/** | |
****************************************************************************** | |
* @file stm32_eval.h | |
* @author MCD Application Team | |
* @version V4.4.0RC1 | |
* @date 07/02/2010 | |
* @brief Header file for stm32_eval.c module. | |
****************************************************************************** | |
* @copy | |
* | |
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS | |
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE | |
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY | |
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING | |
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE | |
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. | |
* | |
* <h2><center>© COPYRIGHT 2010 STMicroelectronics</center></h2> | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32_EVAL_H | |
#define __STM32_EVAL_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
/** @addtogroup Utilities | |
* @{ | |
*/ | |
/** @addtogroup STM32_EVAL | |
* @{ | |
*/ | |
/** @defgroup STM32_EVAL_Abstraction_Layer | |
* @{ | |
*/ | |
/** @defgroup STM32_EVAL_HARDWARE_RESOURCES | |
* @{ | |
*/ | |
/** | |
@code | |
The table below gives an overview of the hardware resources supported by each | |
STM32 EVAL board. | |
- LCD: TFT Color LCD (Parallel (FSMC) and Serial (SPI)) | |
- IOE: IO Expander on I2C | |
- sFLASH: serial SPI FLASH (M25Pxxx) | |
- sEE: serial I2C EEPROM (M24C08, M24C32, M24C64) | |
- TSENSOR: Temperature Sensor (LM75) | |
- SD: SD Card memory (SPI and SDIO (SD Card MODE)) | |
=================================================================================================================+ | |
STM32 EVAL | LED | Buttons | Com Ports | LCD | IOE | sFLASH | sEE | TSENSOR | SD (SPI) | SD(SDIO) | | |
=================================================================================================================+ | |
STM3210B-EVAL | 4 | 8 | 2 | YES (SPI) | NO | YES | NO | YES | YES | NO | | |
-----------------------------------------------------------------------------------------------------------------+ | |
STM3210E-EVAL | 4 | 8 | 2 | YES (FSMC)| NO | YES | NO | YES | NO | YES | | |
-----------------------------------------------------------------------------------------------------------------+ | |
STM3210C-EVAL | 4 | 3 | 1 | YES (SPI) | YES | NO | YES | NO | YES | NO | | |
-----------------------------------------------------------------------------------------------------------------+ | |
STM32100B-EVAL | 4 | 8 | 2 | YES (SPI) | NO | YES | NO | YES | YES | NO | | |
-----------------------------------------------------------------------------------------------------------------+ | |
STM32L152-EVAL | 4 | 8 | 2 | YES (SPI) | NO | NO | NO | YES | YES | NO | | |
=================================================================================================================+ | |
@endcode | |
*/ | |
/** | |
* @} | |
*/ | |
/** @defgroup STM32_EVAL_Exported_Types | |
* @{ | |
*/ | |
typedef enum | |
{ | |
LED1 = 0, | |
LED2 = 1, | |
LED3 = 2, | |
LED4 = 3 | |
} Led_TypeDef; | |
typedef enum | |
{ | |
BUTTON_WAKEUP = 0, | |
BUTTON_TAMPER = 1, | |
BUTTON_KEY = 2, | |
BUTTON_RIGHT = 3, | |
BUTTON_LEFT = 4, | |
BUTTON_UP = 5, | |
BUTTON_DOWN = 6, | |
BUTTON_SEL = 7 | |
} Button_TypeDef; | |
typedef enum | |
{ | |
BUTTON_MODE_GPIO = 0, | |
BUTTON_MODE_EXTI = 1 | |
} ButtonMode_TypeDef; | |
typedef enum | |
{ | |
JOY_NONE = 0, | |
JOY_SEL = 1, | |
JOY_DOWN = 2, | |
JOY_LEFT = 3, | |
JOY_RIGHT = 4, | |
JOY_UP = 5 | |
} JOYState_TypeDef | |
; | |
typedef enum | |
{ | |
COM1 = 0, | |
COM2 = 1 | |
} COM_TypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup STM32_EVAL_Exported_Constants | |
* @{ | |
*/ | |
/** | |
* @brief Uncomment the line corresponding to the STMicroelectronics evaluation | |
* board used in your application. | |
* | |
* Tip: To avoid modifying this file each time you need to switch between these | |
* boards, you can define the board in your toolchain compiler preprocessor. | |
*/ | |
#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL)\ | |
&& !defined (USE_STM3210C_EVAL) && !defined (USE_STM32L152_EVAL) | |
//#define USE_STM32100B_EVAL | |
//#define USE_STM3210B_EVAL | |
//#define USE_STM3210E_EVAL | |
//#define USE_STM3210C_EVAL | |
//#define USE_STM32L152_EVAL | |
#endif | |
#ifdef USE_STM32100B_EVAL | |
#include "stm32f10x.h" | |
#include "stm32100b_eval/stm32100b_eval.h" | |
#elif defined USE_STM3210B_EVAL | |
#include "stm32f10x.h" | |
#include "stm3210b_eval/stm3210b_eval.h" | |
#elif defined USE_STM3210E_EVAL | |
#include "stm32f10x.h" | |
#include "stm3210e_eval/stm3210e_eval.h" | |
#elif defined USE_STM3210C_EVAL | |
#include "stm32f10x.h" | |
#include "stm3210c_eval/stm3210c_eval.h" | |
#elif defined USE_STM32L152_EVAL | |
#include "stm32l1xx.h" | |
#include "stm32l152_eval/stm32l152_eval.h" | |
#else | |
#error "Please select first the STM32 EVAL board to be used (in stm32_eval.h)" | |
#endif | |
/** | |
* @brief STM32 Button Defines Legacy | |
*/ | |
#define Button_WAKEUP BUTTON_WAKEUP | |
#define Button_TAMPER BUTTON_TAMPER | |
#define Button_KEY BUTTON_KEY | |
#define Button_RIGHT BUTTON_RIGHT | |
#define Button_LEFT BUTTON_LEFT | |
#define Button_UP BUTTON_UP | |
#define Button_DOWN BUTTON_DOWN | |
#define Button_SEL BUTTON_SEL | |
#define Mode_GPIO BUTTON_MODE_GPIO | |
#define Mode_EXTI BUTTON_MODE_EXTI | |
#define Button_Mode_TypeDef ButtonMode_TypeDef | |
#define JOY_CENTER JOY_SEL | |
#define JOY_State_TypeDef JOYState_TypeDef | |
/** | |
* @brief LCD Defines Legacy | |
*/ | |
#define LCD_RSNWR_GPIO_CLK LCD_NWR_GPIO_CLK | |
#define LCD_SPI_GPIO_PORT LCD_SPI_SCK_GPIO_PORT | |
#define LCD_SPI_GPIO_CLK LCD_SPI_SCK_GPIO_CLK | |
#define R0 LCD_REG_0 | |
#define R1 LCD_REG_1 | |
#define R2 LCD_REG_2 | |
#define R3 LCD_REG_3 | |
#define R4 LCD_REG_4 | |
#define R5 LCD_REG_5 | |
#define R6 LCD_REG_6 | |
#define R7 LCD_REG_7 | |
#define R8 LCD_REG_8 | |
#define R9 LCD_REG_9 | |
#define R10 LCD_REG_10 | |
#define R12 LCD_REG_12 | |
#define R13 LCD_REG_13 | |
#define R14 LCD_REG_14 | |
#define R15 LCD_REG_15 | |
#define R16 LCD_REG_16 | |
#define R17 LCD_REG_17 | |
#define R18 LCD_REG_18 | |
#define R19 LCD_REG_19 | |
#define R20 LCD_REG_20 | |
#define R21 LCD_REG_21 | |
#define R22 LCD_REG_22 | |
#define R23 LCD_REG_23 | |
#define R24 LCD_REG_24 | |
#define R25 LCD_REG_25 | |
#define R26 LCD_REG_26 | |
#define R27 LCD_REG_27 | |
#define R28 LCD_REG_28 | |
#define R29 LCD_REG_29 | |
#define R30 LCD_REG_30 | |
#define R31 LCD_REG_31 | |
#define R32 LCD_REG_32 | |
#define R33 LCD_REG_33 | |
#define R34 LCD_REG_34 | |
#define R36 LCD_REG_36 | |
#define R37 LCD_REG_37 | |
#define R40 LCD_REG_40 | |
#define R41 LCD_REG_41 | |
#define R43 LCD_REG_43 | |
#define R45 LCD_REG_45 | |
#define R48 LCD_REG_48 | |
#define R49 LCD_REG_49 | |
#define R50 LCD_REG_50 | |
#define R51 LCD_REG_51 | |
#define R52 LCD_REG_52 | |
#define R53 LCD_REG_53 | |
#define R54 LCD_REG_54 | |
#define R55 LCD_REG_55 | |
#define R56 LCD_REG_56 | |
#define R57 LCD_REG_57 | |
#define R59 LCD_REG_59 | |
#define R60 LCD_REG_60 | |
#define R61 LCD_REG_61 | |
#define R62 LCD_REG_62 | |
#define R63 LCD_REG_63 | |
#define R64 LCD_REG_64 | |
#define R65 LCD_REG_65 | |
#define R66 LCD_REG_66 | |
#define R67 LCD_REG_67 | |
#define R68 LCD_REG_68 | |
#define R69 LCD_REG_69 | |
#define R70 LCD_REG_70 | |
#define R71 LCD_REG_71 | |
#define R72 LCD_REG_72 | |
#define R73 LCD_REG_73 | |
#define R74 LCD_REG_74 | |
#define R75 LCD_REG_75 | |
#define R76 LCD_REG_76 | |
#define R77 LCD_REG_77 | |
#define R78 LCD_REG_78 | |
#define R79 LCD_REG_79 | |
#define R80 LCD_REG_80 | |
#define R81 LCD_REG_81 | |
#define R82 LCD_REG_82 | |
#define R83 LCD_REG_83 | |
#define R96 LCD_REG_96 | |
#define R97 LCD_REG_97 | |
#define R106 LCD_REG_106 | |
#define R118 LCD_REG_118 | |
#define R128 LCD_REG_128 | |
#define R129 LCD_REG_129 | |
#define R130 LCD_REG_130 | |
#define R131 LCD_REG_131 | |
#define R132 LCD_REG_132 | |
#define R133 LCD_REG_133 | |
#define R134 LCD_REG_134 | |
#define R135 LCD_REG_135 | |
#define R136 LCD_REG_136 | |
#define R137 LCD_REG_137 | |
#define R139 LCD_REG_139 | |
#define R140 LCD_REG_140 | |
#define R141 LCD_REG_141 | |
#define R143 LCD_REG_143 | |
#define R144 LCD_REG_144 | |
#define R145 LCD_REG_145 | |
#define R146 LCD_REG_146 | |
#define R147 LCD_REG_147 | |
#define R148 LCD_REG_148 | |
#define R149 LCD_REG_149 | |
#define R150 LCD_REG_150 | |
#define R151 LCD_REG_151 | |
#define R152 LCD_REG_152 | |
#define R153 LCD_REG_153 | |
#define R154 LCD_REG_154 | |
#define R157 LCD_REG_157 | |
#define R192 LCD_REG_192 | |
#define R193 LCD_REG_193 | |
#define R227 LCD_REG_227 | |
#define R229 LCD_REG_229 | |
#define R231 LCD_REG_231 | |
#define R239 LCD_REG_239 | |
#define White LCD_COLOR_WHITE | |
#define Black LCD_COLOR_BLACK | |
#define Grey LCD_COLOR_GREY | |
#define Blue LCD_COLOR_BLUE | |
#define Blue2 LCD_COLOR_BLUE2 | |
#define Red LCD_COLOR_RED | |
#define Magenta LCD_COLOR_MAGENTA | |
#define Green LCD_COLOR_GREEN | |
#define Cyan LCD_COLOR_CYAN | |
#define Yellow LCD_COLOR_YELLOW | |
#define Line0 LCD_LINE_0 | |
#define Line1 LCD_LINE_1 | |
#define Line2 LCD_LINE_2 | |
#define Line3 LCD_LINE_3 | |
#define Line4 LCD_LINE_4 | |
#define Line5 LCD_LINE_5 | |
#define Line6 LCD_LINE_6 | |
#define Line7 LCD_LINE_7 | |
#define Line8 LCD_LINE_8 | |
#define Line9 LCD_LINE_9 | |
#define Horizontal LCD_DIR_HORIZONTAL | |
#define Vertical LCD_DIR_VERTICAL | |
/** | |
* @} | |
*/ | |
/** @defgroup STM32_EVAL_Exported_Macros | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/** @defgroup STM32_EVAL_Exported_Functions | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32_EVAL_H */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/ |