blob: 7dc570554c272fe37ebe794a37db448489264505 [file] [log] [blame]
/*
* FreeRTOS Kernel V10.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/******************************************************************************
* This project provides two demo applications. A simple blinky style project,
* and a more comprehensive test and demo application. The
* mainCREATE_SIMPLE_BLINKY_DEMO_ONLY setting (defined in this file) is used to
* select between the two. The simply blinky demo is implemented and described
* in main_blinky.c. The more comprehensive test and demo application is
* implemented and described in main_full.c.
*
* This file implements the code that is not demo specific, including the
* hardware setup and FreeRTOS hook functions.
*
* ENSURE TO READ THE DOCUMENTATION PAGE FOR THIS PORT AND DEMO APPLICATION ON
* THE http://www.FreeRTOS.org WEB SITE FOR FULL INFORMATION ON USING THIS DEMO
* APPLICATION, AND ITS ASSOCIATE FreeRTOS ARCHITECTURE PORT!
* http://www.FreeRTOS.org/RTOS_Intel_Quark_Galileo_GCC.html
*
*/
/* Standard includes. */
#include <stdlib.h>
/* Scheduler include files. */
#include "FreeRTOS.h"
#include "task.h"
#include "semphr.h"
/* Standard demo includes, only necessary for the tick hook. */
#include "TimerDemo.h"
#include "QueueOverwrite.h"
#include "EventGroupsDemo.h"
#include "QueueSet.h"
#include "TaskNotify.h"
#include "IntQueue.h"
/* Added Galileo serial support. */
#include "galileo_support.h"
/* Set to 1 to sit in a loop on start up, allowing a debugger to connect to the
application before main() executes. */
#define mainWAIT_FOR_DEBUG_CONNECTION 0
/* Set mainCREATE_SIMPLE_BLINKY_DEMO_ONLY to one to run the simple blinky demo,
or 0 to run the more comprehensive test and demo application. */
#define mainCREATE_SIMPLE_BLINKY_DEMO_ONLY 1
/*-----------------------------------------------------------*/
/*
* main_blinky() is used when mainCREATE_SIMPLE_BLINKY_DEMO_ONLY is set to 1.
* main_full() is used when mainCREATE_SIMPLE_BLINKY_DEMO_ONLY is set to 0.
*/
#if( mainCREATE_SIMPLE_BLINKY_DEMO_ONLY == 1 )
extern void main_blinky( void );
#else
extern void main_full( void );
#endif /* mainCREATE_SIMPLE_BLINKY_DEMO_ONLY == 1 */
/* Prototypes for functions called from asm start up code. */
int main( void );
void CRT_Init( void );
/*
* Prototypes for the standard FreeRTOS callback/hook functions implemented
* within this file.
*/
void vApplicationMallocFailedHook( void );
void vApplicationIdleHook( void );
void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName );
void vApplicationTickHook( void );
/*
* Perform any hardware/peripheral related initialisation necessary to run the
* demo.
*/
static void prvSetupHardware( void );
static void prvCalibrateLVTimer( void );
/*
* If mainWAIT_FOR_DEBUG_CONNECTION is set to 1 then the following function will
* sit in a loop on start up, allowing a debugger to connect to the application
* before main() executes. If mainWAIT_FOR_DEBUG_CONNECTION is not set to 1
* then the following function does nothing.
*/
static void prvLoopToWaitForDebugConnection( void );
/*
* Helper functions used when an assert is triggered. The first periodically
* displays an assert message, and the second clears the assert message when the
* function called by the configASSERT() macro is exited.
*/
static void prvDisplayAssertion( const char * pcFile, unsigned long ulLine );
static void prvClearAssertionLine( void );
/*-----------------------------------------------------------*/
/* See http://www.FreeRTOS.org/RTOS_Intel_Quark_Galileo_GCC.html for usage
instructions. */
int main( void )
{
/* Optionally wait for a debugger to connect. */
prvLoopToWaitForDebugConnection();
/* Init the UART, GPIO, etc. */
prvSetupHardware();
/* The mainCREATE_SIMPLE_BLINKY_DEMO_ONLY setting is described at the top
of this file. */
#if( mainCREATE_SIMPLE_BLINKY_DEMO_ONLY == 1 )
{
g_printf_rcc( 3, 2, DEFAULT_SCREEN_COLOR, "Running main_blinky()." );
main_blinky();
}
#else
{
g_printf_rcc( 3, 2, DEFAULT_SCREEN_COLOR, "Running main_full()." );
main_full();
}
#endif
return 0;
}
/*-----------------------------------------------------------*/
void vApplicationMallocFailedHook( void )
{
/* Called if a call to pvPortMalloc() fails because there is insufficient
free memory available in the FreeRTOS heap. pvPortMalloc() is called
internally by FreeRTOS API functions that create tasks, queues, software
timers, and semaphores. The size of the FreeRTOS heap is set by the
configTOTAL_HEAP_SIZE configuration constant in FreeRTOSConfig.h.
Force an assert. */
configASSERT( xTaskGetTickCount() == 0 );
taskDISABLE_INTERRUPTS();
for( ;; );
}
/*-----------------------------------------------------------*/
void vApplicationStackOverflowHook( TaskHandle_t pxTask, char *pcTaskName )
{
( void ) pcTaskName;
( void ) pxTask;
/* Run time stack overflow checking is performed if
configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook
function is called if a stack overflow is detected.
Increase the size of the stack allocated to the offending task.
Force an assert. */
configASSERT( pxTask == NULL );
taskDISABLE_INTERRUPTS();
for( ;; );
}
/*-----------------------------------------------------------*/
void vApplicationIdleHook( void )
{
volatile unsigned long xFreeHeapSpace;
/* This is just a trivial example of an idle hook. It is called on each
cycle of the idle task. It must *NOT* attempt to block. In this case the
idle task just queries the amount of FreeRTOS heap that remains. See the
memory management section on the http://www.FreeRTOS.org web site for memory
management options. If there is a lot of heap memory free then the
configTOTAL_HEAP_SIZE value in FreeRTOSConfig.h can be reduced to free up
RAM. */
xFreeHeapSpace = xPortGetFreeHeapSize();
/* Remove compiler warning about xFreeHeapSpace being set but never used. */
( void ) xFreeHeapSpace;
}
/*-----------------------------------------------------------*/
static void prvDisplayAssertion( const char * pcFile, unsigned long ulLine )
{
extern void vMilliSecondDelay( uint32_t DelayTime );
const uint32_t ul500ms = 500UL;
/* Display assertion file and line. Don't use the gated g_printf just in
the assert was triggered while the gating semaphore was taken. Always print
on line 23. */
UngatedMoveToScreenPosition( 23, 2 );
printf( ANSI_COLOR_RED );
printf( "ASSERT: File = %s, Line = %u\n\r", pcFile, ulLine );
printf( ANSI_COLOR_RESET );
printf( ANSI_SHOW_CURSOR );
vMilliSecondDelay( ul500ms );
}
/*-----------------------------------------------------------*/
static void prvClearAssertionLine( void )
{
UngatedMoveToScreenPosition( 23, 1 );
printf( ANSI_COLOR_RESET );
printf( ANSI_CLEAR_LINE );
printf( ANSI_HIDE_CURSOR );
}
/*-----------------------------------------------------------*/
void vAssertCalled( const char * pcFile, unsigned long ulLine )
{
volatile uint32_t ul = 0;
( void ) pcFile;
( void ) ulLine;
taskENTER_CRITICAL();
{
/* Set ul to a non-zero value or press a key to step out of this
function in order to inspect the location of the assert(). */
/* Clear any pending key presses. */
while( ucGalileoGetchar() != 0 )
{
/* Nothing to do here - the key press is just discarded. */
}
do
{
prvDisplayAssertion(pcFile, ulLine);
} while ( ( ul == pdFALSE ) && ( ucGalileoGetchar() == 0 ) );
prvClearAssertionLine();
}
taskEXIT_CRITICAL();
}
/*-----------------------------------------------------------*/
void vApplicationTickHook( void )
{
#if( mainCREATE_SIMPLE_BLINKY_DEMO_ONLY == 0 )
{
extern void vTimerPeriodicISRTests( void );
/* The full demo includes a software timer demo/test that requires
prodding periodically from the tick interrupt. */
vTimerPeriodicISRTests();
/* Call the periodic queue overwrite from ISR demo. */
vQueueOverwritePeriodicISRDemo();
/* Call the periodic event group from ISR demo. */
vPeriodicEventGroupsProcessing();
/* Call the periodic queue set from ISR demo. */
vQueueSetAccessQueueSetFromISR();
/* Use task notifications from an interrupt. */
xNotifyTaskFromISR();
}
#endif
}
/*-----------------------------------------------------------*/
static void prvSetupHardware( void )
{
/* Initialise the serial port and GPIO. */
vInitializeGalileoSerialPort( DEBUG_SERIAL_PORT );
vGalileoInitializeGpioController();
vGalileoInitializeLegacyGPIO();
/* Initialise HPET interrupt(s) */
#if( ( mainCREATE_SIMPLE_BLINKY_DEMO_ONLY != 1 ) && ( hpetHPET_TIMER_IN_USE != 0 ) )
{
portDISABLE_INTERRUPTS();
vInitializeAllHPETInterrupts();
}
#endif
/* Setup the LED. */
vGalileoLegacyGPIOInitializationForLED();
/* Demonstrates how to calibrate LAPIC Timer. The calibration value
calculated here may get overwritten when the scheduler starts. */
prvCalibrateLVTimer();
/* Print RTOS loaded message. */
vPrintBanner();
}
/*-----------------------------------------------------------*/
static void prvLoopToWaitForDebugConnection( void )
{
/* Debug if define = 1. */
#if( mainWAIT_FOR_DEBUG_CONNECTION == 1 )
{
/* When using the debugger, set this value to pdFALSE, and the application
will sit in a loop at the top of main() to allow the debugger to attached
before the application starts running. Once attached, set
ulExitResetSpinLoop to a non-zero value to leave the loop. */
volatile uint32_t ulExitResetSpinLoop = pdFALSE;
/* Must initialize UART before anything will print. */
vInitializeGalileoSerialPort( DEBUG_SERIAL_PORT );
/* RTOS loaded message. */
vPrintBanner();
/* Output instruction message. */
MoveToScreenPosition( 3, 1 );
g_printf( DEFAULT_SCREEN_COLOR );
g_printf( " Waiting for JTAG connection.\n\n\r" );
g_printf( ANSI_COLOR_RESET );
g_printf( " Once connected, either set ulExitResetSpinLoop to a non-zero value,\n\r" );
g_printf( " or you can [PRESS ANY KEY] to start the debug session.\n\n\r" );
printf( ANSI_SHOW_CURSOR );
/* Use the debugger to set the ulExitResetSpinLoop to a non-zero value
or press a key to exit this loop, and step through the application. In
Eclipse, simple hover over the variable to see its value in a pop-over
box, then edit the value in the pop-over box. */
do
{
portNOP();
} while( ( ulExitResetSpinLoop == pdFALSE ) && ( ucGalileoGetchar() == 0 ) );
}
#endif
}
/*-----------------------------------------------------------*/
void CRT_Init( void )
{
extern uint32_t __bss_start[];
extern uint32_t __bss_end[];
extern uint32_t __data_vma[];
extern uint32_t __data_lma[];
extern uint32_t __data_start[];
extern uint32_t __data_end[];
uint32_t x = 255;
size_t xSize;
/* Zero out bss. */
xSize = ( ( size_t ) __bss_end ) - ( ( size_t ) __bss_start );
memset( ( void * ) __bss_start, 0x00, xSize );
/* Copy initialised variables. */
xSize = ( ( size_t ) __data_end ) - ( ( size_t ) __data_start );
memcpy( ( void * ) __data_vma, __data_lma, xSize );
/* Ensure no interrupts are pending. */
do
{
portAPIC_EOI = 0;
x--;
} while( x > 0 );
}
/*-----------------------------------------------------------*/
static void prvCalibrateLVTimer( void )
{
uint32_t uiInitialTimerCounts, uiCalibratedTimerCounts;
/* Disable LAPIC Counter. */
portAPIC_LVT_TIMER = portAPIC_DISABLE;
/* Calibrate the LV Timer counts to ensure it matches the HPET timer over
extended periods. */
uiInitialTimerCounts = ( ( configCPU_CLOCK_HZ >> 4UL ) / configTICK_RATE_HZ );
uiCalibratedTimerCounts = uiCalibrateTimer( 0, hpetLVTIMER );
if( uiCalibratedTimerCounts != 0 )
{
uiInitialTimerCounts = uiCalibratedTimerCounts;
}
/* Set the interrupt frequency. */
portAPIC_TMRDIV = portAPIC_DIV_16;
portAPIC_TIMER_INITIAL_COUNT = uiInitialTimerCounts;
/* Enable LAPIC Counter. */
portAPIC_LVT_TIMER = portAPIC_TIMER_PERIODIC | portAPIC_TIMER_INT_VECTOR;
/* Sometimes needed. */
portAPIC_TMRDIV = portAPIC_DIV_16;
}