/*
    FreeRTOS V8.2.2 - Copyright (C) 2015 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

    ***************************************************************************
    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<
    ***************************************************************************

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
    the FAQ page "My application does not run, what could be wrong?".  Have you
    defined configASSERT()?

    http://www.FreeRTOS.org/support - In return for receiving this top quality
    embedded software for free we request you assist our global community by
    participating in the support forum.

    http://www.FreeRTOS.org/training - Investing in training allows your team to
    be as productive as possible as early as possible.  Now you can receive
    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
    Ltd, and the world's leading authority on the world's leading RTOS.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

/*
 * Interrupt driven driver for the EMAC peripheral.  This driver is not
 * reentrant, re-entrancy is handled by a semaphore at the network interface
 * level. 
 */


/*
Changes from V3.2.2

	+ Corrected the byte order when writing the MAC address to the MAC.
	+ Support added for MII interfaces.  Previously only RMII was supported.

Changes from V3.2.3

	+ The MII interface is now the default.
	+ Modified the initialisation sequence slightly to allow auto init more
	  time to complete.

Changes from V4.0.1

	+ Made the function vClearEMACTxBuffer() more robust by moving the index
	  manipulation into the if() statement.  This allows the tx interrupt to
	  execute even when there is no data to handle.

Changes from V4.0.4

	+ Corrected the Rx frame length mask when obtaining the length from the
	  rx descriptor.
*/


/* Standard includes. */
#include <string.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "semphr.h"
#include "task.h"

/* Demo app includes. */
#include "SAM7_EMAC.h"

/* Hardware specific includes. */
#include "Emac.h"
#include "mii.h"
#include "AT91SAM7X256.h"


/* USE_RMII_INTERFACE must be defined as 1 to use an RMII interface, or 0
to use an MII interface. */
#define USE_RMII_INTERFACE 0


/* The buffer addresses written into the descriptors must be aligned so the
last few bits are zero.  These bits have special meaning for the EMAC
peripheral and cannot be used as part of the address. */
#define emacADDRESS_MASK			( ( unsigned long ) 0xFFFFFFFC )

/* Bit used within the address stored in the descriptor to mark the last
descriptor in the array. */
#define emacRX_WRAP_BIT				( ( unsigned long ) 0x02 )

/* Bit used within the Tx descriptor status to indicate whether the
descriptor is under the control of the EMAC or the software. */
#define emacTX_BUF_USED				( ( unsigned long ) 0x80000000 )

/* A short delay is used to wait for a buffer to become available, should
one not be immediately available when trying to transmit a frame. */
#define emacBUFFER_WAIT_DELAY		( 2 )
#define emacMAX_WAIT_CYCLES			( ( portBASE_TYPE ) ( configTICK_RATE_HZ / 40 ) )

/* The time to block waiting for input. */
#define emacBLOCK_TIME_WAITING_FOR_INPUT	( ( TickType_t ) 100 )

/* Peripheral setup for the EMAC. */
#define emacPERIPHERAL_A_SETUP 		( ( unsigned long ) AT91C_PB2_ETX0			) | \
									( ( unsigned long ) AT91C_PB12_ETXER		) | \
									( ( unsigned long ) AT91C_PB16_ECOL			) | \
									( ( unsigned long ) AT91C_PB11_ETX3			) | \
									( ( unsigned long ) AT91C_PB6_ERX1			) | \
									( ( unsigned long ) AT91C_PB15_ERXDV		) | \
									( ( unsigned long ) AT91C_PB13_ERX2			) | \
									( ( unsigned long ) AT91C_PB3_ETX1			) | \
									( ( unsigned long ) AT91C_PB8_EMDC			) | \
									( ( unsigned long ) AT91C_PB5_ERX0			) | \
									( ( unsigned long ) AT91C_PB14_ERX3			) | \
									( ( unsigned long ) AT91C_PB4_ECRS_ECRSDV	) | \
									( ( unsigned long ) AT91C_PB1_ETXEN			) | \
									( ( unsigned long ) AT91C_PB10_ETX2			) | \
									( ( unsigned long ) AT91C_PB0_ETXCK_EREFCK	) | \
									( ( unsigned long ) AT91C_PB9_EMDIO			) | \
									( ( unsigned long ) AT91C_PB7_ERXER			) | \
									( ( unsigned long ) AT91C_PB17_ERXCK		);

/* Misc defines. */
#define emacINTERRUPT_LEVEL			( 5 )
#define emacNO_DELAY				( 0 )
#define emacTOTAL_FRAME_HEADER_SIZE	( 54 )
#define emacPHY_INIT_DELAY			( 5000 / portTICK_PERIOD_MS )
#define emacRESET_KEY				( ( unsigned long ) 0xA5000000 )
#define emacRESET_LENGTH			( ( unsigned long ) ( 0x01 << 8 ) )

/* The Atmel header file only defines the TX frame length mask. */
#define emacRX_LENGTH_FRAME			( 0xfff )

/*-----------------------------------------------------------*/

/* Buffer written to by the EMAC DMA.  Must be aligned as described by the
comment above the emacADDRESS_MASK definition. */
static volatile char pcRxBuffer[ NB_RX_BUFFERS * ETH_RX_BUFFER_SIZE ] __attribute__ ((aligned (8)));

/* Buffer read by the EMAC DMA.  Must be aligned as described by the comment
above the emacADDRESS_MASK definition. */
static char pcTxBuffer[ NB_TX_BUFFERS * ETH_TX_BUFFER_SIZE ] __attribute__ ((aligned (8)));

/* Descriptors used to communicate between the program and the EMAC peripheral.
These descriptors hold the locations and state of the Rx and Tx buffers. */
static volatile AT91S_TxTdDescriptor xTxDescriptors[ NB_TX_BUFFERS ];
static volatile AT91S_RxTdDescriptor xRxDescriptors[ NB_RX_BUFFERS ];

/* The IP and Ethernet addresses are read from the header files. */
const char cMACAddress[ 6 ] = { emacETHADDR0, emacETHADDR1, emacETHADDR2, emacETHADDR3, emacETHADDR4, emacETHADDR5 };
const unsigned char ucIPAddress[ 4 ]  = { emacIPADDR0, emacIPADDR1, emacIPADDR2, emacIPADDR3 };

/*-----------------------------------------------------------*/

/* See the header file for descriptions of public functions. */

/*
 * Prototype for the EMAC interrupt function.
 */
void vEMACISR_Wrapper( void ) __attribute__ ((naked));

/*
 * Initialise both the Tx and Rx descriptors used by the EMAC.
 */
static void prvSetupDescriptors(void);

/*
 * Write our MAC address into the EMAC.  
 */
static void prvSetupMACAddress( void );

/*
 * Configure the EMAC and AIC for EMAC interrupts.
 */
static void prvSetupEMACInterrupt( void );

/*
 * Some initialisation functions taken from the Atmel EMAC sample code.
 */
static void vReadPHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long *pulValue );
static portBASE_TYPE xGetLinkSpeed( void );
static portBASE_TYPE prvProbePHY( void );
#if USE_RMII_INTERFACE != 1
	static void vWritePHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long ulValue);
#endif


/* The semaphore used by the EMAC ISR to wake the EMAC task. */
static SemaphoreHandle_t xSemaphore = NULL;

/* Holds the index to the next buffer from which data will be read. */
static volatile unsigned long ulNextRxBuffer = 0;

/*-----------------------------------------------------------*/

/* See the header file for descriptions of public functions. */
long lEMACSend( char *pcFrom, unsigned long ulLength, long lEndOfFrame )
{
static unsigned portBASE_TYPE uxTxBufferIndex = 0;
portBASE_TYPE xWaitCycles = 0;
long lReturn = pdPASS;
char *pcBuffer;
unsigned long ulLastBuffer, ulDataBuffered = 0, ulDataRemainingToSend, ulLengthToSend;

	/* If the length of data to be transmitted is greater than each individual
	transmit buffer then the data will be split into more than one buffer.
	Loop until the entire length has been buffered. */
	while( ulDataBuffered < ulLength )
	{
		/* Is a buffer available? */
		while( !( xTxDescriptors[ uxTxBufferIndex ].U_Status.status & AT91C_TRANSMIT_OK ) )
		{
			/* There is no room to write the Tx data to the Tx buffer.  Wait a
			short while, then try again. */
			xWaitCycles++;
			if( xWaitCycles > emacMAX_WAIT_CYCLES )
			{
				/* Give up. */
				lReturn = pdFAIL;
				break;
			}
			else
			{
				vTaskDelay( emacBUFFER_WAIT_DELAY );
			}
		}
	
		/* lReturn will only be pdPASS if a buffer is available. */
		if( lReturn == pdPASS )
		{
			portENTER_CRITICAL();
			{
				/* Get the address of the buffer from the descriptor, then copy 
				the data into the buffer. */
				pcBuffer = ( char * ) xTxDescriptors[ uxTxBufferIndex ].addr;

				/* How much can we write to the buffer? */
				ulDataRemainingToSend = ulLength - ulDataBuffered;
				if( ulDataRemainingToSend <= ETH_TX_BUFFER_SIZE )
				{
					/* We can write all the remaining bytes. */
					ulLengthToSend = ulDataRemainingToSend;
				}
				else
				{
					/* We can not write more than ETH_TX_BUFFER_SIZE in one go. */
					ulLengthToSend = ETH_TX_BUFFER_SIZE;
				}

				/* Copy the data into the buffer. */
				memcpy( ( void * ) pcBuffer, ( void * ) &( pcFrom[ ulDataBuffered ] ), ulLengthToSend );
				ulDataBuffered += ulLengthToSend;

				/* Is this the last data for the frame? */
				if( lEndOfFrame && ( ulDataBuffered >= ulLength ) )
				{
					/* No more data remains for this frame so we can start the 
					transmission. */
					ulLastBuffer = AT91C_LAST_BUFFER;
				}
				else
				{
					/* More data to come for this frame. */
					ulLastBuffer = 0;
				}
	
				/* Fill out the necessary in the descriptor to get the data sent, 
				then move to the next descriptor, wrapping if necessary. */
				if( uxTxBufferIndex >= ( NB_TX_BUFFERS - 1 ) )
				{				
					xTxDescriptors[ uxTxBufferIndex ].U_Status.status = 	( ulLengthToSend & ( unsigned long ) AT91C_LENGTH_FRAME )
																			| ulLastBuffer
																			| AT91C_TRANSMIT_WRAP;
					uxTxBufferIndex = 0;
				}
				else
				{
					xTxDescriptors[ uxTxBufferIndex ].U_Status.status = 	( ulLengthToSend & ( unsigned long ) AT91C_LENGTH_FRAME )
																			| ulLastBuffer;
					uxTxBufferIndex++;
				}
	
				/* If this is the last buffer to be sent for this frame we can
				start the transmission. */
				if( ulLastBuffer )
				{
					AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_TSTART;
				}
			}
			portEXIT_CRITICAL();
		}
		else
		{
			break;
		}
	}

	return lReturn;
}
/*-----------------------------------------------------------*/

/* See the header file for descriptions of public functions. */
unsigned long ulEMACInputLength( void )
{
register unsigned long ulIndex, ulLength = 0;

	/* Skip any fragments.  We are looking for the first buffer that contains
	data and has the SOF (start of frame) bit set. */
	while( ( xRxDescriptors[ ulNextRxBuffer ].addr & AT91C_OWNERSHIP_BIT ) && !( xRxDescriptors[ ulNextRxBuffer ].U_Status.status & AT91C_SOF ) )
	{
		/* Ignoring this buffer.  Mark it as free again. */
		xRxDescriptors[ ulNextRxBuffer ].addr &= ~( AT91C_OWNERSHIP_BIT );		
		ulNextRxBuffer++;
		if( ulNextRxBuffer >= NB_RX_BUFFERS )
		{
			ulNextRxBuffer = 0;
		}
	}

	/* We are going to walk through the descriptors that make up this frame, 
	but don't want to alter ulNextRxBuffer as this would prevent vEMACRead()
	from finding the data.  Therefore use a copy of ulNextRxBuffer instead. */
	ulIndex = ulNextRxBuffer;

	/* Walk through the descriptors until we find the last buffer for this 
	frame.  The last buffer will give us the length of the entire frame. */
	while( ( xRxDescriptors[ ulIndex ].addr & AT91C_OWNERSHIP_BIT ) && !ulLength )
	{
		ulLength = xRxDescriptors[ ulIndex ].U_Status.status & emacRX_LENGTH_FRAME;

		/* Increment to the next buffer, wrapping if necessary. */
		ulIndex++;
		if( ulIndex >= NB_RX_BUFFERS )
		{
			ulIndex = 0;
		}
	}

	return ulLength;
}
/*-----------------------------------------------------------*/

/* See the header file for descriptions of public functions. */
void vEMACRead( char *pcTo, unsigned long ulSectionLength, unsigned long ulTotalFrameLength )
{
static unsigned long ulSectionBytesReadSoFar = 0, ulBufferPosition = 0, ulFameBytesReadSoFar = 0;
static char *pcSource;
register unsigned long ulBytesRemainingInBuffer, ulRemainingSectionBytes;

	/* Read ulSectionLength bytes from the Rx buffers.  This is not necessarily any
	correspondence between the length of our Rx buffers, and the length of the
	data we are returning or the length of the data being requested.  Therefore, 
	between calls  we have to remember not only which buffer we are currently 
	processing, but our position within that buffer.  This would be greatly
	simplified if PBUF_POOL_BUFSIZE could be guaranteed to be greater than
	the size of each Rx buffer, and that memory fragmentation did not occur.
	
	This function should only be called after a call to ulEMACInputLength().
	This will ensure ulNextRxBuffer is set to the correct buffer. */



	/* vEMACRead is called with pcTo set to NULL to indicate that we are about
	to read a new frame.  Any fragments remaining in the frame we were 
	processing during the last call should be dropped. */
	if( pcTo == NULL )
	{
		/* How many bytes are indicated as being in this buffer?  If none then
		the buffer is completely full and the frame is contained within more
		than one buffer. */

		/* Reset our state variables ready for the next read from this buffer. */
        pcSource = ( char * )( xRxDescriptors[ ulNextRxBuffer ].addr & emacADDRESS_MASK );
        ulFameBytesReadSoFar = ( unsigned long ) 0;
		ulBufferPosition = ( unsigned long ) 0;
	}
	else
	{
		/* Loop until we have obtained the required amount of data. */
        ulSectionBytesReadSoFar = 0;
		while( ulSectionBytesReadSoFar < ulSectionLength )
		{
			/* We may have already read some data from this buffer.  How much
			data remains in the buffer? */
			ulBytesRemainingInBuffer = ( ETH_RX_BUFFER_SIZE - ulBufferPosition );

			/* How many more bytes do we need to read before we have the 
			required amount of data? */
            ulRemainingSectionBytes = ulSectionLength - ulSectionBytesReadSoFar;

			/* Do we want more data than remains in the buffer? */
			if( ulRemainingSectionBytes > ulBytesRemainingInBuffer )
			{
				/* We want more data than remains in the buffer so we can 
				write the remains of the buffer to the destination, then move
				onto the next buffer to get the rest. */
				memcpy( &( pcTo[ ulSectionBytesReadSoFar ] ), &( pcSource[ ulBufferPosition ] ), ulBytesRemainingInBuffer );
				ulSectionBytesReadSoFar += ulBytesRemainingInBuffer;
                ulFameBytesReadSoFar += ulBytesRemainingInBuffer;

				/* Mark the buffer as free again. */
				xRxDescriptors[ ulNextRxBuffer ].addr &= ~( AT91C_OWNERSHIP_BIT );

				/* Move onto the next buffer. */
				ulNextRxBuffer++;
				if( ulNextRxBuffer >= NB_RX_BUFFERS )
				{
					ulNextRxBuffer = ( unsigned long ) 0;
				}

				/* Reset the variables for the new buffer. */
				pcSource = ( char * )( xRxDescriptors[ ulNextRxBuffer ].addr & emacADDRESS_MASK );
				ulBufferPosition = ( unsigned long ) 0;
			}
			else
			{
				/* We have enough data in this buffer to send back.  Read out
				enough data and remember how far we read up to. */
				memcpy( &( pcTo[ ulSectionBytesReadSoFar ] ), &( pcSource[ ulBufferPosition ] ), ulRemainingSectionBytes );

				/* There may be more data in this buffer yet.  Increment our 
				position in this buffer past the data we have just read. */
				ulBufferPosition += ulRemainingSectionBytes;
				ulSectionBytesReadSoFar += ulRemainingSectionBytes;
                ulFameBytesReadSoFar += ulRemainingSectionBytes;

				/* Have we now finished with this buffer? */
				if( ( ulBufferPosition >= ETH_RX_BUFFER_SIZE ) || ( ulFameBytesReadSoFar >= ulTotalFrameLength ) )
				{
					/* Mark the buffer as free again. */
					xRxDescriptors[ ulNextRxBuffer ].addr &= ~( AT91C_OWNERSHIP_BIT );

					/* Move onto the next buffer. */
					ulNextRxBuffer++;
					if( ulNextRxBuffer >= NB_RX_BUFFERS )
					{
						ulNextRxBuffer = 0;
					}
	
					pcSource = ( char * )( xRxDescriptors[ ulNextRxBuffer ].addr & emacADDRESS_MASK );
					ulBufferPosition = 0;
				}
			}
		}
	}
}
/*-----------------------------------------------------------*/

/* See the header file for descriptions of public functions. */
SemaphoreHandle_t xEMACInit( void )
{
	/* Code supplied by Atmel -------------------------------*/

	/* Disable pull up on RXDV => PHY normal mode (not in test mode),
	PHY has internal pull down. */
	AT91C_BASE_PIOB->PIO_PPUDR = 1 << 15;

	#if USE_RMII_INTERFACE != 1
	  	/* PHY has internal pull down : set MII mode. */
	  	AT91C_BASE_PIOB->PIO_PPUDR = 1 << 16;
	#endif

	/* Clear PB18 <=> PHY powerdown. */
   	AT91C_BASE_PIOB->PIO_PER = 1 << 18;
	AT91C_BASE_PIOB->PIO_OER = 1 << 18;
	AT91C_BASE_PIOB->PIO_CODR = 1 << 18;

	/* After PHY power up, hardware reset. */
	AT91C_BASE_RSTC->RSTC_RMR = emacRESET_KEY | emacRESET_LENGTH;
	AT91C_BASE_RSTC->RSTC_RCR = emacRESET_KEY | AT91C_RSTC_EXTRST;

	/* Wait for hardware reset end. */
	while( !( AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL ) )
	{
		__asm volatile ( "NOP" );
	}
    __asm volatile ( "NOP" );

	/* Setup the pins. */
	AT91C_BASE_PIOB->PIO_ASR = emacPERIPHERAL_A_SETUP;
	AT91C_BASE_PIOB->PIO_PDR = emacPERIPHERAL_A_SETUP;

	/* Enable com between EMAC PHY.

	Enable management port. */
	AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_MPE;	

	/* MDC = MCK/32. */
	AT91C_BASE_EMAC->EMAC_NCFGR |= ( 2 ) << 10;	

	/* Wait for PHY auto init end (rather crude delay!). */
	vTaskDelay( emacPHY_INIT_DELAY );

	/* PHY configuration. */
	#if USE_RMII_INTERFACE != 1
	{
		unsigned long ulControl;

		/* PHY has internal pull down : disable MII isolate. */
		vReadPHY( AT91C_PHY_ADDR, MII_BMCR, &ulControl );
		vReadPHY( AT91C_PHY_ADDR, MII_BMCR, &ulControl );
		ulControl &= ~BMCR_ISOLATE;
		vWritePHY( AT91C_PHY_ADDR, MII_BMCR, ulControl );
	}
	#endif

	/* Disable management port again. */
	AT91C_BASE_EMAC->EMAC_NCR &= ~AT91C_EMAC_MPE;

	#if USE_RMII_INTERFACE != 1
		/* Enable EMAC in MII mode, enable clock ERXCK and ETXCK. */
		AT91C_BASE_EMAC->EMAC_USRIO = AT91C_EMAC_CLKEN ;
	#else
		/* Enable EMAC in RMII mode, enable RMII clock (50MHz from oscillator
		on ERFCK). */
		AT91C_BASE_EMAC->EMAC_USRIO = AT91C_EMAC_RMII | AT91C_EMAC_CLKEN ;
	#endif

	/* End of code supplied by Atmel ------------------------*/

	/* Setup the buffers and descriptors. */
	prvSetupDescriptors();
	
	/* Load our MAC address into the EMAC. */
	prvSetupMACAddress();

	/* Are we connected? */
	if( prvProbePHY() )
	{
		/* Enable the interrupt! */
		portENTER_CRITICAL();
		{
			prvSetupEMACInterrupt();
			vPassEMACSemaphore( xSemaphore );
		}
		portEXIT_CRITICAL();
	}

	return xSemaphore;
}
/*-----------------------------------------------------------*/

/* See the header file for descriptions of public functions. */
void vClearEMACTxBuffer( void )
{
static unsigned portBASE_TYPE uxNextBufferToClear = 0;

	/* Called on Tx interrupt events to reset the AT91C_TRANSMIT_OK bit in each 
	Tx buffer within the frame just transmitted.  This marks all the buffers
	as available again.

	The first buffer in the frame should have the bit set automatically. */
	if( xTxDescriptors[ uxNextBufferToClear ].U_Status.status & AT91C_TRANSMIT_OK )
	{
		/* Loop through the other buffers in the frame. */
		while( !( xTxDescriptors[ uxNextBufferToClear ].U_Status.status & AT91C_LAST_BUFFER ) )
		{
			uxNextBufferToClear++;

			if( uxNextBufferToClear >= NB_TX_BUFFERS )
			{
				uxNextBufferToClear = 0;
			}

			xTxDescriptors[ uxNextBufferToClear ].U_Status.status |= AT91C_TRANSMIT_OK;
		}

		/* Start with the next buffer the next time a Tx interrupt is called. */
		uxNextBufferToClear++;

		/* Do we need to wrap back to the first buffer? */
		if( uxNextBufferToClear >= NB_TX_BUFFERS )
		{
			uxNextBufferToClear = 0;
		}
	}
}
/*-----------------------------------------------------------*/

static void prvSetupDescriptors(void)
{
unsigned portBASE_TYPE xIndex;
unsigned long ulAddress;

	/* Initialise xRxDescriptors descriptor. */
	for( xIndex = 0; xIndex < NB_RX_BUFFERS; ++xIndex )
	{
		/* Calculate the address of the nth buffer within the array. */
		ulAddress = ( unsigned long )( pcRxBuffer + ( xIndex * ETH_RX_BUFFER_SIZE ) );

		/* Write the buffer address into the descriptor.  The DMA will place
		the data at this address when this descriptor is being used.  Mask off
		the bottom bits of the address as these have special meaning. */
		xRxDescriptors[ xIndex ].addr = ulAddress & emacADDRESS_MASK;
	}	

	/* The last buffer has the wrap bit set so the EMAC knows to wrap back
	to the first buffer. */
	xRxDescriptors[ NB_RX_BUFFERS - 1 ].addr |= emacRX_WRAP_BIT;

	/* Initialise xTxDescriptors. */
	for( xIndex = 0; xIndex < NB_TX_BUFFERS; ++xIndex )
	{
		/* Calculate the address of the nth buffer within the array. */
		ulAddress = ( unsigned long )( pcTxBuffer + ( xIndex * ETH_TX_BUFFER_SIZE ) );

		/* Write the buffer address into the descriptor.  The DMA will read
		data from here when the descriptor is being used. */
		xTxDescriptors[ xIndex ].addr = ulAddress & emacADDRESS_MASK;
		xTxDescriptors[ xIndex ].U_Status.status = AT91C_TRANSMIT_OK;
	}	

	/* The last buffer has the wrap bit set so the EMAC knows to wrap back
	to the first buffer. */
	xTxDescriptors[ NB_TX_BUFFERS - 1 ].U_Status.status = AT91C_TRANSMIT_WRAP | AT91C_TRANSMIT_OK;

	/* Tell the EMAC where to find the descriptors. */
	AT91C_BASE_EMAC->EMAC_RBQP = ( unsigned long ) xRxDescriptors;
	AT91C_BASE_EMAC->EMAC_TBQP = ( unsigned long ) xTxDescriptors;
	
	/* Clear all the bits in the receive status register. */
	AT91C_BASE_EMAC->EMAC_RSR = ( AT91C_EMAC_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA );

	/* Enable the copy of data into the buffers, ignore broadcasts, 
	and don't copy FCS. */
	AT91C_BASE_EMAC->EMAC_NCFGR |= ( AT91C_EMAC_CAF | AT91C_EMAC_NBC | AT91C_EMAC_DRFCS);

	/* Enable Rx and Tx, plus the stats register. */
	AT91C_BASE_EMAC->EMAC_NCR |= ( AT91C_EMAC_TE | AT91C_EMAC_RE | AT91C_EMAC_WESTAT );
}	
/*-----------------------------------------------------------*/

static void prvSetupMACAddress( void )
{
	/* Must be written SA1L then SA1H. */
	AT91C_BASE_EMAC->EMAC_SA1L =	( ( unsigned long ) cMACAddress[ 3 ] << 24 ) |
									( ( unsigned long ) cMACAddress[ 2 ] << 16 ) |
									( ( unsigned long ) cMACAddress[ 1 ] << 8  ) |
									cMACAddress[ 0 ];

	AT91C_BASE_EMAC->EMAC_SA1H =	( ( unsigned long ) cMACAddress[ 5 ] << 8 ) |
									cMACAddress[ 4 ];
}
/*-----------------------------------------------------------*/

static void prvSetupEMACInterrupt( void )
{
	/* Create the semaphore used to trigger the EMAC task. */
	vSemaphoreCreateBinary( xSemaphore );
	if( xSemaphore )
	{
		/* We start by 'taking' the semaphore so the ISR can 'give' it when the
		first interrupt occurs. */
		xSemaphoreTake( xSemaphore, emacNO_DELAY );
		portENTER_CRITICAL();
		{
			/* We want to interrupt on Rx and Tx events. */
			AT91C_BASE_EMAC->EMAC_IER = AT91C_EMAC_RCOMP | AT91C_EMAC_TCOMP;

			/* Enable the interrupts in the AIC. */
			AT91F_AIC_ConfigureIt( AT91C_ID_EMAC, emacINTERRUPT_LEVEL, AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, ( void (*)( void ) ) vEMACISR_Wrapper );
            AT91C_BASE_AIC->AIC_IECR = 0x1 << AT91C_ID_EMAC;
		}
		portEXIT_CRITICAL();
	}
}





/*
 * The following functions are initialisation functions taken from the Atmel
 * EMAC sample code.
 */


static portBASE_TYPE prvProbePHY( void )
{
unsigned long ulPHYId1, ulPHYId2, ulStatus;
portBASE_TYPE xReturn = pdPASS;
	
	/* Code supplied by Atmel (reformatted) -----------------*/

	/* Enable management port */
	AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_MPE;	
   	AT91C_BASE_EMAC->EMAC_NCFGR |= ( 2 ) << 10;

	/* Read the PHY ID. */
	vReadPHY( AT91C_PHY_ADDR, MII_PHYSID1, &ulPHYId1 );
	vReadPHY(AT91C_PHY_ADDR, MII_PHYSID2, &ulPHYId2 );

	/* AMD AM79C875:
			PHY_ID1 = 0x0022
			PHY_ID2 = 0x5541
			Bits 3:0 Revision Number Four bit manufacturer?s revision number.
				0001 stands for Rev. A, etc.
	*/
	if( ( ( ulPHYId1 << 16 ) | ( ulPHYId2 & 0xfff0 ) ) != MII_DM9161_ID )
	{
		/* Did not expect this ID. */
		xReturn = pdFAIL;
	}
	else
	{
		ulStatus = xGetLinkSpeed();

		if( ulStatus != pdPASS )
		{
			xReturn = pdFAIL;
		}
	}

	/* Disable management port */
	AT91C_BASE_EMAC->EMAC_NCR &= ~AT91C_EMAC_MPE;	

	/* End of code supplied by Atmel ------------------------*/

	return xReturn;
}
/*-----------------------------------------------------------*/

static void vReadPHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long *pulValue )
{
	/* Code supplied by Atmel (reformatted) ----------------------*/

	AT91C_BASE_EMAC->EMAC_MAN = 	(AT91C_EMAC_SOF & (0x01<<30))
									| (2 << 16) | (2 << 28)
									| ((ucPHYAddress & 0x1f) << 23)
									| (ucAddress << 18);

	/* Wait until IDLE bit in Network Status register is cleared. */
	while( !( AT91C_BASE_EMAC->EMAC_NSR & AT91C_EMAC_IDLE ) )
	{
		__asm( "NOP" );
	}

	*pulValue = ( AT91C_BASE_EMAC->EMAC_MAN & 0x0000ffff );	

	/* End of code supplied by Atmel ------------------------*/
}
/*-----------------------------------------------------------*/

#if USE_RMII_INTERFACE != 1
static void vWritePHY( unsigned char ucPHYAddress, unsigned char ucAddress, unsigned long ulValue )
{
	/* Code supplied by Atmel (reformatted) ----------------------*/

	AT91C_BASE_EMAC->EMAC_MAN = (( AT91C_EMAC_SOF & (0x01<<30))
								| (2 << 16) | (1 << 28)
								| ((ucPHYAddress & 0x1f) << 23)
								| (ucAddress << 18))
								| (ulValue & 0xffff);

	/* Wait until IDLE bit in Network Status register is cleared */
	while( !( AT91C_BASE_EMAC->EMAC_NSR & AT91C_EMAC_IDLE ) )
	{
		__asm( "NOP" );
	};

	/* End of code supplied by Atmel ------------------------*/
}
#endif
/*-----------------------------------------------------------*/

static portBASE_TYPE xGetLinkSpeed( void )
{
	unsigned long ulBMSR, ulBMCR, ulLPA, ulMACCfg, ulSpeed, ulDuplex;

	/* Code supplied by Atmel (reformatted) -----------------*/

	/* Link status is latched, so read twice to get current value */
	vReadPHY(AT91C_PHY_ADDR, MII_BMSR, &ulBMSR);
	vReadPHY(AT91C_PHY_ADDR, MII_BMSR, &ulBMSR);

	if( !( ulBMSR & BMSR_LSTATUS ) )
	{	
		/* No Link. */
		return pdFAIL;
	}

	vReadPHY(AT91C_PHY_ADDR, MII_BMCR, &ulBMCR);
	if (ulBMCR & BMCR_ANENABLE)
	{				
		/* AutoNegotiation is enabled. */
		if (!(ulBMSR & BMSR_ANEGCOMPLETE))
		{
			/* Auto-negotitation in progress. */
			return pdFAIL;				
		}		

		vReadPHY(AT91C_PHY_ADDR, MII_LPA, &ulLPA);
		if( ( ulLPA & LPA_100FULL ) || ( ulLPA & LPA_100HALF ) )
		{
			ulSpeed = SPEED_100;
		}
		else
		{
			ulSpeed = SPEED_10;
		}

		if( ( ulLPA & LPA_100FULL ) || ( ulLPA & LPA_10FULL ) )
		{
			ulDuplex = DUPLEX_FULL;
		}
		else
		{
			ulDuplex = DUPLEX_HALF;
		}
	}
	else
	{
		ulSpeed = ( ulBMCR & BMCR_SPEED100 ) ? SPEED_100 : SPEED_10;
		ulDuplex = ( ulBMCR & BMCR_FULLDPLX ) ? DUPLEX_FULL : DUPLEX_HALF;
	}

	/* Update the MAC */
	ulMACCfg = AT91C_BASE_EMAC->EMAC_NCFGR & ~( AT91C_EMAC_SPD | AT91C_EMAC_FD );
	if( ulSpeed == SPEED_100 )
	{
		if( ulDuplex == DUPLEX_FULL )
		{
			/* 100 Full Duplex */
			AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg | AT91C_EMAC_SPD | AT91C_EMAC_FD;
		}
		else
		{					
			/* 100 Half Duplex */
			AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg | AT91C_EMAC_SPD;
		}
	}
	else
	{
		if (ulDuplex == DUPLEX_FULL)
		{
			/* 10 Full Duplex */
			AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg | AT91C_EMAC_FD;
		}
		else
		{			/* 10 Half Duplex */
			AT91C_BASE_EMAC->EMAC_NCFGR = ulMACCfg;
		}
	}

	/* End of code supplied by Atmel ------------------------*/

	return pdPASS;
}
/*-----------------------------------------------------------*/

void vEMACWaitForInput( void )
{
	/* Just wait until we are signled from an ISR that data is available, or
	we simply time out. */
	xSemaphoreTake( xSemaphore, emacBLOCK_TIME_WAITING_FOR_INPUT );
}