTR3_MASK               ( 0xff000000 )
+
+#define portMPU_MAIR_ATTR4_POS                ( 0UL )
+#define portMPU_MAIR_ATTR4_MASK               ( 0x000000ff )
+
+#define portMPU_MAIR_ATTR5_POS                ( 8UL )
+#define portMPU_MAIR_ATTR5_MASK               ( 0x0000ff00 )
+
+#define portMPU_MAIR_ATTR6_POS                ( 16UL )
+#define portMPU_MAIR_ATTR6_MASK               ( 0x00ff0000 )
+
+#define portMPU_MAIR_ATTR7_POS                ( 24UL )
+#define portMPU_MAIR_ATTR7_MASK               ( 0xff000000 )
+
+#define portMPU_RLAR_ATTR_INDEX0              ( 0UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX1              ( 1UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX2              ( 2UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX3              ( 3UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX4              ( 4UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX5              ( 5UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX6              ( 6UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX7              ( 7UL << 1UL )
+
+#define portMPU_RLAR_REGION_ENABLE            ( 1UL )
+
+/* Enable privileged access to unmapped region. */
+#define portMPU_PRIV_BACKGROUND_ENABLE_BIT    ( 1UL << 2UL )
+
+/* Enable MPU. */
+#define portMPU_ENABLE_BIT                    ( 1UL << 0UL )
+
+/* Expected value of the portMPU_TYPE register. */
+#define portEXPECTED_MPU_TYPE_VALUE           ( 8UL << 8UL ) /* 8 regions, unified. */
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief The maximum 24-bit number.
+ *
+ * It is needed because the systick is a 24-bit counter.
+ */
+#define portMAX_24_BIT_NUMBER       ( 0xffffffUL )
+
+/**
+ * @brief A fiddle factor to estimate the number of SysTick counts that would
+ * have occurred while the SysTick counter is stopped during tickless idle
+ * calculations.
+ */
+#define portMISSED_COUNTS_FACTOR    ( 45UL )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to set up the initial stack.
+ */
+#define portINITIAL_XPSR    ( 0x01000000 )
+
+#if ( configRUN_FREERTOS_SECURE_ONLY == 1 )
+
+/**
+ * @brief Initial EXC_RETURN value.
+ *
+ *     FF         FF         FF         FD
+ * 1111 1111  1111 1111  1111 1111  1111 1101
+ *
+ * Bit[6] - 1 --> The exception was taken from the Secure state.
+ * Bit[5] - 1 --> Do not skip stacking of additional state context.
+ * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
+ * Bit[3] - 1 --> Return to the Thread mode.
+ * Bit[2] - 1 --> Restore registers from the process stack.
+ * Bit[1] - 0 --> Reserved, 0.
+ * Bit[0] - 1 --> The exception was taken to the Secure state.
+ */
+    #define portINITIAL_EXC_RETURN    ( 0xfffffffd )
+#else
+
+/**
+ * @brief Initial EXC_RETURN value.
+ *
+ *     FF         FF         FF         BC
+ * 1111 1111  1111 1111  1111 1111  1011 1100
+ *
+ * Bit[6] - 0 --> The exception was taken from the Non-Secure state.
+ * Bit[5] - 1 --> Do not skip stacking of additional state context.
+ * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
+ * Bit[3] - 1 --> Return to the Thread mode.
+ * Bit[2] - 1 --> Restore registers from the process stack.
+ * Bit[1] - 0 --> Reserved, 0.
+ * Bit[0] - 0 --> The exception was taken to the Non-Secure state.
+ */
+    #define portINITIAL_EXC_RETURN    ( 0xffffffbc )
+#endif /* configRUN_FREERTOS_SECURE_ONLY */
+
+/**
+ * @brief CONTROL register privileged bit mask.
+ *
+ * Bit[0] in CONTROL register tells the privilege:
+ *  Bit[0] = 0 ==> The task is privileged.
+ *  Bit[0] = 1 ==> The task is not privileged.
+ */
+#define portCONTROL_PRIVILEGED_MASK         ( 1UL << 0UL )
+
+/**
+ * @brief Initial CONTROL register values.
+ */
+#define portINITIAL_CONTROL_UNPRIVILEGED    ( 0x3 )
+#define portINITIAL_CONTROL_PRIVILEGED      ( 0x2 )
+
+/**
+ * @brief Let the user override the pre-loading of the initial LR with the
+ * address of prvTaskExitError() in case it messes up unwinding of the stack
+ * in the debugger.
+ */
+#ifdef configTASK_RETURN_ADDRESS
+    #define portTASK_RETURN_ADDRESS    configTASK_RETURN_ADDRESS
+#else
+    #define portTASK_RETURN_ADDRESS    prvTaskExitError
+#endif
+
+/**
+ * @brief If portPRELOAD_REGISTERS then registers will be given an initial value
+ * when a task is created. This helps in debugging at the cost of code size.
+ */
+#define portPRELOAD_REGISTERS    1
+
+/**
+ * @brief A task is created without a secure context, and must call
+ * portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
+ * any secure calls.
+ */
+#define portNO_SECURE_CONTEXT    0
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Used to catch tasks that attempt to return from their implementing
+ * function.
+ */
+static void prvTaskExitError( void );
+
+#if ( configENABLE_MPU == 1 )
+
+/**
+ * @brief Setup the Memory Protection Unit (MPU).
+ */
+    static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
+#endif /* configENABLE_MPU */
+
+#if ( configENABLE_FPU == 1 )
+
+/**
+ * @brief Setup the Floating Point Unit (FPU).
+ */
+    static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
+#endif /* configENABLE_FPU */
+
+/**
+ * @brief Setup the timer to generate the tick interrupts.
+ *
+ * The implementation in this file is weak to allow application writers to
+ * change the timer used to generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Checks whether the current execution context is interrupt.
+ *
+ * @return pdTRUE if the current execution context is interrupt, pdFALSE
+ * otherwise.
+ */
+BaseType_t xPortIsInsideInterrupt( void );
+
+/**
+ * @brief Yield the processor.
+ */
+void vPortYield( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Enter critical section.
+ */
+void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Exit from critical section.
+ */
+void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief SysTick handler.
+ */
+void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief C part of SVC handler.
+ */
+portDONT_DISCARD void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) PRIVILEGED_FUNCTION;
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Each task maintains its own interrupt status in the critical nesting
+ * variable.
+ */
+PRIVILEGED_DATA static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
+
+#if ( configENABLE_TRUSTZONE == 1 )
+
+/**
+ * @brief Saved as part of the task context to indicate which context the
+ * task is using on the secure side.
+ */
+    PRIVILEGED_DATA portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
+#endif /* configENABLE_TRUSTZONE */
+
+#if ( configUSE_TICKLESS_IDLE == 1 )
+
+/**
+ * @brief The number of SysTick increments that make up one tick period.
+ */
+    PRIVILEGED_DATA static uint32_t ulTimerCountsForOneTick = 0;
+
+/**
+ * @brief The maximum number of tick periods that can be suppressed is
+ * limited by the 24 bit resolution of the SysTick timer.
+ */
+    PRIVILEGED_DATA static uint32_t xMaximumPossibleSuppressedTicks = 0;
+
+/**
+ * @brief Compensate for the CPU cycles that pass while the SysTick is
+ * stopped (low power functionality only).
+ */
+    PRIVILEGED_DATA static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TICKLESS_IDLE == 1 )
+    __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+    {
+        uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
+        TickType_t xModifiableIdleTime;
+
+        /* Make sure the SysTick reload value does not overflow the counter. */
+        if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+        {
+            xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+        }
+
+        /* Stop the SysTick momentarily. The time the SysTick is stopped for is
+         * accounted for as best it can be, but using the tickless mode will
+         * inevitably result in some tiny drift of the time maintained by the
+         * kernel with respect to calendar time. */
+        portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+        /* Calculate the reload value required to wait xExpectedIdleTime
+         * tick periods. -1 is used because this code will execute part way
+         * through one of the tick periods. */
+        ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+
+        if( ulReloadValue > ulStoppedTimerCompensation )
+        {
+            ulReloadValue -= ulStoppedTimerCompensation;
+        }
+
+        /* Enter a critical section but don't use the taskENTER_CRITICAL()
+         * method as that will mask interrupts that should exit sleep mode. */
+        __asm volatile ( "cpsid i" ::: "memory" );
+        __asm volatile ( "dsb" );
+        __asm volatile ( "isb" );
+
+        /* If a context switch is pending or a task is waiting for the scheduler
+         * to be un-suspended then abandon the low power entry. */
+        if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+        {
+            /* Restart from whatever is left in the count register to complete
+             * this tick period. */
+            portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Reset the reload register to the value required for normal tick
+             * periods. */
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Re-enable interrupts - see comments above the cpsid instruction()
+             * above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+        else
+        {
+            /* Set the new reload value. */
+            portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+            /* Clear the SysTick count flag and set the count value back to
+             * zero. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
+             * set its parameter to 0 to indicate that its implementation
+             * contains its own wait for interrupt or wait for event
+             * instruction, and so wfi should not be executed again. However,
+             * the original expected idle time variable must remain unmodified,
+             * so a copy is taken. */
+            xModifiableIdleTime = xExpectedIdleTime;
+            configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+
+            if( xModifiableIdleTime > 0 )
+            {
+                __asm volatile ( "dsb" ::: "memory" );
+                __asm volatile ( "wfi" );
+                __asm volatile ( "isb" );
+            }
+
+            configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+            /* Re-enable interrupts to allow the interrupt that brought the MCU
+             * out of sleep mode to execute immediately. See comments above
+             * the cpsid instruction above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable interrupts again because the clock is about to be stopped
+             * and interrupts that execute while the clock is stopped will
+             * increase any slippage between the time maintained by the RTOS and
+             * calendar time. */
+            __asm volatile ( "cpsid i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable the SysTick clock without reading the
+             * portNVIC_SYSTICK_CTRL_REG register to ensure the
+             * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.
+             * Again, the time the SysTick is stopped for is accounted for as
+             * best it can be, but using the tickless mode will inevitably
+             * result in some tiny drift of the time maintained by the kernel
+             * with respect to calendar time*/
+            portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
+
+            /* Determine if the SysTick clock has already counted to zero and
+             * been set back to the current reload value (the reload back being
+             * correct for the entire expected idle time) or if the SysTick is
+             * yet to count to zero (in which case an interrupt other than the
+             * SysTick must have brought the system out of sleep mode). */
+            if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+            {
+                uint32_t ulCalculatedLoadValue;
+
+                /* The tick interrupt is already pending, and the SysTick count
+                 * reloaded with ulReloadValue.  Reset the
+                 * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+                 * period. */
+                ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+                /* Don't allow a tiny value, or values that have somehow
+                 * underflowed because the post sleep hook did something
+                 * that took too long. */
+                if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+                {
+                    ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+                }
+
+                portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+                /* As the pending tick will be processed as soon as this
+                 * function exits, the tick value maintained by the tick is
+                 * stepped forward by one less than the time spent waiting. */
+                ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+            }
+            else
+            {
+                /* Something other than the tick interrupt ended the sleep.
+                 * Work out how long the sleep lasted rounded to complete tick
+                 * periods (not the ulReload value which accounted for part
+                 * ticks). */
+                ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+                /* How many complete tick periods passed while the processor
+                 * was waiting? */
+                ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+                /* The reload value is set to whatever fraction of a single tick
+                 * period remains. */
+                portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+            }
+
+            /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+             * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+             * value. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+            vTaskStepTick( ulCompleteTickPeriods );
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Exit with interrupts enabled. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+    }
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Calculate the constants required to configure the tick interrupt. */
+    #if ( configUSE_TICKLESS_IDLE == 1 )
+        {
+            ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
+            xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+            ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
+        }
+    #endif /* configUSE_TICKLESS_IDLE */
+
+    /* Stop and reset the SysTick. */
+    portNVIC_SYSTICK_CTRL_REG = 0UL;
+    portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+    /* Configure SysTick to interrupt at the requested rate. */
+    portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+    portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+    volatile uint32_t ulDummy = 0UL;
+
+    /* A function that implements a task must not exit or attempt to return to
+     * its caller as there is nothing to return to. If a task wants to exit it
+     * should instead call vTaskDelete( NULL ). Artificially force an assert()
+     * to be triggered if configASSERT() is defined, then stop here so
+     * application writers can catch the error. */
+    configASSERT( ulCriticalNesting == ~0UL );
+    portDISABLE_INTERRUPTS();
+
+    while( ulDummy == 0 )
+    {
+        /* This file calls prvTaskExitError() after the scheduler has been
+         * started to remove a compiler warning about the function being
+         * defined but never called.  ulDummy is used purely to quieten other
+         * warnings about code appearing after this function is called - making
+         * ulDummy volatile makes the compiler think the function could return
+         * and therefore not output an 'unreachable code' warning for code that
+         * appears after it. */
+    }
+}
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_MPU == 1 )
+    static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
+    {
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __privileged_functions_start__;
+            extern uint32_t * __privileged_functions_end__;
+            extern uint32_t * __syscalls_flash_start__;
+            extern uint32_t * __syscalls_flash_end__;
+            extern uint32_t * __unprivileged_flash_start__;
+            extern uint32_t * __unprivileged_flash_end__;
+            extern uint32_t * __privileged_sram_start__;
+            extern uint32_t * __privileged_sram_end__;
+        #else /* if defined( __ARMCC_VERSION ) */
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __privileged_functions_start__[];
+            extern uint32_t __privileged_functions_end__[];
+            extern uint32_t __syscalls_flash_start__[];
+            extern uint32_t __syscalls_flash_end__[];
+            extern uint32_t __unprivileged_flash_start__[];
+            extern uint32_t __unprivileged_flash_end__[];
+            extern uint32_t __privileged_sram_start__[];
+            extern uint32_t __privileged_sram_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+
+        /* Check that the MPU is present. */
+        if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
+        {
+            /* MAIR0 - Index 0. */
+            portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
+            /* MAIR0 - Index 1. */
+            portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
+
+            /* Setup privileged flash as Read Only so that privileged tasks can
+             * read it but not modify. */
+            portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_PRIVILEGED_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup unprivileged flash as Read Only by both privileged and
+             * unprivileged tasks. All tasks can read it but no-one can modify. */
+            portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup unprivileged syscalls flash as Read Only by both privileged
+             * and unprivileged tasks. All tasks can read it but no-one can modify. */
+            portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup RAM containing kernel data for privileged access only. */
+            portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
+                               ( portMPU_REGION_EXECUTE_NEVER );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Enable mem fault. */
+            portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE_BIT;
+
+            /* Enable MPU with privileged background access i.e. unmapped
+             * regions have privileged access. */
+            portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE_BIT | portMPU_ENABLE_BIT );
+        }
+    }
+#endif /* configENABLE_MPU */
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_FPU == 1 )
+    static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
+    {
+        #if ( configENABLE_TRUSTZONE == 1 )
+            {
+                /* Enable non-secure access to the FPU. */
+                SecureInit_EnableNSFPUAccess();
+            }
+        #endif /* configENABLE_TRUSTZONE */
+
+        /* CP10 = 11 ==> Full access to FPU i.e. both privileged and
+         * unprivileged code should be able to access FPU. CP11 should be
+         * programmed to the same value as CP10. */
+        *( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
+                            ( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
+                            );
+
+        /* ASPEN = 1 ==> Hardware should automatically preserve floating point
+         * context on exception entry and restore on exception return.
+         * LSPEN = 1 ==> Enable lazy context save of FP state. */
+        *( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
+    }
+#endif /* configENABLE_FPU */
+/*-----------------------------------------------------------*/
+
+void vPortYield( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Set a PendSV to request a context switch. */
+    portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+
+    /* Barriers are normally not required but do ensure the code is
+     * completely within the specified behaviour for the architecture. */
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
+{
+    portDISABLE_INTERRUPTS();
+    ulCriticalNesting++;
+
+    /* Barriers are normally not required but do ensure the code is
+     * completely within the specified behaviour for the architecture. */
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
+{
+    configASSERT( ulCriticalNesting );
+    ulCriticalNesting--;
+
+    if( ulCriticalNesting == 0 )
+    {
+        portENABLE_INTERRUPTS();
+    }
+}
+/*-----------------------------------------------------------*/
+
+void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
+{
+    uint32_t ulPreviousMask;
+
+    ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
+    {
+        /* Increment the RTOS tick. */
+        if( xTaskIncrementTick() != pdFALSE )
+        {
+            /* Pend a context switch. */
+            portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+        }
+    }
+    portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
+}
+/*-----------------------------------------------------------*/
+
+void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
+{
+    #if ( configENABLE_MPU == 1 )
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __syscalls_flash_start__;
+            extern uint32_t * __syscalls_flash_end__;
+        #else
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __syscalls_flash_start__[];
+            extern uint32_t __syscalls_flash_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+    #endif /* configENABLE_MPU */
+
+    uint32_t ulPC;
+
+    #if ( configENABLE_TRUSTZONE == 1 )
+        uint32_t ulR0;
+        #if ( configENABLE_MPU == 1 )
+            uint32_t ulControl, ulIsTaskPrivileged;
+        #endif /* configENABLE_MPU */
+    #endif /* configENABLE_TRUSTZONE */
+    uint8_t ucSVCNumber;
+
+    /* Register are stored on the stack in the following order - R0, R1, R2, R3,
+     * R12, LR, PC, xPSR. */
+    ulPC = pulCallerStackAddress[ 6 ];
+    ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ];
+
+    switch( ucSVCNumber )
+    {
+        #if ( configENABLE_TRUSTZONE == 1 )
+            case portSVC_ALLOCATE_SECURE_CONTEXT:
+
+                /* R0 contains the stack size passed as parameter to the
+                 * vPortAllocateSecureContext function. */
+                ulR0 = pulCallerStackAddress[ 0 ];
+
+                #if ( configENABLE_MPU == 1 )
+                    {
+                        /* Read the CONTROL register value. */
+                        __asm volatile ( "mrs %0, control"  : "=r" ( ulControl ) );
+
+                        /* The task that raised the SVC is privileged if Bit[0]
+                         * in the CONTROL register is 0. */
+                        ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
+
+                        /* Allocate and load a context for the secure task. */
+                        xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
+                    }
+                #else /* if ( configENABLE_MPU == 1 ) */
+                    {
+                        /* Allocate and load a context for the secure task. */
+                        xSecureContext = SecureContext_AllocateContext( ulR0 );
+                    }
+                #endif /* configENABLE_MPU */
+
+                configASSERT( xSecureContext != NULL );
+                SecureContext_LoadContext( xSecureContext );
+                break;
+
+            case portSVC_FREE_SECURE_CONTEXT:
+                /* R0 contains the secure context handle to be freed. */
+                ulR0 = pulCallerStackAddress[ 0 ];
+
+                /* Free the secure context. */
+                SecureContext_FreeContext( ( SecureContextHandle_t ) ulR0 );
+                break;
+        #endif /* configENABLE_TRUSTZONE */
+
+        case portSVC_START_SCHEDULER:
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    /* De-prioritize the non-secure exceptions so that the
+                     * non-secure pendSV runs at the lowest priority. */
+                    SecureInit_DePrioritizeNSExceptions();
+
+                    /* Initialize the secure context management system. */
+                    SecureContext_Init();
+                }
+            #endif /* configENABLE_TRUSTZONE */
+
+            #if ( configENABLE_FPU == 1 )
+                {
+                    /* Setup the Floating Point Unit (FPU). */
+                    prvSetupFPU();
+                }
+            #endif /* configENABLE_FPU */
+
+            /* Setup the context of the first task so that the first task starts
+             * executing. */
+            vRestoreContextOfFirstTask();
+            break;
+
+            #if ( configENABLE_MPU == 1 )
+                case portSVC_RAISE_PRIVILEGE:
+
+                    /* Only raise the privilege, if the svc was raised from any of
+                     * the system calls. */
+                    if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) &&
+                        ( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) )
+                    {
+                        vRaisePrivilege();
+                    }
+                    break;
+            #endif /* configENABLE_MPU */
+
+        default:
+            /* Incorrect SVC call. */
+            configASSERT( pdFALSE );
+    }
+}
+/*-----------------------------------------------------------*/
+/* *INDENT-OFF* */
+#if ( configENABLE_MPU == 1 )
+    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
+                                         StackType_t * pxEndOfStack,
+                                         TaskFunction_t pxCode,
+                                         void * pvParameters,
+                                         BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
+#else
+    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
+                                         StackType_t * pxEndOfStack,
+                                         TaskFunction_t pxCode,
+                                         void * pvParameters ) /* PRIVILEGED_FUNCTION */
+#endif /* configENABLE_MPU */
+/* *INDENT-ON* */
+{
+    /* Simulate the stack frame as it would be created by a context switch
+     * interrupt. */
+    #if ( portPRELOAD_REGISTERS == 0 )
+        {
+            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+            pxTopOfStack -= 5;                                       /* R12, R3, R2 and R1. */
+            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
+            pxTopOfStack -= 9;                                       /* R11..R4, EXC_RETURN. */
+            *pxTopOfStack = portINITIAL_EXC_RETURN;
+
+            #if ( configENABLE_MPU == 1 )
+                {
+                    pxTopOfStack--;
+
+                    if( xRunPrivileged == pdTRUE )
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                    else
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                }
+            #endif /* configENABLE_MPU */
+
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
+
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    pxTopOfStack--;
+                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
+                }
+            #endif /* configENABLE_TRUSTZONE */
+        }
+    #else /* portPRELOAD_REGISTERS */
+        {
+            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x12121212UL;            /* R12 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x03030303UL;            /* R3 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x02020202UL;            /* R2 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x01010101UL;            /* R1 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x11111111UL;            /* R11 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x10101010UL;            /* R10 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x09090909UL;            /* R09 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x08080808UL;            /* R08 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x07070707UL;            /* R07 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x06060606UL;            /* R06 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x05050505UL;            /* R05 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x04040404UL;            /* R04 */
+            pxTopOfStack--;
+            *pxTopOfStack = portINITIAL_EXC_RETURN;                  /* EXC_RETURN */
+
+            #if ( configENABLE_MPU == 1 )
+                {
+                    pxTopOfStack--;
+
+                    if( xRunPrivileged == pdTRUE )
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                    else
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                }
+            #endif /* configENABLE_MPU */
+
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
+
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    pxTopOfStack--;
+                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
+                }
+            #endif /* configENABLE_TRUSTZONE */
+        }
+    #endif /* portPRELOAD_REGISTERS */
+
+    return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Make PendSV, CallSV and SysTick the same priority as the kernel. */
+    portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
+    portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
+
+    #if ( configENABLE_MPU == 1 )
+        {
+            /* Setup the Memory Protection Unit (MPU). */
+            prvSetupMPU();
+        }
+    #endif /* configENABLE_MPU */
+
+    /* Start the timer that generates the tick ISR. Interrupts are disabled
+     * here already. */
+    vPortSetupTimerInterrupt();
+
+    /* Initialize the critical nesting count ready for the first task. */
+    ulCriticalNesting = 0;
+
+    /* Start the first task. */
+    vStartFirstTask();
+
+    /* Should never get here as the tasks will now be executing. Call the task
+     * exit error function to prevent compiler warnings about a static function
+     * not being called in the case that the application writer overrides this
+     * functionality by defining configTASK_RETURN_ADDRESS. Call
+     * vTaskSwitchContext() so link time optimization does not remove the
+     * symbol. */
+    vTaskSwitchContext();
+    prvTaskExitError();
+
+    /* Should not get here. */
+    return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Not implemented in ports where there is nothing to return to.
+     * Artificially force an assert. */
+    configASSERT( ulCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_MPU == 1 )
+    void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
+                                    const struct xMEMORY_REGION * const xRegions,
+                                    StackType_t * pxBottomOfStack,
+                                    uint32_t ulStackDepth )
+    {
+        uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
+        int32_t lIndex = 0;
+
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __privileged_sram_start__;
+            extern uint32_t * __privileged_sram_end__;
+        #else
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __privileged_sram_start__[];
+            extern uint32_t __privileged_sram_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+
+        /* Setup MAIR0. */
+        xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
+        xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
+
+        /* This function is called automatically when the task is created - in
+         * which case the stack region parameters will be valid.  At all other
+         * times the stack parameters will not be valid and it is assumed that
+         * the stack region has already been configured. */
+        if( ulStackDepth > 0 )
+        {
+            ulRegionStartAddress = ( uint32_t ) pxBottomOfStack;
+            ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) - 1;
+
+            /* If the stack is within the privileged SRAM, do not protect it
+             * using a separate MPU region. This is needed because privileged
+             * SRAM is already protected using an MPU region and ARMv8-M does
+             * not allow overlapping MPU regions. */
+            if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
+                ( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
+            {
+                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
+                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
+            }
+            else
+            {
+                /* Define the region that allows access to the stack. */
+                ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
+                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
+
+                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
+                                                             ( portMPU_REGION_NON_SHAREABLE ) |
+                                                             ( portMPU_REGION_READ_WRITE ) |
+                                                             ( portMPU_REGION_EXECUTE_NEVER );
+
+                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
+                                                             ( portMPU_RLAR_ATTR_INDEX0 ) |
+                                                             ( portMPU_RLAR_REGION_ENABLE );
+            }
+        }
+
+        /* User supplied configurable regions. */
+        for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
+        {
+            /* If xRegions is NULL i.e. the task has not specified any MPU
+             * region, the else part ensures that all the configurable MPU
+             * regions are invalidated. */
+            if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
+            {
+                /* Translate the generic region definition contained in xRegions
+                 * into the ARMv8 specific MPU settings that are then stored in
+                 * xMPUSettings. */
+                ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
+                ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
+                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
+
+                /* Start address. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
+                                                                          ( portMPU_REGION_NON_SHAREABLE );
+
+                /* RO/RW. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
+                }
+                else
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
+                }
+
+                /* XN. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
+                }
+
+                /* End Address. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
+                                                                          ( portMPU_RLAR_REGION_ENABLE );
+
+                /* Normal memory/ Device memory. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
+                {
+                    /* Attr1 in MAIR0 is configured as device memory. */
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
+                }
+                else
+                {
+                    /* Attr1 in MAIR0 is configured as normal memory. */
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
+                }
+            }
+            else
+            {
+                /* Invalidate the region. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
+            }
+
+            lIndex++;
+        }
+    }
+#endif /* configENABLE_MPU */
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortIsInsideInterrupt( void )
+{
+    uint32_t ulCurrentInterrupt;
+    BaseType_t xReturn;
+
+    /* Obtain the number of the currently executing interrupt. Interrupt Program
+     * Status Register (IPSR) holds the exception number of the currently-executing
+     * exception or zero for Thread mode.*/
+    __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
+
+    if( ulCurrentInterrupt == 0 )
+    {
+        xReturn = pdFALSE;
+    }
+    else
+    {
+        xReturn = pdTRUE;
+    }
+
+    return xReturn;
+}
+/*-----------------------------------------------------------*/
diff --git a/portable/CCS/ARM_CM3/port.c b/portable/CCS/ARM_CM3/port.c
index e433dce..eb65c9a 100644
--- a/portable/CCS/ARM_CM3/port.c
+++ b/portable/CCS/ARM_CM3/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/CCS/ARM_CM4F/port.c b/portable/CCS/ARM_CM4F/port.c
index cbc84e4..64271c9 100644
--- a/portable/CCS/ARM_CM4F/port.c
+++ b/portable/CCS/ARM_CM4F/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/Common/mpu_wrappers.c b/portable/Common/mpu_wrappers.c
index c29bd28..afbf614 100644
--- a/portable/Common/mpu_wrappers.c
+++ b/portable/Common/mpu_wrappers.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*
diff --git a/portable/GCC/ARM_CM0/port.c b/portable/GCC/ARM_CM0/port.c
index e5b500a..f1c0e00 100644
--- a/portable/GCC/ARM_CM0/port.c
+++ b/portable/GCC/ARM_CM0/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/GCC/ARM_CM23/non_secure/port.c b/portable/GCC/ARM_CM23/non_secure/port.c
index 9ee28cd..01c4600 100644
--- a/portable/GCC/ARM_CM23/non_secure/port.c
+++ b/portable/GCC/ARM_CM23/non_secure/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
diff --git a/portable/GCC/ARM_CM23_NTZ/non_secure/port.c b/portable/GCC/ARM_CM23_NTZ/non_secure/port.c
index 4d483d4..d779c64 100644
--- a/portable/GCC/ARM_CM23_NTZ/non_secure/port.c
+++ b/portable/GCC/ARM_CM23_NTZ/non_secure/port.c
@@ -1,1194 +1,1193 @@
-/*
- * FreeRTOS Kernel V10.3.1
- * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
- * all the API functions to use the MPU wrappers. That should only be done when
- * task.h is included from an application file. */
-#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
-
-/* Scheduler includes. */
-#include "FreeRTOS.h"
-#include "task.h"
-
-/* MPU wrappers includes. */
-#include "mpu_wrappers.h"
-
-/* Portasm includes. */
-#include "portasm.h"
-
-#if ( configENABLE_TRUSTZONE == 1 )
-    /* Secure components includes. */
-    #include "secure_context.h"
-    #include "secure_init.h"
-#endif /* configENABLE_TRUSTZONE */
-
-#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
-
-/**
- * The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
- * i.e. the processor boots as secure and never jumps to the non-secure side.
- * The Trust Zone support in the port must be disabled in order to run FreeRTOS
- * on the secure side. The following are the valid configuration seetings:
- *
- * 1. Run FreeRTOS on the Secure Side:
- *      configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
- *
- * 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
- *      configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
- *
- * 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
- *      configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
- */
-#if ( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
-    #error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
-#endif
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the NVIC.
- */
-#define portNVIC_SYSTICK_CTRL_REG             ( *( ( volatile uint32_t * ) 0xe000e010 ) )
-#define portNVIC_SYSTICK_LOAD_REG             ( *( ( volatile uint32_t * ) 0xe000e014 ) )
-#define portNVIC_SYSTICK_CURRENT_VALUE_REG    ( *( ( volatile uint32_t * ) 0xe000e018 ) )
-#define portNVIC_SHPR3_REG                    ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
-#define portNVIC_SYSTICK_ENABLE_BIT           ( 1UL << 0UL )
-#define portNVIC_SYSTICK_INT_BIT              ( 1UL << 1UL )
-#define portNVIC_SYSTICK_COUNT_FLAG_BIT       ( 1UL << 16UL )
-#define portMIN_INTERRUPT_PRIORITY            ( 255UL )
-#define portNVIC_PENDSV_PRI                   ( portMIN_INTERRUPT_PRIORITY << 16UL )
-#define portNVIC_SYSTICK_PRI                  ( portMIN_INTERRUPT_PRIORITY << 24UL )
-#ifndef configSYSTICK_CLOCK_HZ
-    #define configSYSTICK_CLOCK_HZ            configCPU_CLOCK_HZ
-    /* Ensure the SysTick is clocked at the same frequency as the core. */
-    #define portNVIC_SYSTICK_CLK_BIT          ( 1UL << 2UL )
-#else
-
-/* The way the SysTick is clocked is not modified in case it is not the
- * same a the core. */
-    #define portNVIC_SYSTICK_CLK_BIT    ( 0 )
-#endif
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the SCB.
- */
-#define portSCB_SYS_HANDLER_CTRL_STATE_REG    ( *( volatile uint32_t * ) 0xe000ed24 )
-#define portSCB_MEM_FAULT_ENABLE_BIT          ( 1UL << 16UL )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the FPU.
- */
-#define portCPACR               ( ( volatile uint32_t * ) 0xe000ed88 )              /* Coprocessor Access Control Register. */
-#define portCPACR_CP10_VALUE    ( 3UL )
-#define portCPACR_CP11_VALUE    portCPACR_CP10_VALUE
-#define portCPACR_CP10_POS      ( 20UL )
-#define portCPACR_CP11_POS      ( 22UL )
-
-#define portFPCCR               ( ( volatile uint32_t * ) 0xe000ef34 )              /* Floating Point Context Control Register. */
-#define portFPCCR_ASPEN_POS     ( 31UL )
-#define portFPCCR_ASPEN_MASK    ( 1UL << portFPCCR_ASPEN_POS )
-#define portFPCCR_LSPEN_POS     ( 30UL )
-#define portFPCCR_LSPEN_MASK    ( 1UL << portFPCCR_LSPEN_POS )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the MPU.
- */
-#define portMPU_TYPE_REG                      ( *( ( volatile uint32_t * ) 0xe000ed90 ) )
-#define portMPU_CTRL_REG                      ( *( ( volatile uint32_t * ) 0xe000ed94 ) )
-#define portMPU_RNR_REG                       ( *( ( volatile uint32_t * ) 0xe000ed98 ) )
-
-#define portMPU_RBAR_REG                      ( *( ( volatile uint32_t * ) 0xe000ed9c ) )
-#define portMPU_RLAR_REG                      ( *( ( volatile uint32_t * ) 0xe000eda0 ) )
-
-#define portMPU_RBAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda4 ) )
-#define portMPU_RLAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda8 ) )
-
-#define portMPU_RBAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edac ) )
-#define portMPU_RLAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edb0 ) )
-
-#define portMPU_RBAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb4 ) )
-#define portMPU_RLAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb8 ) )
-
-#define portMPU_MAIR0_REG                     ( *( ( volatile uint32_t * ) 0xe000edc0 ) )
-#define portMPU_MAIR1_REG                     ( *( ( volatile uint32_t * ) 0xe000edc4 ) )
-
-#define portMPU_RBAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
-#define portMPU_RLAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
-
-#define portMPU_MAIR_ATTR0_POS                ( 0UL )
-#define portMPU_MAIR_ATTR0_MASK               ( 0x000000ff )
-
-#define portMPU_MAIR_ATTR1_POS                ( 8UL )
-#define portMPU_MAIR_ATTR1_MASK               ( 0x0000ff00 )
-
-#define portMPU_MAIR_ATTR2_POS                ( 16UL )
-#define portMPU_MAIR_ATTR2_MASK               ( 0x00ff0000 )
-
-#define portMPU_MAIR_ATTR3_POS                ( 24UL )
-#define portMPU_MAIR_ATTR3_MASK               ( 0xff000000 )
-
-#define portMPU_MAIR_ATTR4_POS                ( 0UL )
-#define portMPU_MAIR_ATTR4_MASK               ( 0x000000ff )
-
-#define portMPU_MAIR_ATTR5_POS                ( 8UL )
-#define portMPU_MAIR_ATTR5_MASK               ( 0x0000ff00 )
-
-#define portMPU_MAIR_ATTR6_POS                ( 16UL )
-#define portMPU_MAIR_ATTR6_MASK               ( 0x00ff0000 )
-
-#define portMPU_MAIR_ATTR7_POS                ( 24UL )
-#define portMPU_MAIR_ATTR7_MASK               ( 0xff000000 )
-
-#define portMPU_RLAR_ATTR_INDEX0              ( 0UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX1              ( 1UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX2              ( 2UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX3              ( 3UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX4              ( 4UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX5              ( 5UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX6              ( 6UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX7              ( 7UL << 1UL )
-
-#define portMPU_RLAR_REGION_ENABLE            ( 1UL )
-
-/* Enable privileged access to unmapped region. */
-#define portMPU_PRIV_BACKGROUND_ENABLE_BIT    ( 1UL << 2UL )
-
-/* Enable MPU. */
-#define portMPU_ENABLE_BIT                    ( 1UL << 0UL )
-
-/* Expected value of the portMPU_TYPE register. */
-#define portEXPECTED_MPU_TYPE_VALUE           ( 8UL << 8UL ) /* 8 regions, unified. */
-/*-----------------------------------------------------------*/
-
-/**
- * @brief The maximum 24-bit number.
- *
- * It is needed because the systick is a 24-bit counter.
- */
-#define portMAX_24_BIT_NUMBER       ( 0xffffffUL )
-
-/**
- * @brief A fiddle factor to estimate the number of SysTick counts that would
- * have occurred while the SysTick counter is stopped during tickless idle
- * calculations.
- */
-#define portMISSED_COUNTS_FACTOR    ( 45UL )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to set up the initial stack.
- */
-#define portINITIAL_XPSR    ( 0x01000000 )
-
-#if ( configRUN_FREERTOS_SECURE_ONLY == 1 )
-
-/**
- * @brief Initial EXC_RETURN value.
- *
- *     FF         FF         FF         FD
- * 1111 1111  1111 1111  1111 1111  1111 1101
- *
- * Bit[6] - 1 --> The exception was taken from the Secure state.
- * Bit[5] - 1 --> Do not skip stacking of additional state context.
- * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
- * Bit[3] - 1 --> Return to the Thread mode.
- * Bit[2] - 1 --> Restore registers from the process stack.
- * Bit[1] - 0 --> Reserved, 0.
- * Bit[0] - 1 --> The exception was taken to the Secure state.
- */
-    #define portINITIAL_EXC_RETURN    ( 0xfffffffd )
-#else
-
-/**
- * @brief Initial EXC_RETURN value.
- *
- *     FF         FF         FF         BC
- * 1111 1111  1111 1111  1111 1111  1011 1100
- *
- * Bit[6] - 0 --> The exception was taken from the Non-Secure state.
- * Bit[5] - 1 --> Do not skip stacking of additional state context.
- * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
- * Bit[3] - 1 --> Return to the Thread mode.
- * Bit[2] - 1 --> Restore registers from the process stack.
- * Bit[1] - 0 --> Reserved, 0.
- * Bit[0] - 0 --> The exception was taken to the Non-Secure state.
- */
-    #define portINITIAL_EXC_RETURN    ( 0xffffffbc )
-#endif /* configRUN_FREERTOS_SECURE_ONLY */
-
-/**
- * @brief CONTROL register privileged bit mask.
- *
- * Bit[0] in CONTROL register tells the privilege:
- *  Bit[0] = 0 ==> The task is privileged.
- *  Bit[0] = 1 ==> The task is not privileged.
- */
-#define portCONTROL_PRIVILEGED_MASK         ( 1UL << 0UL )
-
-/**
- * @brief Initial CONTROL register values.
- */
-#define portINITIAL_CONTROL_UNPRIVILEGED    ( 0x3 )
-#define portINITIAL_CONTROL_PRIVILEGED      ( 0x2 )
-
-/**
- * @brief Let the user override the pre-loading of the initial LR with the
- * address of prvTaskExitError() in case it messes up unwinding of the stack
- * in the debugger.
- */
-#ifdef configTASK_RETURN_ADDRESS
-    #define portTASK_RETURN_ADDRESS    configTASK_RETURN_ADDRESS
-#else
-    #define portTASK_RETURN_ADDRESS    prvTaskExitError
-#endif
-
-/**
- * @brief If portPRELOAD_REGISTERS then registers will be given an initial value
- * when a task is created. This helps in debugging at the cost of code size.
- */
-#define portPRELOAD_REGISTERS    1
-
-/**
- * @brief A task is created without a secure context, and must call
- * portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
- * any secure calls.
- */
-#define portNO_SECURE_CONTEXT    0
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Used to catch tasks that attempt to return from their implementing
- * function.
- */
-static void prvTaskExitError( void );
-
-#if ( configENABLE_MPU == 1 )
-
-/**
- * @brief Setup the Memory Protection Unit (MPU).
- */
-    static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
-#endif /* configENABLE_MPU */
-
-#if ( configENABLE_FPU == 1 )
-
-/**
- * @brief Setup the Floating Point Unit (FPU).
- */
-    static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
-#endif /* configENABLE_FPU */
-
-/**
- * @brief Setup the timer to generate the tick interrupts.
- *
- * The implementation in this file is weak to allow application writers to
- * change the timer used to generate the tick interrupt.
- */
-void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Checks whether the current execution context is interrupt.
- *
- * @return pdTRUE if the current execution context is interrupt, pdFALSE
- * otherwise.
- */
-BaseType_t xPortIsInsideInterrupt( void );
-
-/**
- * @brief Yield the processor.
- */
-void vPortYield( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Enter critical section.
- */
-void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Exit from critical section.
- */
-void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief SysTick handler.
- */
-void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief C part of SVC handler.
- */
-portDONT_DISCARD void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) PRIVILEGED_FUNCTION;
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Each task maintains its own interrupt status in the critical nesting
- * variable.
- */
-PRIVILEGED_DATA static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
-
-#if ( configENABLE_TRUSTZONE == 1 )
-
-/**
- * @brief Saved as part of the task context to indicate which context the
- * task is using on the secure side.
- */
-    PRIVILEGED_DATA portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
-#endif /* configENABLE_TRUSTZONE */
-
-#if ( configUSE_TICKLESS_IDLE == 1 )
-
-/**
- * @brief The number of SysTick increments that make up one tick period.
- */
-    PRIVILEGED_DATA static uint32_t ulTimerCountsForOneTick = 0;
-
-/**
- * @brief The maximum number of tick periods that can be suppressed is
- * limited by the 24 bit resolution of the SysTick timer.
- */
-    PRIVILEGED_DATA static uint32_t xMaximumPossibleSuppressedTicks = 0;
-
-/**
- * @brief Compensate for the CPU cycles that pass while the SysTick is
- * stopped (low power functionality only).
- */
-    PRIVILEGED_DATA static uint32_t ulStoppedTimerCompensation = 0;
-#endif /* configUSE_TICKLESS_IDLE */
-/*-----------------------------------------------------------*/
-
-#if ( configUSE_TICKLESS_IDLE == 1 )
-    __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
-    {
-        uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
-        TickType_t xModifiableIdleTime;
-
-        /* Make sure the SysTick reload value does not overflow the counter. */
-        if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
-        {
-            xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
-        }
-
-        /* Stop the SysTick momentarily. The time the SysTick is stopped for is
-         * accounted for as best it can be, but using the tickless mode will
-         * inevitably result in some tiny drift of the time maintained by the
-         * kernel with respect to calendar time. */
-        portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
-
-        /* Calculate the reload value required to wait xExpectedIdleTime
-         * tick periods. -1 is used because this code will execute part way
-         * through one of the tick periods. */
-        ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
-
-        if( ulReloadValue > ulStoppedTimerCompensation )
-        {
-            ulReloadValue -= ulStoppedTimerCompensation;
-        }
-
-        /* Enter a critical section but don't use the taskENTER_CRITICAL()
-         * method as that will mask interrupts that should exit sleep mode. */
-        __asm volatile ( "cpsid i" ::: "memory" );
-        __asm volatile ( "dsb" );
-        __asm volatile ( "isb" );
-
-        /* If a context switch is pending or a task is waiting for the scheduler
-         * to be un-suspended then abandon the low power entry. */
-        if( eTaskConfirmSleepModeStatus() == eAbortSleep )
-        {
-            /* Restart from whatever is left in the count register to complete
-             * this tick period. */
-            portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-            /* Restart SysTick. */
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-            /* Reset the reload register to the value required for normal tick
-             * periods. */
-            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-
-            /* Re-enable interrupts - see comments above the cpsid instruction()
-             * above. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-        }
-        else
-        {
-            /* Set the new reload value. */
-            portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
-
-            /* Clear the SysTick count flag and set the count value back to
-             * zero. */
-            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-
-            /* Restart SysTick. */
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-            /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
-             * set its parameter to 0 to indicate that its implementation
-             * contains its own wait for interrupt or wait for event
-             * instruction, and so wfi should not be executed again. However,
-             * the original expected idle time variable must remain unmodified,
-             * so a copy is taken. */
-            xModifiableIdleTime = xExpectedIdleTime;
-            configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
-
-            if( xModifiableIdleTime > 0 )
-            {
-                __asm volatile ( "dsb" ::: "memory" );
-                __asm volatile ( "wfi" );
-                __asm volatile ( "isb" );
-            }
-
-            configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
-
-            /* Re-enable interrupts to allow the interrupt that brought the MCU
-             * out of sleep mode to execute immediately. See comments above
-             * the cpsid instruction above. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-            __asm volatile ( "dsb" );
-            __asm volatile ( "isb" );
-
-            /* Disable interrupts again because the clock is about to be stopped
-             * and interrupts that execute while the clock is stopped will
-             * increase any slippage between the time maintained by the RTOS and
-             * calendar time. */
-            __asm volatile ( "cpsid i" ::: "memory" );
-            __asm volatile ( "dsb" );
-            __asm volatile ( "isb" );
-
-            /* Disable the SysTick clock without reading the
-             * portNVIC_SYSTICK_CTRL_REG register to ensure the
-             * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.
-             * Again, the time the SysTick is stopped for is accounted for as
-             * best it can be, but using the tickless mode will inevitably
-             * result in some tiny drift of the time maintained by the kernel
-             * with respect to calendar time*/
-            portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
-
-            /* Determine if the SysTick clock has already counted to zero and
-             * been set back to the current reload value (the reload back being
-             * correct for the entire expected idle time) or if the SysTick is
-             * yet to count to zero (in which case an interrupt other than the
-             * SysTick must have brought the system out of sleep mode). */
-            if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
-            {
-                uint32_t ulCalculatedLoadValue;
-
-                /* The tick interrupt is already pending, and the SysTick count
-                 * reloaded with ulReloadValue.  Reset the
-                 * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
-                 * period. */
-                ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
-
-                /* Don't allow a tiny value, or values that have somehow
-                 * underflowed because the post sleep hook did something
-                 * that took too long. */
-                if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
-                {
-                    ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
-                }
-
-                portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
-
-                /* As the pending tick will be processed as soon as this
-                 * function exits, the tick value maintained by the tick is
-                 * stepped forward by one less than the time spent waiting. */
-                ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
-            }
-            else
-            {
-                /* Something other than the tick interrupt ended the sleep.
-                 * Work out how long the sleep lasted rounded to complete tick
-                 * periods (not the ulReload value which accounted for part
-                 * ticks). */
-                ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-                /* How many complete tick periods passed while the processor
-                 * was waiting? */
-                ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
-
-                /* The reload value is set to whatever fraction of a single tick
-                 * period remains. */
-                portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
-            }
-
-            /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
-             * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
-             * value. */
-            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-            vTaskStepTick( ulCompleteTickPeriods );
-            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-
-            /* Exit with interrupts enabled. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-        }
-    }
-#endif /* configUSE_TICKLESS_IDLE */
-/*-----------------------------------------------------------*/
-
-__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Calculate the constants required to configure the tick interrupt. */
-    #if ( configUSE_TICKLESS_IDLE == 1 )
-        {
-            ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
-            xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
-            ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
-        }
-    #endif /* configUSE_TICKLESS_IDLE */
-
-    /* Stop and reset the SysTick. */
-    portNVIC_SYSTICK_CTRL_REG = 0UL;
-    portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-
-    /* Configure SysTick to interrupt at the requested rate. */
-    portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
-    portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
-}
-/*-----------------------------------------------------------*/
-
-static void prvTaskExitError( void )
-{
-    volatile uint32_t ulDummy = 0UL;
-
-    /* A function that implements a task must not exit or attempt to return to
-     * its caller as there is nothing to return to. If a task wants to exit it
-     * should instead call vTaskDelete( NULL ). Artificially force an assert()
-     * to be triggered if configASSERT() is defined, then stop here so
-     * application writers can catch the error. */
-    configASSERT( ulCriticalNesting == ~0UL );
-    portDISABLE_INTERRUPTS();
-
-    while( ulDummy == 0 )
-    {
-        /* This file calls prvTaskExitError() after the scheduler has been
-         * started to remove a compiler warning about the function being
-         * defined but never called.  ulDummy is used purely to quieten other
-         * warnings about code appearing after this function is called - making
-         * ulDummy volatile makes the compiler think the function could return
-         * and therefore not output an 'unreachable code' warning for code that
-         * appears after it. */
-    }
-}
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_MPU == 1 )
-    static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
-    {
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __privileged_functions_start__;
-            extern uint32_t * __privileged_functions_end__;
-            extern uint32_t * __syscalls_flash_start__;
-            extern uint32_t * __syscalls_flash_end__;
-            extern uint32_t * __unprivileged_flash_start__;
-            extern uint32_t * __unprivileged_flash_end__;
-            extern uint32_t * __privileged_sram_start__;
-            extern uint32_t * __privileged_sram_end__;
-        #else /* if defined( __ARMCC_VERSION ) */
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __privileged_functions_start__[];
-            extern uint32_t __privileged_functions_end__[];
-            extern uint32_t __syscalls_flash_start__[];
-            extern uint32_t __syscalls_flash_end__[];
-            extern uint32_t __unprivileged_flash_start__[];
-            extern uint32_t __unprivileged_flash_end__[];
-            extern uint32_t __privileged_sram_start__[];
-            extern uint32_t __privileged_sram_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-
-        /* Check that the MPU is present. */
-        if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
-        {
-            /* MAIR0 - Index 0. */
-            portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
-            /* MAIR0 - Index 1. */
-            portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
-
-            /* Setup privileged flash as Read Only so that privileged tasks can
-             * read it but not modify. */
-            portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_PRIVILEGED_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup unprivileged flash as Read Only by both privileged and
-             * unprivileged tasks. All tasks can read it but no-one can modify. */
-            portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup unprivileged syscalls flash as Read Only by both privileged
-             * and unprivileged tasks. All tasks can read it but no-one can modify. */
-            portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup RAM containing kernel data for privileged access only. */
-            portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
-                               ( portMPU_REGION_EXECUTE_NEVER );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Enable mem fault. */
-            portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE_BIT;
-
-            /* Enable MPU with privileged background access i.e. unmapped
-             * regions have privileged access. */
-            portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE_BIT | portMPU_ENABLE_BIT );
-        }
-    }
-#endif /* configENABLE_MPU */
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_FPU == 1 )
-    static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
-    {
-        #if ( configENABLE_TRUSTZONE == 1 )
-            {
-                /* Enable non-secure access to the FPU. */
-                SecureInit_EnableNSFPUAccess();
-            }
-        #endif /* configENABLE_TRUSTZONE */
-
-        /* CP10 = 11 ==> Full access to FPU i.e. both privileged and
-         * unprivileged code should be able to access FPU. CP11 should be
-         * programmed to the same value as CP10. */
-        *( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
-                            ( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
-                            );
-
-        /* ASPEN = 1 ==> Hardware should automatically preserve floating point
-         * context on exception entry and restore on exception return.
-         * LSPEN = 1 ==> Enable lazy context save of FP state. */
-        *( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
-    }
-#endif /* configENABLE_FPU */
-/*-----------------------------------------------------------*/
-
-void vPortYield( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Set a PendSV to request a context switch. */
-    portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-
-    /* Barriers are normally not required but do ensure the code is
-     * completely within the specified behaviour for the architecture. */
-    __asm volatile ( "dsb" ::: "memory" );
-    __asm volatile ( "isb" );
-}
-/*-----------------------------------------------------------*/
-
-void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
-{
-    portDISABLE_INTERRUPTS();
-    ulCriticalNesting++;
-
-    /* Barriers are normally not required but do ensure the code is
-     * completely within the specified behaviour for the architecture. */
-    __asm volatile ( "dsb" ::: "memory" );
-    __asm volatile ( "isb" );
-}
-/*-----------------------------------------------------------*/
-
-void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
-{
-    configASSERT( ulCriticalNesting );
-    ulCriticalNesting--;
-
-    if( ulCriticalNesting == 0 )
-    {
-        portENABLE_INTERRUPTS();
-    }
-}
-/*-----------------------------------------------------------*/
-
-void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
-{
-    uint32_t ulPreviousMask;
-
-    ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
-    {
-        /* Increment the RTOS tick. */
-        if( xTaskIncrementTick() != pdFALSE )
-        {
-            /* Pend a context switch. */
-            portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-        }
-    }
-    portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
-}
-/*-----------------------------------------------------------*/
-
-void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
-{
-    #if ( configENABLE_MPU == 1 )
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __syscalls_flash_start__;
-            extern uint32_t * __syscalls_flash_end__;
-        #else
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __syscalls_flash_start__[];
-            extern uint32_t __syscalls_flash_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-    #endif /* configENABLE_MPU */
-
-    uint32_t ulPC;
-
-    #if ( configENABLE_TRUSTZONE == 1 )
-        uint32_t ulR0;
-        #if ( configENABLE_MPU == 1 )
-            uint32_t ulControl, ulIsTaskPrivileged;
-        #endif /* configENABLE_MPU */
-    #endif /* configENABLE_TRUSTZONE */
-    uint8_t ucSVCNumber;
-
-    /* Register are stored on the stack in the following order - R0, R1, R2, R3,
-     * R12, LR, PC, xPSR. */
-    ulPC = pulCallerStackAddress[ 6 ];
-    ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ];
-
-    switch( ucSVCNumber )
-    {
-        #if ( configENABLE_TRUSTZONE == 1 )
-            case portSVC_ALLOCATE_SECURE_CONTEXT:
-
-                /* R0 contains the stack size passed as parameter to the
-                 * vPortAllocateSecureContext function. */
-                ulR0 = pulCallerStackAddress[ 0 ];
-
-                #if ( configENABLE_MPU == 1 )
-                    {
-                        /* Read the CONTROL register value. */
-                        __asm volatile ( "mrs %0, control"  : "=r" ( ulControl ) );
-
-                        /* The task that raised the SVC is privileged if Bit[0]
-                         * in the CONTROL register is 0. */
-                        ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
-
-                        /* Allocate and load a context for the secure task. */
-                        xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
-                    }
-                #else /* if ( configENABLE_MPU == 1 ) */
-                    {
-                        /* Allocate and load a context for the secure task. */
-                        xSecureContext = SecureContext_AllocateContext( ulR0 );
-                    }
-                #endif /* configENABLE_MPU */
-
-                configASSERT( xSecureContext != NULL );
-                SecureContext_LoadContext( xSecureContext );
-                break;
-
-            case portSVC_FREE_SECURE_CONTEXT:
-                /* R0 contains the secure context handle to be freed. */
-                ulR0 = pulCallerStackAddress[ 0 ];
-
-                /* Free the secure context. */
-                SecureContext_FreeContext( ( SecureContextHandle_t ) ulR0 );
-                break;
-        #endif /* configENABLE_TRUSTZONE */
-
-        case portSVC_START_SCHEDULER:
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    /* De-prioritize the non-secure exceptions so that the
-                     * non-secure pendSV runs at the lowest priority. */
-                    SecureInit_DePrioritizeNSExceptions();
-
-                    /* Initialize the secure context management system. */
-                    SecureContext_Init();
-                }
-            #endif /* configENABLE_TRUSTZONE */
-
-            #if ( configENABLE_FPU == 1 )
-                {
-                    /* Setup the Floating Point Unit (FPU). */
-                    prvSetupFPU();
-                }
-            #endif /* configENABLE_FPU */
-
-            /* Setup the context of the first task so that the first task starts
-             * executing. */
-            vRestoreContextOfFirstTask();
-            break;
-
-            #if ( configENABLE_MPU == 1 )
-                case portSVC_RAISE_PRIVILEGE:
-
-                    /* Only raise the privilege, if the svc was raised from any of
-                     * the system calls. */
-                    if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) &&
-                        ( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) )
-                    {
-                        vRaisePrivilege();
-                    }
-                    break;
-            #endif /* configENABLE_MPU */
-
-        default:
-            /* Incorrect SVC call. */
-            configASSERT( pdFALSE );
-    }
-}
-/*-----------------------------------------------------------*/
-
-/* *INDENT-OFF* */
-#if ( configENABLE_MPU == 1 )
-    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
-                                         StackType_t * pxEndOfStack,
-                                         TaskFunction_t pxCode,
-                                         void * pvParameters,
-                                         BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
-#else
-    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
-                                         StackType_t * pxEndOfStack,
-                                         TaskFunction_t pxCode,
-                                         void * pvParameters ) /* PRIVILEGED_FUNCTION */
-#endif /* configENABLE_MPU */
-/* *INDENT-ON* */
-{
-    /* Simulate the stack frame as it would be created by a context switch
-     * interrupt. */
-    #if ( portPRELOAD_REGISTERS == 0 )
-        {
-            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
-            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
-            pxTopOfStack -= 5;                                       /* R12, R3, R2 and R1. */
-            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
-            pxTopOfStack -= 9;                                       /* R11..R4, EXC_RETURN. */
-            *pxTopOfStack = portINITIAL_EXC_RETURN;
-
-            #if ( configENABLE_MPU == 1 )
-                {
-                    pxTopOfStack--;
-
-                    if( xRunPrivileged == pdTRUE )
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                    else
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                }
-            #endif /* configENABLE_MPU */
-
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
-
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    pxTopOfStack--;
-                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
-                }
-            #endif /* configENABLE_TRUSTZONE */
-        }
-    #else /* portPRELOAD_REGISTERS */
-        {
-            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
-            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x12121212UL;            /* R12 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x03030303UL;            /* R3 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x02020202UL;            /* R2 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x01010101UL;            /* R1 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x11111111UL;            /* R11 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x10101010UL;            /* R10 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x09090909UL;            /* R09 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x08080808UL;            /* R08 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x07070707UL;            /* R07 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x06060606UL;            /* R06 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x05050505UL;            /* R05 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x04040404UL;            /* R04 */
-            pxTopOfStack--;
-            *pxTopOfStack = portINITIAL_EXC_RETURN;                  /* EXC_RETURN */
-
-            #if ( configENABLE_MPU == 1 )
-                {
-                    pxTopOfStack--;
-
-                    if( xRunPrivileged == pdTRUE )
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                    else
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                }
-            #endif /* configENABLE_MPU */
-
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
-
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    pxTopOfStack--;
-                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
-                }
-            #endif /* configENABLE_TRUSTZONE */
-        }
-    #endif /* portPRELOAD_REGISTERS */
-
-    return pxTopOfStack;
-}
-/*-----------------------------------------------------------*/
-
-BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Make PendSV, CallSV and SysTick the same priority as the kernel. */
-    portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
-    portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
-
-    #if ( configENABLE_MPU == 1 )
-        {
-            /* Setup the Memory Protection Unit (MPU). */
-            prvSetupMPU();
-        }
-    #endif /* configENABLE_MPU */
-
-    /* Start the timer that generates the tick ISR. Interrupts are disabled
-     * here already. */
-    vPortSetupTimerInterrupt();
-
-    /* Initialize the critical nesting count ready for the first task. */
-    ulCriticalNesting = 0;
-
-    /* Start the first task. */
-    vStartFirstTask();
-
-    /* Should never get here as the tasks will now be executing. Call the task
-     * exit error function to prevent compiler warnings about a static function
-     * not being called in the case that the application writer overrides this
-     * functionality by defining configTASK_RETURN_ADDRESS. Call
-     * vTaskSwitchContext() so link time optimization does not remove the
-     * symbol. */
-    vTaskSwitchContext();
-    prvTaskExitError();
-
-    /* Should not get here. */
-    return 0;
-}
-/*-----------------------------------------------------------*/
-
-void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Not implemented in ports where there is nothing to return to.
-     * Artificially force an assert. */
-    configASSERT( ulCriticalNesting == 1000UL );
-}
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_MPU == 1 )
-    void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
-                                    const struct xMEMORY_REGION * const xRegions,
-                                    StackType_t * pxBottomOfStack,
-                                    uint32_t ulStackDepth )
-    {
-        uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
-        int32_t lIndex = 0;
-
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __privileged_sram_start__;
-            extern uint32_t * __privileged_sram_end__;
-        #else
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __privileged_sram_start__[];
-            extern uint32_t __privileged_sram_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-
-        /* Setup MAIR0. */
-        xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
-        xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
-
-        /* This function is called automatically when the task is created - in
-         * which case the stack region parameters will be valid.  At all other
-         * times the stack parameters will not be valid and it is assumed that
-         * the stack region has already been configured. */
-        if( ulStackDepth > 0 )
-        {
-            ulRegionStartAddress = ( uint32_t ) pxBottomOfStack;
-            ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) - 1;
-
-            /* If the stack is within the privileged SRAM, do not protect it
-             * using a separate MPU region. This is needed because privileged
-             * SRAM is already protected using an MPU region and ARMv8-M does
-             * not allow overlapping MPU regions. */
-            if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
-                ( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
-            {
-                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
-                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
-            }
-            else
-            {
-                /* Define the region that allows access to the stack. */
-                ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
-                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
-
-                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
-                                                             ( portMPU_REGION_NON_SHAREABLE ) |
-                                                             ( portMPU_REGION_READ_WRITE ) |
-                                                             ( portMPU_REGION_EXECUTE_NEVER );
-
-                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
-                                                             ( portMPU_RLAR_ATTR_INDEX0 ) |
-                                                             ( portMPU_RLAR_REGION_ENABLE );
-            }
-        }
-
-        /* User supplied configurable regions. */
-        for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
-        {
-            /* If xRegions is NULL i.e. the task has not specified any MPU
-             * region, the else part ensures that all the configurable MPU
-             * regions are invalidated. */
-            if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
-            {
-                /* Translate the generic region definition contained in xRegions
-                 * into the ARMv8 specific MPU settings that are then stored in
-                 * xMPUSettings. */
-                ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
-                ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
-                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
-
-                /* Start address. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
-                                                                          ( portMPU_REGION_NON_SHAREABLE );
-
-                /* RO/RW. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
-                }
-                else
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
-                }
-
-                /* XN. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
-                }
-
-                /* End Address. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
-                                                                          ( portMPU_RLAR_REGION_ENABLE );
-
-                /* Normal memory/ Device memory. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
-                {
-                    /* Attr1 in MAIR0 is configured as device memory. */
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
-                }
-                else
-                {
-                    /* Attr1 in MAIR0 is configured as normal memory. */
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
-                }
-            }
-            else
-            {
-                /* Invalidate the region. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
-            }
-
-            lIndex++;
-        }
-    }
-#endif /* configENABLE_MPU */
-/*-----------------------------------------------------------*/
-
-BaseType_t xPortIsInsideInterrupt( void )
-{
-    uint32_t ulCurrentInterrupt;
-    BaseType_t xReturn;
-
-    /* Obtain the number of the currently executing interrupt. Interrupt Program
-     * Status Register (IPSR) holds the exception number of the currently-executing
-     * exception or zero for Thread mode.*/
-    __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
-
-    if( ulCurrentInterrupt == 0 )
-    {
-        xReturn = pdFALSE;
-    }
-    else
-    {
-        xReturn = pdTRUE;
-    }
-
-    return xReturn;
-}
-/*-----------------------------------------------------------*/
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ */
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+ * all the API functions to use the MPU wrappers. That should only be done when
+ * task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* MPU wrappers includes. */
+#include "mpu_wrappers.h"
+
+/* Portasm includes. */
+#include "portasm.h"
+
+#if ( configENABLE_TRUSTZONE == 1 )
+    /* Secure components includes. */
+    #include "secure_context.h"
+    #include "secure_init.h"
+#endif /* configENABLE_TRUSTZONE */
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/**
+ * The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
+ * i.e. the processor boots as secure and never jumps to the non-secure side.
+ * The Trust Zone support in the port must be disabled in order to run FreeRTOS
+ * on the secure side. The following are the valid configuration seetings:
+ *
+ * 1. Run FreeRTOS on the Secure Side:
+ *      configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
+ *
+ * 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
+ *      configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
+ *
+ * 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
+ *      configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
+ */
+#if ( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
+    #error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
+#endif
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the NVIC.
+ */
+#define portNVIC_SYSTICK_CTRL_REG             ( *( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG             ( *( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG    ( *( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_SHPR3_REG                    ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
+#define portNVIC_SYSTICK_ENABLE_BIT           ( 1UL << 0UL )
+#define portNVIC_SYSTICK_INT_BIT              ( 1UL << 1UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT       ( 1UL << 16UL )
+#define portMIN_INTERRUPT_PRIORITY            ( 255UL )
+#define portNVIC_PENDSV_PRI                   ( portMIN_INTERRUPT_PRIORITY << 16UL )
+#define portNVIC_SYSTICK_PRI                  ( portMIN_INTERRUPT_PRIORITY << 24UL )
+#ifndef configSYSTICK_CLOCK_HZ
+    #define configSYSTICK_CLOCK_HZ            configCPU_CLOCK_HZ
+    /* Ensure the SysTick is clocked at the same frequency as the core. */
+    #define portNVIC_SYSTICK_CLK_BIT          ( 1UL << 2UL )
+#else
+
+/* The way the SysTick is clocked is not modified in case it is not the
+ * same a the core. */
+    #define portNVIC_SYSTICK_CLK_BIT    ( 0 )
+#endif
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the SCB.
+ */
+#define portSCB_SYS_HANDLER_CTRL_STATE_REG    ( *( volatile uint32_t * ) 0xe000ed24 )
+#define portSCB_MEM_FAULT_ENABLE_BIT          ( 1UL << 16UL )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the FPU.
+ */
+#define portCPACR               ( ( volatile uint32_t * ) 0xe000ed88 )              /* Coprocessor Access Control Register. */
+#define portCPACR_CP10_VALUE    ( 3UL )
+#define portCPACR_CP11_VALUE    portCPACR_CP10_VALUE
+#define portCPACR_CP10_POS      ( 20UL )
+#define portCPACR_CP11_POS      ( 22UL )
+
+#define portFPCCR               ( ( volatile uint32_t * ) 0xe000ef34 )              /* Floating Point Context Control Register. */
+#define portFPCCR_ASPEN_POS     ( 31UL )
+#define portFPCCR_ASPEN_MASK    ( 1UL << portFPCCR_ASPEN_POS )
+#define portFPCCR_LSPEN_POS     ( 30UL )
+#define portFPCCR_LSPEN_MASK    ( 1UL << portFPCCR_LSPEN_POS )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the MPU.
+ */
+#define portMPU_TYPE_REG                      ( *( ( volatile uint32_t * ) 0xe000ed90 ) )
+#define portMPU_CTRL_REG                      ( *( ( volatile uint32_t * ) 0xe000ed94 ) )
+#define portMPU_RNR_REG                       ( *( ( volatile uint32_t * ) 0xe000ed98 ) )
+
+#define portMPU_RBAR_REG                      ( *( ( volatile uint32_t * ) 0xe000ed9c ) )
+#define portMPU_RLAR_REG                      ( *( ( volatile uint32_t * ) 0xe000eda0 ) )
+
+#define portMPU_RBAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda4 ) )
+#define portMPU_RLAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda8 ) )
+
+#define portMPU_RBAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edac ) )
+#define portMPU_RLAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edb0 ) )
+
+#define portMPU_RBAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb4 ) )
+#define portMPU_RLAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb8 ) )
+
+#define portMPU_MAIR0_REG                     ( *( ( volatile uint32_t * ) 0xe000edc0 ) )
+#define portMPU_MAIR1_REG                     ( *( ( volatile uint32_t * ) 0xe000edc4 ) )
+
+#define portMPU_RBAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
+#define portMPU_RLAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
+
+#define portMPU_MAIR_ATTR0_POS                ( 0UL )
+#define portMPU_MAIR_ATTR0_MASK               ( 0x000000ff )
+
+#define portMPU_MAIR_ATTR1_POS                ( 8UL )
+#define portMPU_MAIR_ATTR1_MASK               ( 0x0000ff00 )
+
+#define portMPU_MAIR_ATTR2_POS                ( 16UL )
+#define portMPU_MAIR_ATTR2_MASK               ( 0x00ff0000 )
+
+#define portMPU_MAIR_ATTR3_POS                ( 24UL )
+#define portMPU_MAIR_ATTR3_MASK               ( 0xff000000 )
+
+#define portMPU_MAIR_ATTR4_POS                ( 0UL )
+#define portMPU_MAIR_ATTR4_MASK               ( 0x000000ff )
+
+#define portMPU_MAIR_ATTR5_POS                ( 8UL )
+#define portMPU_MAIR_ATTR5_MASK               ( 0x0000ff00 )
+
+#define portMPU_MAIR_ATTR6_POS                ( 16UL )
+#define portMPU_MAIR_ATTR6_MASK               ( 0x00ff0000 )
+
+#define portMPU_MAIR_ATTR7_POS                ( 24UL )
+#define portMPU_MAIR_ATTR7_MASK               ( 0xff000000 )
+
+#define portMPU_RLAR_ATTR_INDEX0              ( 0UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX1              ( 1UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX2              ( 2UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX3              ( 3UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX4              ( 4UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX5              ( 5UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX6              ( 6UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX7              ( 7UL << 1UL )
+
+#define portMPU_RLAR_REGION_ENABLE            ( 1UL )
+
+/* Enable privileged access to unmapped region. */
+#define portMPU_PRIV_BACKGROUND_ENABLE_BIT    ( 1UL << 2UL )
+
+/* Enable MPU. */
+#define portMPU_ENABLE_BIT                    ( 1UL << 0UL )
+
+/* Expected value of the portMPU_TYPE register. */
+#define portEXPECTED_MPU_TYPE_VALUE           ( 8UL << 8UL ) /* 8 regions, unified. */
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief The maximum 24-bit number.
+ *
+ * It is needed because the systick is a 24-bit counter.
+ */
+#define portMAX_24_BIT_NUMBER       ( 0xffffffUL )
+
+/**
+ * @brief A fiddle factor to estimate the number of SysTick counts that would
+ * have occurred while the SysTick counter is stopped during tickless idle
+ * calculations.
+ */
+#define portMISSED_COUNTS_FACTOR    ( 45UL )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to set up the initial stack.
+ */
+#define portINITIAL_XPSR    ( 0x01000000 )
+
+#if ( configRUN_FREERTOS_SECURE_ONLY == 1 )
+
+/**
+ * @brief Initial EXC_RETURN value.
+ *
+ *     FF         FF         FF         FD
+ * 1111 1111  1111 1111  1111 1111  1111 1101
+ *
+ * Bit[6] - 1 --> The exception was taken from the Secure state.
+ * Bit[5] - 1 --> Do not skip stacking of additional state context.
+ * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
+ * Bit[3] - 1 --> Return to the Thread mode.
+ * Bit[2] - 1 --> Restore registers from the process stack.
+ * Bit[1] - 0 --> Reserved, 0.
+ * Bit[0] - 1 --> The exception was taken to the Secure state.
+ */
+    #define portINITIAL_EXC_RETURN    ( 0xfffffffd )
+#else
+
+/**
+ * @brief Initial EXC_RETURN value.
+ *
+ *     FF         FF         FF         BC
+ * 1111 1111  1111 1111  1111 1111  1011 1100
+ *
+ * Bit[6] - 0 --> The exception was taken from the Non-Secure state.
+ * Bit[5] - 1 --> Do not skip stacking of additional state context.
+ * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
+ * Bit[3] - 1 --> Return to the Thread mode.
+ * Bit[2] - 1 --> Restore registers from the process stack.
+ * Bit[1] - 0 --> Reserved, 0.
+ * Bit[0] - 0 --> The exception was taken to the Non-Secure state.
+ */
+    #define portINITIAL_EXC_RETURN    ( 0xffffffbc )
+#endif /* configRUN_FREERTOS_SECURE_ONLY */
+
+/**
+ * @brief CONTROL register privileged bit mask.
+ *
+ * Bit[0] in CONTROL register tells the privilege:
+ *  Bit[0] = 0 ==> The task is privileged.
+ *  Bit[0] = 1 ==> The task is not privileged.
+ */
+#define portCONTROL_PRIVILEGED_MASK         ( 1UL << 0UL )
+
+/**
+ * @brief Initial CONTROL register values.
+ */
+#define portINITIAL_CONTROL_UNPRIVILEGED    ( 0x3 )
+#define portINITIAL_CONTROL_PRIVILEGED      ( 0x2 )
+
+/**
+ * @brief Let the user override the pre-loading of the initial LR with the
+ * address of prvTaskExitError() in case it messes up unwinding of the stack
+ * in the debugger.
+ */
+#ifdef configTASK_RETURN_ADDRESS
+    #define portTASK_RETURN_ADDRESS    configTASK_RETURN_ADDRESS
+#else
+    #define portTASK_RETURN_ADDRESS    prvTaskExitError
+#endif
+
+/**
+ * @brief If portPRELOAD_REGISTERS then registers will be given an initial value
+ * when a task is created. This helps in debugging at the cost of code size.
+ */
+#define portPRELOAD_REGISTERS    1
+
+/**
+ * @brief A task is created without a secure context, and must call
+ * portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
+ * any secure calls.
+ */
+#define portNO_SECURE_CONTEXT    0
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Used to catch tasks that attempt to return from their implementing
+ * function.
+ */
+static void prvTaskExitError( void );
+
+#if ( configENABLE_MPU == 1 )
+
+/**
+ * @brief Setup the Memory Protection Unit (MPU).
+ */
+    static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
+#endif /* configENABLE_MPU */
+
+#if ( configENABLE_FPU == 1 )
+
+/**
+ * @brief Setup the Floating Point Unit (FPU).
+ */
+    static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
+#endif /* configENABLE_FPU */
+
+/**
+ * @brief Setup the timer to generate the tick interrupts.
+ *
+ * The implementation in this file is weak to allow application writers to
+ * change the timer used to generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Checks whether the current execution context is interrupt.
+ *
+ * @return pdTRUE if the current execution context is interrupt, pdFALSE
+ * otherwise.
+ */
+BaseType_t xPortIsInsideInterrupt( void );
+
+/**
+ * @brief Yield the processor.
+ */
+void vPortYield( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Enter critical section.
+ */
+void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Exit from critical section.
+ */
+void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief SysTick handler.
+ */
+void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief C part of SVC handler.
+ */
+portDONT_DISCARD void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) PRIVILEGED_FUNCTION;
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Each task maintains its own interrupt status in the critical nesting
+ * variable.
+ */
+PRIVILEGED_DATA static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
+
+#if ( configENABLE_TRUSTZONE == 1 )
+
+/**
+ * @brief Saved as part of the task context to indicate which context the
+ * task is using on the secure side.
+ */
+    PRIVILEGED_DATA portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
+#endif /* configENABLE_TRUSTZONE */
+
+#if ( configUSE_TICKLESS_IDLE == 1 )
+
+/**
+ * @brief The number of SysTick increments that make up one tick period.
+ */
+    PRIVILEGED_DATA static uint32_t ulTimerCountsForOneTick = 0;
+
+/**
+ * @brief The maximum number of tick periods that can be suppressed is
+ * limited by the 24 bit resolution of the SysTick timer.
+ */
+    PRIVILEGED_DATA static uint32_t xMaximumPossibleSuppressedTicks = 0;
+
+/**
+ * @brief Compensate for the CPU cycles that pass while the SysTick is
+ * stopped (low power functionality only).
+ */
+    PRIVILEGED_DATA static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TICKLESS_IDLE == 1 )
+    __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+    {
+        uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
+        TickType_t xModifiableIdleTime;
+
+        /* Make sure the SysTick reload value does not overflow the counter. */
+        if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+        {
+            xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+        }
+
+        /* Stop the SysTick momentarily. The time the SysTick is stopped for is
+         * accounted for as best it can be, but using the tickless mode will
+         * inevitably result in some tiny drift of the time maintained by the
+         * kernel with respect to calendar time. */
+        portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+        /* Calculate the reload value required to wait xExpectedIdleTime
+         * tick periods. -1 is used because this code will execute part way
+         * through one of the tick periods. */
+        ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+
+        if( ulReloadValue > ulStoppedTimerCompensation )
+        {
+            ulReloadValue -= ulStoppedTimerCompensation;
+        }
+
+        /* Enter a critical section but don't use the taskENTER_CRITICAL()
+         * method as that will mask interrupts that should exit sleep mode. */
+        __asm volatile ( "cpsid i" ::: "memory" );
+        __asm volatile ( "dsb" );
+        __asm volatile ( "isb" );
+
+        /* If a context switch is pending or a task is waiting for the scheduler
+         * to be un-suspended then abandon the low power entry. */
+        if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+        {
+            /* Restart from whatever is left in the count register to complete
+             * this tick period. */
+            portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Reset the reload register to the value required for normal tick
+             * periods. */
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Re-enable interrupts - see comments above the cpsid instruction()
+             * above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+        else
+        {
+            /* Set the new reload value. */
+            portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+            /* Clear the SysTick count flag and set the count value back to
+             * zero. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
+             * set its parameter to 0 to indicate that its implementation
+             * contains its own wait for interrupt or wait for event
+             * instruction, and so wfi should not be executed again. However,
+             * the original expected idle time variable must remain unmodified,
+             * so a copy is taken. */
+            xModifiableIdleTime = xExpectedIdleTime;
+            configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+
+            if( xModifiableIdleTime > 0 )
+            {
+                __asm volatile ( "dsb" ::: "memory" );
+                __asm volatile ( "wfi" );
+                __asm volatile ( "isb" );
+            }
+
+            configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+            /* Re-enable interrupts to allow the interrupt that brought the MCU
+             * out of sleep mode to execute immediately. See comments above
+             * the cpsid instruction above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable interrupts again because the clock is about to be stopped
+             * and interrupts that execute while the clock is stopped will
+             * increase any slippage between the time maintained by the RTOS and
+             * calendar time. */
+            __asm volatile ( "cpsid i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable the SysTick clock without reading the
+             * portNVIC_SYSTICK_CTRL_REG register to ensure the
+             * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.
+             * Again, the time the SysTick is stopped for is accounted for as
+             * best it can be, but using the tickless mode will inevitably
+             * result in some tiny drift of the time maintained by the kernel
+             * with respect to calendar time*/
+            portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
+
+            /* Determine if the SysTick clock has already counted to zero and
+             * been set back to the current reload value (the reload back being
+             * correct for the entire expected idle time) or if the SysTick is
+             * yet to count to zero (in which case an interrupt other than the
+             * SysTick must have brought the system out of sleep mode). */
+            if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+            {
+                uint32_t ulCalculatedLoadValue;
+
+                /* The tick interrupt is already pending, and the SysTick count
+                 * reloaded with ulReloadValue.  Reset the
+                 * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+                 * period. */
+                ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+                /* Don't allow a tiny value, or values that have somehow
+                 * underflowed because the post sleep hook did something
+                 * that took too long. */
+                if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+                {
+                    ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+                }
+
+                portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+                /* As the pending tick will be processed as soon as this
+                 * function exits, the tick value maintained by the tick is
+                 * stepped forward by one less than the time spent waiting. */
+                ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+            }
+            else
+            {
+                /* Something other than the tick interrupt ended the sleep.
+                 * Work out how long the sleep lasted rounded to complete tick
+                 * periods (not the ulReload value which accounted for part
+                 * ticks). */
+                ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+                /* How many complete tick periods passed while the processor
+                 * was waiting? */
+                ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+                /* The reload value is set to whatever fraction of a single tick
+                 * period remains. */
+                portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+            }
+
+            /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+             * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+             * value. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+            vTaskStepTick( ulCompleteTickPeriods );
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Exit with interrupts enabled. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+    }
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Calculate the constants required to configure the tick interrupt. */
+    #if ( configUSE_TICKLESS_IDLE == 1 )
+        {
+            ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
+            xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+            ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
+        }
+    #endif /* configUSE_TICKLESS_IDLE */
+
+    /* Stop and reset the SysTick. */
+    portNVIC_SYSTICK_CTRL_REG = 0UL;
+    portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+    /* Configure SysTick to interrupt at the requested rate. */
+    portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+    portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+    volatile uint32_t ulDummy = 0UL;
+
+    /* A function that implements a task must not exit or attempt to return to
+     * its caller as there is nothing to return to. If a task wants to exit it
+     * should instead call vTaskDelete( NULL ). Artificially force an assert()
+     * to be triggered if configASSERT() is defined, then stop here so
+     * application writers can catch the error. */
+    configASSERT( ulCriticalNesting == ~0UL );
+    portDISABLE_INTERRUPTS();
+
+    while( ulDummy == 0 )
+    {
+        /* This file calls prvTaskExitError() after the scheduler has been
+         * started to remove a compiler warning about the function being
+         * defined but never called.  ulDummy is used purely to quieten other
+         * warnings about code appearing after this function is called - making
+         * ulDummy volatile makes the compiler think the function could return
+         * and therefore not output an 'unreachable code' warning for code that
+         * appears after it. */
+    }
+}
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_MPU == 1 )
+    static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
+    {
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __privileged_functions_start__;
+            extern uint32_t * __privileged_functions_end__;
+            extern uint32_t * __syscalls_flash_start__;
+            extern uint32_t * __syscalls_flash_end__;
+            extern uint32_t * __unprivileged_flash_start__;
+            extern uint32_t * __unprivileged_flash_end__;
+            extern uint32_t * __privileged_sram_start__;
+            extern uint32_t * __privileged_sram_end__;
+        #else /* if defined( __ARMCC_VERSION ) */
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __privileged_functions_start__[];
+            extern uint32_t __privileged_functions_end__[];
+            extern uint32_t __syscalls_flash_start__[];
+            extern uint32_t __syscalls_flash_end__[];
+            extern uint32_t __unprivileged_flash_start__[];
+            extern uint32_t __unprivileged_flash_end__[];
+            extern uint32_t __privileged_sram_start__[];
+            extern uint32_t __privileged_sram_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+
+        /* Check that the MPU is present. */
+        if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
+        {
+            /* MAIR0 - Index 0. */
+            portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
+            /* MAIR0 - Index 1. */
+            portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
+
+            /* Setup privileged flash as Read Only so that privileged tasks can
+             * read it but not modify. */
+            portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_PRIVILEGED_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup unprivileged flash as Read Only by both privileged and
+             * unprivileged tasks. All tasks can read it but no-one can modify. */
+            portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup unprivileged syscalls flash as Read Only by both privileged
+             * and unprivileged tasks. All tasks can read it but no-one can modify. */
+            portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup RAM containing kernel data for privileged access only. */
+            portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
+                               ( portMPU_REGION_EXECUTE_NEVER );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Enable mem fault. */
+            portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE_BIT;
+
+            /* Enable MPU with privileged background access i.e. unmapped
+             * regions have privileged access. */
+            portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE_BIT | portMPU_ENABLE_BIT );
+        }
+    }
+#endif /* configENABLE_MPU */
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_FPU == 1 )
+    static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
+    {
+        #if ( configENABLE_TRUSTZONE == 1 )
+            {
+                /* Enable non-secure access to the FPU. */
+                SecureInit_EnableNSFPUAccess();
+            }
+        #endif /* configENABLE_TRUSTZONE */
+
+        /* CP10 = 11 ==> Full access to FPU i.e. both privileged and
+         * unprivileged code should be able to access FPU. CP11 should be
+         * programmed to the same value as CP10. */
+        *( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
+                            ( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
+                            );
+
+        /* ASPEN = 1 ==> Hardware should automatically preserve floating point
+         * context on exception entry and restore on exception return.
+         * LSPEN = 1 ==> Enable lazy context save of FP state. */
+        *( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
+    }
+#endif /* configENABLE_FPU */
+/*-----------------------------------------------------------*/
+
+void vPortYield( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Set a PendSV to request a context switch. */
+    portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+
+    /* Barriers are normally not required but do ensure the code is
+     * completely within the specified behaviour for the architecture. */
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
+{
+    portDISABLE_INTERRUPTS();
+    ulCriticalNesting++;
+
+    /* Barriers are normally not required but do ensure the code is
+     * completely within the specified behaviour for the architecture. */
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
+{
+    configASSERT( ulCriticalNesting );
+    ulCriticalNesting--;
+
+    if( ulCriticalNesting == 0 )
+    {
+        portENABLE_INTERRUPTS();
+    }
+}
+/*-----------------------------------------------------------*/
+
+void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
+{
+    uint32_t ulPreviousMask;
+
+    ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
+    {
+        /* Increment the RTOS tick. */
+        if( xTaskIncrementTick() != pdFALSE )
+        {
+            /* Pend a context switch. */
+            portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+        }
+    }
+    portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
+}
+/*-----------------------------------------------------------*/
+
+void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
+{
+    #if ( configENABLE_MPU == 1 )
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __syscalls_flash_start__;
+            extern uint32_t * __syscalls_flash_end__;
+        #else
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __syscalls_flash_start__[];
+            extern uint32_t __syscalls_flash_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+    #endif /* configENABLE_MPU */
+
+    uint32_t ulPC;
+
+    #if ( configENABLE_TRUSTZONE == 1 )
+        uint32_t ulR0;
+        #if ( configENABLE_MPU == 1 )
+            uint32_t ulControl, ulIsTaskPrivileged;
+        #endif /* configENABLE_MPU */
+    #endif /* configENABLE_TRUSTZONE */
+    uint8_t ucSVCNumber;
+
+    /* Register are stored on the stack in the following order - R0, R1, R2, R3,
+     * R12, LR, PC, xPSR. */
+    ulPC = pulCallerStackAddress[ 6 ];
+    ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ];
+
+    switch( ucSVCNumber )
+    {
+        #if ( configENABLE_TRUSTZONE == 1 )
+            case portSVC_ALLOCATE_SECURE_CONTEXT:
+
+                /* R0 contains the stack size passed as parameter to the
+                 * vPortAllocateSecureContext function. */
+                ulR0 = pulCallerStackAddress[ 0 ];
+
+                #if ( configENABLE_MPU == 1 )
+                    {
+                        /* Read the CONTROL register value. */
+                        __asm volatile ( "mrs %0, control"  : "=r" ( ulControl ) );
+
+                        /* The task that raised the SVC is privileged if Bit[0]
+                         * in the CONTROL register is 0. */
+                        ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
+
+                        /* Allocate and load a context for the secure task. */
+                        xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
+                    }
+                #else /* if ( configENABLE_MPU == 1 ) */
+                    {
+                        /* Allocate and load a context for the secure task. */
+                        xSecureContext = SecureContext_AllocateContext( ulR0 );
+                    }
+                #endif /* configENABLE_MPU */
+
+                configASSERT( xSecureContext != NULL );
+                SecureContext_LoadContext( xSecureContext );
+                break;
+
+            case portSVC_FREE_SECURE_CONTEXT:
+                /* R0 contains the secure context handle to be freed. */
+                ulR0 = pulCallerStackAddress[ 0 ];
+
+                /* Free the secure context. */
+                SecureContext_FreeContext( ( SecureContextHandle_t ) ulR0 );
+                break;
+        #endif /* configENABLE_TRUSTZONE */
+
+        case portSVC_START_SCHEDULER:
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    /* De-prioritize the non-secure exceptions so that the
+                     * non-secure pendSV runs at the lowest priority. */
+                    SecureInit_DePrioritizeNSExceptions();
+
+                    /* Initialize the secure context management system. */
+                    SecureContext_Init();
+                }
+            #endif /* configENABLE_TRUSTZONE */
+
+            #if ( configENABLE_FPU == 1 )
+                {
+                    /* Setup the Floating Point Unit (FPU). */
+                    prvSetupFPU();
+                }
+            #endif /* configENABLE_FPU */
+
+            /* Setup the context of the first task so that the first task starts
+             * executing. */
+            vRestoreContextOfFirstTask();
+            break;
+
+            #if ( configENABLE_MPU == 1 )
+                case portSVC_RAISE_PRIVILEGE:
+
+                    /* Only raise the privilege, if the svc was raised from any of
+                     * the system calls. */
+                    if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) &&
+                        ( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) )
+                    {
+                        vRaisePrivilege();
+                    }
+                    break;
+            #endif /* configENABLE_MPU */
+
+        default:
+            /* Incorrect SVC call. */
+            configASSERT( pdFALSE );
+    }
+}
+/*-----------------------------------------------------------*/
+
+/* *INDENT-OFF* */
+#if ( configENABLE_MPU == 1 )
+    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
+                                         StackType_t * pxEndOfStack,
+                                         TaskFunction_t pxCode,
+                                         void * pvParameters,
+                                         BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
+#else
+    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
+                                         StackType_t * pxEndOfStack,
+                                         TaskFunction_t pxCode,
+                                         void * pvParameters ) /* PRIVILEGED_FUNCTION */
+#endif /* configENABLE_MPU */
+/* *INDENT-ON* */
+{
+    /* Simulate the stack frame as it would be created by a context switch
+     * interrupt. */
+    #if ( portPRELOAD_REGISTERS == 0 )
+        {
+            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+            pxTopOfStack -= 5;                                       /* R12, R3, R2 and R1. */
+            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
+            pxTopOfStack -= 9;                                       /* R11..R4, EXC_RETURN. */
+            *pxTopOfStack = portINITIAL_EXC_RETURN;
+
+            #if ( configENABLE_MPU == 1 )
+                {
+                    pxTopOfStack--;
+
+                    if( xRunPrivileged == pdTRUE )
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                    else
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                }
+            #endif /* configENABLE_MPU */
+
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
+
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    pxTopOfStack--;
+                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
+                }
+            #endif /* configENABLE_TRUSTZONE */
+        }
+    #else /* portPRELOAD_REGISTERS */
+        {
+            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x12121212UL;            /* R12 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x03030303UL;            /* R3 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x02020202UL;            /* R2 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x01010101UL;            /* R1 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x11111111UL;            /* R11 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x10101010UL;            /* R10 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x09090909UL;            /* R09 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x08080808UL;            /* R08 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x07070707UL;            /* R07 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x06060606UL;            /* R06 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x05050505UL;            /* R05 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x04040404UL;            /* R04 */
+            pxTopOfStack--;
+            *pxTopOfStack = portINITIAL_EXC_RETURN;                  /* EXC_RETURN */
+
+            #if ( configENABLE_MPU == 1 )
+                {
+                    pxTopOfStack--;
+
+                    if( xRunPrivileged == pdTRUE )
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                    else
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                }
+            #endif /* configENABLE_MPU */
+
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
+
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    pxTopOfStack--;
+                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
+                }
+            #endif /* configENABLE_TRUSTZONE */
+        }
+    #endif /* portPRELOAD_REGISTERS */
+
+    return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Make PendSV, CallSV and SysTick the same priority as the kernel. */
+    portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
+    portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
+
+    #if ( configENABLE_MPU == 1 )
+        {
+            /* Setup the Memory Protection Unit (MPU). */
+            prvSetupMPU();
+        }
+    #endif /* configENABLE_MPU */
+
+    /* Start the timer that generates the tick ISR. Interrupts are disabled
+     * here already. */
+    vPortSetupTimerInterrupt();
+
+    /* Initialize the critical nesting count ready for the first task. */
+    ulCriticalNesting = 0;
+
+    /* Start the first task. */
+    vStartFirstTask();
+
+    /* Should never get here as the tasks will now be executing. Call the task
+     * exit error function to prevent compiler warnings about a static function
+     * not being called in the case that the application writer overrides this
+     * functionality by defining configTASK_RETURN_ADDRESS. Call
+     * vTaskSwitchContext() so link time optimization does not remove the
+     * symbol. */
+    vTaskSwitchContext();
+    prvTaskExitError();
+
+    /* Should not get here. */
+    return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Not implemented in ports where there is nothing to return to.
+     * Artificially force an assert. */
+    configASSERT( ulCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_MPU == 1 )
+    void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
+                                    const struct xMEMORY_REGION * const xRegions,
+                                    StackType_t * pxBottomOfStack,
+                                    uint32_t ulStackDepth )
+    {
+        uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
+        int32_t lIndex = 0;
+
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __privileged_sram_start__;
+            extern uint32_t * __privileged_sram_end__;
+        #else
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __privileged_sram_start__[];
+            extern uint32_t __privileged_sram_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+
+        /* Setup MAIR0. */
+        xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
+        xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
+
+        /* This function is called automatically when the task is created - in
+         * which case the stack region parameters will be valid.  At all other
+         * times the stack parameters will not be valid and it is assumed that
+         * the stack region has already been configured. */
+        if( ulStackDepth > 0 )
+        {
+            ulRegionStartAddress = ( uint32_t ) pxBottomOfStack;
+            ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) - 1;
+
+            /* If the stack is within the privileged SRAM, do not protect it
+             * using a separate MPU region. This is needed because privileged
+             * SRAM is already protected using an MPU region and ARMv8-M does
+             * not allow overlapping MPU regions. */
+            if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
+                ( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
+            {
+                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
+                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
+            }
+            else
+            {
+                /* Define the region that allows access to the stack. */
+                ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
+                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
+
+                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
+                                                             ( portMPU_REGION_NON_SHAREABLE ) |
+                                                             ( portMPU_REGION_READ_WRITE ) |
+                                                             ( portMPU_REGION_EXECUTE_NEVER );
+
+                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
+                                                             ( portMPU_RLAR_ATTR_INDEX0 ) |
+                                                             ( portMPU_RLAR_REGION_ENABLE );
+            }
+        }
+
+        /* User supplied configurable regions. */
+        for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
+        {
+            /* If xRegions is NULL i.e. the task has not specified any MPU
+             * region, the else part ensures that all the configurable MPU
+             * regions are invalidated. */
+            if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
+            {
+                /* Translate the generic region definition contained in xRegions
+                 * into the ARMv8 specific MPU settings that are then stored in
+                 * xMPUSettings. */
+                ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
+                ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
+                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
+
+                /* Start address. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
+                                                                          ( portMPU_REGION_NON_SHAREABLE );
+
+                /* RO/RW. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
+                }
+                else
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
+                }
+
+                /* XN. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
+                }
+
+                /* End Address. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
+                                                                          ( portMPU_RLAR_REGION_ENABLE );
+
+                /* Normal memory/ Device memory. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
+                {
+                    /* Attr1 in MAIR0 is configured as device memory. */
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
+                }
+                else
+                {
+                    /* Attr1 in MAIR0 is configured as normal memory. */
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
+                }
+            }
+            else
+            {
+                /* Invalidate the region. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
+            }
+
+            lIndex++;
+        }
+    }
+#endif /* configENABLE_MPU */
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortIsInsideInterrupt( void )
+{
+    uint32_t ulCurrentInterrupt;
+    BaseType_t xReturn;
+
+    /* Obtain the number of the currently executing interrupt. Interrupt Program
+     * Status Register (IPSR) holds the exception number of the currently-executing
+     * exception or zero for Thread mode.*/
+    __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
+
+    if( ulCurrentInterrupt == 0 )
+    {
+        xReturn = pdFALSE;
+    }
+    else
+    {
+        xReturn = pdTRUE;
+    }
+
+    return xReturn;
+}
+/*-----------------------------------------------------------*/
diff --git a/portable/GCC/ARM_CM3/port.c b/portable/GCC/ARM_CM3/port.c
index b21fb20..ef2efbe 100644
--- a/portable/GCC/ARM_CM3/port.c
+++ b/portable/GCC/ARM_CM3/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/GCC/ARM_CM33/non_secure/port.c b/portable/GCC/ARM_CM33/non_secure/port.c
index e0a0c7e..8cccf3f 100644
--- a/portable/GCC/ARM_CM33/non_secure/port.c
+++ b/portable/GCC/ARM_CM33/non_secure/port.c
@@ -1,1194 +1,1193 @@
-/*
- * FreeRTOS Kernel V10.3.1
- * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
- * all the API functions to use the MPU wrappers. That should only be done when
- * task.h is included from an application file. */
-#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
-
-/* Scheduler includes. */
-#include "FreeRTOS.h"
-#include "task.h"
-
-/* MPU wrappers includes. */
-#include "mpu_wrappers.h"
-
-/* Portasm includes. */
-#include "portasm.h"
-
-#if ( configENABLE_TRUSTZONE == 1 )
-    /* Secure components includes. */
-    #include "secure_context.h"
-    #include "secure_init.h"
-#endif /* configENABLE_TRUSTZONE */
-
-#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
-
-/**
- * The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
- * i.e. the processor boots as secure and never jumps to the non-secure side.
- * The Trust Zone support in the port must be disabled in order to run FreeRTOS
- * on the secure side. The following are the valid configuration seetings:
- *
- * 1. Run FreeRTOS on the Secure Side:
- *		configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
- *
- * 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
- *		configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
- *
- * 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
- *		configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
- */
-#if ( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
-    #error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
-#endif
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the NVIC.
- */
-#define portNVIC_SYSTICK_CTRL_REG             ( *( ( volatile uint32_t * ) 0xe000e010 ) )
-#define portNVIC_SYSTICK_LOAD_REG             ( *( ( volatile uint32_t * ) 0xe000e014 ) )
-#define portNVIC_SYSTICK_CURRENT_VALUE_REG    ( *( ( volatile uint32_t * ) 0xe000e018 ) )
-#define portNVIC_SHPR3_REG                    ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
-#define portNVIC_SYSTICK_ENABLE_BIT           ( 1UL << 0UL )
-#define portNVIC_SYSTICK_INT_BIT              ( 1UL << 1UL )
-#define portNVIC_SYSTICK_COUNT_FLAG_BIT       ( 1UL << 16UL )
-#define portMIN_INTERRUPT_PRIORITY            ( 255UL )
-#define portNVIC_PENDSV_PRI                   ( portMIN_INTERRUPT_PRIORITY << 16UL )
-#define portNVIC_SYSTICK_PRI                  ( portMIN_INTERRUPT_PRIORITY << 24UL )
-#ifndef configSYSTICK_CLOCK_HZ
-    #define configSYSTICK_CLOCK_HZ            configCPU_CLOCK_HZ
-    /* Ensure the SysTick is clocked at the same frequency as the core. */
-    #define portNVIC_SYSTICK_CLK_BIT          ( 1UL << 2UL )
-#else
-
-/* The way the SysTick is clocked is not modified in case it is not the
- * same a the core. */
-    #define portNVIC_SYSTICK_CLK_BIT    ( 0 )
-#endif
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the SCB.
- */
-#define portSCB_SYS_HANDLER_CTRL_STATE_REG    ( *( volatile uint32_t * ) 0xe000ed24 )
-#define portSCB_MEM_FAULT_ENABLE_BIT          ( 1UL << 16UL )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the FPU.
- */
-#define portCPACR               ( ( volatile uint32_t * ) 0xe000ed88 )              /* Coprocessor Access Control Register. */
-#define portCPACR_CP10_VALUE    ( 3UL )
-#define portCPACR_CP11_VALUE    portCPACR_CP10_VALUE
-#define portCPACR_CP10_POS      ( 20UL )
-#define portCPACR_CP11_POS      ( 22UL )
-
-#define portFPCCR               ( ( volatile uint32_t * ) 0xe000ef34 )              /* Floating Point Context Control Register. */
-#define portFPCCR_ASPEN_POS     ( 31UL )
-#define portFPCCR_ASPEN_MASK    ( 1UL << portFPCCR_ASPEN_POS )
-#define portFPCCR_LSPEN_POS     ( 30UL )
-#define portFPCCR_LSPEN_MASK    ( 1UL << portFPCCR_LSPEN_POS )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to manipulate the MPU.
- */
-#define portMPU_TYPE_REG                      ( *( ( volatile uint32_t * ) 0xe000ed90 ) )
-#define portMPU_CTRL_REG                      ( *( ( volatile uint32_t * ) 0xe000ed94 ) )
-#define portMPU_RNR_REG                       ( *( ( volatile uint32_t * ) 0xe000ed98 ) )
-
-#define portMPU_RBAR_REG                      ( *( ( volatile uint32_t * ) 0xe000ed9c ) )
-#define portMPU_RLAR_REG                      ( *( ( volatile uint32_t * ) 0xe000eda0 ) )
-
-#define portMPU_RBAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda4 ) )
-#define portMPU_RLAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda8 ) )
-
-#define portMPU_RBAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edac ) )
-#define portMPU_RLAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edb0 ) )
-
-#define portMPU_RBAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb4 ) )
-#define portMPU_RLAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb8 ) )
-
-#define portMPU_MAIR0_REG                     ( *( ( volatile uint32_t * ) 0xe000edc0 ) )
-#define portMPU_MAIR1_REG                     ( *( ( volatile uint32_t * ) 0xe000edc4 ) )
-
-#define portMPU_RBAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
-#define portMPU_RLAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
-
-#define portMPU_MAIR_ATTR0_POS                ( 0UL )
-#define portMPU_MAIR_ATTR0_MASK               ( 0x000000ff )
-
-#define portMPU_MAIR_ATTR1_POS                ( 8UL )
-#define portMPU_MAIR_ATTR1_MASK               ( 0x0000ff00 )
-
-#define portMPU_MAIR_ATTR2_POS                ( 16UL )
-#define portMPU_MAIR_ATTR2_MASK               ( 0x00ff0000 )
-
-#define portMPU_MAIR_ATTR3_POS                ( 24UL )
-#define portMPU_MAIR_ATTR3_MASK               ( 0xff000000 )
-
-#define portMPU_MAIR_ATTR4_POS                ( 0UL )
-#define portMPU_MAIR_ATTR4_MASK               ( 0x000000ff )
-
-#define portMPU_MAIR_ATTR5_POS                ( 8UL )
-#define portMPU_MAIR_ATTR5_MASK               ( 0x0000ff00 )
-
-#define portMPU_MAIR_ATTR6_POS                ( 16UL )
-#define portMPU_MAIR_ATTR6_MASK               ( 0x00ff0000 )
-
-#define portMPU_MAIR_ATTR7_POS                ( 24UL )
-#define portMPU_MAIR_ATTR7_MASK               ( 0xff000000 )
-
-#define portMPU_RLAR_ATTR_INDEX0              ( 0UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX1              ( 1UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX2              ( 2UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX3              ( 3UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX4              ( 4UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX5              ( 5UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX6              ( 6UL << 1UL )
-#define portMPU_RLAR_ATTR_INDEX7              ( 7UL << 1UL )
-
-#define portMPU_RLAR_REGION_ENABLE            ( 1UL )
-
-/* Enable privileged access to unmapped region. */
-#define portMPU_PRIV_BACKGROUND_ENABLE_BIT    ( 1UL << 2UL )
-
-/* Enable MPU. */
-#define portMPU_ENABLE_BIT                    ( 1UL << 0UL )
-
-/* Expected value of the portMPU_TYPE register. */
-#define portEXPECTED_MPU_TYPE_VALUE           ( 8UL << 8UL ) /* 8 regions, unified. */
-/*-----------------------------------------------------------*/
-
-/**
- * @brief The maximum 24-bit number.
- *
- * It is needed because the systick is a 24-bit counter.
- */
-#define portMAX_24_BIT_NUMBER       ( 0xffffffUL )
-
-/**
- * @brief A fiddle factor to estimate the number of SysTick counts that would
- * have occurred while the SysTick counter is stopped during tickless idle
- * calculations.
- */
-#define portMISSED_COUNTS_FACTOR    ( 45UL )
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Constants required to set up the initial stack.
- */
-#define portINITIAL_XPSR    ( 0x01000000 )
-
-#if ( configRUN_FREERTOS_SECURE_ONLY == 1 )
-
-/**
- * @brief Initial EXC_RETURN value.
- *
- *     FF         FF         FF         FD
- * 1111 1111  1111 1111  1111 1111  1111 1101
- *
- * Bit[6] - 1 --> The exception was taken from the Secure state.
- * Bit[5] - 1 --> Do not skip stacking of additional state context.
- * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
- * Bit[3] - 1 --> Return to the Thread mode.
- * Bit[2] - 1 --> Restore registers from the process stack.
- * Bit[1] - 0 --> Reserved, 0.
- * Bit[0] - 1 --> The exception was taken to the Secure state.
- */
-    #define portINITIAL_EXC_RETURN    ( 0xfffffffd )
-#else
-
-/**
- * @brief Initial EXC_RETURN value.
- *
- *     FF         FF         FF         BC
- * 1111 1111  1111 1111  1111 1111  1011 1100
- *
- * Bit[6] - 0 --> The exception was taken from the Non-Secure state.
- * Bit[5] - 1 --> Do not skip stacking of additional state context.
- * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
- * Bit[3] - 1 --> Return to the Thread mode.
- * Bit[2] - 1 --> Restore registers from the process stack.
- * Bit[1] - 0 --> Reserved, 0.
- * Bit[0] - 0 --> The exception was taken to the Non-Secure state.
- */
-    #define portINITIAL_EXC_RETURN    ( 0xffffffbc )
-#endif /* configRUN_FREERTOS_SECURE_ONLY */
-
-/**
- * @brief CONTROL register privileged bit mask.
- *
- * Bit[0] in CONTROL register tells the privilege:
- *  Bit[0] = 0 ==> The task is privileged.
- *  Bit[0] = 1 ==> The task is not privileged.
- */
-#define portCONTROL_PRIVILEGED_MASK         ( 1UL << 0UL )
-
-/**
- * @brief Initial CONTROL register values.
- */
-#define portINITIAL_CONTROL_UNPRIVILEGED    ( 0x3 )
-#define portINITIAL_CONTROL_PRIVILEGED      ( 0x2 )
-
-/**
- * @brief Let the user override the pre-loading of the initial LR with the
- * address of prvTaskExitError() in case it messes up unwinding of the stack
- * in the debugger.
- */
-#ifdef configTASK_RETURN_ADDRESS
-    #define portTASK_RETURN_ADDRESS    configTASK_RETURN_ADDRESS
-#else
-    #define portTASK_RETURN_ADDRESS    prvTaskExitError
-#endif
-
-/**
- * @brief If portPRELOAD_REGISTERS then registers will be given an initial value
- * when a task is created. This helps in debugging at the cost of code size.
- */
-#define portPRELOAD_REGISTERS    1
-
-/**
- * @brief A task is created without a secure context, and must call
- * portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
- * any secure calls.
- */
-#define portNO_SECURE_CONTEXT    0
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Used to catch tasks that attempt to return from their implementing
- * function.
- */
-static void prvTaskExitError( void );
-
-#if ( configENABLE_MPU == 1 )
-
-/**
- * @brief Setup the Memory Protection Unit (MPU).
- */
-    static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
-#endif /* configENABLE_MPU */
-
-#if ( configENABLE_FPU == 1 )
-
-/**
- * @brief Setup the Floating Point Unit (FPU).
- */
-    static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
-#endif /* configENABLE_FPU */
-
-/**
- * @brief Setup the timer to generate the tick interrupts.
- *
- * The implementation in this file is weak to allow application writers to
- * change the timer used to generate the tick interrupt.
- */
-void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Checks whether the current execution context is interrupt.
- *
- * @return pdTRUE if the current execution context is interrupt, pdFALSE
- * otherwise.
- */
-BaseType_t xPortIsInsideInterrupt( void );
-
-/**
- * @brief Yield the processor.
- */
-void vPortYield( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Enter critical section.
- */
-void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief Exit from critical section.
- */
-void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief SysTick handler.
- */
-void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
-
-/**
- * @brief C part of SVC handler.
- */
-portDONT_DISCARD void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) PRIVILEGED_FUNCTION;
-/*-----------------------------------------------------------*/
-
-/**
- * @brief Each task maintains its own interrupt status in the critical nesting
- * variable.
- */
-PRIVILEGED_DATA static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
-
-#if ( configENABLE_TRUSTZONE == 1 )
-
-/**
- * @brief Saved as part of the task context to indicate which context the
- * task is using on the secure side.
- */
-    PRIVILEGED_DATA portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
-#endif /* configENABLE_TRUSTZONE */
-
-#if ( configUSE_TICKLESS_IDLE == 1 )
-
-/**
- * @brief The number of SysTick increments that make up one tick period.
- */
-    PRIVILEGED_DATA static uint32_t ulTimerCountsForOneTick = 0;
-
-/**
- * @brief The maximum number of tick periods that can be suppressed is
- * limited by the 24 bit resolution of the SysTick timer.
- */
-    PRIVILEGED_DATA static uint32_t xMaximumPossibleSuppressedTicks = 0;
-
-/**
- * @brief Compensate for the CPU cycles that pass while the SysTick is
- * stopped (low power functionality only).
- */
-    PRIVILEGED_DATA static uint32_t ulStoppedTimerCompensation = 0;
-#endif /* configUSE_TICKLESS_IDLE */
-/*-----------------------------------------------------------*/
-
-#if ( configUSE_TICKLESS_IDLE == 1 )
-    __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
-    {
-        uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
-        TickType_t xModifiableIdleTime;
-
-        /* Make sure the SysTick reload value does not overflow the counter. */
-        if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
-        {
-            xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
-        }
-
-        /* Stop the SysTick momentarily. The time the SysTick is stopped for is
-         * accounted for as best it can be, but using the tickless mode will
-         * inevitably result in some tiny drift of the time maintained by the
-         * kernel with respect to calendar time. */
-        portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
-
-        /* Calculate the reload value required to wait xExpectedIdleTime
-         * tick periods. -1 is used because this code will execute part way
-         * through one of the tick periods. */
-        ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
-
-        if( ulReloadValue > ulStoppedTimerCompensation )
-        {
-            ulReloadValue -= ulStoppedTimerCompensation;
-        }
-
-        /* Enter a critical section but don't use the taskENTER_CRITICAL()
-         * method as that will mask interrupts that should exit sleep mode. */
-        __asm volatile ( "cpsid i" ::: "memory" );
-        __asm volatile ( "dsb" );
-        __asm volatile ( "isb" );
-
-        /* If a context switch is pending or a task is waiting for the scheduler
-         * to be un-suspended then abandon the low power entry. */
-        if( eTaskConfirmSleepModeStatus() == eAbortSleep )
-        {
-            /* Restart from whatever is left in the count register to complete
-             * this tick period. */
-            portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-            /* Restart SysTick. */
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-            /* Reset the reload register to the value required for normal tick
-             * periods. */
-            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-
-            /* Re-enable interrupts - see comments above the cpsid instruction()
-             * above. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-        }
-        else
-        {
-            /* Set the new reload value. */
-            portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
-
-            /* Clear the SysTick count flag and set the count value back to
-             * zero. */
-            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-
-            /* Restart SysTick. */
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-            /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
-             * set its parameter to 0 to indicate that its implementation
-             * contains its own wait for interrupt or wait for event
-             * instruction, and so wfi should not be executed again. However,
-             * the original expected idle time variable must remain unmodified,
-             * so a copy is taken. */
-            xModifiableIdleTime = xExpectedIdleTime;
-            configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
-
-            if( xModifiableIdleTime > 0 )
-            {
-                __asm volatile ( "dsb" ::: "memory" );
-                __asm volatile ( "wfi" );
-                __asm volatile ( "isb" );
-            }
-
-            configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
-
-            /* Re-enable interrupts to allow the interrupt that brought the MCU
-             * out of sleep mode to execute immediately. See comments above
-             * the cpsid instruction above. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-            __asm volatile ( "dsb" );
-            __asm volatile ( "isb" );
-
-            /* Disable interrupts again because the clock is about to be stopped
-             * and interrupts that execute while the clock is stopped will
-             * increase any slippage between the time maintained by the RTOS and
-             * calendar time. */
-            __asm volatile ( "cpsid i" ::: "memory" );
-            __asm volatile ( "dsb" );
-            __asm volatile ( "isb" );
-
-            /* Disable the SysTick clock without reading the
-             * portNVIC_SYSTICK_CTRL_REG register to ensure the
-             * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.
-             * Again, the time the SysTick is stopped for is accounted for as
-             * best it can be, but using the tickless mode will inevitably
-             * result in some tiny drift of the time maintained by the kernel
-             * with respect to calendar time*/
-            portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
-
-            /* Determine if the SysTick clock has already counted to zero and
-             * been set back to the current reload value (the reload back being
-             * correct for the entire expected idle time) or if the SysTick is
-             * yet to count to zero (in which case an interrupt other than the
-             * SysTick must have brought the system out of sleep mode). */
-            if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
-            {
-                uint32_t ulCalculatedLoadValue;
-
-                /* The tick interrupt is already pending, and the SysTick count
-                 * reloaded with ulReloadValue.  Reset the
-                 * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
-                 * period. */
-                ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
-
-                /* Don't allow a tiny value, or values that have somehow
-                 * underflowed because the post sleep hook did something
-                 * that took too long. */
-                if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
-                {
-                    ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
-                }
-
-                portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
-
-                /* As the pending tick will be processed as soon as this
-                 * function exits, the tick value maintained by the tick is
-                 * stepped forward by one less than the time spent waiting. */
-                ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
-            }
-            else
-            {
-                /* Something other than the tick interrupt ended the sleep.
-                 * Work out how long the sleep lasted rounded to complete tick
-                 * periods (not the ulReload value which accounted for part
-                 * ticks). */
-                ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-                /* How many complete tick periods passed while the processor
-                 * was waiting? */
-                ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
-
-                /* The reload value is set to whatever fraction of a single tick
-                 * period remains. */
-                portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
-            }
-
-            /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
-             * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
-             * value. */
-            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-            vTaskStepTick( ulCompleteTickPeriods );
-            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-
-            /* Exit with interrupts enabled. */
-            __asm volatile ( "cpsie i" ::: "memory" );
-        }
-    }
-#endif /* configUSE_TICKLESS_IDLE */
-/*-----------------------------------------------------------*/
-
-__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Calculate the constants required to configure the tick interrupt. */
-    #if ( configUSE_TICKLESS_IDLE == 1 )
-        {
-            ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
-            xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
-            ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
-        }
-    #endif /* configUSE_TICKLESS_IDLE */
-
-    /* Stop and reset the SysTick. */
-    portNVIC_SYSTICK_CTRL_REG = 0UL;
-    portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-
-    /* Configure SysTick to interrupt at the requested rate. */
-    portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
-    portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
-}
-/*-----------------------------------------------------------*/
-
-static void prvTaskExitError( void )
-{
-    volatile uint32_t ulDummy = 0UL;
-
-    /* A function that implements a task must not exit or attempt to return to
-     * its caller as there is nothing to return to. If a task wants to exit it
-     * should instead call vTaskDelete( NULL ). Artificially force an assert()
-     * to be triggered if configASSERT() is defined, then stop here so
-     * application writers can catch the error. */
-    configASSERT( ulCriticalNesting == ~0UL );
-    portDISABLE_INTERRUPTS();
-
-    while( ulDummy == 0 )
-    {
-        /* This file calls prvTaskExitError() after the scheduler has been
-         * started to remove a compiler warning about the function being
-         * defined but never called.  ulDummy is used purely to quieten other
-         * warnings about code appearing after this function is called - making
-         * ulDummy volatile makes the compiler think the function could return
-         * and therefore not output an 'unreachable code' warning for code that
-         * appears after it. */
-    }
-}
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_MPU == 1 )
-    static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
-    {
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __privileged_functions_start__;
-            extern uint32_t * __privileged_functions_end__;
-            extern uint32_t * __syscalls_flash_start__;
-            extern uint32_t * __syscalls_flash_end__;
-            extern uint32_t * __unprivileged_flash_start__;
-            extern uint32_t * __unprivileged_flash_end__;
-            extern uint32_t * __privileged_sram_start__;
-            extern uint32_t * __privileged_sram_end__;
-        #else /* if defined( __ARMCC_VERSION ) */
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __privileged_functions_start__[];
-            extern uint32_t __privileged_functions_end__[];
-            extern uint32_t __syscalls_flash_start__[];
-            extern uint32_t __syscalls_flash_end__[];
-            extern uint32_t __unprivileged_flash_start__[];
-            extern uint32_t __unprivileged_flash_end__[];
-            extern uint32_t __privileged_sram_start__[];
-            extern uint32_t __privileged_sram_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-
-        /* Check that the MPU is present. */
-        if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
-        {
-            /* MAIR0 - Index 0. */
-            portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
-            /* MAIR0 - Index 1. */
-            portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
-
-            /* Setup privileged flash as Read Only so that privileged tasks can
-             * read it but not modify. */
-            portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_PRIVILEGED_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup unprivileged flash as Read Only by both privileged and
-             * unprivileged tasks. All tasks can read it but no-one can modify. */
-            portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup unprivileged syscalls flash as Read Only by both privileged
-             * and unprivileged tasks. All tasks can read it but no-one can modify. */
-            portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_READ_ONLY );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Setup RAM containing kernel data for privileged access only. */
-            portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
-            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
-                               ( portMPU_REGION_NON_SHAREABLE ) |
-                               ( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
-                               ( portMPU_REGION_EXECUTE_NEVER );
-            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
-                               ( portMPU_RLAR_ATTR_INDEX0 ) |
-                               ( portMPU_RLAR_REGION_ENABLE );
-
-            /* Enable mem fault. */
-            portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE_BIT;
-
-            /* Enable MPU with privileged background access i.e. unmapped
-             * regions have privileged access. */
-            portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE_BIT | portMPU_ENABLE_BIT );
-        }
-    }
-#endif /* configENABLE_MPU */
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_FPU == 1 )
-    static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
-    {
-        #if ( configENABLE_TRUSTZONE == 1 )
-            {
-                /* Enable non-secure access to the FPU. */
-                SecureInit_EnableNSFPUAccess();
-            }
-        #endif /* configENABLE_TRUSTZONE */
-
-        /* CP10 = 11 ==> Full access to FPU i.e. both privileged and
-         * unprivileged code should be able to access FPU. CP11 should be
-         * programmed to the same value as CP10. */
-        *( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
-                            ( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
-                            );
-
-        /* ASPEN = 1 ==> Hardware should automatically preserve floating point
-         * context on exception entry and restore on exception return.
-         * LSPEN = 1 ==> Enable lazy context save of FP state. */
-        *( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
-    }
-#endif /* configENABLE_FPU */
-/*-----------------------------------------------------------*/
-
-void vPortYield( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Set a PendSV to request a context switch. */
-    portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-
-    /* Barriers are normally not required but do ensure the code is
-     * completely within the specified behaviour for the architecture. */
-    __asm volatile ( "dsb" ::: "memory" );
-    __asm volatile ( "isb" );
-}
-/*-----------------------------------------------------------*/
-
-void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
-{
-    portDISABLE_INTERRUPTS();
-    ulCriticalNesting++;
-
-    /* Barriers are normally not required but do ensure the code is
-     * completely within the specified behaviour for the architecture. */
-    __asm volatile ( "dsb" ::: "memory" );
-    __asm volatile ( "isb" );
-}
-/*-----------------------------------------------------------*/
-
-void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
-{
-    configASSERT( ulCriticalNesting );
-    ulCriticalNesting--;
-
-    if( ulCriticalNesting == 0 )
-    {
-        portENABLE_INTERRUPTS();
-    }
-}
-/*-----------------------------------------------------------*/
-
-void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
-{
-    uint32_t ulPreviousMask;
-
-    ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
-    {
-        /* Increment the RTOS tick. */
-        if( xTaskIncrementTick() != pdFALSE )
-        {
-            /* Pend a context switch. */
-            portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-        }
-    }
-    portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
-}
-/*-----------------------------------------------------------*/
-
-void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
-{
-    #if ( configENABLE_MPU == 1 )
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __syscalls_flash_start__;
-            extern uint32_t * __syscalls_flash_end__;
-        #else
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __syscalls_flash_start__[];
-            extern uint32_t __syscalls_flash_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-    #endif /* configENABLE_MPU */
-
-    uint32_t ulPC;
-
-    #if ( configENABLE_TRUSTZONE == 1 )
-        uint32_t ulR0;
-        #if ( configENABLE_MPU == 1 )
-            uint32_t ulControl, ulIsTaskPrivileged;
-        #endif /* configENABLE_MPU */
-    #endif /* configENABLE_TRUSTZONE */
-    uint8_t ucSVCNumber;
-
-    /* Register are stored on the stack in the following order - R0, R1, R2, R3,
-     * R12, LR, PC, xPSR. */
-    ulPC = pulCallerStackAddress[ 6 ];
-    ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ];
-
-    switch( ucSVCNumber )
-    {
-        #if ( configENABLE_TRUSTZONE == 1 )
-            case portSVC_ALLOCATE_SECURE_CONTEXT:
-
-                /* R0 contains the stack size passed as parameter to the
-                 * vPortAllocateSecureContext function. */
-                ulR0 = pulCallerStackAddress[ 0 ];
-
-                #if ( configENABLE_MPU == 1 )
-                    {
-                        /* Read the CONTROL register value. */
-                        __asm volatile ( "mrs %0, control"  : "=r" ( ulControl ) );
-
-                        /* The task that raised the SVC is privileged if Bit[0]
-                         * in the CONTROL register is 0. */
-                        ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
-
-                        /* Allocate and load a context for the secure task. */
-                        xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
-                    }
-                #else /* if ( configENABLE_MPU == 1 ) */
-                    {
-                        /* Allocate and load a context for the secure task. */
-                        xSecureContext = SecureContext_AllocateContext( ulR0 );
-                    }
-                #endif /* configENABLE_MPU */
-
-                configASSERT( xSecureContext != NULL );
-                SecureContext_LoadContext( xSecureContext );
-                break;
-
-            case portSVC_FREE_SECURE_CONTEXT:
-                /* R0 contains the secure context handle to be freed. */
-                ulR0 = pulCallerStackAddress[ 0 ];
-
-                /* Free the secure context. */
-                SecureContext_FreeContext( ( SecureContextHandle_t ) ulR0 );
-                break;
-        #endif /* configENABLE_TRUSTZONE */
-
-        case portSVC_START_SCHEDULER:
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    /* De-prioritize the non-secure exceptions so that the
-                     * non-secure pendSV runs at the lowest priority. */
-                    SecureInit_DePrioritizeNSExceptions();
-
-                    /* Initialize the secure context management system. */
-                    SecureContext_Init();
-                }
-            #endif /* configENABLE_TRUSTZONE */
-
-            #if ( configENABLE_FPU == 1 )
-                {
-                    /* Setup the Floating Point Unit (FPU). */
-                    prvSetupFPU();
-                }
-            #endif /* configENABLE_FPU */
-
-            /* Setup the context of the first task so that the first task starts
-             * executing. */
-            vRestoreContextOfFirstTask();
-            break;
-
-            #if ( configENABLE_MPU == 1 )
-                case portSVC_RAISE_PRIVILEGE:
-
-                    /* Only raise the privilege, if the svc was raised from any of
-                     * the system calls. */
-                    if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) &&
-                        ( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) )
-                    {
-                        vRaisePrivilege();
-                    }
-                    break;
-            #endif /* configENABLE_MPU */
-
-        default:
-            /* Incorrect SVC call. */
-            configASSERT( pdFALSE );
-    }
-}
-/*-----------------------------------------------------------*/
-
-/* *INDENT-OFF* */
-#if ( configENABLE_MPU == 1 )
-    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
-                                         StackType_t * pxEndOfStack,
-                                         TaskFunction_t pxCode,
-                                         void * pvParameters,
-                                         BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
-#else
-    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
-                                         StackType_t * pxEndOfStack,
-                                         TaskFunction_t pxCode,
-                                         void * pvParameters ) /* PRIVILEGED_FUNCTION */
-#endif /* configENABLE_MPU */
-/* *INDENT-ON* */
-{
-    /* Simulate the stack frame as it would be created by a context switch
-     * interrupt. */
-    #if ( portPRELOAD_REGISTERS == 0 )
-        {
-            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
-            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
-            pxTopOfStack -= 5;                                       /* R12, R3, R2 and R1. */
-            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
-            pxTopOfStack -= 9;                                       /* R11..R4, EXC_RETURN. */
-            *pxTopOfStack = portINITIAL_EXC_RETURN;
-
-            #if ( configENABLE_MPU == 1 )
-                {
-                    pxTopOfStack--;
-
-                    if( xRunPrivileged == pdTRUE )
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                    else
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                }
-            #endif /* configENABLE_MPU */
-
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
-
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    pxTopOfStack--;
-                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
-                }
-            #endif /* configENABLE_TRUSTZONE */
-        }
-    #else /* portPRELOAD_REGISTERS */
-        {
-            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
-            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x12121212UL;            /* R12 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x03030303UL;            /* R3 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x02020202UL;            /* R2 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x01010101UL;            /* R1 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x11111111UL;            /* R11 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x10101010UL;            /* R10 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x09090909UL;            /* R09 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x08080808UL;            /* R08 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x07070707UL;            /* R07 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x06060606UL;            /* R06 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x05050505UL;            /* R05 */
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) 0x04040404UL;            /* R04 */
-            pxTopOfStack--;
-            *pxTopOfStack = portINITIAL_EXC_RETURN;                  /* EXC_RETURN */
-
-            #if ( configENABLE_MPU == 1 )
-                {
-                    pxTopOfStack--;
-
-                    if( xRunPrivileged == pdTRUE )
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                    else
-                    {
-                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
-                    }
-                }
-            #endif /* configENABLE_MPU */
-
-            pxTopOfStack--;
-            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
-
-            #if ( configENABLE_TRUSTZONE == 1 )
-                {
-                    pxTopOfStack--;
-                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
-                }
-            #endif /* configENABLE_TRUSTZONE */
-        }
-    #endif /* portPRELOAD_REGISTERS */
-
-    return pxTopOfStack;
-}
-/*-----------------------------------------------------------*/
-
-BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Make PendSV, CallSV and SysTick the same priority as the kernel. */
-    portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
-    portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
-
-    #if ( configENABLE_MPU == 1 )
-        {
-            /* Setup the Memory Protection Unit (MPU). */
-            prvSetupMPU();
-        }
-    #endif /* configENABLE_MPU */
-
-    /* Start the timer that generates the tick ISR. Interrupts are disabled
-     * here already. */
-    vPortSetupTimerInterrupt();
-
-    /* Initialize the critical nesting count ready for the first task. */
-    ulCriticalNesting = 0;
-
-    /* Start the first task. */
-    vStartFirstTask();
-
-    /* Should never get here as the tasks will now be executing. Call the task
-     * exit error function to prevent compiler warnings about a static function
-     * not being called in the case that the application writer overrides this
-     * functionality by defining configTASK_RETURN_ADDRESS. Call
-     * vTaskSwitchContext() so link time optimization does not remove the
-     * symbol. */
-    vTaskSwitchContext();
-    prvTaskExitError();
-
-    /* Should not get here. */
-    return 0;
-}
-/*-----------------------------------------------------------*/
-
-void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
-{
-    /* Not implemented in ports where there is nothing to return to.
-     * Artificially force an assert. */
-    configASSERT( ulCriticalNesting == 1000UL );
-}
-/*-----------------------------------------------------------*/
-
-#if ( configENABLE_MPU == 1 )
-    void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
-                                    const struct xMEMORY_REGION * const xRegions,
-                                    StackType_t * pxBottomOfStack,
-                                    uint32_t ulStackDepth )
-    {
-        uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
-        int32_t lIndex = 0;
-
-        #if defined( __ARMCC_VERSION )
-
-            /* Declaration when these variable are defined in code instead of being
-             * exported from linker scripts. */
-            extern uint32_t * __privileged_sram_start__;
-            extern uint32_t * __privileged_sram_end__;
-        #else
-            /* Declaration when these variable are exported from linker scripts. */
-            extern uint32_t __privileged_sram_start__[];
-            extern uint32_t __privileged_sram_end__[];
-        #endif /* defined( __ARMCC_VERSION ) */
-
-        /* Setup MAIR0. */
-        xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
-        xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
-
-        /* This function is called automatically when the task is created - in
-         * which case the stack region parameters will be valid.  At all other
-         * times the stack parameters will not be valid and it is assumed that
-         * the stack region has already been configured. */
-        if( ulStackDepth > 0 )
-        {
-            ulRegionStartAddress = ( uint32_t ) pxBottomOfStack;
-            ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) - 1;
-
-            /* If the stack is within the privileged SRAM, do not protect it
-             * using a separate MPU region. This is needed because privileged
-             * SRAM is already protected using an MPU region and ARMv8-M does
-             * not allow overlapping MPU regions. */
-            if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
-                ( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
-            {
-                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
-                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
-            }
-            else
-            {
-                /* Define the region that allows access to the stack. */
-                ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
-                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
-
-                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
-                                                             ( portMPU_REGION_NON_SHAREABLE ) |
-                                                             ( portMPU_REGION_READ_WRITE ) |
-                                                             ( portMPU_REGION_EXECUTE_NEVER );
-
-                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
-                                                             ( portMPU_RLAR_ATTR_INDEX0 ) |
-                                                             ( portMPU_RLAR_REGION_ENABLE );
-            }
-        }
-
-        /* User supplied configurable regions. */
-        for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
-        {
-            /* If xRegions is NULL i.e. the task has not specified any MPU
-             * region, the else part ensures that all the configurable MPU
-             * regions are invalidated. */
-            if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
-            {
-                /* Translate the generic region definition contained in xRegions
-                 * into the ARMv8 specific MPU settings that are then stored in
-                 * xMPUSettings. */
-                ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
-                ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
-                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
-
-                /* Start address. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
-                                                                          ( portMPU_REGION_NON_SHAREABLE );
-
-                /* RO/RW. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
-                }
-                else
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
-                }
-
-                /* XN. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
-                {
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
-                }
-
-                /* End Address. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
-                                                                          ( portMPU_RLAR_REGION_ENABLE );
-
-                /* Normal memory/ Device memory. */
-                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
-                {
-                    /* Attr1 in MAIR0 is configured as device memory. */
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
-                }
-                else
-                {
-                    /* Attr1 in MAIR0 is configured as normal memory. */
-                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
-                }
-            }
-            else
-            {
-                /* Invalidate the region. */
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
-                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
-            }
-
-            lIndex++;
-        }
-    }
-#endif /* configENABLE_MPU */
-/*-----------------------------------------------------------*/
-
-BaseType_t xPortIsInsideInterrupt( void )
-{
-    uint32_t ulCurrentInterrupt;
-    BaseType_t xReturn;
-
-    /* Obtain the number of the currently executing interrupt. Interrupt Program
-     * Status Register (IPSR) holds the exception number of the currently-executing
-     * exception or zero for Thread mode.*/
-    __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
-
-    if( ulCurrentInterrupt == 0 )
-    {
-        xReturn = pdFALSE;
-    }
-    else
-    {
-        xReturn = pdTRUE;
-    }
-
-    return xReturn;
-}
-/*-----------------------------------------------------------*/
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ */
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+ * all the API functions to use the MPU wrappers. That should only be done when
+ * task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* MPU wrappers includes. */
+#include "mpu_wrappers.h"
+
+/* Portasm includes. */
+#include "portasm.h"
+
+#if ( configENABLE_TRUSTZONE == 1 )
+    /* Secure components includes. */
+    #include "secure_context.h"
+    #include "secure_init.h"
+#endif /* configENABLE_TRUSTZONE */
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/**
+ * The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
+ * i.e. the processor boots as secure and never jumps to the non-secure side.
+ * The Trust Zone support in the port must be disabled in order to run FreeRTOS
+ * on the secure side. The following are the valid configuration seetings:
+ *
+ * 1. Run FreeRTOS on the Secure Side:
+ *		configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
+ *
+ * 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
+ *		configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
+ *
+ * 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
+ *		configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
+ */
+#if ( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
+    #error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
+#endif
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the NVIC.
+ */
+#define portNVIC_SYSTICK_CTRL_REG             ( *( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG             ( *( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG    ( *( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_SHPR3_REG                    ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
+#define portNVIC_SYSTICK_ENABLE_BIT           ( 1UL << 0UL )
+#define portNVIC_SYSTICK_INT_BIT              ( 1UL << 1UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT       ( 1UL << 16UL )
+#define portMIN_INTERRUPT_PRIORITY            ( 255UL )
+#define portNVIC_PENDSV_PRI                   ( portMIN_INTERRUPT_PRIORITY << 16UL )
+#define portNVIC_SYSTICK_PRI                  ( portMIN_INTERRUPT_PRIORITY << 24UL )
+#ifndef configSYSTICK_CLOCK_HZ
+    #define configSYSTICK_CLOCK_HZ            configCPU_CLOCK_HZ
+    /* Ensure the SysTick is clocked at the same frequency as the core. */
+    #define portNVIC_SYSTICK_CLK_BIT          ( 1UL << 2UL )
+#else
+
+/* The way the SysTick is clocked is not modified in case it is not the
+ * same a the core. */
+    #define portNVIC_SYSTICK_CLK_BIT    ( 0 )
+#endif
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the SCB.
+ */
+#define portSCB_SYS_HANDLER_CTRL_STATE_REG    ( *( volatile uint32_t * ) 0xe000ed24 )
+#define portSCB_MEM_FAULT_ENABLE_BIT          ( 1UL << 16UL )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the FPU.
+ */
+#define portCPACR               ( ( volatile uint32_t * ) 0xe000ed88 )              /* Coprocessor Access Control Register. */
+#define portCPACR_CP10_VALUE    ( 3UL )
+#define portCPACR_CP11_VALUE    portCPACR_CP10_VALUE
+#define portCPACR_CP10_POS      ( 20UL )
+#define portCPACR_CP11_POS      ( 22UL )
+
+#define portFPCCR               ( ( volatile uint32_t * ) 0xe000ef34 )              /* Floating Point Context Control Register. */
+#define portFPCCR_ASPEN_POS     ( 31UL )
+#define portFPCCR_ASPEN_MASK    ( 1UL << portFPCCR_ASPEN_POS )
+#define portFPCCR_LSPEN_POS     ( 30UL )
+#define portFPCCR_LSPEN_MASK    ( 1UL << portFPCCR_LSPEN_POS )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to manipulate the MPU.
+ */
+#define portMPU_TYPE_REG                      ( *( ( volatile uint32_t * ) 0xe000ed90 ) )
+#define portMPU_CTRL_REG                      ( *( ( volatile uint32_t * ) 0xe000ed94 ) )
+#define portMPU_RNR_REG                       ( *( ( volatile uint32_t * ) 0xe000ed98 ) )
+
+#define portMPU_RBAR_REG                      ( *( ( volatile uint32_t * ) 0xe000ed9c ) )
+#define portMPU_RLAR_REG                      ( *( ( volatile uint32_t * ) 0xe000eda0 ) )
+
+#define portMPU_RBAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda4 ) )
+#define portMPU_RLAR_A1_REG                   ( *( ( volatile uint32_t * ) 0xe000eda8 ) )
+
+#define portMPU_RBAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edac ) )
+#define portMPU_RLAR_A2_REG                   ( *( ( volatile uint32_t * ) 0xe000edb0 ) )
+
+#define portMPU_RBAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb4 ) )
+#define portMPU_RLAR_A3_REG                   ( *( ( volatile uint32_t * ) 0xe000edb8 ) )
+
+#define portMPU_MAIR0_REG                     ( *( ( volatile uint32_t * ) 0xe000edc0 ) )
+#define portMPU_MAIR1_REG                     ( *( ( volatile uint32_t * ) 0xe000edc4 ) )
+
+#define portMPU_RBAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
+#define portMPU_RLAR_ADDRESS_MASK             ( 0xffffffe0 ) /* Must be 32-byte aligned. */
+
+#define portMPU_MAIR_ATTR0_POS                ( 0UL )
+#define portMPU_MAIR_ATTR0_MASK               ( 0x000000ff )
+
+#define portMPU_MAIR_ATTR1_POS                ( 8UL )
+#define portMPU_MAIR_ATTR1_MASK               ( 0x0000ff00 )
+
+#define portMPU_MAIR_ATTR2_POS                ( 16UL )
+#define portMPU_MAIR_ATTR2_MASK               ( 0x00ff0000 )
+
+#define portMPU_MAIR_ATTR3_POS                ( 24UL )
+#define portMPU_MAIR_ATTR3_MASK               ( 0xff000000 )
+
+#define portMPU_MAIR_ATTR4_POS                ( 0UL )
+#define portMPU_MAIR_ATTR4_MASK               ( 0x000000ff )
+
+#define portMPU_MAIR_ATTR5_POS                ( 8UL )
+#define portMPU_MAIR_ATTR5_MASK               ( 0x0000ff00 )
+
+#define portMPU_MAIR_ATTR6_POS                ( 16UL )
+#define portMPU_MAIR_ATTR6_MASK               ( 0x00ff0000 )
+
+#define portMPU_MAIR_ATTR7_POS                ( 24UL )
+#define portMPU_MAIR_ATTR7_MASK               ( 0xff000000 )
+
+#define portMPU_RLAR_ATTR_INDEX0              ( 0UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX1              ( 1UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX2              ( 2UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX3              ( 3UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX4              ( 4UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX5              ( 5UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX6              ( 6UL << 1UL )
+#define portMPU_RLAR_ATTR_INDEX7              ( 7UL << 1UL )
+
+#define portMPU_RLAR_REGION_ENABLE            ( 1UL )
+
+/* Enable privileged access to unmapped region. */
+#define portMPU_PRIV_BACKGROUND_ENABLE_BIT    ( 1UL << 2UL )
+
+/* Enable MPU. */
+#define portMPU_ENABLE_BIT                    ( 1UL << 0UL )
+
+/* Expected value of the portMPU_TYPE register. */
+#define portEXPECTED_MPU_TYPE_VALUE           ( 8UL << 8UL ) /* 8 regions, unified. */
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief The maximum 24-bit number.
+ *
+ * It is needed because the systick is a 24-bit counter.
+ */
+#define portMAX_24_BIT_NUMBER       ( 0xffffffUL )
+
+/**
+ * @brief A fiddle factor to estimate the number of SysTick counts that would
+ * have occurred while the SysTick counter is stopped during tickless idle
+ * calculations.
+ */
+#define portMISSED_COUNTS_FACTOR    ( 45UL )
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Constants required to set up the initial stack.
+ */
+#define portINITIAL_XPSR    ( 0x01000000 )
+
+#if ( configRUN_FREERTOS_SECURE_ONLY == 1 )
+
+/**
+ * @brief Initial EXC_RETURN value.
+ *
+ *     FF         FF         FF         FD
+ * 1111 1111  1111 1111  1111 1111  1111 1101
+ *
+ * Bit[6] - 1 --> The exception was taken from the Secure state.
+ * Bit[5] - 1 --> Do not skip stacking of additional state context.
+ * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
+ * Bit[3] - 1 --> Return to the Thread mode.
+ * Bit[2] - 1 --> Restore registers from the process stack.
+ * Bit[1] - 0 --> Reserved, 0.
+ * Bit[0] - 1 --> The exception was taken to the Secure state.
+ */
+    #define portINITIAL_EXC_RETURN    ( 0xfffffffd )
+#else
+
+/**
+ * @brief Initial EXC_RETURN value.
+ *
+ *     FF         FF         FF         BC
+ * 1111 1111  1111 1111  1111 1111  1011 1100
+ *
+ * Bit[6] - 0 --> The exception was taken from the Non-Secure state.
+ * Bit[5] - 1 --> Do not skip stacking of additional state context.
+ * Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
+ * Bit[3] - 1 --> Return to the Thread mode.
+ * Bit[2] - 1 --> Restore registers from the process stack.
+ * Bit[1] - 0 --> Reserved, 0.
+ * Bit[0] - 0 --> The exception was taken to the Non-Secure state.
+ */
+    #define portINITIAL_EXC_RETURN    ( 0xffffffbc )
+#endif /* configRUN_FREERTOS_SECURE_ONLY */
+
+/**
+ * @brief CONTROL register privileged bit mask.
+ *
+ * Bit[0] in CONTROL register tells the privilege:
+ *  Bit[0] = 0 ==> The task is privileged.
+ *  Bit[0] = 1 ==> The task is not privileged.
+ */
+#define portCONTROL_PRIVILEGED_MASK         ( 1UL << 0UL )
+
+/**
+ * @brief Initial CONTROL register values.
+ */
+#define portINITIAL_CONTROL_UNPRIVILEGED    ( 0x3 )
+#define portINITIAL_CONTROL_PRIVILEGED      ( 0x2 )
+
+/**
+ * @brief Let the user override the pre-loading of the initial LR with the
+ * address of prvTaskExitError() in case it messes up unwinding of the stack
+ * in the debugger.
+ */
+#ifdef configTASK_RETURN_ADDRESS
+    #define portTASK_RETURN_ADDRESS    configTASK_RETURN_ADDRESS
+#else
+    #define portTASK_RETURN_ADDRESS    prvTaskExitError
+#endif
+
+/**
+ * @brief If portPRELOAD_REGISTERS then registers will be given an initial value
+ * when a task is created. This helps in debugging at the cost of code size.
+ */
+#define portPRELOAD_REGISTERS    1
+
+/**
+ * @brief A task is created without a secure context, and must call
+ * portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
+ * any secure calls.
+ */
+#define portNO_SECURE_CONTEXT    0
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Used to catch tasks that attempt to return from their implementing
+ * function.
+ */
+static void prvTaskExitError( void );
+
+#if ( configENABLE_MPU == 1 )
+
+/**
+ * @brief Setup the Memory Protection Unit (MPU).
+ */
+    static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
+#endif /* configENABLE_MPU */
+
+#if ( configENABLE_FPU == 1 )
+
+/**
+ * @brief Setup the Floating Point Unit (FPU).
+ */
+    static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
+#endif /* configENABLE_FPU */
+
+/**
+ * @brief Setup the timer to generate the tick interrupts.
+ *
+ * The implementation in this file is weak to allow application writers to
+ * change the timer used to generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Checks whether the current execution context is interrupt.
+ *
+ * @return pdTRUE if the current execution context is interrupt, pdFALSE
+ * otherwise.
+ */
+BaseType_t xPortIsInsideInterrupt( void );
+
+/**
+ * @brief Yield the processor.
+ */
+void vPortYield( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Enter critical section.
+ */
+void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief Exit from critical section.
+ */
+void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief SysTick handler.
+ */
+void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * @brief C part of SVC handler.
+ */
+portDONT_DISCARD void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) PRIVILEGED_FUNCTION;
+/*-----------------------------------------------------------*/
+
+/**
+ * @brief Each task maintains its own interrupt status in the critical nesting
+ * variable.
+ */
+PRIVILEGED_DATA static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
+
+#if ( configENABLE_TRUSTZONE == 1 )
+
+/**
+ * @brief Saved as part of the task context to indicate which context the
+ * task is using on the secure side.
+ */
+    PRIVILEGED_DATA portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
+#endif /* configENABLE_TRUSTZONE */
+
+#if ( configUSE_TICKLESS_IDLE == 1 )
+
+/**
+ * @brief The number of SysTick increments that make up one tick period.
+ */
+    PRIVILEGED_DATA static uint32_t ulTimerCountsForOneTick = 0;
+
+/**
+ * @brief The maximum number of tick periods that can be suppressed is
+ * limited by the 24 bit resolution of the SysTick timer.
+ */
+    PRIVILEGED_DATA static uint32_t xMaximumPossibleSuppressedTicks = 0;
+
+/**
+ * @brief Compensate for the CPU cycles that pass while the SysTick is
+ * stopped (low power functionality only).
+ */
+    PRIVILEGED_DATA static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TICKLESS_IDLE == 1 )
+    __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+    {
+        uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
+        TickType_t xModifiableIdleTime;
+
+        /* Make sure the SysTick reload value does not overflow the counter. */
+        if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+        {
+            xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+        }
+
+        /* Stop the SysTick momentarily. The time the SysTick is stopped for is
+         * accounted for as best it can be, but using the tickless mode will
+         * inevitably result in some tiny drift of the time maintained by the
+         * kernel with respect to calendar time. */
+        portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+        /* Calculate the reload value required to wait xExpectedIdleTime
+         * tick periods. -1 is used because this code will execute part way
+         * through one of the tick periods. */
+        ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+
+        if( ulReloadValue > ulStoppedTimerCompensation )
+        {
+            ulReloadValue -= ulStoppedTimerCompensation;
+        }
+
+        /* Enter a critical section but don't use the taskENTER_CRITICAL()
+         * method as that will mask interrupts that should exit sleep mode. */
+        __asm volatile ( "cpsid i" ::: "memory" );
+        __asm volatile ( "dsb" );
+        __asm volatile ( "isb" );
+
+        /* If a context switch is pending or a task is waiting for the scheduler
+         * to be un-suspended then abandon the low power entry. */
+        if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+        {
+            /* Restart from whatever is left in the count register to complete
+             * this tick period. */
+            portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Reset the reload register to the value required for normal tick
+             * periods. */
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Re-enable interrupts - see comments above the cpsid instruction()
+             * above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+        else
+        {
+            /* Set the new reload value. */
+            portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+            /* Clear the SysTick count flag and set the count value back to
+             * zero. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
+             * set its parameter to 0 to indicate that its implementation
+             * contains its own wait for interrupt or wait for event
+             * instruction, and so wfi should not be executed again. However,
+             * the original expected idle time variable must remain unmodified,
+             * so a copy is taken. */
+            xModifiableIdleTime = xExpectedIdleTime;
+            configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+
+            if( xModifiableIdleTime > 0 )
+            {
+                __asm volatile ( "dsb" ::: "memory" );
+                __asm volatile ( "wfi" );
+                __asm volatile ( "isb" );
+            }
+
+            configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+            /* Re-enable interrupts to allow the interrupt that brought the MCU
+             * out of sleep mode to execute immediately. See comments above
+             * the cpsid instruction above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable interrupts again because the clock is about to be stopped
+             * and interrupts that execute while the clock is stopped will
+             * increase any slippage between the time maintained by the RTOS and
+             * calendar time. */
+            __asm volatile ( "cpsid i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable the SysTick clock without reading the
+             * portNVIC_SYSTICK_CTRL_REG register to ensure the
+             * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.
+             * Again, the time the SysTick is stopped for is accounted for as
+             * best it can be, but using the tickless mode will inevitably
+             * result in some tiny drift of the time maintained by the kernel
+             * with respect to calendar time*/
+            portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
+
+            /* Determine if the SysTick clock has already counted to zero and
+             * been set back to the current reload value (the reload back being
+             * correct for the entire expected idle time) or if the SysTick is
+             * yet to count to zero (in which case an interrupt other than the
+             * SysTick must have brought the system out of sleep mode). */
+            if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+            {
+                uint32_t ulCalculatedLoadValue;
+
+                /* The tick interrupt is already pending, and the SysTick count
+                 * reloaded with ulReloadValue.  Reset the
+                 * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+                 * period. */
+                ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+                /* Don't allow a tiny value, or values that have somehow
+                 * underflowed because the post sleep hook did something
+                 * that took too long. */
+                if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+                {
+                    ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+                }
+
+                portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+                /* As the pending tick will be processed as soon as this
+                 * function exits, the tick value maintained by the tick is
+                 * stepped forward by one less than the time spent waiting. */
+                ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+            }
+            else
+            {
+                /* Something other than the tick interrupt ended the sleep.
+                 * Work out how long the sleep lasted rounded to complete tick
+                 * periods (not the ulReload value which accounted for part
+                 * ticks). */
+                ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+                /* How many complete tick periods passed while the processor
+                 * was waiting? */
+                ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+                /* The reload value is set to whatever fraction of a single tick
+                 * period remains. */
+                portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+            }
+
+            /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+             * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+             * value. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+            vTaskStepTick( ulCompleteTickPeriods );
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Exit with interrupts enabled. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+    }
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Calculate the constants required to configure the tick interrupt. */
+    #if ( configUSE_TICKLESS_IDLE == 1 )
+        {
+            ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
+            xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+            ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
+        }
+    #endif /* configUSE_TICKLESS_IDLE */
+
+    /* Stop and reset the SysTick. */
+    portNVIC_SYSTICK_CTRL_REG = 0UL;
+    portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+    /* Configure SysTick to interrupt at the requested rate. */
+    portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+    portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+    volatile uint32_t ulDummy = 0UL;
+
+    /* A function that implements a task must not exit or attempt to return to
+     * its caller as there is nothing to return to. If a task wants to exit it
+     * should instead call vTaskDelete( NULL ). Artificially force an assert()
+     * to be triggered if configASSERT() is defined, then stop here so
+     * application writers can catch the error. */
+    configASSERT( ulCriticalNesting == ~0UL );
+    portDISABLE_INTERRUPTS();
+
+    while( ulDummy == 0 )
+    {
+        /* This file calls prvTaskExitError() after the scheduler has been
+         * started to remove a compiler warning about the function being
+         * defined but never called.  ulDummy is used purely to quieten other
+         * warnings about code appearing after this function is called - making
+         * ulDummy volatile makes the compiler think the function could return
+         * and therefore not output an 'unreachable code' warning for code that
+         * appears after it. */
+    }
+}
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_MPU == 1 )
+    static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
+    {
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __privileged_functions_start__;
+            extern uint32_t * __privileged_functions_end__;
+            extern uint32_t * __syscalls_flash_start__;
+            extern uint32_t * __syscalls_flash_end__;
+            extern uint32_t * __unprivileged_flash_start__;
+            extern uint32_t * __unprivileged_flash_end__;
+            extern uint32_t * __privileged_sram_start__;
+            extern uint32_t * __privileged_sram_end__;
+        #else /* if defined( __ARMCC_VERSION ) */
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __privileged_functions_start__[];
+            extern uint32_t __privileged_functions_end__[];
+            extern uint32_t __syscalls_flash_start__[];
+            extern uint32_t __syscalls_flash_end__[];
+            extern uint32_t __unprivileged_flash_start__[];
+            extern uint32_t __unprivileged_flash_end__[];
+            extern uint32_t __privileged_sram_start__[];
+            extern uint32_t __privileged_sram_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+
+        /* Check that the MPU is present. */
+        if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
+        {
+            /* MAIR0 - Index 0. */
+            portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
+            /* MAIR0 - Index 1. */
+            portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
+
+            /* Setup privileged flash as Read Only so that privileged tasks can
+             * read it but not modify. */
+            portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_PRIVILEGED_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup unprivileged flash as Read Only by both privileged and
+             * unprivileged tasks. All tasks can read it but no-one can modify. */
+            portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup unprivileged syscalls flash as Read Only by both privileged
+             * and unprivileged tasks. All tasks can read it but no-one can modify. */
+            portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_READ_ONLY );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Setup RAM containing kernel data for privileged access only. */
+            portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
+            portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
+                               ( portMPU_REGION_NON_SHAREABLE ) |
+                               ( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
+                               ( portMPU_REGION_EXECUTE_NEVER );
+            portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
+                               ( portMPU_RLAR_ATTR_INDEX0 ) |
+                               ( portMPU_RLAR_REGION_ENABLE );
+
+            /* Enable mem fault. */
+            portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE_BIT;
+
+            /* Enable MPU with privileged background access i.e. unmapped
+             * regions have privileged access. */
+            portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE_BIT | portMPU_ENABLE_BIT );
+        }
+    }
+#endif /* configENABLE_MPU */
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_FPU == 1 )
+    static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
+    {
+        #if ( configENABLE_TRUSTZONE == 1 )
+            {
+                /* Enable non-secure access to the FPU. */
+                SecureInit_EnableNSFPUAccess();
+            }
+        #endif /* configENABLE_TRUSTZONE */
+
+        /* CP10 = 11 ==> Full access to FPU i.e. both privileged and
+         * unprivileged code should be able to access FPU. CP11 should be
+         * programmed to the same value as CP10. */
+        *( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
+                            ( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
+                            );
+
+        /* ASPEN = 1 ==> Hardware should automatically preserve floating point
+         * context on exception entry and restore on exception return.
+         * LSPEN = 1 ==> Enable lazy context save of FP state. */
+        *( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
+    }
+#endif /* configENABLE_FPU */
+/*-----------------------------------------------------------*/
+
+void vPortYield( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Set a PendSV to request a context switch. */
+    portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+
+    /* Barriers are normally not required but do ensure the code is
+     * completely within the specified behaviour for the architecture. */
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
+{
+    portDISABLE_INTERRUPTS();
+    ulCriticalNesting++;
+
+    /* Barriers are normally not required but do ensure the code is
+     * completely within the specified behaviour for the architecture. */
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
+{
+    configASSERT( ulCriticalNesting );
+    ulCriticalNesting--;
+
+    if( ulCriticalNesting == 0 )
+    {
+        portENABLE_INTERRUPTS();
+    }
+}
+/*-----------------------------------------------------------*/
+
+void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
+{
+    uint32_t ulPreviousMask;
+
+    ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
+    {
+        /* Increment the RTOS tick. */
+        if( xTaskIncrementTick() != pdFALSE )
+        {
+            /* Pend a context switch. */
+            portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+        }
+    }
+    portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
+}
+/*-----------------------------------------------------------*/
+
+void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
+{
+    #if ( configENABLE_MPU == 1 )
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __syscalls_flash_start__;
+            extern uint32_t * __syscalls_flash_end__;
+        #else
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __syscalls_flash_start__[];
+            extern uint32_t __syscalls_flash_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+    #endif /* configENABLE_MPU */
+
+    uint32_t ulPC;
+
+    #if ( configENABLE_TRUSTZONE == 1 )
+        uint32_t ulR0;
+        #if ( configENABLE_MPU == 1 )
+            uint32_t ulControl, ulIsTaskPrivileged;
+        #endif /* configENABLE_MPU */
+    #endif /* configENABLE_TRUSTZONE */
+    uint8_t ucSVCNumber;
+
+    /* Register are stored on the stack in the following order - R0, R1, R2, R3,
+     * R12, LR, PC, xPSR. */
+    ulPC = pulCallerStackAddress[ 6 ];
+    ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ];
+
+    switch( ucSVCNumber )
+    {
+        #if ( configENABLE_TRUSTZONE == 1 )
+            case portSVC_ALLOCATE_SECURE_CONTEXT:
+
+                /* R0 contains the stack size passed as parameter to the
+                 * vPortAllocateSecureContext function. */
+                ulR0 = pulCallerStackAddress[ 0 ];
+
+                #if ( configENABLE_MPU == 1 )
+                    {
+                        /* Read the CONTROL register value. */
+                        __asm volatile ( "mrs %0, control"  : "=r" ( ulControl ) );
+
+                        /* The task that raised the SVC is privileged if Bit[0]
+                         * in the CONTROL register is 0. */
+                        ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
+
+                        /* Allocate and load a context for the secure task. */
+                        xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
+                    }
+                #else /* if ( configENABLE_MPU == 1 ) */
+                    {
+                        /* Allocate and load a context for the secure task. */
+                        xSecureContext = SecureContext_AllocateContext( ulR0 );
+                    }
+                #endif /* configENABLE_MPU */
+
+                configASSERT( xSecureContext != NULL );
+                SecureContext_LoadContext( xSecureContext );
+                break;
+
+            case portSVC_FREE_SECURE_CONTEXT:
+                /* R0 contains the secure context handle to be freed. */
+                ulR0 = pulCallerStackAddress[ 0 ];
+
+                /* Free the secure context. */
+                SecureContext_FreeContext( ( SecureContextHandle_t ) ulR0 );
+                break;
+        #endif /* configENABLE_TRUSTZONE */
+
+        case portSVC_START_SCHEDULER:
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    /* De-prioritize the non-secure exceptions so that the
+                     * non-secure pendSV runs at the lowest priority. */
+                    SecureInit_DePrioritizeNSExceptions();
+
+                    /* Initialize the secure context management system. */
+                    SecureContext_Init();
+                }
+            #endif /* configENABLE_TRUSTZONE */
+
+            #if ( configENABLE_FPU == 1 )
+                {
+                    /* Setup the Floating Point Unit (FPU). */
+                    prvSetupFPU();
+                }
+            #endif /* configENABLE_FPU */
+
+            /* Setup the context of the first task so that the first task starts
+             * executing. */
+            vRestoreContextOfFirstTask();
+            break;
+
+            #if ( configENABLE_MPU == 1 )
+                case portSVC_RAISE_PRIVILEGE:
+
+                    /* Only raise the privilege, if the svc was raised from any of
+                     * the system calls. */
+                    if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) &&
+                        ( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) )
+                    {
+                        vRaisePrivilege();
+                    }
+                    break;
+            #endif /* configENABLE_MPU */
+
+        default:
+            /* Incorrect SVC call. */
+            configASSERT( pdFALSE );
+    }
+}
+/*-----------------------------------------------------------*/
+
+/* *INDENT-OFF* */
+#if ( configENABLE_MPU == 1 )
+    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
+                                         StackType_t * pxEndOfStack,
+                                         TaskFunction_t pxCode,
+                                         void * pvParameters,
+                                         BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
+#else
+    StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
+                                         StackType_t * pxEndOfStack,
+                                         TaskFunction_t pxCode,
+                                         void * pvParameters ) /* PRIVILEGED_FUNCTION */
+#endif /* configENABLE_MPU */
+/* *INDENT-ON* */
+{
+    /* Simulate the stack frame as it would be created by a context switch
+     * interrupt. */
+    #if ( portPRELOAD_REGISTERS == 0 )
+        {
+            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+            pxTopOfStack -= 5;                                       /* R12, R3, R2 and R1. */
+            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
+            pxTopOfStack -= 9;                                       /* R11..R4, EXC_RETURN. */
+            *pxTopOfStack = portINITIAL_EXC_RETURN;
+
+            #if ( configENABLE_MPU == 1 )
+                {
+                    pxTopOfStack--;
+
+                    if( xRunPrivileged == pdTRUE )
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                    else
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                }
+            #endif /* configENABLE_MPU */
+
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
+
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    pxTopOfStack--;
+                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
+                }
+            #endif /* configENABLE_TRUSTZONE */
+        }
+    #else /* portPRELOAD_REGISTERS */
+        {
+            pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+            *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x12121212UL;            /* R12 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x03030303UL;            /* R3 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x02020202UL;            /* R2 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x01010101UL;            /* R1 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x11111111UL;            /* R11 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x10101010UL;            /* R10 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x09090909UL;            /* R09 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x08080808UL;            /* R08 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x07070707UL;            /* R07 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x06060606UL;            /* R06 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x05050505UL;            /* R05 */
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) 0x04040404UL;            /* R04 */
+            pxTopOfStack--;
+            *pxTopOfStack = portINITIAL_EXC_RETURN;                  /* EXC_RETURN */
+
+            #if ( configENABLE_MPU == 1 )
+                {
+                    pxTopOfStack--;
+
+                    if( xRunPrivileged == pdTRUE )
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                    else
+                    {
+                        *pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
+                    }
+                }
+            #endif /* configENABLE_MPU */
+
+            pxTopOfStack--;
+            *pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
+
+            #if ( configENABLE_TRUSTZONE == 1 )
+                {
+                    pxTopOfStack--;
+                    *pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
+                }
+            #endif /* configENABLE_TRUSTZONE */
+        }
+    #endif /* portPRELOAD_REGISTERS */
+
+    return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Make PendSV, CallSV and SysTick the same priority as the kernel. */
+    portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
+    portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
+
+    #if ( configENABLE_MPU == 1 )
+        {
+            /* Setup the Memory Protection Unit (MPU). */
+            prvSetupMPU();
+        }
+    #endif /* configENABLE_MPU */
+
+    /* Start the timer that generates the tick ISR. Interrupts are disabled
+     * here already. */
+    vPortSetupTimerInterrupt();
+
+    /* Initialize the critical nesting count ready for the first task. */
+    ulCriticalNesting = 0;
+
+    /* Start the first task. */
+    vStartFirstTask();
+
+    /* Should never get here as the tasks will now be executing. Call the task
+     * exit error function to prevent compiler warnings about a static function
+     * not being called in the case that the application writer overrides this
+     * functionality by defining configTASK_RETURN_ADDRESS. Call
+     * vTaskSwitchContext() so link time optimization does not remove the
+     * symbol. */
+    vTaskSwitchContext();
+    prvTaskExitError();
+
+    /* Should not get here. */
+    return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
+{
+    /* Not implemented in ports where there is nothing to return to.
+     * Artificially force an assert. */
+    configASSERT( ulCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+#if ( configENABLE_MPU == 1 )
+    void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
+                                    const struct xMEMORY_REGION * const xRegions,
+                                    StackType_t * pxBottomOfStack,
+                                    uint32_t ulStackDepth )
+    {
+        uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
+        int32_t lIndex = 0;
+
+        #if defined( __ARMCC_VERSION )
+
+            /* Declaration when these variable are defined in code instead of being
+             * exported from linker scripts. */
+            extern uint32_t * __privileged_sram_start__;
+            extern uint32_t * __privileged_sram_end__;
+        #else
+            /* Declaration when these variable are exported from linker scripts. */
+            extern uint32_t __privileged_sram_start__[];
+            extern uint32_t __privileged_sram_end__[];
+        #endif /* defined( __ARMCC_VERSION ) */
+
+        /* Setup MAIR0. */
+        xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
+        xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
+
+        /* This function is called automatically when the task is created - in
+         * which case the stack region parameters will be valid.  At all other
+         * times the stack parameters will not be valid and it is assumed that
+         * the stack region has already been configured. */
+        if( ulStackDepth > 0 )
+        {
+            ulRegionStartAddress = ( uint32_t ) pxBottomOfStack;
+            ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) - 1;
+
+            /* If the stack is within the privileged SRAM, do not protect it
+             * using a separate MPU region. This is needed because privileged
+             * SRAM is already protected using an MPU region and ARMv8-M does
+             * not allow overlapping MPU regions. */
+            if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
+                ( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
+            {
+                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
+                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
+            }
+            else
+            {
+                /* Define the region that allows access to the stack. */
+                ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
+                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
+
+                xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
+                                                             ( portMPU_REGION_NON_SHAREABLE ) |
+                                                             ( portMPU_REGION_READ_WRITE ) |
+                                                             ( portMPU_REGION_EXECUTE_NEVER );
+
+                xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
+                                                             ( portMPU_RLAR_ATTR_INDEX0 ) |
+                                                             ( portMPU_RLAR_REGION_ENABLE );
+            }
+        }
+
+        /* User supplied configurable regions. */
+        for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
+        {
+            /* If xRegions is NULL i.e. the task has not specified any MPU
+             * region, the else part ensures that all the configurable MPU
+             * regions are invalidated. */
+            if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
+            {
+                /* Translate the generic region definition contained in xRegions
+                 * into the ARMv8 specific MPU settings that are then stored in
+                 * xMPUSettings. */
+                ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
+                ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
+                ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
+
+                /* Start address. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
+                                                                          ( portMPU_REGION_NON_SHAREABLE );
+
+                /* RO/RW. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
+                }
+                else
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
+                }
+
+                /* XN. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
+                {
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
+                }
+
+                /* End Address. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
+                                                                          ( portMPU_RLAR_REGION_ENABLE );
+
+                /* Normal memory/ Device memory. */
+                if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
+                {
+                    /* Attr1 in MAIR0 is configured as device memory. */
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
+                }
+                else
+                {
+                    /* Attr1 in MAIR0 is configured as normal memory. */
+                    xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
+                }
+            }
+            else
+            {
+                /* Invalidate the region. */
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
+                xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
+            }
+
+            lIndex++;
+        }
+    }
+#endif /* configENABLE_MPU */
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortIsInsideInterrupt( void )
+{
+    uint32_t ulCurrentInterrupt;
+    BaseType_t xReturn;
+
+    /* Obtain the number of the currently executing interrupt. Interrupt Program
+     * Status Register (IPSR) holds the exception number of the currently-executing
+     * exception or zero for Thread mode.*/
+    __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
+
+    if( ulCurrentInterrupt == 0 )
+    {
+        xReturn = pdFALSE;
+    }
+    else
+    {
+        xReturn = pdTRUE;
+    }
+
+    return xReturn;
+}
+/*-----------------------------------------------------------*/
diff --git a/portable/GCC/ARM_CM33_NTZ/non_secure/port.c b/portable/GCC/ARM_CM33_NTZ/non_secure/port.c
index 151ea8b..aabe5c2 100644
--- a/portable/GCC/ARM_CM33_NTZ/non_secure/port.c
+++ b/portable/GCC/ARM_CM33_NTZ/non_secure/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
diff --git a/portable/GCC/ARM_CM3_MPU/port.c b/portable/GCC/ARM_CM3_MPU/port.c
index d95503f..9830afd 100644
--- a/portable/GCC/ARM_CM3_MPU/port.c
+++ b/portable/GCC/ARM_CM3_MPU/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/GCC/ARM_CM4F/port.c b/portable/GCC/ARM_CM4F/port.c
index 43ca92f..ce2dffe 100644
--- a/portable/GCC/ARM_CM4F/port.c
+++ b/portable/GCC/ARM_CM4F/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/GCC/ARM_CM4_MPU/port.c b/portable/GCC/ARM_CM4_MPU/port.c
index 34ce94e..61d005e 100644
--- a/portable/GCC/ARM_CM4_MPU/port.c
+++ b/portable/GCC/ARM_CM4_MPU/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/GCC/ARM_CM4_MPU/portmacro.h b/portable/GCC/ARM_CM4_MPU/portmacro.h
index 7f247a2..18268c4 100644
--- a/portable/GCC/ARM_CM4_MPU/portmacro.h
+++ b/portable/GCC/ARM_CM4_MPU/portmacro.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
diff --git a/portable/GCC/ARM_CM7/r0p1/port.c b/portable/GCC/ARM_CM7/r0p1/port.c
index dc7ac7a..2361ff9 100644
--- a/portable/GCC/ARM_CM7/r0p1/port.c
+++ b/portable/GCC/ARM_CM7/r0p1/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/GCC/ARM_CR5/port.c b/portable/GCC/ARM_CR5/port.c
index 0e62131..8b162b1 100644
--- a/portable/GCC/ARM_CR5/port.c
+++ b/portable/GCC/ARM_CR5/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Standard includes. */
diff --git a/portable/GCC/AVR_AVRDx/port.c b/portable/GCC/AVR_AVRDx/port.c
index 0a995d8..a9727dd 100644
--- a/portable/GCC/AVR_AVRDx/port.c
+++ b/portable/GCC/AVR_AVRDx/port.c
@@ -23,7 +23,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #include <stdlib.h>
diff --git a/portable/GCC/AVR_AVRDx/portmacro.h b/portable/GCC/AVR_AVRDx/portmacro.h
index 99fd4b3..59f8050 100644
--- a/portable/GCC/AVR_AVRDx/portmacro.h
+++ b/portable/GCC/AVR_AVRDx/portmacro.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef PORTMACRO_H
diff --git a/portable/GCC/AVR_Mega0/port.c b/portable/GCC/AVR_Mega0/port.c
index c27b7cc..98bf302 100644
--- a/portable/GCC/AVR_Mega0/port.c
+++ b/portable/GCC/AVR_Mega0/port.c
@@ -23,7 +23,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #include <stdlib.h>
diff --git a/portable/GCC/AVR_Mega0/portmacro.h b/portable/GCC/AVR_Mega0/portmacro.h
index a464215..5ca5044 100644
--- a/portable/GCC/AVR_Mega0/portmacro.h
+++ b/portable/GCC/AVR_Mega0/portmacro.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef PORTMACRO_H
diff --git a/portable/IAR/ARM_CM0/port.c b/portable/IAR/ARM_CM0/port.c
index f38d0e1..284864b 100644
--- a/portable/IAR/ARM_CM0/port.c
+++ b/portable/IAR/ARM_CM0/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/IAR/ARM_CM23/non_secure/port.c b/portable/IAR/ARM_CM23/non_secure/port.c
index e0a0c7e..8c91b55 100644
--- a/portable/IAR/ARM_CM23/non_secure/port.c
+++ b/portable/IAR/ARM_CM23/non_secure/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
diff --git a/portable/IAR/ARM_CM23_NTZ/non_secure/port.c b/portable/IAR/ARM_CM23_NTZ/non_secure/port.c
index e0a0c7e..8c91b55 100644
--- a/portable/IAR/ARM_CM23_NTZ/non_secure/port.c
+++ b/portable/IAR/ARM_CM23_NTZ/non_secure/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
diff --git a/portable/IAR/ARM_CM3/port.c b/portable/IAR/ARM_CM3/port.c
index 5a37539..8a23760 100644
--- a/portable/IAR/ARM_CM3/port.c
+++ b/portable/IAR/ARM_CM3/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/IAR/ARM_CM33/non_secure/port.c b/portable/IAR/ARM_CM33/non_secure/port.c
index e0a0c7e..8c91b55 100644
--- a/portable/IAR/ARM_CM33/non_secure/port.c
+++ b/portable/IAR/ARM_CM33/non_secure/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
diff --git a/portable/IAR/ARM_CM33_NTZ/non_secure/port.c b/portable/IAR/ARM_CM33_NTZ/non_secure/port.c
index e0a0c7e..8c91b55 100644
--- a/portable/IAR/ARM_CM33_NTZ/non_secure/port.c
+++ b/portable/IAR/ARM_CM33_NTZ/non_secure/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
diff --git a/portable/IAR/ARM_CM4F/port.c b/portable/IAR/ARM_CM4F/port.c
index 3721fc8..22fe4cd 100644
--- a/portable/IAR/ARM_CM4F/port.c
+++ b/portable/IAR/ARM_CM4F/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/IAR/ARM_CM4F_MPU/port.c b/portable/IAR/ARM_CM4F_MPU/port.c
index 05112dd..7fb9036 100644
--- a/portable/IAR/ARM_CM4F_MPU/port.c
+++ b/portable/IAR/ARM_CM4F_MPU/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/IAR/ARM_CM4F_MPU/portmacro.h b/portable/IAR/ARM_CM4F_MPU/portmacro.h
index df776db..68da416 100644
--- a/portable/IAR/ARM_CM4F_MPU/portmacro.h
+++ b/portable/IAR/ARM_CM4F_MPU/portmacro.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
diff --git a/portable/IAR/ARM_CM7/r0p1/port.c b/portable/IAR/ARM_CM7/r0p1/port.c
index 98ee53d..b2f43da 100644
--- a/portable/IAR/ARM_CM7/r0p1/port.c
+++ b/portable/IAR/ARM_CM7/r0p1/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/IAR/AVR_AVRDx/port.c b/portable/IAR/AVR_AVRDx/port.c
index e723603..9f7554c 100644
--- a/portable/IAR/AVR_AVRDx/port.c
+++ b/portable/IAR/AVR_AVRDx/port.c
@@ -23,7 +23,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #include <stdlib.h>
@@ -118,6 +117,7 @@
      *  portSAVE_CONTEXT places the flags on the stack immediately after r0
      *  to ensure the interrupts get disabled as soon as possible, and so ensuring
      *  the stack use is minimal should a context switch interrupt occur. */
+
     *pxTopOfStack = ( StackType_t ) 0x00; /* R0 */
     pxTopOfStack--;
     *pxTopOfStack = portFLAGS_INT_ENABLED;
diff --git a/portable/IAR/AVR_AVRDx/portmacro.h b/portable/IAR/AVR_AVRDx/portmacro.h
index 1c383b9..1cb2568 100644
--- a/portable/IAR/AVR_AVRDx/portmacro.h
+++ b/portable/IAR/AVR_AVRDx/portmacro.h
@@ -23,7 +23,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef PORTMACRO_H
diff --git a/portable/IAR/AVR_AVRDx/portmacro.s90 b/portable/IAR/AVR_AVRDx/portmacro.s90
index 70a12ec..727bf8a 100644
--- a/portable/IAR/AVR_AVRDx/portmacro.s90
+++ b/portable/IAR/AVR_AVRDx/portmacro.s90
@@ -22,7 +22,6 @@
 ; * http://www.FreeRTOS.org
 ; * http://aws.amazon.com/freertos
 ; *
-; * 1 tab == 4 spaces!
 ; */
 
 #include "porthardware.h"
diff --git a/portable/IAR/AVR_Mega0/port.c b/portable/IAR/AVR_Mega0/port.c
index b2d3563..f6e8504 100644
--- a/portable/IAR/AVR_Mega0/port.c
+++ b/portable/IAR/AVR_Mega0/port.c
@@ -23,7 +23,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #include <stdlib.h>
@@ -118,6 +117,7 @@
      *  portSAVE_CONTEXT places the flags on the stack immediately after r0
      *  to ensure the interrupts get disabled as soon as possible, and so ensuring
      *  the stack use is minimal should a context switch interrupt occur. */
+
     *pxTopOfStack = ( StackType_t ) 0x00; /* R0 */
     pxTopOfStack--;
     *pxTopOfStack = portFLAGS_INT_ENABLED;
diff --git a/portable/IAR/AVR_Mega0/portmacro.h b/portable/IAR/AVR_Mega0/portmacro.h
index 1c383b9..1cb2568 100644
--- a/portable/IAR/AVR_Mega0/portmacro.h
+++ b/portable/IAR/AVR_Mega0/portmacro.h
@@ -23,7 +23,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef PORTMACRO_H
diff --git a/portable/MemMang/heap_4.c b/portable/MemMang/heap_4.c
index 2015f90..5a80317 100644
--- a/portable/MemMang/heap_4.c
+++ b/portable/MemMang/heap_4.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*
diff --git a/portable/MikroC/ARM_CM4F/port.c b/portable/MikroC/ARM_CM4F/port.c
index e61fc40..23cecc9 100644
--- a/portable/MikroC/ARM_CM4F/port.c
+++ b/portable/MikroC/ARM_CM4F/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/RVDS/ARM_CM0/port.c b/portable/RVDS/ARM_CM0/port.c
index d4e76ee..ed20ecc 100644
--- a/portable/RVDS/ARM_CM0/port.c
+++ b/portable/RVDS/ARM_CM0/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/RVDS/ARM_CM3/port.c b/portable/RVDS/ARM_CM3/port.c
index ead2869..97c26ef 100644
--- a/portable/RVDS/ARM_CM3/port.c
+++ b/portable/RVDS/ARM_CM3/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/RVDS/ARM_CM4F/port.c b/portable/RVDS/ARM_CM4F/port.c
index 9bf92e6..2d0b129 100644
--- a/portable/RVDS/ARM_CM4F/port.c
+++ b/portable/RVDS/ARM_CM4F/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/RVDS/ARM_CM4_MPU/port.c b/portable/RVDS/ARM_CM4_MPU/port.c
index 005881a..3076d6c 100644
--- a/portable/RVDS/ARM_CM4_MPU/port.c
+++ b/portable/RVDS/ARM_CM4_MPU/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/RVDS/ARM_CM4_MPU/portmacro.h b/portable/RVDS/ARM_CM4_MPU/portmacro.h
index 589e4eb..050e154 100644
--- a/portable/RVDS/ARM_CM4_MPU/portmacro.h
+++ b/portable/RVDS/ARM_CM4_MPU/portmacro.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 
diff --git a/portable/RVDS/ARM_CM7/r0p1/port.c b/portable/RVDS/ARM_CM7/r0p1/port.c
index 0519cac..3609d46 100644
--- a/portable/RVDS/ARM_CM7/r0p1/port.c
+++ b/portable/RVDS/ARM_CM7/r0p1/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/Tasking/ARM_CM4F/port.c b/portable/Tasking/ARM_CM4F/port.c
index bbdbbea..e8e3dc3 100644
--- a/portable/Tasking/ARM_CM4F/port.c
+++ b/portable/Tasking/ARM_CM4F/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*-----------------------------------------------------------
diff --git a/portable/ThirdParty/GCC/ARC_EM_HS/freertos_tls.c b/portable/ThirdParty/GCC/ARC_EM_HS/freertos_tls.c
index 28bf048..af8c826 100644
--- a/portable/ThirdParty/GCC/ARC_EM_HS/freertos_tls.c
+++ b/portable/ThirdParty/GCC/ARC_EM_HS/freertos_tls.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #if defined( __MW__ )
diff --git a/portable/ThirdParty/GCC/ARC_EM_HS/port.c b/portable/ThirdParty/GCC/ARC_EM_HS/port.c
index 360202a..a2605b0 100644
--- a/portable/ThirdParty/GCC/ARC_EM_HS/port.c
+++ b/portable/ThirdParty/GCC/ARC_EM_HS/port.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /*
diff --git a/portable/ThirdParty/GCC/ARC_EM_HS/portmacro.h b/portable/ThirdParty/GCC/ARC_EM_HS/portmacro.h
index 5cc3f46..d5b35a6 100644
--- a/portable/ThirdParty/GCC/ARC_EM_HS/portmacro.h
+++ b/portable/ThirdParty/GCC/ARC_EM_HS/portmacro.h
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #ifndef PORTMACRO_H
diff --git a/portable/ThirdParty/GCC/Xtensa_ESP32/include/portmacro.h b/portable/ThirdParty/GCC/Xtensa_ESP32/include/portmacro.h
index dc0c71c..9cb8af2 100644
--- a/portable/ThirdParty/GCC/Xtensa_ESP32/include/portmacro.h
+++ b/portable/ThirdParty/GCC/Xtensa_ESP32/include/portmacro.h
@@ -34,7 +34,6 @@
  *  FOR A PARTICULAR PURPOSE.  Full license text is available from the following
  *  link: http://www.freertos.org/a00114.html
  *
- *  1 tab == 4 spaces!
  *
  ***************************************************************************
  *                                                                       *
@@ -60,7 +59,6 @@
  *  engineered and independently SIL3 certified version for use in safety and
  *  mission critical applications that require provable dependability.
  *
- *  1 tab == 4 spaces!
  */
 
 #ifndef PORTMACRO_H
diff --git a/portable/ThirdParty/GCC/Xtensa_ESP32/port.c b/portable/ThirdParty/GCC/Xtensa_ESP32/port.c
index 70bccf1..822aad7 100644
--- a/portable/ThirdParty/GCC/Xtensa_ESP32/port.c
+++ b/portable/ThirdParty/GCC/Xtensa_ESP32/port.c
@@ -64,7 +64,6 @@
  *  engineered and independently SIL3 certified version for use in safety and
  *  mission critical applications that require provable dependability.
  *
- *  1 tab == 4 spaces!
  */
 
 /*******************************************************************************
diff --git a/queue.c b/queue.c
index dec1a07..27f76ae 100644
--- a/queue.c
+++ b/queue.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 #include <stdlib.h>
diff --git a/stream_buffer.c b/stream_buffer.c
index cb76d95..b22800e 100644
--- a/stream_buffer.c
+++ b/stream_buffer.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Standard includes. */
diff --git a/tasks.c b/tasks.c
index f69fd6b..939c117 100644
--- a/tasks.c
+++ b/tasks.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Standard includes. */
diff --git a/timers.c b/timers.c
index 923c7b1..b7bdb87 100644
--- a/timers.c
+++ b/timers.c
@@ -22,7 +22,6 @@
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
- * 1 tab == 4 spaces!
  */
 
 /* Standard includes. */