/*
 * FreeRTOS Kernel V10.3.0
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */


/*
 * Creates all the demo application tasks, then starts the scheduler.  The WEB
 * documentation provides more details of the standard demo application tasks.
 * In addition to the standard demo tasks, the following tasks and tests are
 * defined and/or created within this file:
 *
 * "Fast Interrupt Test" - A high frequency periodic interrupt is generated
 * using a free running timer to demonstrate the use of the
 * configKERNEL_INTERRUPT_PRIORITY configuration constant.  The interrupt
 * service routine measures the number of processor clocks that occur between
 * each interrupt - and in so doing measures the jitter in the interrupt timing.
 * The maximum measured jitter time is latched in the ulMaxJitter variable, and
 * displayed on the OLED display by the 'OLED' task as described below.  The
 * fast interrupt is configured and handled in the timertest.c source file.
 *
 * "OLED" task - the OLED task is a 'gatekeeper' task.  It is the only task that
 * is permitted to access the display directly.  Other tasks wishing to write a
 * message to the OLED send the message on a queue to the OLED task instead of
 * accessing the OLED themselves.  The OLED task just blocks on the queue waiting
 * for messages - waking and displaying the messages as they arrive.
 *
 * "Check" hook -  This only executes every five seconds from the tick hook.
 * Its main function is to check that all the standard demo tasks are still
 * operational.  Should any unexpected behaviour within a demo task be discovered
 * the tick hook will write an error to the OLED (via the OLED task).  If all the
 * demo tasks are executing with their expected behaviour then the check task
 * writes PASS to the OLED (again via the OLED task), as described above.
 *
 * "uIP" task -  This is the task that handles the uIP stack.  All TCP/IP
 * processing is performed in this task.
 */




/*************************************************************************
 * Please ensure to read http://www.freertos.org/portLM3Sxxxx_Eclipse.html
 * which provides information on configuring and running this demo for the
 * various Luminary Micro EKs.
 *************************************************************************/




/* Standard includes. */
#include <stdio.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"
#include "semphr.h"

/* Hardware library includes. */
#include "hw_memmap.h"
#include "hw_types.h"
#include "hw_sysctl.h"
#include "sysctl.h"
#include "gpio.h"
#include "grlib.h"
#include "rit128x96x4.h"
#include "osram128x64x4.h"
#include "formike128x128x16.h"

/* Demo app includes. */
#include "BlockQ.h"
#include "death.h"
#include "integer.h"
#include "blocktim.h"
#include "flash.h"
#include "partest.h"
#include "semtest.h"
#include "PollQ.h"
#include "lcd_message.h"
#include "bitmap.h"
#include "GenQTest.h"
#include "QPeek.h"
#include "recmutex.h"
#include "IntQueue.h"
#include "QueueSet.h"

/*-----------------------------------------------------------*/

/* The time between cycles of the 'check' functionality (defined within the
tick hook. */
#define mainCHECK_DELAY						( ( TickType_t ) 5000 / portTICK_PERIOD_MS )

/* Size of the stack allocated to the uIP task. */
#define mainBASIC_WEB_STACK_SIZE            ( configMINIMAL_STACK_SIZE * 3 )

/* The OLED task uses the sprintf function so requires a little more stack too. */
#define mainOLED_TASK_STACK_SIZE			( configMINIMAL_STACK_SIZE + 50 )

/* Task priorities. */
#define mainQUEUE_POLL_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainCHECK_TASK_PRIORITY				( tskIDLE_PRIORITY + 3 )
#define mainSEM_TEST_PRIORITY				( tskIDLE_PRIORITY + 1 )
#define mainBLOCK_Q_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainCREATOR_TASK_PRIORITY           ( tskIDLE_PRIORITY + 3 )
#define mainINTEGER_TASK_PRIORITY           ( tskIDLE_PRIORITY )
#define mainGEN_QUEUE_TASK_PRIORITY			( tskIDLE_PRIORITY )

/* The maximum number of message that can be waiting for display at any one
time. */
#define mainOLED_QUEUE_SIZE					( 3 )

/* Dimensions the buffer into which the jitter time is written. */
#define mainMAX_MSG_LEN						25

/* The period of the system clock in nano seconds.  This is used to calculate
the jitter time in nano seconds. */
#define mainNS_PER_CLOCK					( ( unsigned long ) ( ( 1.0 / ( double ) configCPU_CLOCK_HZ ) * 1000000000.0 ) )

/* Constants used when writing strings to the display. */
#define mainCHARACTER_HEIGHT				( 9 )
#define mainMAX_ROWS_128					( mainCHARACTER_HEIGHT * 14 )
#define mainMAX_ROWS_96						( mainCHARACTER_HEIGHT * 10 )
#define mainMAX_ROWS_64						( mainCHARACTER_HEIGHT * 7 )
#define mainFULL_SCALE						( 15 )
#define ulSSI_FREQUENCY						( 3500000UL )

/*-----------------------------------------------------------*/

/*
 * The task that handles the uIP stack.  All TCP/IP processing is performed in
 * this task.
 */
extern void vuIP_Task( void *pvParameters );

/*
 * The display is written two by more than one task so is controlled by a
 * 'gatekeeper' task.  This is the only task that is actually permitted to
 * access the display directly.  Other tasks wanting to display a message send
 * the message to the gatekeeper.
 */
static void vOLEDTask( void *pvParameters );

/*
 * Configure the hardware for the demo.
 */
static void prvSetupHardware( void );

/*
 * Configures the high frequency timers - those used to measure the timing
 * jitter while the real time kernel is executing.
 */
extern void vSetupHighFrequencyTimer( void );

/*
 * The idle hook is used to run a test of the scheduler context switch
 * mechanism.
 */
void vApplicationIdleHook( void ) __attribute__((naked));
/*-----------------------------------------------------------*/

/* The queue used to send messages to the OLED task. */
QueueHandle_t xOLEDQueue;

/* The welcome text. */
const char * const pcWelcomeMessage = "   www.FreeRTOS.org";

/* Variables used to detect the test in the idle hook failing. */
unsigned long ulIdleError = pdFALSE;

/*-----------------------------------------------------------*/

/*************************************************************************
 * Please ensure to read http://www.freertos.org/portLM3Sxxxx_Eclipse.html
 * which provides information on configuring and running this demo for the
 * various Luminary Micro EKs.
 *************************************************************************/
int main( void )
{
	prvSetupHardware();

	/* Create the queue used by the OLED task.  Messages for display on the OLED
	are received via this queue. */
	xOLEDQueue = xQueueCreate( mainOLED_QUEUE_SIZE, sizeof( xOLEDMessage ) );

	/* Create the uIP task if running on a processor that includes a MAC and
	PHY. */
	if( SysCtlPeripheralPresent( SYSCTL_PERIPH_ETH ) )
	{
		xTaskCreate( vuIP_Task, "uIP", mainBASIC_WEB_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
	}

	/* Start the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartQueuePeekTasks();
    vStartRecursiveMutexTasks();
    vStartInterruptQueueTasks();
    vStartQueueSetTasks();

	/* Start the tasks defined within this file/specific to this demo. */
	xTaskCreate( vOLEDTask, "OLED", mainOLED_TASK_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	/* The suicide tasks must be created last as they need to know how many
	tasks were running prior to their creation in order to ascertain whether
	or not the correct/expected number of tasks are running at any given time. */
    vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Configure the high frequency interrupt used to measure the interrupt
	jitter time. */
	vSetupHighFrequencyTimer();

	/* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient memory to create the idle
    task. */
	for( ;; );
	return 0;
}
/*-----------------------------------------------------------*/

void prvSetupHardware( void )
{
    /* If running on Rev A2 silicon, turn the LDO voltage up to 2.75V.  This is
    a workaround to allow the PLL to operate reliably. */
    if( DEVICE_IS_REVA2 )
    {
        SysCtlLDOSet( SYSCTL_LDO_2_75V );
    }

	/* Set the clocking to run from the PLL at 50 MHz */
	SysCtlClockSet( SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_8MHZ );

	/* 	Enable Port F for Ethernet LEDs
		LED0        Bit 3   Output
		LED1        Bit 2   Output */
	SysCtlPeripheralEnable( SYSCTL_PERIPH_GPIOF );
	GPIODirModeSet( GPIO_PORTF_BASE, (GPIO_PIN_2 | GPIO_PIN_3), GPIO_DIR_MODE_HW );
	GPIOPadConfigSet( GPIO_PORTF_BASE, (GPIO_PIN_2 | GPIO_PIN_3 ), GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD );

	vParTestInitialise();
}
/*-----------------------------------------------------------*/

void vApplicationTickHook( void )
{
static xOLEDMessage xMessage = { "PASS" };
static unsigned long ulTicksSinceLastDisplay = 0;
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;

	/* Called from every tick interrupt.  Have enough ticks passed to make it
	time to perform our health status check again? */
	ulTicksSinceLastDisplay++;
	if( ulTicksSinceLastDisplay >= mainCHECK_DELAY )
	{
		ulTicksSinceLastDisplay = 0;

		/* Has an error been found in any task? */
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN GEN Q";
		}
		else if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN PEEK Q";
		}
		else if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK Q";
		}
		else if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN BLOCK TIME";
		}
	    else if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN SEMAPHORE";
	    }
	    else if( xArePollingQueuesStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN POLL Q";
	    }
	    else if( xIsCreateTaskStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN CREATE";
	    }
	    else if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
	    {
	        xMessage.pcMessage = "ERROR IN MATH";
	    }
	    else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )
	    {
	    	xMessage.pcMessage = "ERROR IN REC MUTEX";
	    }
		else if( ulIdleError != pdFALSE )
		{
			xMessage.pcMessage = "ERROR IN HOOK";
		}
		else if( xAreIntQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR IN INT QUEUE";
		}
		else if( xAreQueueSetTasksStillRunning() != pdTRUE )
		{
        	xMessage.pcMessage = "ERROR IN QUEUE SET";
		}

		/* Send the message to the OLED gatekeeper for display. */
		xHigherPriorityTaskWoken = pdFALSE;
		xQueueSendFromISR( xOLEDQueue, &xMessage, &xHigherPriorityTaskWoken );
	}

	/* Exercise the queue sets from an ISR. */
    vQueueSetAccessQueueSetFromISR();
}
/*-----------------------------------------------------------*/

void vOLEDTask( void *pvParameters )
{
xOLEDMessage xMessage;
unsigned long ulY, ulMaxY;
static char cMessage[ mainMAX_MSG_LEN ];
extern volatile unsigned long ulMaxJitter;
unsigned portBASE_TYPE uxUnusedStackOnEntry;
const unsigned char *pucImage;

/* Functions to access the OLED.  The one used depends on the dev kit
being used. */
void ( *vOLEDInit )( unsigned long ) = NULL;
void ( *vOLEDStringDraw )( const char *, unsigned long, unsigned long, unsigned char ) = NULL;
void ( *vOLEDImageDraw )( const unsigned char *, unsigned long, unsigned long, unsigned long, unsigned long ) = NULL;
void ( *vOLEDClear )( void ) = NULL;

	/* Just for demo purposes. */
	uxUnusedStackOnEntry = uxTaskGetStackHighWaterMark( NULL );

	/* Map the OLED access functions to the driver functions that are appropriate
	for the evaluation kit being used. */
	switch( HWREG( SYSCTL_DID1 ) & SYSCTL_DID1_PRTNO_MASK )
	{
		case SYSCTL_DID1_PRTNO_6965	:
		case SYSCTL_DID1_PRTNO_2965	:	vOLEDInit = OSRAM128x64x4Init;
										vOLEDStringDraw = OSRAM128x64x4StringDraw;
										vOLEDImageDraw = OSRAM128x64x4ImageDraw;
										vOLEDClear = OSRAM128x64x4Clear;
										ulMaxY = mainMAX_ROWS_64;
										pucImage = pucBasicBitmap;
										break;

		case SYSCTL_DID1_PRTNO_1968	:
		case SYSCTL_DID1_PRTNO_8962 :	vOLEDInit = RIT128x96x4Init;
										vOLEDStringDraw = RIT128x96x4StringDraw;
										vOLEDImageDraw = RIT128x96x4ImageDraw;
										vOLEDClear = RIT128x96x4Clear;
										ulMaxY = mainMAX_ROWS_96;
										pucImage = pucBasicBitmap;
										break;

		default						:	vOLEDInit = vFormike128x128x16Init;
										vOLEDStringDraw = vFormike128x128x16StringDraw;
										vOLEDImageDraw = vFormike128x128x16ImageDraw;
										vOLEDClear = vFormike128x128x16Clear;
										ulMaxY = mainMAX_ROWS_128;
										pucImage = pucGrLibBitmap;
										break;
	}

	ulY = ulMaxY;

	/* Initialise the OLED and display a startup message. */
	vOLEDInit( ulSSI_FREQUENCY );
	vOLEDStringDraw( "POWERED BY FreeRTOS", 0, 0, mainFULL_SCALE );
	vOLEDImageDraw( pucImage, 0, mainCHARACTER_HEIGHT + 1, bmpBITMAP_WIDTH, bmpBITMAP_HEIGHT );

	for( ;; )
	{
		/* Wait for a message to arrive that requires displaying. */
		xQueueReceive( xOLEDQueue, &xMessage, portMAX_DELAY );

		/* Write the message on the next available row. */
		ulY += mainCHARACTER_HEIGHT;
		if( ulY >= ulMaxY )
		{
			ulY = mainCHARACTER_HEIGHT;
			vOLEDClear();
			vOLEDStringDraw( pcWelcomeMessage, 0, 0, mainFULL_SCALE );
		}

		/* Display the message along with the maximum jitter time from the
		high priority time test. */
		sprintf( cMessage, "%s [%uns]", xMessage.pcMessage, ulMaxJitter * mainNS_PER_CLOCK );
		vOLEDStringDraw( cMessage, 0, ulY, mainFULL_SCALE );
	}
}
/*-----------------------------------------------------------*/

void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName )
{
	for( ;; );
}
/*-----------------------------------------------------------*/

void vApplicationMallocFailedHook( void )
{
	for( ;; );
}
/*-----------------------------------------------------------*/

/* Just to keep the linker happy. */
void __error__( char *pcFilename, unsigned long ulLine )
{
	for( ;; );
}

int uipprintf( const char *fmt, ... )
{
	return( 0 );
}