blob: 6cdf2dbe4d8a7fbc08d930de7d02e9d5f9e66712 [file] [log] [blame]
/*
* FreeRTOS Kernel V10.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H
/*
* 78K0R Clock Source Configuration
* 1 = use internal High Speed Clock Source (typically 8Mhz on the 78K0R/Kx3)
* 0 = use external Clock Source
*/
#define configCLOCK_SOURCE 0
/*
* 78K0R Memory Model
* 1 = use far memory mode
* 0 = use near memory mode
*
* This setting must match the setting in the IAR project options.
*/
#define configMEMORY_MODE 1
/*
* Application specific definitions.
*
* These definitions should be adjusted for your particular hardware and
* application requirements.
*
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
*/
#define configUSE_PREEMPTION 1
/* Only use following section for C files */
#ifdef __IAR_SYSTEMS_ICC__
#pragma language=extended
#pragma system_include
#include <intrinsics.h>
#define configUSE_IDLE_HOOK 0
#define configUSE_TICK_HOOK 0
#define configTICK_RATE_HZ ( ( TickType_t ) 1000 )
#define configMAX_PRIORITIES ( 4 )
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 100 )
#define configMAX_TASK_NAME_LEN ( 10 )
#define configUSE_TRACE_FACILITY 0
#define configUSE_16_BIT_TICKS 1
#define configIDLE_SHOULD_YIELD 1
#define configCHECK_FOR_STACK_OVERFLOW 2
#define configUSE_MUTEXES 1
/* Co-routine definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskCleanUpResources 0
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#if configCLOCK_SOURCE == 0
#define configCPU_CLOCK_HZ ( ( unsigned long ) 20000000 ) /* using the external clock source */
#else
#define configCPU_CLOCK_HZ ( ( unsigned long ) 8000000 ) /* using the internal high speed clock */
#endif /* configCLOCK_SOURCE */
/* Definitions that are specific to the project being used. */
#ifdef __IAR_78K0R_Kx3__
/* Device specific includes. */
#include <io78f1166_a0.h>
#include <io78f1166_a0_ext.h>
#define configTOTAL_HEAP_SIZE ( (size_t ) ( 7000 ) )
#endif /* __IAR_78K0R_Kx3__ */
#ifdef __IAR_78K0R_Kx3L__
/* Device specific includes. */
#include <io78f1009_64.h>
#include <io78f1009_64_ext.h>
#define configTOTAL_HEAP_SIZE ( (size_t ) ( 2500 ) )
#endif /* _IAR_78K0R_Kx3L__ */
#endif /* __IAR_SYSTEMS_ICC__ */
#endif /* FREERTOS_CONFIG_H */