diff --git a/.github/scripts/kernel_checker.py b/.github/scripts/kernel_checker.py
index 12ea8b6..6882798 100755
--- a/.github/scripts/kernel_checker.py
+++ b/.github/scripts/kernel_checker.py
@@ -60,7 +60,8 @@
     '.png',
     '.bat',
     '.sh',
-    '.txt'
+    '.txt',
+    '.cmake'
 ]
 
 KERNEL_ASM_EXTENSIONS = [
diff --git a/include/stack_macros.h b/include/stack_macros.h
index ed9e7c5..39a26f9 100644
--- a/include/stack_macros.h
+++ b/include/stack_macros.h
@@ -45,13 +45,21 @@
 
 /*-----------------------------------------------------------*/
 
+/*
+ * portSTACK_LIMIT_PADDING is a number of extra words to consider to be in
+ * use on the stack.
+ */
+#ifndef portSTACK_LIMIT_PADDING
+    #define portSTACK_LIMIT_PADDING 0
+#endif
+
 #if ( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
 
 /* Only the current stack state is to be checked. */
     #define taskCHECK_FOR_STACK_OVERFLOW()                                                            \
     {                                                                                                 \
         /* Is the currently saved stack pointer within the stack limit? */                            \
-        if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack )                                     \
+        if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack + portSTACK_LIMIT_PADDING)            \
         {                                                                                             \
             vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
         }                                                                                             \
@@ -67,7 +75,7 @@
     {                                                                                                 \
                                                                                                       \
         /* Is the currently saved stack pointer within the stack limit? */                            \
-        if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack )                                \
+        if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack - portSTACK_LIMIT_PADDING)       \
         {                                                                                             \
             vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
         }                                                                                             \
diff --git a/portable/ThirdParty/GCC/RP2040/.gitignore b/portable/ThirdParty/GCC/RP2040/.gitignore
new file mode 100644
index 0000000..35eb919
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/.gitignore
@@ -0,0 +1,2 @@
+**/cmake-*
+.idea
diff --git a/portable/ThirdParty/GCC/RP2040/CMakeLists.txt b/portable/ThirdParty/GCC/RP2040/CMakeLists.txt
new file mode 100644
index 0000000..2471cf4
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/CMakeLists.txt
@@ -0,0 +1,40 @@
+cmake_minimum_required(VERSION 3.13)
+
+if (NOT TARGET _FreeRTOS_kernel_inclusion_marker)
+    add_library(_FreeRTOS_kernel_inclusion_marker INTERFACE)
+
+    # Pull in PICO SDK (must be before project)
+    include(pico_sdk_import.cmake)
+    if (PICO_SDK_VERSION_STRING VERSION_LESS "1.2.0")
+        message(FATAL_ERROR "Require at least Raspberry Pi Pico SDK version 1.2.0")
+    endif()
+
+    if (NOT FREERTOS_KERNEL_PATH)
+        get_filename_component(FREERTOS_KERNEL_PATH ${CMAKE_CURRENT_LIST_DIR}/../../../.. REALPATH)
+    endif ()
+
+    message(DEBUG "FREERTOS_KERNEL_PATH is ${FREERTOS_KERNEL_PATH}")
+    project(FreeRTOS-Kernel C CXX)
+
+    set(CMAKE_C_STANDARD 11)
+    set(CMAKE_CXX_STANDARD 17)
+
+    pico_is_top_level_project(FREERTOS_KERNEL_TOP_LEVEL_PROJECT)
+
+    # The real work gets done in library.cmake which is called at the end of pico_sdk_init
+    list(APPEND PICO_SDK_POST_LIST_FILES ${CMAKE_CURRENT_LIST_DIR}/library.cmake)
+
+    # We need to inject the following header file into ALL SDK files (which we do via the config header)
+    list(APPEND PICO_CONFIG_HEADER_FILES ${CMAKE_CURRENT_LIST_DIR}/include/freertos_sdk_config.h)
+
+    if (FREERTOS_KERNEL_TOP_LEVEL_PROJECT)
+        message("FreeRTOS: initialize SDK since we're the top-level")
+        # Initialize the SDK
+        pico_sdk_init()
+    else()
+        set(PICO_SDK_POST_LIST_FILES ${PICO_SDK_POST_LIST_FILES} PARENT_SCOPE)
+        set(PICO_CONFIG_HEADER_FILES ${PICO_CONFIG_HEADER_FILES} PARENT_SCOPE)
+        set(FREERTOS_KERNEL_PATH ${FREERTOS_KERNEL_PATH} PARENT_SCOPE)
+    endif()
+endif()
+
diff --git a/portable/ThirdParty/GCC/RP2040/FreeRTOS_Kernel_import.cmake b/portable/ThirdParty/GCC/RP2040/FreeRTOS_Kernel_import.cmake
new file mode 100644
index 0000000..dc68ed0
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/FreeRTOS_Kernel_import.cmake
@@ -0,0 +1,62 @@
+# This is a copy of <FREERTOS_KERNEL_PATH>/portable/ThirdParty/GCC/RP2040/FREERTOS_KERNEL_import.cmake
+
+# This can be dropped into an external project to help locate the FreeRTOS kernel
+# It should be include()ed prior to project(). Alternatively this file may
+# or the CMakeLists.txt in this directory may be included or added via add_subdirectory
+# respectively.
+
+if (DEFINED ENV{FREERTOS_KERNEL_PATH} AND (NOT FREERTOS_KERNEL_PATH))
+    set(FREERTOS_KERNEL_PATH $ENV{FREERTOS_KERNEL_PATH})
+    message("Using FREERTOS_KERNEL_PATH from environment ('${FREERTOS_KERNEL_PATH}')")
+endif ()
+
+set(FREERTOS_KERNEL_RP2040_RELATIVE_PATH "portable/ThirdParty/GCC/RP2040")
+# undo the above
+set(FREERTOS_KERNEL_RP2040_BACK_PATH "../../../..")
+
+if (NOT FREERTOS_KERNEL_PATH)
+    # check if we are inside the FreeRTOS kernel tree (i.e. this file has been included directly)
+    get_filename_component(_ACTUAL_PATH ${CMAKE_CURRENT_LIST_DIR} REALPATH)
+    get_filename_component(_POSSIBLE_PATH ${CMAKE_CURRENT_LIST_DIR}/${FREERTOS_KERNEL_RP2040_BACK_PATH}/${FREERTOS_KERNEL_RP2040_RELATIVE_PATH} REALPATH)
+    if (_ACTUAL_PATH STREQUAL _POSSIBLE_PATH)
+        get_filename_component(FREERTOS_KERNEL_PATH ${CMAKE_CURRENT_LIST_DIR}/${FREERTOS_KERNEL_RP2040_BACK_PATH} REALPATH)
+    endif()
+    if (_ACTUAL_PATH STREQUAL _POSSIBLE_PATH)
+        get_filename_component(FREERTOS_KERNEL_PATH ${CMAKE_CURRENT_LIST_DIR}/${FREERTOS_KERNEL_RP2040_BACK_PATH} REALPATH)
+        message("Setting FREERTOS_KERNEL_PATH to ${FREERTOS_KERNEL_PATH} based on location of FreeRTOS-Kernel-import.cmake")
+    elseif (PICO_SDK_PATH AND EXISTS "${PICO_SDK_PATH}/../FreeRTOS-Kernel")
+        set(FREERTOS_KERNEL_PATH ${PICO_SDK_PATH}/../FreeRTOS-Kernel)
+        message("Defaulting FREERTOS_KERNEL_PATH as sibling of PICO_SDK_PATH: ${FREERTOS_KERNEL_PATH}")
+    endif()
+endif ()
+
+if (NOT FREERTOS_KERNEL_PATH)
+    foreach(POSSIBLE_SUFFIX Source FreeRTOS-Kernel FreeRTOS/Source)
+        # check if FreeRTOS-Kernel exists under directory that included us
+        set(SEARCH_ROOT ${CMAKE_CURRENT_SOURCE_DIR}})
+        set(SEARCH_ROOT ../../../..)
+        get_filename_component(_POSSIBLE_PATH ${SEARCH_ROOT}/${POSSIBLE_SUFFIX} REALPATH)
+        if (EXISTS ${_POSSIBLE_PATH}/${FREERTOS_KERNEL_RP2040_RELATIVE_PATH}/CMakeLists.txt)
+            get_filename_component(FREERTOS_KERNEL_PATH ${_POSSIBLE_PATH} REALPATH)
+            message("Setting FREERTOS_KERNEL_PATH to '${FREERTOS_KERNEL_PATH}' found relative to enclosing project")
+            break()
+        endif()
+    endforeach()
+endif()
+
+if (NOT FREERTOS_KERNEL_PATH)
+    message(FATAL_ERROR "FreeRTOS location was not specified. Please set FREERTOS_KERNEL_PATH.")
+endif()
+
+set(FREERTOS_KERNEL_PATH "${FREERTOS_KERNEL_PATH}" CACHE PATH "Path to the FreeRTOS Kernel")
+
+get_filename_component(FREERTOS_KERNEL_PATH "${FREERTOS_KERNEL_PATH}" REALPATH BASE_DIR "${CMAKE_BINARY_DIR}")
+if (NOT EXISTS ${FREERTOS_KERNEL_PATH})
+    message(FATAL_ERROR "Directory '${FREERTOS_KERNEL_PATH}' not found")
+endif()
+if (NOT EXISTS ${FREERTOS_KERNEL_PATH}/${FREERTOS_KERNEL_RP2040_RELATIVE_PATH}/CMakeLists.txt)
+    message(FATAL_ERROR "Directory '${FREERTOS_KERNEL_PATH}' does not contain an RP2040 port here: ${FREERTOS_KERNEL_RP2040_RELATIVE_PATH}")
+endif()
+set(FREERTOS_KERNEL_PATH ${FREERTOS_KERNEL_PATH} CACHE PATH "Path to the FreeRTOS_KERNEL" FORCE)
+
+add_subdirectory(${FREERTOS_KERNEL_PATH}/${FREERTOS_KERNEL_RP2040_RELATIVE_PATH} FREERTOS_KERNEL)
\ No newline at end of file
diff --git a/portable/ThirdParty/GCC/RP2040/LICENSE.md b/portable/ThirdParty/GCC/RP2040/LICENSE.md
new file mode 100644
index 0000000..62cf255
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/LICENSE.md
@@ -0,0 +1,23 @@
+BSD-3-Clause License
+
+Copyright (c) 2020-2021 Raspberry Pi (Trading) Ltd.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
+following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
+   disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
+   disclaimer in the documentation and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products
+   derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/portable/ThirdParty/GCC/RP2040/README.md b/portable/ThirdParty/GCC/RP2040/README.md
new file mode 100644
index 0000000..e3cbdb1
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/README.md
@@ -0,0 +1,30 @@
+## Overview
+
+This directory provides a FreeRTOS-Kernel port that can be used with the Raspberry Pi Pico SDK. It supports:
+
+ * Simple CMake INTERFACE libraries, to provide the FreeRTOS-Kernel and also the individual allocator types, without copying code into the user's project.
+ * Running the FreeRTOS-Kernel and tasks on either core 0 or core 1
+ * Use of SDK synchronization primitives (such as mutexes, semaphores, queues from pico_sync) between FreeRTOS tasks and code executing on the other core, or in IRQ handlers.
+
+Note that a FreeRTOS SMP version of this port is also available in the FreeRTOS-Kernel smp branch, which additionally supports utilizing both RP2040 CPU cores for FreeRTOS tasks simultaneously.
+
+## Using this port
+
+Copy [FreeRTOS-Kernel-import.cmake](FreeRTOS-Kernel-import.cmake) into your project, and
+add:
+
+```cmake
+import(FreeRTOS_Kernel_import.cmake)
+```
+
+below the usual import of `pico_sdk_import.cmake`
+
+This will find the FreeRTOS kernel if it is a direct sub-module of your project, or if you provide the `FREERTOS_KERNEL_PATH` variable in your environment or via `-DFREERTOS_KERNEL_PATH=/path/to/FreeRTOS-Kernel` on the CMake command line.
+
+## Advanced Configuration
+
+Some additional `config` options are defined [here](include/rp2040_config.h) which control some low level implementation details.
+
+## Known Limitations
+
+- Tickless idle has not currently been tested, and is likely non-functional
\ No newline at end of file
diff --git a/portable/ThirdParty/GCC/RP2040/idle_task_static_memory.c b/portable/ThirdParty/GCC/RP2040/idle_task_static_memory.c
new file mode 100644
index 0000000..4d4b0ea
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/idle_task_static_memory.c
@@ -0,0 +1,52 @@
+/*
+ * FreeRTOS Kernel <DEVELOPMENT BRANCH>
+ * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ * Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: MIT AND BSD-3-Clause
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * https://www.FreeRTOS.org
+ * https://github.com/FreeRTOS
+ */
+
+#include "FreeRTOS.h"
+
+void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer,
+                                    StackType_t **ppxIdleTaskStackBuffer,
+                                    uint32_t *pulIdleTaskStackSize )
+{
+    /* If the buffers to be provided to the Idle task are declared inside this
+    function then they must be declared static - otherwise they will be allocated on
+    the stack and so not exists after this function exits. */
+    static StaticTask_t xIdleTaskTCB;
+    static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
+
+    /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
+    state will be stored. */
+    *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
+
+    /* Pass out the array that will be used as the Idle task's stack. */
+    *ppxIdleTaskStackBuffer = uxIdleTaskStack;
+
+    /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
+    *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
+}
diff --git a/portable/ThirdParty/GCC/RP2040/include/freertos_sdk_config.h b/portable/ThirdParty/GCC/RP2040/include/freertos_sdk_config.h
new file mode 100644
index 0000000..1a67d28
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/include/freertos_sdk_config.h
@@ -0,0 +1,70 @@
+/*
+ * FreeRTOS Kernel V10.4.3
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ * Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * https://www.FreeRTOS.org
+ * https://github.com/FreeRTOS
+ */
+
+#ifndef FREERTOS_SDK_CONFIG_H
+#define FREERTOS_SDK_CONFIG_H
+
+#ifndef __ASSEMBLER__
+    #include "FreeRTOSConfig.h"
+    #include "rp2040_config.h"
+
+    #if ( configSUPPORT_PICO_SYNC_INTEROP == 1 )
+        // increase the amount of time it may reasonably take to wake us up
+        #ifndef PICO_TIME_SLEEP_OVERHEAD_ADJUST_US
+        #define PICO_TIME_SLEEP_OVERHEAD_ADJUST_US 150
+        #endif
+
+        #define lock_owner_id_t uint32_t
+        extern uint32_t ulPortLockGetCurrentOwnerId(void);
+        #define lock_get_caller_owner_id() ulPortLockGetCurrentOwnerId()
+        #define LOCK_INVALID_OWNER_ID ((uint32_t)-1)
+
+        struct lock_core;
+        #ifndef lock_internal_spin_unlock_with_wait
+        extern void vPortLockInternalSpinUnlockWithWait( struct lock_core *pxLock, uint32_t ulSave);
+        #define lock_internal_spin_unlock_with_wait(lock, save) vPortLockInternalSpinUnlockWithWait(lock, save)
+        #endif
+
+        #ifndef lock_internal_spin_unlock_with_notify
+        extern void vPortLockInternalSpinUnlockWithNotify( struct lock_core *pxLock, uint32_t save);
+        #define lock_internal_spin_unlock_with_notify(lock, save) vPortLockInternalSpinUnlockWithNotify(lock, save);
+        #endif
+
+        #ifndef lock_internal_spin_unlock_with_best_effort_wait_or_timeout
+        extern bool xPortLockInternalSpinUnlockWithBestEffortWaitOrTimeout( struct lock_core *pxLock, uint32_t ulSave, absolute_time_t uxUntil);
+        #define lock_internal_spin_unlock_with_best_effort_wait_or_timeout(lock, save, until) \
+            xPortLockInternalSpinUnlockWithBestEffortWaitOrTimeout(lock, save, until)
+        #endif
+    #endif /* configSUPPORT_PICO_SYNC_INTEROP */
+
+    #if ( configSUPPORT_PICO_TIME_INTEROP == 1 )
+        extern void xPortSyncInternalYieldUntilBefore(absolute_time_t t);
+        #define sync_internal_yield_until_before(t) xPortSyncInternalYieldUntilBefore(t)
+    #endif /* configSUPPORT_PICO_TIME_INTEROP */
+#endif /* __ASSEMBLER__ */
+#endif
\ No newline at end of file
diff --git a/portable/ThirdParty/GCC/RP2040/include/portmacro.h b/portable/ThirdParty/GCC/RP2040/include/portmacro.h
new file mode 100644
index 0000000..ffc93a6
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/include/portmacro.h
@@ -0,0 +1,151 @@
+/*
+ * FreeRTOS Kernel V10.4.3
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ * Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: MIT AND BSD-3-Clause
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * https://www.FreeRTOS.org
+ * https://github.com/FreeRTOS
+ *
+ */
+
+#ifndef PORTMACRO_H
+    #define PORTMACRO_H
+
+    #ifdef __cplusplus
+        extern "C" {
+    #endif
+
+    #include "pico.h"
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+    #define portCHAR          char
+    #define portFLOAT         float
+    #define portDOUBLE        double
+    #define portLONG          long
+    #define portSHORT         short
+    #define portSTACK_TYPE    uint32_t
+    #define portBASE_TYPE     long
+
+    typedef portSTACK_TYPE    StackType_t;
+    typedef int32_t           BaseType_t;
+    typedef uint32_t          UBaseType_t;
+
+    #if ( configUSE_16_BIT_TICKS == 1 )
+        typedef uint16_t     TickType_t;
+        #define portMAX_DELAY              ( TickType_t ) 0xffff
+    #else
+        typedef uint32_t     TickType_t;
+        #define portMAX_DELAY              ( TickType_t ) 0xffffffffUL
+
+/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+ * not need to be guarded with a critical section. */
+        #define portTICK_TYPE_IS_ATOMIC    1
+    #endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+    #define portSTACK_GROWTH      ( -1 )
+    #define portTICK_PERIOD_MS    ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+    #define portBYTE_ALIGNMENT    8
+    #define portDONT_DISCARD      __attribute__( ( used ) )
+    /* We have to use PICO_DIVIDER_DISABLE_INTERRUPTS as the source of truth rathern than our config,
+     * as our FreeRTOSConfig.h header cannot be included by ASM code - which is what this affects in the SDK */
+    #define portUSE_DIVIDER_SAVE_RESTORE !PICO_DIVIDER_DISABLE_INTERRUPTS
+    #if portUSE_DIVIDER_SAVE_RESTORE
+    #define portSTACK_LIMIT_PADDING 4
+    #endif
+
+/*-----------------------------------------------------------*/
+
+
+/* Scheduler utilities. */
+    extern void vPortYield( void );
+    #define portNVIC_INT_CTRL_REG     ( *( ( volatile uint32_t * ) 0xe000ed04 ) )
+    #define portNVIC_PENDSVSET_BIT    ( 1UL << 28UL )
+    #define portYIELD()                                 vPortYield()
+    #define portEND_SWITCHING_ISR( xSwitchRequired )    if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
+    #define portYIELD_FROM_ISR( x )                     portEND_SWITCHING_ISR( x )
+
+/*-----------------------------------------------------------*/
+
+/* Exception handlers */
+    #if (configUSE_DYNAMIC_EXCEPTION_HANDLERS == 0)
+        /* We only need to override the SDK's weak functions if we want to replace them at compile time */
+        #define vPortSVCHandler isr_svcall
+        #define xPortPendSVHandler isr_pendsv
+        #define xPortSysTickHandler isr_systick
+    #endif
+
+    #define portCHECK_IF_IN_ISR() ({ \
+        uint32_t ulIPSR;                                                  \
+       __asm volatile ("mrs %0, IPSR" : "=r" (ulIPSR)::);             \
+       ((uint8_t)ulIPSR)>0;})
+
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+    extern uint32_t ulSetInterruptMaskFromISR( void ) __attribute__( ( naked ) );
+    extern void vClearInterruptMaskFromISR( uint32_t ulMask )  __attribute__( ( naked ) );
+    #define portSET_INTERRUPT_MASK_FROM_ISR()         ulSetInterruptMaskFromISR()
+    #define portCLEAR_INTERRUPT_MASK_FROM_ISR( x )    vClearInterruptMaskFromISR( x )
+
+    #define portDISABLE_INTERRUPTS()                  __asm volatile ( " cpsid i " ::: "memory" )
+
+    extern void vPortEnableInterrupts();
+    #define portENABLE_INTERRUPTS()                   vPortEnableInterrupts()
+
+    extern void vPortEnterCritical( void );
+    extern void vPortExitCritical( void );
+    #define portENTER_CRITICAL()                      vPortEnterCritical()
+    #define portEXIT_CRITICAL()                       vPortExitCritical()
+
+/*-----------------------------------------------------------*/
+
+/* Tickless idle/low power functionality. */
+    #ifndef portSUPPRESS_TICKS_AND_SLEEP
+        extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+        #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime )    vPortSuppressTicksAndSleep( xExpectedIdleTime )
+    #endif
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site. */
+    #define portTASK_FUNCTION_PROTO( vFunction, pvParameters )    void vFunction( void * pvParameters )
+    #define portTASK_FUNCTION( vFunction, pvParameters )          void vFunction( void * pvParameters )
+
+    #define portNOP()
+
+    #define portMEMORY_BARRIER()    __asm volatile ( "" ::: "memory" )
+
+    #ifdef __cplusplus
+        }
+    #endif
+
+#endif /* PORTMACRO_H */
diff --git a/portable/ThirdParty/GCC/RP2040/include/rp2040_config.h b/portable/ThirdParty/GCC/RP2040/include/rp2040_config.h
new file mode 100644
index 0000000..eb73123
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/include/rp2040_config.h
@@ -0,0 +1,70 @@
+/*
+ * FreeRTOS Kernel V10.4.3
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ * Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: MIT AND BSD-3-Clause
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * https://www.FreeRTOS.org
+ * https://github.com/FreeRTOS
+ */
+
+#ifndef RP2040_CONFIG_H
+#define RP2040_CONFIG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* configUSE_DYNAMIC_EXCEPTION_HANDLERS == 1 means set the exception handlers dynamically on cores
+ * that need them in case the user has set up distinct vector table offsets per core
+ */
+#ifndef configUSE_DYNAMIC_EXCEPTION_HANDLERS
+    #if defined( PICO_NO_RAM_VECTOR_TABLE ) && ( PICO_NO_RAM_VECTOR_TABLE == 1 )
+        #define configUSE_DYNAMIC_EXCEPTION_HANDLERS 0
+    #else
+        #define configUSE_DYNAMIC_EXCEPTION_HANDLERS 1
+    #endif
+#endif
+
+/* configSUPPORT_PICO_SYNC_INTEROP == 1 means that SDK pico_sync
+ * sem/mutex/queue etc. will work correctly when called from FreeRTOS tasks
+ */
+#ifndef configSUPPORT_PICO_SYNC_INTEROP
+    #if LIB_PICO_SYNC
+        #define configSUPPORT_PICO_SYNC_INTEROP 1
+    #endif
+#endif
+
+/* configSUPPORT_PICO_SYNC_INTEROP == 1 means that SDK pico_time
+ * sleep_ms/sleep_us/sleep_until will work correctly when called from FreeRTOS
+ * tasks, and will actually block at the FreeRTOS level
+ */
+#ifndef configSUPPORT_PICO_TIME_INTEROP
+    #if LIB_PICO_TIME
+        #define configSUPPORT_PICO_TIME_INTEROP 1
+    #endif
+#endif
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif
diff --git a/portable/ThirdParty/GCC/RP2040/library.cmake b/portable/ThirdParty/GCC/RP2040/library.cmake
new file mode 100644
index 0000000..3c6d12d
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/library.cmake
@@ -0,0 +1,63 @@
+# Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+
+# Called after the Raspberry Pi Pico SDK has been initialized to add our libraries
+
+add_library(FreeRTOS-Kernel-Core INTERFACE)
+target_sources(FreeRTOS-Kernel-Core INTERFACE
+        ${FREERTOS_KERNEL_PATH}/croutine.c
+        ${FREERTOS_KERNEL_PATH}/event_groups.c
+        ${FREERTOS_KERNEL_PATH}/list.c
+        ${FREERTOS_KERNEL_PATH}/queue.c
+        ${FREERTOS_KERNEL_PATH}/stream_buffer.c
+        ${FREERTOS_KERNEL_PATH}/tasks.c
+        ${FREERTOS_KERNEL_PATH}/timers.c
+        )
+target_include_directories(FreeRTOS-Kernel-Core INTERFACE ${FREERTOS_KERNEL_PATH}/include)
+
+add_library(FreeRTOS-Kernel INTERFACE)
+target_sources(FreeRTOS-Kernel INTERFACE
+        ${CMAKE_CURRENT_LIST_DIR}/port.c
+)
+
+target_include_directories(FreeRTOS-Kernel INTERFACE
+        ${CMAKE_CURRENT_LIST_DIR}/include)
+
+target_link_libraries(FreeRTOS-Kernel INTERFACE
+        FreeRTOS-Kernel-Core
+        pico_base_headers
+        hardware_exception)
+
+target_compile_definitions(FreeRTOS-Kernel INTERFACE
+        LIB_FREERTOS_KERNEL=1
+        FREERTOS_KERNEL_SMP=0
+)
+
+add_library(FreeRTOS-Kernel-Static INTERFACE)
+target_compile_definitions(FreeRTOS-Kernel-Static INTERFACE
+        configSUPPORT_STATIC_ALLOCATION=1
+        )
+
+target_sources(FreeRTOS-Kernel-Static INTERFACE ${CMAKE_CURRENT_LIST_DIR}/idle_task_static_memory.c)
+target_link_libraries(FreeRTOS-Kernel-Static INTERFACE FreeRTOS-Kernel)
+
+add_library(FreeRTOS-Kernel-Heap1 INTERFACE)
+target_sources(FreeRTOS-Kernel-Heap1 INTERFACE ${FREERTOS_KERNEL_PATH}/portable/MemMang/heap_1.c)
+target_link_libraries(FreeRTOS-Kernel-Heap1 INTERFACE FreeRTOS-Kernel)
+
+add_library(FreeRTOS-Kernel-Heap2 INTERFACE)
+target_sources(FreeRTOS-Kernel-Heap2 INTERFACE ${FREERTOS_KERNEL_PATH}/portable/MemMang/heap_2.c)
+target_link_libraries(FreeRTOS-Kernel-Heap2 INTERFACE FreeRTOS-Kernel)
+
+add_library(FreeRTOS-Kernel-Heap3 INTERFACE)
+target_sources(FreeRTOS-Kernel-Heap3 INTERFACE ${FREERTOS_KERNEL_PATH}/portable/MemMang/heap_3.c)
+target_link_libraries(FreeRTOS-Kernel-Heap3 INTERFACE FreeRTOS-Kernel)
+
+add_library(FreeRTOS-Kernel-Heap4 INTERFACE)
+target_sources(FreeRTOS-Kernel-Heap4 INTERFACE ${FREERTOS_KERNEL_PATH}/portable/MemMang/heap_4.c)
+target_link_libraries(FreeRTOS-Kernel-Heap4 INTERFACE FreeRTOS-Kernel)
+
+add_library(FreeRTOS-Kernel-Heap5 INTERFACE)
+target_sources(FreeRTOS-Kernel-Heap5 INTERFACE ${FREERTOS_KERNEL_PATH}/portable/MemMang/heap_5.c)
+target_link_libraries(FreeRTOS-Kernel-Heap5 INTERFACE FreeRTOS-Kernel)
diff --git a/portable/ThirdParty/GCC/RP2040/pico_sdk_import.cmake b/portable/ThirdParty/GCC/RP2040/pico_sdk_import.cmake
new file mode 100644
index 0000000..e6c7a66
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/pico_sdk_import.cmake
@@ -0,0 +1,66 @@
+# Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+
+# This is a copy of <PICO_SDK_PATH>/external/pico_sdk_import.cmake
+
+# This can be dropped into an external project to help locate this SDK
+# It should be include()ed prior to project()
+
+if (DEFINED ENV{PICO_SDK_PATH} AND (NOT PICO_SDK_PATH))
+    set(PICO_SDK_PATH $ENV{PICO_SDK_PATH})
+    message("Using PICO_SDK_PATH from environment ('${PICO_SDK_PATH}')")
+endif ()
+
+if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT} AND (NOT PICO_SDK_FETCH_FROM_GIT))
+    set(PICO_SDK_FETCH_FROM_GIT $ENV{PICO_SDK_FETCH_FROM_GIT})
+    message("Using PICO_SDK_FETCH_FROM_GIT from environment ('${PICO_SDK_FETCH_FROM_GIT}')")
+endif ()
+
+if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT_PATH} AND (NOT PICO_SDK_FETCH_FROM_GIT_PATH))
+    set(PICO_SDK_FETCH_FROM_GIT_PATH $ENV{PICO_SDK_FETCH_FROM_GIT_PATH})
+    message("Using PICO_SDK_FETCH_FROM_GIT_PATH from environment ('${PICO_SDK_FETCH_FROM_GIT_PATH}')")
+endif ()
+
+set(PICO_SDK_PATH "${PICO_SDK_PATH}" CACHE PATH "Path to the Raspberry Pi Pico SDK")
+set(PICO_SDK_FETCH_FROM_GIT "${PICO_SDK_FETCH_FROM_GIT}" CACHE BOOL "Set to ON to fetch copy of SDK from git if not otherwise locatable")
+set(PICO_SDK_FETCH_FROM_GIT_PATH "${PICO_SDK_FETCH_FROM_GIT_PATH}" CACHE FILEPATH "location to download SDK")
+
+if (NOT PICO_SDK_PATH)
+    if (PICO_SDK_FETCH_FROM_GIT)
+        include(FetchContent)
+        set(FETCHCONTENT_BASE_DIR_SAVE ${FETCHCONTENT_BASE_DIR})
+        if (PICO_SDK_FETCH_FROM_GIT_PATH)
+            get_filename_component(FETCHCONTENT_BASE_DIR "${PICO_SDK_FETCH_FROM_GIT_PATH}" REALPATH BASE_DIR "${CMAKE_SOURCE_DIR}")
+        endif ()
+        FetchContent_Declare(
+                pico_sdk
+                GIT_REPOSITORY https://github.com/raspberrypi/pico-sdk
+                GIT_TAG master
+        )
+        if (NOT pico_sdk)
+            message("Downloading Raspberry Pi Pico SDK")
+            FetchContent_Populate(pico_sdk)
+            set(PICO_SDK_PATH ${pico_sdk_SOURCE_DIR})
+        endif ()
+        set(FETCHCONTENT_BASE_DIR ${FETCHCONTENT_BASE_DIR_SAVE})
+    else ()
+        message(FATAL_ERROR
+                "SDK location was not specified. Please set PICO_SDK_PATH or set PICO_SDK_FETCH_FROM_GIT to on to fetch from git."
+                )
+    endif ()
+endif ()
+
+get_filename_component(PICO_SDK_PATH "${PICO_SDK_PATH}" REALPATH BASE_DIR "${CMAKE_BINARY_DIR}")
+if (NOT EXISTS ${PICO_SDK_PATH})
+    message(FATAL_ERROR "Directory '${PICO_SDK_PATH}' not found")
+endif ()
+
+set(PICO_SDK_INIT_CMAKE_FILE ${PICO_SDK_PATH}/pico_sdk_init.cmake)
+if (NOT EXISTS ${PICO_SDK_INIT_CMAKE_FILE})
+    message(FATAL_ERROR "Directory '${PICO_SDK_PATH}' does not appear to contain the Raspberry Pi Pico SDK")
+endif ()
+
+set(PICO_SDK_PATH ${PICO_SDK_PATH} CACHE PATH "Path to the Raspberry Pi Pico SDK" FORCE)
+
+include(${PICO_SDK_INIT_CMAKE_FILE})
diff --git a/portable/ThirdParty/GCC/RP2040/port.c b/portable/ThirdParty/GCC/RP2040/port.c
new file mode 100644
index 0000000..6b54adc
--- /dev/null
+++ b/portable/ThirdParty/GCC/RP2040/port.c
@@ -0,0 +1,876 @@
+/*
+ * FreeRTOS Kernel V10.4.3
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ * Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: MIT AND BSD-3-Clause
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * https://www.FreeRTOS.org
+ * https://github.com/FreeRTOS
+ *
+ */
+
+/*----------------------------------------------------------------------
+* Implementation of functions defined in portable.h for the RP2040 port.
+*----------------------------------------------------------------------*/
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "rp2040_config.h"
+#include "hardware/clocks.h"
+#include "hardware/exception.h"
+
+/*
+ * LIB_PICO_MULTICORE == 1, if we are linked with pico_multicore (note that
+ * the non SMP FreeRTOS_Kernel is not linked with pico_multicore itself). We
+ * use this flag to determine if we need multi-core functionality.
+ */
+#if ( LIB_PICO_MULTICORE == 1)
+    #include "pico/multicore.h"
+#endif /* LIB_PICO_MULTICORE */
+
+/* Constants required to manipulate the NVIC. */
+#define portNVIC_SYSTICK_CTRL_REG             ( *( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG             ( *( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG    ( *( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_INT_CTRL_REG                 ( *( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_SHPR3_REG                    ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
+#define portNVIC_SYSTICK_CLK_BIT              ( 1UL << 2UL )
+#define portNVIC_SYSTICK_INT_BIT              ( 1UL << 1UL )
+#define portNVIC_SYSTICK_ENABLE_BIT           ( 1UL << 0UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT       ( 1UL << 16UL )
+#define portNVIC_PENDSVSET_BIT                ( 1UL << 28UL )
+#define portMIN_INTERRUPT_PRIORITY            ( 255UL )
+#define portNVIC_PENDSV_PRI                   ( portMIN_INTERRUPT_PRIORITY << 16UL )
+#define portNVIC_SYSTICK_PRI                  ( portMIN_INTERRUPT_PRIORITY << 24UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR                      ( 0x01000000 )
+
+/* The systick is a 24-bit counter. */
+#define portMAX_24_BIT_NUMBER                 ( 0xffffffUL )
+
+/* A fiddle factor to estimate the number of SysTick counts that would have
+ * occurred while the SysTick counter is stopped during tickless idle
+ * calculations. */
+#ifndef portMISSED_COUNTS_FACTOR
+    #define portMISSED_COUNTS_FACTOR    ( 45UL )
+#endif
+
+/* Let the user override the pre-loading of the initial LR with the address of
+ * prvTaskExitError() in case it messes up unwinding of the stack in the
+ * debugger. */
+#ifdef configTASK_RETURN_ADDRESS
+    #define portTASK_RETURN_ADDRESS    configTASK_RETURN_ADDRESS
+#else
+    #define portTASK_RETURN_ADDRESS    prvTaskExitError
+#endif
+
+/*
+ * Setup the timer to generate the tick interrupts.  The implementation in this
+ * file is weak to allow application writers to change the timer used to
+ * generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+void xPortPendSVHandler( void ) __attribute__( ( naked ) );
+void xPortSysTickHandler( void );
+void vPortSVCHandler( void );
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void vPortStartFirstTask( void ) __attribute__( ( naked ) );
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/* Each task maintains its own interrupt status in the critical nesting
+ * variable. */
+static UBaseType_t uxCriticalNesting = {0xaaaaaaaa};
+
+/*-----------------------------------------------------------*/
+
+#if ( configSUPPORT_PICO_SYNC_INTEROP == 1 )
+    #include "pico/lock_core.h"
+    #include "hardware/irq.h"
+    #include "event_groups.h"
+    #if configSUPPORT_STATIC_ALLOCATION
+        static StaticEventGroup_t xStaticEventGroup;
+        #define pEventGroup (&xStaticEventGroup)
+    #endif /* configSUPPORT_STATIC_ALLOCATION */
+    static EventGroupHandle_t xEventGroup;
+    #if ( LIB_PICO_MULTICORE == 1 )
+        static EventBits_t uxCrossCoreEventBits;
+        static spin_lock_t * pxCrossCoreSpinLock;
+    #endif /* LIB_PICO_MULTICORE */
+
+    static spin_lock_t * pxYieldSpinLock;
+    static uint32_t ulYieldSpinLockSaveValue;
+#endif /* configSUPPORT_PICO_SYNC_INTEROP */
+
+/*
+ * The number of SysTick increments that make up one tick period.
+ */
+#if ( configUSE_TICKLESS_IDLE == 1 )
+    static uint32_t ulTimerCountsForOneTick = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * The maximum number of tick periods that can be suppressed is limited by the
+ * 24 bit resolution of the SysTick timer.
+ */
+#if ( configUSE_TICKLESS_IDLE == 1 )
+    static uint32_t xMaximumPossibleSuppressedTicks = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Compensate for the CPU cycles that pass while the SysTick is stopped (low
+ * power functionality only.
+ */
+#if ( configUSE_TICKLESS_IDLE == 1 )
+    static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*-----------------------------------------------------------*/
+
+#if ( LIB_PICO_MULTICORE == 1 )
+    #define INVALID_LAUNCH_CORE_NUM 0xffu
+    static uint8_t ucLaunchCoreNum = INVALID_LAUNCH_CORE_NUM;
+    #define portIS_FREE_RTOS_CORE() ( ucLaunchCoreNum == get_core_num() )
+#else
+    #define portIS_FREE_RTOS_CORE() pdTRUE
+#endif /* LIB_PICO_MULTICORE */
+
+/*
+ * See header file for description.
+ */
+StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
+                                     TaskFunction_t pxCode,
+                                     void * pvParameters )
+{
+    /* Simulate the stack frame as it would be created by a context switch
+     * interrupt. */
+    pxTopOfStack--;                                          /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+    *pxTopOfStack = portINITIAL_XPSR;                        /* xPSR */
+    pxTopOfStack--;
+    *pxTopOfStack = ( StackType_t ) pxCode;                  /* PC */
+    pxTopOfStack--;
+    *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+    pxTopOfStack -= 5;                                       /* R12, R3, R2 and R1. */
+    *pxTopOfStack = ( StackType_t ) pvParameters;            /* R0 */
+    pxTopOfStack -= 8;                                       /* R11..R4. */
+
+    return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+    /* A function that implements a task must not exit or attempt to return to
+     * its caller as there is nothing to return to.  If a task wants to exit it
+     * should instead call vTaskDelete( NULL ). */
+    panic_unsupported();
+}
+/*-----------------------------------------------------------*/
+
+void vPortSVCHandler( void )
+{
+    /* This function is no longer used, but retained for backward
+     * compatibility. */
+}
+/*-----------------------------------------------------------*/
+
+void vPortStartFirstTask( void )
+{
+    __asm volatile (
+        "   .syntax unified             \n"
+        "   ldr  r2, =pxCurrentTCB      \n"/* Obtain location of pxCurrentTCB. */
+        "   ldr  r3, [r2]               \n"
+        "   ldr  r0, [r3]               \n"/* The first item in pxCurrentTCB is the task top of stack. */
+        "   adds r0, #32                \n"/* Discard everything up to r0. */
+        "   msr  psp, r0                \n"/* This is now the new top of stack to use in the task. */
+        "   movs r0, #2                 \n"/* Switch to the psp stack. */
+        "   msr  CONTROL, r0            \n"
+        "   isb                         \n"
+        "   pop  {r0-r5}                \n"/* Pop the registers that are saved automatically. */
+        "   mov  lr, r5                 \n"/* lr is now in r5. */
+        "   pop  {r3}                   \n"/* Return address is now in r3. */
+        "   pop  {r2}                   \n"/* Pop and discard XPSR. */
+        "   cpsie i                     \n"/* The first task has its context and interrupts can be enabled. */
+        "   bx   r3                     \n"/* Finally, jump to the user defined task code. */
+    );
+}
+/*-----------------------------------------------------------*/
+
+#if ( LIB_PICO_MULTICORE == 1 ) && ( configSUPPORT_PICO_SYNC_INTEROP == 1)
+    static void prvFIFOInterruptHandler()
+    {
+        /* We must remove the contents (which we don't care about)
+         * to clear the IRQ */
+        multicore_fifo_drain();
+        multicore_fifo_clear_irq();
+        BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+        uint32_t ulSave = spin_lock_blocking( pxCrossCoreSpinLock );
+        EventBits_t ulBits = uxCrossCoreEventBits;
+        uxCrossCoreEventBits &= ~ulBits;
+        spin_unlock( pxCrossCoreSpinLock, ulSave );
+        xEventGroupSetBitsFromISR( xEventGroup, ulBits, &xHigherPriorityTaskWoken );
+        portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+    }
+#endif
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+    /* Make PendSV, CallSV and SysTick the same priority as the kernel. */
+    portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI;
+    portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
+
+    #if (configUSE_DYNAMIC_EXCEPTION_HANDLERS == 1)
+        exception_set_exclusive_handler( PENDSV_EXCEPTION, xPortPendSVHandler );
+        exception_set_exclusive_handler( SYSTICK_EXCEPTION, xPortSysTickHandler );
+        exception_set_exclusive_handler( SVCALL_EXCEPTION, vPortSVCHandler );
+    #endif
+
+    /* Start the timer that generates the tick ISR.  Interrupts are disabled
+     * here already. */
+    vPortSetupTimerInterrupt();
+
+    /* Initialise the critical nesting count ready for the first task. */
+    uxCriticalNesting = 0;
+
+    #if (LIB_PICO_MULTICORE == 1)
+        ucLaunchCoreNum = get_core_num();
+        #if ( configSUPPORT_PICO_SYNC_INTEROP == 1)
+            multicore_fifo_clear_irq();
+            multicore_fifo_drain();
+            uint32_t irq_num = 15 + get_core_num();
+            irq_set_priority( irq_num, portMIN_INTERRUPT_PRIORITY );
+            irq_set_exclusive_handler( irq_num, prvFIFOInterruptHandler );
+            irq_set_enabled( irq_num, 1 );
+        #endif
+    #endif
+
+    /* Start the first task. */
+    vPortStartFirstTask();
+
+    /* Should never get here as the tasks will now be executing!  Call the task
+     * exit error function to prevent compiler warnings about a static function
+     * not being called in the case that the application writer overrides this
+     * functionality by defining configTASK_RETURN_ADDRESS.  Call
+     * vTaskSwitchContext() so link time optimisation does not remove the
+     * symbol. */
+    vTaskSwitchContext();
+    prvTaskExitError();
+
+    /* Should not get here! */
+    return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+    /* Not implemented in ports where there is nothing to return to. */
+    panic_unsupported();
+}
+/*-----------------------------------------------------------*/
+
+void vPortYield( void )
+{
+    #if ( configSUPPORT_PICO_SYNC_INTEROP == 1 )
+        /* We are not in an ISR, and pxYieldSpinLock is always dealt with and
+         * cleared interrupts are re-enabled, so should be NULL */
+        configASSERT( pxYieldSpinLock == NULL );
+    #endif /* configSUPPORT_PICO_SYNC_INTEROP */
+
+    /* Set a PendSV to request a context switch. */
+    portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+
+    /* Barriers are normally not required but do ensure the code is completely
+     * within the specified behaviour for the architecture. */
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+    portDISABLE_INTERRUPTS();
+    uxCriticalNesting++;
+    __asm volatile ( "dsb" ::: "memory" );
+    __asm volatile ( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+    configASSERT( uxCriticalNesting );
+    uxCriticalNesting--;
+    if( uxCriticalNesting == 0 )
+    {
+        portENABLE_INTERRUPTS();
+    }
+}
+
+void vPortEnableInterrupts() {
+    #if ( configSUPPORT_PICO_SYNC_INTEROP == 1 )
+        if( pxYieldSpinLock )
+        {
+            spin_unlock(pxYieldSpinLock, ulYieldSpinLockSaveValue);
+            pxYieldSpinLock = NULL;
+        }
+    #endif
+    __asm volatile ( " cpsie i " ::: "memory" );
+}
+
+/*-----------------------------------------------------------*/
+
+uint32_t ulSetInterruptMaskFromISR( void )
+{
+    __asm volatile (
+        " mrs r0, PRIMASK    \n"
+        " cpsid i            \n"
+        " bx lr                "
+        ::: "memory"
+        );
+}
+/*-----------------------------------------------------------*/
+
+void vClearInterruptMaskFromISR( __attribute__( ( unused ) ) uint32_t ulMask )
+{
+    __asm volatile (
+        " msr PRIMASK, r0    \n"
+        " bx lr                "
+        ::: "memory"
+        );
+}
+/*-----------------------------------------------------------*/
+
+void xPortPendSVHandler( void )
+{
+    /* This is a naked function. */
+
+    __asm volatile
+    (
+        "   .syntax unified                     \n"
+        "   mrs r0, psp                         \n"
+        "                                       \n"
+        "   ldr r3, =pxCurrentTCB               \n"/* Get the location of the current TCB. */
+        "   ldr r2, [r3]                        \n"
+        "                                       \n"
+        "   subs r0, r0, #32                    \n"/* Make space for the remaining low registers. */
+        "   str r0, [r2]                        \n"/* Save the new top of stack. */
+        "   stmia r0!, {r4-r7}                  \n"/* Store the low registers that are not saved automatically. */
+        "   mov r4, r8                          \n"/* Store the high registers. */
+        "   mov r5, r9                          \n"
+        "   mov r6, r10                         \n"
+        "   mov r7, r11                         \n"
+        "   stmia r0!, {r4-r7}                  \n"
+        #if portUSE_DIVIDER_SAVE_RESTORE
+            "   movs r2, #0xd                   \n"/* Store the divider state. */
+            "   lsls r2, #28                    \n"
+            /* We expect that the divider is ready at this point (which is
+             * necessary to safely save/restore), because:
+             * a) if we have not been interrupted since we entered this method,
+             *    then >8 cycles have clearly passed, so the divider is done
+             * b) if we were interrupted in the interim, then any "safe" - i.e.
+             *    does the right thing in an IRQ - use of the divider should
+             *    have waited for any in-process divide to complete, saved and
+             *    then fully restored the result, thus the result is ready in
+             *    that case too. */
+            "   ldr r4, [r2, #0x60]             \n"/* SIO_DIV_UDIVIDEND_OFFSET */
+            "   ldr r5, [r2, #0x64]             \n"/* SIO_DIV_UDIVISOR_OFFSET */
+            "   ldr r6, [r2, #0x74]             \n"/* SIO_DIV_REMAINDER_OFFSET */
+            "   ldr r7, [r2, #0x70]             \n"/* SIO_DIV_QUOTIENT_OFFSET */
+            /* We actually save the divider state in the 4 words below
+             * our recorded stack pointer, so as not to disrupt the stack
+             * frame expected by debuggers - this is addressed by
+             * portEXTRA_STACK_SIZE */
+            "   subs r0, r0, #48                \n"
+            "   stmia r0!, {r4-r7}              \n"
+        #endif /* portUSE_DIVIDER_SAVE_RESTORE */
+        "   push {r3, r14}                      \n"
+        "   cpsid i                             \n"
+        "   bl vTaskSwitchContext               \n"
+        "   cpsie i                             \n"
+        "   pop {r2, r3}                        \n"/* lr goes in r3. r2 now holds tcb pointer. */
+        "                                       \n"
+        "   ldr r1, [r2]                        \n"
+        "   ldr r0, [r1]                        \n"/* The first item in pxCurrentTCB is the task top of stack. */
+        "   adds r0, r0, #16                    \n"/* Move to the high registers. */
+        "   ldmia r0!, {r4-r7}                  \n"/* Pop the high registers. */
+        "   mov r8, r4                          \n"
+        "   mov r9, r5                          \n"
+        "   mov r10, r6                         \n"
+        "   mov r11, r7                         \n"
+        "                                       \n"
+        "   msr psp, r0                         \n"/* Remember the new top of stack for the task. */
+        "                                       \n"
+        #if portUSE_DIVIDER_SAVE_RESTORE
+        "   movs r2, #0xd                       \n"/* Pop the divider state. */
+        "   lsls r2, #28                        \n"
+        "   subs r0, r0, #48                    \n"/* Go back for the divider state */
+        "   ldmia r0!, {r4-r7}                  \n"/* Pop the divider state. */
+        /* Note always restore via SIO_DIV_UDIVI*, because we will overwrite the
+         * results stopping the calculation anyway, however the sign of results
+         * is adjusted by the h/w at read time based on whether the last started
+         * division was signed and the inputs' signs differed */
+        "   str r4, [r2, #0x60]                 \n"/* SIO_DIV_UDIVIDEND_OFFSET */
+        "   str r5, [r2, #0x64]                 \n"/* SIO_DIV_UDIVISOR_OFFSET */
+        "   str r6, [r2, #0x74]                 \n"/* SIO_DIV_REMAINDER_OFFSET */
+        "   str r7, [r2, #0x70]                 \n"/* SIO_DIV_QUOTIENT_OFFSET */
+        #else
+        "   subs r0, r0, #32                    \n"/* Go back for the low registers that are not automatically restored. */
+        #endif /* portUSE_DIVIDER_SAVE_RESTORE */
+        "   ldmia r0!, {r4-r7}                  \n"/* Pop low registers.  */
+        "                                       \n"
+        "   bx r3                               \n"
+    );
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+    uint32_t ulPreviousMask;
+
+    ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
+    {
+        /* Increment the RTOS tick. */
+        if( xTaskIncrementTick() != pdFALSE )
+        {
+            /* Pend a context switch. */
+            portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+        }
+    }
+    portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the systick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+__attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void )
+{
+    /* Calculate the constants required to configure the tick interrupt. */
+    #if ( configUSE_TICKLESS_IDLE == 1 )
+        {
+            ulTimerCountsForOneTick = ( clock_get_hz(clk_sys) / configTICK_RATE_HZ );
+            xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+            ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR;
+        }
+    #endif /* configUSE_TICKLESS_IDLE */
+
+    /* Stop and reset the SysTick. */
+    portNVIC_SYSTICK_CTRL_REG = 0UL;
+    portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+    /* Configure SysTick to interrupt at the requested rate. */
+    portNVIC_SYSTICK_LOAD_REG = ( clock_get_hz( clk_sys ) / configTICK_RATE_HZ ) - 1UL;
+    portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TICKLESS_IDLE == 1 )
+
+    __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+    {
+        uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
+        TickType_t xModifiableIdleTime;
+
+        /* Make sure the SysTick reload value does not overflow the counter. */
+        if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+        {
+            xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+        }
+
+        /* Stop the SysTick momentarily.  The time the SysTick is stopped for
+         * is accounted for as best it can be, but using the tickless mode will
+         * inevitably result in some tiny drift of the time maintained by the
+         * kernel with respect to calendar time. */
+        portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+        /* Calculate the reload value required to wait xExpectedIdleTime
+         * tick periods.  -1 is used because this code will execute part way
+         * through one of the tick periods. */
+        ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+
+        if( ulReloadValue > ulStoppedTimerCompensation )
+        {
+            ulReloadValue -= ulStoppedTimerCompensation;
+        }
+
+        /* Enter a critical section but don't use the taskENTER_CRITICAL()
+         * method as that will mask interrupts that should exit sleep mode. */
+        __asm volatile ( "cpsid i" ::: "memory" );
+        __asm volatile ( "dsb" );
+        __asm volatile ( "isb" );
+
+        /* If a context switch is pending or a task is waiting for the scheduler
+         * to be unsuspended then abandon the low power entry. */
+        if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+        {
+            /* Restart from whatever is left in the count register to complete
+             * this tick period. */
+            portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Reset the reload register to the value required for normal tick
+             * periods. */
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Re-enable interrupts - see comments above the cpsid instruction()
+             * above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+        else
+        {
+            /* Set the new reload value. */
+            portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+            /* Clear the SysTick count flag and set the count value back to
+             * zero. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+            /* Restart SysTick. */
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+            /* Sleep until something happens.  configPRE_SLEEP_PROCESSING() can
+             * set its parameter to 0 to indicate that its implementation contains
+             * its own wait for interrupt or wait for event instruction, and so wfi
+             * should not be executed again.  However, the original expected idle
+             * time variable must remain unmodified, so a copy is taken. */
+            xModifiableIdleTime = xExpectedIdleTime;
+            configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+
+            if( xModifiableIdleTime > 0 )
+            {
+                __asm volatile ( "dsb" ::: "memory" );
+                __asm volatile ( "wfi" );
+                __asm volatile ( "isb" );
+            }
+
+            configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+            /* Re-enable interrupts to allow the interrupt that brought the MCU
+             * out of sleep mode to execute immediately.  see comments above
+             * __disable_interrupt() call above. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable interrupts again because the clock is about to be stopped
+             * and interrupts that execute while the clock is stopped will increase
+             * any slippage between the time maintained by the RTOS and calendar
+             * time. */
+            __asm volatile ( "cpsid i" ::: "memory" );
+            __asm volatile ( "dsb" );
+            __asm volatile ( "isb" );
+
+            /* Disable the SysTick clock without reading the
+             * portNVIC_SYSTICK_CTRL_REG register to ensure the
+             * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.  Again,
+             * the time the SysTick is stopped for is accounted for as best it can
+             * be, but using the tickless mode will inevitably result in some tiny
+             * drift of the time maintained by the kernel with respect to calendar
+             * time*/
+            portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
+
+            /* Determine if the SysTick clock has already counted to zero and
+             * been set back to the current reload value (the reload back being
+             * correct for the entire expected idle time) or if the SysTick is yet
+             * to count to zero (in which case an interrupt other than the SysTick
+             * must have brought the system out of sleep mode). */
+            if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+            {
+                uint32_t ulCalculatedLoadValue;
+
+                /* The tick interrupt is already pending, and the SysTick count
+                 * reloaded with ulReloadValue.  Reset the
+                 * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+                 * period. */
+                ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+                /* Don't allow a tiny value, or values that have somehow
+                 * underflowed because the post sleep hook did something
+                 * that took too long. */
+                if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+                {
+                    ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+                }
+
+                portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+                /* As the pending tick will be processed as soon as this
+                 * function exits, the tick value maintained by the tick is stepped
+                 * forward by one less than the time spent waiting. */
+                ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+            }
+            else
+            {
+                /* Something other than the tick interrupt ended the sleep.
+                 * Work out how long the sleep lasted rounded to complete tick
+                 * periods (not the ulReload value which accounted for part
+                 * ticks). */
+                ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+                /* How many complete tick periods passed while the processor
+                 * was waiting? */
+                ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+                /* The reload value is set to whatever fraction of a single tick
+                 * period remains. */
+                portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+            }
+
+            /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+             * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+             * value. */
+            portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+            portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+            vTaskStepTick( ulCompleteTickPeriods );
+            portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+            /* Exit with interrupts enabled. */
+            __asm volatile ( "cpsie i" ::: "memory" );
+        }
+    }
+
+#endif /* configUSE_TICKLESS_IDLE */
+
+#if ( configSUPPORT_PICO_SYNC_INTEROP == 1 ) || ( configSUPPORT_PICO_TIME_INTEROP == 1 )
+    static TickType_t prvGetTicksToWaitBefore( absolute_time_t t )
+    {
+        int64_t xDelay = absolute_time_diff_us(get_absolute_time(), t);
+        const uint32_t ulTickPeriod = 1000000 / configTICK_RATE_HZ;
+        xDelay -= ulTickPeriod;
+        if( xDelay >= ulTickPeriod )
+        {
+            return xDelay / ulTickPeriod;
+        }
+        return 0;
+    }
+#endif
+
+#if ( configSUPPORT_PICO_SYNC_INTEROP == 1 )
+    uint32_t ulPortLockGetCurrentOwnerId()
+    {
+        if( portIS_FREE_RTOS_CORE())
+        {
+            uint32_t exception = __get_current_exception();
+            if( !exception )
+            {
+                return ( uintptr_t ) xTaskGetCurrentTaskHandle();
+            }
+            /* Note: since ROM as at 0x00000000, these can't be confused with
+             * valid task handles (pointers) in RAM */
+            /* We make all exception handler/core combinations distinct owners */
+            return get_core_num() + exception * 2;
+        }
+        /* Note: since ROM as at 0x00000000, this can't be confused with
+         * valid task handles (pointers) in RAM */
+        return get_core_num();
+    }
+
+    static inline EventBits_t prvGetEventGroupBit( spin_lock_t * spinLock )
+    {
+        uint32_t ulBit;
+        #if ( configUSE_16_BIT_TICKS == 1 )
+            ulBit = 1u << (spin_lock_get_num(spinLock) & 0x7u);
+        #else
+            ulBit = 1u << spin_lock_get_num(spinLock);
+            /* reduce to range 0-24 */
+            ulBit |= ulBit << 8u;
+            ulBit >>= 8u;
+        #endif /* configUSE_16_BIT_TICKS */
+        return ( EventBits_t ) ulBit;
+    }
+
+    static inline EventBits_t prvGetAllEventGroupBits()
+    {
+        #if ( configUSE_16_BIT_TICKS == 1 )
+            return (EventBits_t) 0xffu;
+        #else
+            return ( EventBits_t ) 0xffffffu;
+        #endif /* configUSE_16_BIT_TICKS */
+    }
+
+    void vPortLockInternalSpinUnlockWithWait( struct lock_core * pxLock, uint32_t ulSave )
+    {
+        configASSERT( !portCHECK_IF_IN_ISR() );
+        // note no need to check LIB_PICO_MULTICORE, as this is always returns true if that is not defined
+        if( !portIS_FREE_RTOS_CORE() )
+        {
+            spin_unlock(pxLock->spin_lock, ulSave );
+            __wfe();
+        }
+        else
+        {
+            configASSERT( pxYieldSpinLock == NULL );
+
+            // we want to hold the lock until the event bits have been set; since interrupts are currently disabled
+            // by the spinlock, we can defer until portENABLE_INTERRUPTS is called which is always called when
+            // the scheduler is unlocked during this call
+            configASSERT(pxLock->spin_lock);
+            pxYieldSpinLock = pxLock->spin_lock;
+            ulYieldSpinLockSaveValue = ulSave;
+            xEventGroupWaitBits( xEventGroup, prvGetEventGroupBit(pxLock->spin_lock),
+                                 pdTRUE, pdFALSE, portMAX_DELAY);
+            /* sanity check that interrupts were disabled, then re-enabled during the call, which will have
+             * taken care of the yield */
+            configASSERT( pxYieldSpinLock == NULL);
+        }
+    }
+
+    void vPortLockInternalSpinUnlockWithNotify( struct lock_core *pxLock, uint32_t ulSave ) {
+        EventBits_t uxBits = prvGetEventGroupBit(pxLock->spin_lock );
+        if (portIS_FREE_RTOS_CORE()) {
+            #if LIB_PICO_MULTICORE
+                /* signal an event in case a regular core is waiting */
+                __sev();
+            #endif
+            spin_unlock(pxLock->spin_lock, ulSave );
+            if( !portCHECK_IF_IN_ISR() )
+            {
+                xEventGroupSetBits( xEventGroup, uxBits );
+            }
+            else
+            {
+                BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+                xEventGroupSetBitsFromISR( xEventGroup, uxBits, &xHigherPriorityTaskWoken );
+                portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+            }
+        }
+        else
+        {
+            __sev();
+            #if ( LIB_PICO_MULTICORE == 1)
+                /* We could sent the bits across the FIFO which would have required us to block here if the FIFO was full,
+                 * or we could have just set all bits on the other side, however it seems reasonable instead to take
+                 * the hit of another spin lock to protect an accurate bit set. */
+                if( pxCrossCoreSpinLock != pxLock->spin_lock )
+                {
+                    spin_lock_unsafe_blocking(pxCrossCoreSpinLock);
+                    uxCrossCoreEventBits |= uxBits;
+                    spin_unlock_unsafe(pxCrossCoreSpinLock);
+                }
+                else
+                {
+                    uxCrossCoreEventBits |= uxBits;
+                }
+                /* This causes fifo irq on the other (FreeRTOS) core which will do the set the event bits */
+                sio_hw->fifo_wr = 0;
+            #endif /* LIB_PICO_MULTICORE */
+            spin_unlock(pxLock->spin_lock, ulSave);
+        }
+    }
+
+    bool xPortLockInternalSpinUnlockWithBestEffortWaitOrTimeout( struct lock_core * pxLock, uint32_t ulSave, absolute_time_t uxUntil )
+    {
+        configASSERT( !portCHECK_IF_IN_ISR() );
+        // note no need to check LIB_PICO_MULTICORE, as this is always returns true if that is not defined
+        if( !portIS_FREE_RTOS_CORE() )
+        {
+            spin_unlock(pxLock->spin_lock, ulSave);
+            return best_effort_wfe_or_timeout(uxUntil);
+        }
+        else
+        {
+            configASSERT( portIS_FREE_RTOS_CORE() );
+            configASSERT( pxYieldSpinLock == NULL );
+
+            TickType_t uxTicksToWait = prvGetTicksToWaitBefore( uxUntil );
+            if( uxTicksToWait )
+            {
+                /* We want to hold the lock until the event bits have been set; since interrupts are currently disabled
+                 * by the spinlock, we can defer until portENABLE_INTERRUPTS is called which is always called when
+                 * the scheduler is unlocked during this call */
+                configASSERT(pxLock->spin_lock);
+                pxYieldSpinLock = pxLock->spin_lock;
+                ulYieldSpinLockSaveValue = ulSave;
+                xEventGroupWaitBits( xEventGroup,
+                                     prvGetEventGroupBit(pxLock->spin_lock), pdTRUE,
+                                     pdFALSE, uxTicksToWait );
+                /* sanity check that interrupts were disabled, then re-enabled during the call, which will have
+                 * taken care of the yield */
+                configASSERT( pxYieldSpinLock == NULL );
+            }
+            else
+            {
+                spin_unlock( pxLock->spin_lock, ulSave );
+            }
+            if ( time_reached( uxUntil ) )
+            {
+                return true;
+            }
+            else
+            {
+                /* We do not want to hog the core */
+                portYIELD();
+                /* We aren't sure if we've reached the timeout yet; the caller will check */
+                return false;
+            }
+        }
+    }
+
+    #if ( configSUPPORT_PICO_SYNC_INTEROP == 1)
+        /* runs before main */
+        static void __attribute__((constructor)) prvRuntimeInitializer( void )
+        {
+            /* This must be done even before the scheduler is started, as the spin lock
+             * is used by the overrides of the SDK wait/notify primitives */
+            #if ( LIB_PICO_MULTICORE == 1 )
+                pxCrossCoreSpinLock = spin_lock_instance( next_striped_spin_lock_num() );
+            #endif /* portRUNNING_ON_BOTH_CORES */
+
+            /* The event group is not used prior to scheduler init, but is initialized
+             * here to since it logically belongs with the spin lock */
+            #if ( configSUPPORT_STATIC_ALLOCATION == 1 )
+                xEventGroup = xEventGroupCreateStatic(&xStaticEventGroup);
+            #else
+                xEventGroup = xEventGroupCreate();
+            #endif /* configSUPPORT_STATIC_ALLOCATION */
+        }
+    #endif
+#endif /* configSUPPORT_PICO_SYNC_INTEROP */
+
+#if ( configSUPPORT_PICO_TIME_INTEROP == 1 )
+    void xPortSyncInternalYieldUntilBefore( absolute_time_t t )
+    {
+        TickType_t uxTicksToWait = prvGetTicksToWaitBefore(t);
+        if( uxTicksToWait )
+        {
+            vTaskDelay(uxTicksToWait);
+        }
+    }
+#endif /* configSUPPORT_PICO_TIME_INTEROP */