/*             ----> DO NOT REMOVE THE FOLLOWING NOTICE <----

                   Copyright (c) 2014-2015 Datalight, Inc.
                       All Rights Reserved Worldwide.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; use version 2 of the License.

    This program is distributed in the hope that it will be useful,
    but "AS-IS," WITHOUT ANY WARRANTY; without even the implied warranty
    of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc.,
    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
/*  Businesses and individuals that for commercial or other reasons cannot
    comply with the terms of the GPLv2 license may obtain a commercial license
    before incorporating Reliance Edge into proprietary software for
    distribution in any form.  Visit http://www.datalight.com/reliance-edge for
    more information.
*/
/** @file
    @brief Macros to encapsulate MISRA C:2012 deviations in OS-specific code.
*/
#ifndef REDOSDEVIATIONS_H
#define REDOSDEVIATIONS_H


#if REDCONF_OUTPUT == 1
/*  Needed for PRINT_ASSERT() and OUTPUT_CHARACTER().
*/
#include <stdio.h>
#endif


#if REDCONF_ASSERTS == 1
#if REDCONF_OUTPUT == 1
/** Print a formatted message for an assertion.

    Usages of this macro deviate from MISRA C:2012 Rule 21.6 (required).  Using
    printf() is the most convenient way to output this information; and the risk
    of "unspecified, undefined and implementation-defined" behavior causing
    problems (as cited in the rationale for the rule) is small.  The driver does
    not depend on this string being outputted correctly.  Furthermore, use of
    printf() disappears when either asserts or output are disabled.

    As Rule 21.6 is required, a separate deviation record is required.
*/
#define PRINT_ASSERT(file, line) \
    (void)printf("Assertion failed in \"%s\" at line %u\n\r", ((file) == NULL) ? "" : (file), (unsigned)(line))
#else
#define PRINT_ASSERT(file, line) do { (void)(file); (void)(line); } while(false)
#endif /* REDCONF_OUTPUT == 1 */
#endif /* REDCONF_ASSERTS == 1 */


/** Cast a value to unsigned long.

    Usages of this macro deviate from MISRA C:2012 Directive 4.6.  This macro is
    used in two places to cast a uint64_t value (used by the block device
    abstraction for sector numbers) to unsigned long, since third-party code
    which is not under the control of this project uses unsigned long for sector
    numbers.  The cast is guaranteed to not lose any information, since when the
    disk is opened the sector count is verified to be less than or equal to an
    unsigned long value.  The text of the directive mentions that "it might be
    desirable not to apply this guideline when interfacing with ... code outside
    the project's control", which describes the situation for this deviation.

    As Directive 4.6 is advisory, a deviation record is not required.  This
    notice is the only record of the deviation.
*/
#define CAST_ULONG(ull) ((unsigned long)(ull))


/** Cast a const-qualified pointer to a pointer which is *not* const-qualified.

    Usages of this macro deviate from MISRA C:2012 Rule 11.8.  This macro is
    used in exactly one place in order to cope with a poorly designed
    third-party interface.  Reliance Edge, at every level of the stack, uses
    const-qualified pointers for buffers used in write operations, since the
    data is read from the buffer, and the buffer does not need to be modified
    (consistent with Rule 8.13).  One of the third-party block device interfaces
    that Reliance Edge interfaces with does not follow this convention: it uses
    an unqualified pointer for the buffer parameter of its sector write
    function.  This forces the need for the cast to avoid warnings.  The
    implementation of the sector write function is provided by the user, so it
    is to be hoped that the buffer is not actually modified.

    As Rule 11.8 is required, a separate deviation record is required.
*/
#define CAST_AWAY_CONST(type, ptr) ((type *)(ptr))


/** Allocate zero-initialized (cleared) memory.

    All usages of this macro deviate from MISRA C:2012 Directive 4.12 (required)
    and Rule 21.3 (required).  In the context of the single place it is actually
    used, this macro also deviates from Rule 22.1 (required).

    This macro is used in the FreeRTOS block device code in order to allocate a
    RAM disk, when that implementation of the block device is selected.  The
    primary rationale for all these deviations is that a) the RAM disk cannot be
    allocated statically (since the volume information is stored in a
    structure), and b) the RAM disk is primarily intended as a temporary testing
    tool for users who want to try out Reliance Edge before the real storage
    media is available.  In most real systems, Reliance Edge is used with
    non-volatile storage like SD/MMC or eMMC, not with RAM disks.

    Rule 22.1 states that all resources which are allocated must also be
    explicitly freed.  The RAM disk is allocated and never freed, deviating from
    that rule.  This is done because the data in the RAM disk is emulating a
    non-volatile storage medium, and thus needs to persist even after the block
    device is closed, to allow the file system to be ormatted and then mounted,
    or unmounted and remounted in the course of a test.  Thus the memory will
    remain allocated until the target device is rebooted.  This is assumed to be
    acceptable for the primary purpose of the RAM disk, which is preliminary
    testing.

    As Directive 4.12, Rule 21.3, and Rule 22.1 are all required, separate
    deviation records are required.
*/
#define ALLOCATE_CLEARED_MEMORY(nelem, elsize) calloc(nelem, elsize)


#if REDCONF_OUTPUT == 1
/** Output a character to a serial port or other display device.

    Usages of this macro deviate from MISRA C:2012 Rule 21.6 (required).
    FreeRTOS does not include a standard method of printing characters, so
    putchar() is the most convenient and portable way to accomplish the task.
    The risk of "unspecified, undefined and implementation-defined" behavior
    causing problems (as cited in the rationale for the rule) is small.  The
    driver does not depend on the character being outputted correctly.
    Furthermore, use of putchar() disappears when output is disabled.

    As Rule 21.6 is required, a separate deviation record is required.
*/
#define OUTPUT_CHARACTER(ch) (void)putchar(ch)
#endif


#if (REDCONF_TASK_COUNT > 1U) && (REDCONF_API_POSIX == 1)
/** Cast a TaskHandle_t (a pointer type) to uintptr_t.

    Usage of this macro deivate from MISRA-C:2012 Rule 11.4 (advisory).  This
    macro is used for the FreeRTOS version of RedOsTaskId().  Some RTOSes
    natively use an integer for task IDs; others use pointers.  RedOsTaskId()
    uses integers, FreeRTOS uses pointers; to reconcile this difference, the
    pointer must be cast to integer.  This is fairly safe, since the resulting
    integer is never cast back to a pointer; and although the integer
    representation of a pointer is implementation-defined, the representation is
    irrelevant provided that unique pointers are converted to unique integers.

    As Rule 11.4 is advisory, a deviation record is not required.  This notice
    is the only record of the deviation.
*/
#define CAST_TASK_PTR_TO_UINTPTR(taskptr) ((uintptr_t)(taskptr))
#endif


#endif