/****************************************************************************** | |
* AVR32 AT32UC3B0128 XLINK command file for AVR32 IAR C/C++ Compiler. | |
* | |
* The assumed memory layout is the one of the AT32UC3B0128: | |
* | |
* Start Stop Name Type | |
* ---------- ---------- ----- -------------- | |
* 0x00000000 0x00007FFF SRAM RAM | |
* 0x80000000 0x8001FFFF FLASH FLASH | |
* | |
* Usage: xlink your_file(s) -f xcl-file libraries | |
* | |
* - Compiler: IAR EWAVR32 | |
* - Supported devices: AVR32 AT32UC3B0128 | |
* | |
* - author Atmel Corporation: http://www.atmel.com \n | |
* Support and FAQ: http://support.atmel.no/ | |
* | |
******************************************************************************/ | |
/* Copyright (c) 2007, Atmel Corporation All rights reserved. | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* | |
* 3. The name of ATMEL may not be used to endorse or promote products derived | |
* from this software without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND | |
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, | |
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
*/ | |
/************************************************************************/ | |
/* The following segments are defined in this link file: */ | |
/* */ | |
/* Code segments */ | |
/* CODE32 -- Program code used by __code32 functions. */ | |
/* RESET -- Reset code. */ | |
/* EVSEG -- Exception vector handlers. */ | |
/* */ | |
/* Constant segments */ | |
/* INITTAB -- Segment initializer table. */ | |
/* DIFUNCT -- Dynamic initialization vector used by C++. */ | |
/* SWITCH -- Switch tables. */ | |
/* ACTAB -- Table of pointers to acall functions. */ | |
/* */ | |
/* DATA21_ID -- Initialization data for DATA21_I. */ | |
/* DATA32_ID -- Initialization data for DATA32_I. */ | |
/* DATA32_C -- Constant __data32 data. */ | |
/* */ | |
/* CHECKSUM -- Checksum segment. */ | |
/* */ | |
/* Data segments */ | |
/* DATA21_I -- Initialized __data21 data with non-zero */ | |
/* initial value. */ | |
/* DATA32_I -- Initialized __data32 data with non-zero */ | |
/* initial value. */ | |
/* DATA21_Z -- Initialized __data21 data with zero initial value. */ | |
/* DATA32_Z -- Initialized __data32 data with zero initial value. */ | |
/* DATA21_N -- Non-initialized __data21. */ | |
/* DATA32_N -- Non-initialized __data32. */ | |
/* SSTACK -- The system stack. */ | |
/* CSTACK -- The application stack. */ | |
/* HEAP -- The heap used by malloc and free. */ | |
/* */ | |
/************************************************************************/ | |
/************************************************************************/ | |
/* Define CPU */ | |
/************************************************************************/ | |
-cavr32 | |
// Declare the IPR0 memory location | |
-DIPR0=FFFF0800 | |
/************************************************************************/ | |
/* Reset code is located at address 0x80000000 and up. */ | |
/************************************************************************/ | |
-Z(CODE)RESET=80000000-8001FFFF | |
/************************************************************************/ | |
/* The exception handler code is located at address 0x80000000 */ | |
/* and up. Make sure that the exception table gets properly */ | |
/* allocated. By using the special -Z@ allocation primitive, the */ | |
/* placement is guaranteed to be at _EVBASE and onwards. */ | |
/************************************************************************/ | |
-Z@(CODE)EVTAB=80004000-8001FFFF | |
-Z@(CODE)EV100=80004100-8001FFFF | |
-P(CODE)EVSEG=80004000-8001FFFF | |
/************************************************************************/ | |
/* Allocate code and const segments. */ | |
/************************************************************************/ | |
-P(CODE)CODE32=80000000-8001FFFF | |
-P(CONST)DATA32_C=80000000-8001FFFF | |
// Initializers | |
-Z(CONST)INITTAB,DIFUNCT=80000000-8001FFFF | |
-Z(CONST)CHECKSUM,SWITCH=80000000-8001FFFF | |
-Z(CONST)DATA21_ID,DATA32_ID=80000000-8001FFFF | |
-Z(CONST)ACTAB,HTAB=80000000-8001FFFF | |
/************************************************************************/ | |
/* Allocate the read/write segments that are mapped to RAM. */ | |
/************************************************************************/ | |
-Z(DATA)DATA21_I,DATA21_Z,DATA21_N=00000004-00007FFF | |
-Z(DATA)DATA32_I,DATA32_Z,DATA32_N=00000004-00007FFF | |
-Z(DATA)TRACEBUFFER=00000004-00007FFF | |
-Z(DATA)SSTACK+_SSTACK_SIZE#00000004-00007FFF | |
-Z(DATA)CSTACK+_CSTACK_SIZE#00000004-00007FFF | |
-Z(DATA)HEAP+_HEAP_SIZE=00000004-00007FFF | |
/************************************************************************/ | |
/* End of File */ | |
/************************************************************************/ |