# THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU */ | |
# MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR */ | |
# ELIGIBILITY FOR ANY PURPOSES. */ | |
# (C) Fujitsu Microelectronics Europe GmbH */ | |
# Environment and memory manioulation after program upload | |
# Settings | |
SET VARIABLE abortIRQ0 = 0x1 | |
SET VARIABLE intVectorMonitorDebugger = 0xFFC00 | |
# Disable all Interrupts | |
SET REGISTER I = 0x0 | |
# Set Table Base Register | |
SET REGISTER TBR = intVectorMonitorDebugger | |
# Run to smd_tbr and save TBR of Application | |
go ,Start91460\smd_tbr | |
SET VARIABLE intVectorApllication = %r0 | |
SET REGISTER TBR = intVectorApllication | |
# Copy required vector table entries of monitor debugger in vector table of application | |
MOVE intVectorMonitorDebugger + 0x3C0..intVectorMonitorDebugger + 0x3FF, intVectorApllication + 0x3C0 | |
# Prepare Entries for INT0 | |
IF %abortIRQ0 == 0x1 | |
MOVE intVectorMonitorDebugger + 0x3C0..intVectorMonitorDebugger + 0x3C3, intVectorApllication + 0x3BC | |
SET MEMORY/BYTE 0x32 = 0x3 | |
SET MEMORY/BYTE 0x30 = 0x0 | |
SET MEMORY/BYTE 0x31 = 0x1 | |
SET MEMORY/BYTE 0x440 = 0x10 | |
SET REGISTER ILM = 0x1E | |
ENDIF | |
# Setting indicates software reset, which leads to that the clock settings are not changed. | |
SET REGISTER R4 = 0x8 | |
# Set TBR to Vector table of application | |
SET REGISTER TBR = intVectorApllication | |
# Run to smd_c and let the CS enabled | |
go noClockStartup,Start91460\smd_cs | |
set register r2 = %r2|0x2 | |
# Run to main() | |
go ,main |