/*
 * FreeRTOS Kernel V10.3.0
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

#include "FreeRTOS.h"
#include "IntQueueTimer.h"
#include "IntQueue.h"

#define timerINTERRUPT3_FREQUENCY	( 2000UL )
#define timerINTERRUPT4_FREQUENCY	( 2001UL )

void vT3InterruptHandler( void );
void vT4InterruptHandler( void );

/* As these interrupts use the FreeRTOS interrupt entry point, the IPL settings
in the following prototypes have no effect.  The interrupt priorities are set
by the ConfigIntTimerX() library calls in vInitialiseTimerForIntQueueTest(). */
void __attribute__( (interrupt(IPL0AUTO), vector(_TIMER_3_VECTOR))) vT3InterruptWrapper( void );
void __attribute__( (interrupt(IPL0AUTO), vector(_TIMER_4_VECTOR))) vT4InterruptWrapper( void );

void vInitialiseTimerForIntQueueTest( void )
{
	/* Timer 1 is used for the tick interrupt, timer 2 is used for the high
	frequency interrupt test.  This file therefore uses timers 3 and 4. */

	T3CON = 0;
	TMR3 = 0;
	PR3 = ( unsigned short ) ( configPERIPHERAL_CLOCK_HZ / timerINTERRUPT3_FREQUENCY );

	/* Setup timer 3 interrupt priority to be above the kernel priority. */
	IPC3bits.T3IP = ( configMAX_SYSCALL_INTERRUPT_PRIORITY - 1 );

	/* Clear the interrupt as a starting condition. */
	IFS0bits.T3IF = 0;

	/* Enable the interrupt. */
	IEC0bits.T3IE = 1;

	/* Start the timer. */
	T3CONbits.TON = 1;


	/* Do the same for timer 4. */
	T4CON = 0;
	TMR4 = 0;
	PR4 = ( unsigned short ) ( configPERIPHERAL_CLOCK_HZ / timerINTERRUPT4_FREQUENCY );

	/* Setup timer 4 interrupt priority to be above the kernel priority. */
	IPC4bits.T4IP = configMAX_SYSCALL_INTERRUPT_PRIORITY;

	/* Clear the interrupt as a starting condition. */
	IFS0bits.T4IF = 0;

	/* Enable the interrupt. */
	IEC0bits.T4IE = 1;

	/* Start the timer. */
	T4CONbits.TON = 1;
}
/*-----------------------------------------------------------*/

void vT3InterruptHandler( void )
{
	IFS0CLR = _IFS0_T3IF_MASK;
	portEND_SWITCHING_ISR( xFirstTimerHandler() );
}
/*-----------------------------------------------------------*/

void vT4InterruptHandler( void )
{
	IFS0CLR = _IFS0_T4IF_MASK;
	portEND_SWITCHING_ISR( xSecondTimerHandler() );
}