/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

/*
 * Changes from V3.0.0
 *
 * Changes from V3.0.1
 */
#ifndef PORTMACRO_H
#define PORTMACRO_H

#if !defined( _SERIES ) || _SERIES != 18
    #error "WizC supports FreeRTOS on the Microchip PIC18-series only"
#endif

#if !defined( QUICKCALL ) || QUICKCALL != 1
    #error "QuickCall must be enabled (see ProjectOptions/Optimisations)"
#endif

#include <stddef.h>
#include <pic.h>

#define portCHAR          char
#define portFLOAT         float
#define portDOUBLE        portFLOAT
#define portLONG          long
#define portSHORT         short
#define portSTACK_TYPE    uint8_t
#define portBASE_TYPE     char

typedef portSTACK_TYPE   StackType_t;
typedef signed char      BaseType_t;
typedef unsigned char    UBaseType_t;


#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
    typedef uint16_t     TickType_t;
    #define portMAX_DELAY    ( TickType_t ) ( 0xFFFF )
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
    typedef uint32_t     TickType_t;
    #define portMAX_DELAY    ( TickType_t ) ( 0xFFFFFFFFUL )
#else
    #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
#endif

#define portBYTE_ALIGNMENT    1

/*-----------------------------------------------------------*/

/*
 * Constant used for context switch macro when we require the interrupt
 * enable state to be forced when the interrupted task is switched back in.
 */
#define portINTERRUPTS_FORCED           ( 0x01 )

/*
 * Constant used for context switch macro when we require the interrupt
 * enable state to be unchanged when the interrupted task is switched back in.
 */
#define portINTERRUPTS_UNCHANGED        ( 0x00 )

/* Initial interrupt enable state for newly created tasks.  This value is
 * used when a task switches in for the first time.
 */
#define portINTERRUPTS_INITIAL_STATE    ( portINTERRUPTS_FORCED )

/*
 * Macros to modify the global interrupt enable bit in INTCON.
 */
#define portDISABLE_INTERRUPTS() \
    do                           \
    {                            \
        bGIE = 0;                \
    } while( bGIE ) /* MicroChip recommends this check! */

#define portENABLE_INTERRUPTS() \
    do                          \
    {                           \
        bGIE = 1;               \
    } while( 0 )

/*-----------------------------------------------------------*/

/*
 * Critical section macros.
 */
extern uint8_t ucCriticalNesting;

#define portNO_CRITICAL_SECTION_NESTING    ( ( uint8_t ) 0 )

#define portENTER_CRITICAL()      \
    do                            \
    {                             \
        portDISABLE_INTERRUPTS(); \
                                  \
        /* \
         * Now interrupts are disabled ucCriticalNesting \
         * can be accessed directly. Increment \
         * ucCriticalNesting to keep a count of how \
         * many times portENTER_CRITICAL() has been called. \
         */                  \
        ucCriticalNesting++; \
    } while( 0 )

#define portEXIT_CRITICAL()                                       \
    do                                                            \
    {                                                             \
        if( ucCriticalNesting > portNO_CRITICAL_SECTION_NESTING ) \
        {                                                         \
            /* \
             * Decrement the nesting count as we are leaving a \
             * critical section. \
             */                  \
            ucCriticalNesting--; \
        }                        \
                                 \
        /* \
         * If the nesting level has reached zero then \
         * interrupts should be re-enabled. \
         */                                                        \
        if( ucCriticalNesting == portNO_CRITICAL_SECTION_NESTING ) \
        {                                                          \
            portENABLE_INTERRUPTS();                               \
        }                                                          \
    } while( 0 )

/*-----------------------------------------------------------*/

/*
 * The minimal stacksize is calculated on the first reference of
 * portMINIMAL_STACK_SIZE. Some input to this calculation is
 * compiletime determined, other input is port-defined (see port.c)
 */
extern uint16_t usPortCALCULATE_MINIMAL_STACK_SIZE( void );
extern uint16_t usCalcMinStackSize;

#define portMINIMAL_STACK_SIZE               \
    ( ( usCalcMinStackSize == 0 )            \
      ? usPortCALCULATE_MINIMAL_STACK_SIZE() \
      : usCalcMinStackSize )

/*
 * WizC uses a downgrowing stack
 */
#define portSTACK_GROWTH    ( -1 )

/*-----------------------------------------------------------*/

/*
 * Macro's that pushes all the registers that make up the context of a task onto
 * the stack, then saves the new top of stack into the TCB. TOSU and TBLPTRU
 * are only saved/restored on devices with more than 64kB (32k Words) ROM.
 *
 * The stackpointer is held by WizC in FSR2 and points to the first free byte.
 * WizC uses a "downgrowing" stack. There is no framepointer.
 *
 * We keep track of the interruptstatus using ucCriticalNesting. When this
 * value equals zero, interrupts have to be enabled upon exit from the
 * portRESTORE_CONTEXT macro.
 *
 * If this is called from an ISR then the interrupt enable bits must have been
 * set for the ISR to ever get called.  Therefore we want to save
 * ucCriticalNesting with value zero. This means the interrupts will again be
 * re-enabled when the interrupted task is switched back in.
 *
 * If this is called from a manual context switch (i.e. from a call to yield),
 * then we want to keep the current value of ucCriticalNesting so it is restored
 * with its current value. This allows a yield from within a critical section.
 *
 * The compiler uses some locations at the bottom of RAM for temporary
 * storage. The compiler may also have been instructed to optimize
 * function-parameters and local variables to global storage. The compiler
 * uses an area called LocOpt for this wizC feature.
 * The total overheadstorage has to be saved in it's entirety as part of
 * a task context. These macro's store/restore from data address 0x0000 to
 * (OVERHEADPAGE0-LOCOPTSIZE+MAXLOCOPTSIZE - 1).
 * OVERHEADPAGE0, LOCOPTSIZE and MAXLOCOPTSIZE are compiler-generated
 * assembler definitions.
 */

#define portSAVE_CONTEXT( ucInterruptForced )                   \
    do                                                          \
    {                                                           \
        portDISABLE_INTERRUPTS();                               \
                                                                \
        _Pragma("asm")                                          \
        ;                                                       \
        ; Push the relevant SFR's onto the task's stack         \
        ;                                                       \
        movff   STATUS,POSTDEC2                                 \
        movff   WREG,POSTDEC2                                   \
        movff   BSR,POSTDEC2                                    \
        movff   PRODH,POSTDEC2                                  \
        movff   PRODL,POSTDEC2                                  \
        movff   FSR0H,POSTDEC2                                  \
        movff   FSR0L,POSTDEC2                                  \
        movff   FSR1H,POSTDEC2                                  \
        movff   FSR1L,POSTDEC2                                  \
        movff   TABLAT,POSTDEC2                                 \
        if __ROMSIZE > 0x8000                                   \
        movff   TBLPTRU,POSTDEC2                                \
        endif                                                   \
        movff   TBLPTRH,POSTDEC2                                \
        movff   TBLPTRL,POSTDEC2                                \
        if __ROMSIZE > 0x8000                                   \
        movff   PCLATU,POSTDEC2                                 \
        endif                                                   \
        movff   PCLATH,POSTDEC2                                 \
        ;                                                       \
        ; Store the compiler-scratch-area as described above.   \
        ;                                                       \
        movlw   OVERHEADPAGE0-LOCOPTSIZE+MAXLOCOPTSIZE          \
        clrf    FSR0L,ACCESS                                    \
        clrf    FSR0H,ACCESS                                    \
        _rtos_S1:                                               \
        movff   POSTINC0,POSTDEC2                               \
        decfsz  WREG,W,ACCESS                                   \
        SMARTJUMP _rtos_S1                                      \
        ;                                                       \
        ; Save the pic call/return-stack belonging to the       \
        ; current task by copying it to the task's software-    \
        ; stack. We save the hardware stack pointer (which      \
        ; is the number of addresses on the stack) in the       \
        ; W-register first because we need it later and it      \
        ; is modified in the save-loop by executing pop's.      \
        ; After the loop the W-register is stored on the        \
        ; stack, too.                                           \
        ;                                                       \
        movf    STKPTR,W,ACCESS                                 \
        bz      _rtos_s3                                        \
        _rtos_S2:                                               \
        if __ROMSIZE > 0x8000                                   \
        movff   TOSU,POSTDEC2                                   \
        endif                                                   \
        movff   TOSH,POSTDEC2                                   \
        movff   TOSL,POSTDEC2                                   \
        pop                                                     \
        tstfsz  STKPTR,ACCESS                                   \
        SMARTJUMP _rtos_S2                                      \
        _rtos_s3:                                               \
        movwf   POSTDEC2,ACCESS                                 \
        ;                                                       \
        ; Next the value for ucCriticalNesting used by the      \
        ; task is stored on the stack. When                     \
        ; (ucInterruptForced == portINTERRUPTS_FORCED), we save \
        ; it as 0 (portNO_CRITICAL_SECTION_NESTING).            \
        ;                                                       \
        if ucInterruptForced == portINTERRUPTS_FORCED           \
        clrf POSTDEC2,ACCESS                                    \
        else                                                    \
        movff   ucCriticalNesting,POSTDEC2                      \
        endif                                                   \
        ;                                                       \
        ; Save the new top of the software stack in the TCB.    \
        ;                                                       \
        movff   pxCurrentTCB,FSR0L                              \
        movff   pxCurrentTCB+1,FSR0H                            \
        movff   FSR2L,POSTINC0                                  \
        movff   FSR2H,POSTINC0                                  \
        _Pragma("asmend")                                       \
        } while(0)

/************************************************************/

/*
 * This is the reverse of portSAVE_CONTEXT.
 */
#define portRESTORE_CONTEXT()                                   \
    do                                                          \
    {                                                           \
        _Pragma("asm")                                          \
        ;                                                       \
        ; Set FSR0 to point to pxCurrentTCB->pxTopOfStack.      \
        ;                                                       \
        movff   pxCurrentTCB,FSR0L                              \
        movff   pxCurrentTCB+1,FSR0H                            \
        ;                                                       \
        ; De-reference FSR0 to set the address it holds into    \
        ; FSR2 (i.e. *( pxCurrentTCB->pxTopOfStack ) ). FSR2    \
        ; is used by wizC as stackpointer.                      \
        ;                                                       \
        movff   POSTINC0,FSR2L                                  \
        movff   POSTINC0,FSR2H                                  \
        ;                                                       \
        ; Next, the value for ucCriticalNesting used by the     \
        ; task is retrieved from the stack.                     \
        ;                                                       \
        movff   PREINC2,ucCriticalNesting                       \
        ;                                                       \
        ; Rebuild the pic call/return-stack. The number of      \
        ; return addresses is the next item on the task stack.  \
        ; Save this number in PRODL. Then fetch the addresses   \
        ; and store them on the hardwarestack.                  \
        ; The datasheets say we can't use movff here...         \
        ;                                                       \
        movff   PREINC2,PRODL /* Use PRODL as tempregister */   \
        clrf    STKPTR,ACCESS                                   \
        _rtos_R1:                                               \
        push                                                    \
        movf    PREINC2,W,ACCESS                                \
        movwf   TOSL,ACCESS                                     \
        movf    PREINC2,W,ACCESS                                \
        movwf   TOSH,ACCESS                                     \
        if __ROMSIZE > 0x8000                                   \
        movf    PREINC2,W,ACCESS                                \
        movwf   TOSU,ACCESS                                     \
        else                                                    \
        clrf    TOSU,ACCESS                                     \
        endif                                                   \
        decfsz  PRODL,F,ACCESS                                  \
        SMARTJUMP _rtos_R1                                      \
        ;                                                       \
        ; Restore the compiler's working storage area to page 0 \
        ;                                                       \
        movlw   OVERHEADPAGE0-LOCOPTSIZE+MAXLOCOPTSIZE          \
        movwf   FSR0L,ACCESS                                    \
        clrf    FSR0H,ACCESS                                    \
        _rtos_R2:                                               \
        decf    FSR0L,F,ACCESS                                  \
        movff   PREINC2,INDF0                                   \
        tstfsz  FSR0L,ACCESS                                    \
        SMARTJUMP _rtos_R2                                      \
        ;                                                       \
        ; Restore the sfr's forming the tasks context.          \
        ; We cannot yet restore bsr, w and status because       \
        ; we need these registers for a final test.             \
        ;                                                       \
        movff   PREINC2,PCLATH                                  \
        if __ROMSIZE > 0x8000                                   \
        movff   PREINC2,PCLATU                                  \
        else                                                    \
        clrf    PCLATU,ACCESS                                   \
        endif                                                   \
        movff   PREINC2,TBLPTRL                                 \
        movff   PREINC2,TBLPTRH                                 \
        if __ROMSIZE > 0x8000                                   \
        movff   PREINC2,TBLPTRU                                 \
        else                                                    \
        clrf    TBLPTRU,ACCESS                                  \
        endif                                                   \
        movff   PREINC2,TABLAT                                  \
        movff   PREINC2,FSR1L                                   \
        movff   PREINC2,FSR1H                                   \
        movff   PREINC2,FSR0L                                   \
        movff   PREINC2,FSR0H                                   \
        movff   PREINC2,PRODL                                   \
        movff   PREINC2,PRODH                                   \
        ;                                                       \
        ; The return from portRESTORE_CONTEXT() depends on      \
        ; the value of ucCriticalNesting. When it is zero,      \
        ; interrupts need to be enabled. This is done via a     \
        ; retfie instruction because we need the                \
        ; interrupt-enabling and the return to the restored     \
        ; task to be uninterruptible.                           \
        ; Because bsr, status and W are affected by the test    \
        ; they are restored after the test.                     \
        ;                                                       \
        movlb   ucCriticalNesting>>8                            \
        tstfsz  ucCriticalNesting,BANKED                        \
        SMARTJUMP _rtos_R4                                      \
        _rtos_R3:                                               \
        movff   PREINC2,BSR                                     \
        movff   PREINC2,WREG                                    \
        movff   PREINC2,STATUS                                  \
        retfie  0       ; Return enabling interrupts            \
        _rtos_R4:                                               \
        movff   PREINC2,BSR                                     \
        movff   PREINC2,WREG                                    \
        movff   PREINC2,STATUS                                  \
        return  0       ; Return without affecting interrupts   \
        _Pragma("asmend")                                       \
        } while(0)

/*-----------------------------------------------------------*/

#define portTICK_PERIOD_MS    ( ( TickType_t ) 1000 / configTICK_RATE_HZ )

/*-----------------------------------------------------------*/

extern void vPortYield( void );
#define portYIELD()    vPortYield()

#define portNOP()  \
    _Pragma("asm") \
    nop            \
    _Pragma("asmend")

/*-----------------------------------------------------------*/

#define portTASK_FUNCTION( xFunction, pvParameters ) \
    void pointed xFunction( void * pvParameters )    \
    _Pragma(asmfunc xFunction)

#define portTASK_FUNCTION_PROTO    portTASK_FUNCTION
/*-----------------------------------------------------------*/


#define volatile
#define register

#endif /* PORTMACRO_H */