/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */


#ifndef PORTMACRO_H
#define PORTMACRO_H

/* *INDENT-OFF* */
#ifdef __cplusplus
    extern "C" {
#endif
/* *INDENT-ON* */

/*-----------------------------------------------------------
 * Port specific definitions.
 *
 * The settings in this file configure FreeRTOS correctly for the
 * given hardware and compiler.
 *
 * These settings should not be altered.
 *-----------------------------------------------------------
 */

/* When the FIT configurator or the Smart Configurator is used, platform.h has to be
 * used. */
#ifndef configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H
    #define configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H    0
#endif

/* Type definitions - these are a bit legacy and not really used now, other than
 * portSTACK_TYPE and portBASE_TYPE. */
#define portCHAR          char
#define portFLOAT         float
#define portDOUBLE        double
#define portLONG          long
#define portSHORT         short
#define portSTACK_TYPE    uint32_t
#define portBASE_TYPE     long

typedef portSTACK_TYPE   StackType_t;
typedef long             BaseType_t;
typedef unsigned long    UBaseType_t;

#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
    typedef uint16_t     TickType_t;
    #define portMAX_DELAY              ( TickType_t ) 0xffff
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
    typedef uint32_t     TickType_t;
    #define portMAX_DELAY              ( TickType_t ) 0xffffffffUL

/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
 * not need to be guarded with a critical section. */
    #define portTICK_TYPE_IS_ATOMIC    1
#else
    #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
#endif
/*-----------------------------------------------------------*/

/* Hardware specifics. */
#define portBYTE_ALIGNMENT    8         /* Could make four, according to manual. */
#define portSTACK_GROWTH      -1
#define portTICK_PERIOD_MS    ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portNOP()    __asm volatile ( "NOP" )

/* Yield equivalent to "*portITU_SWINTR = 0x01; ( void ) *portITU_SWINTR;"
 * where portITU_SWINTR is the location of the software interrupt register
 * (0x000872E0).  Don't rely on the assembler to select a register, so instead
 * save and restore clobbered registers manually. */
#define portYIELD()                     \
    __asm volatile                      \
    (                                   \
        "PUSH.L R10                 \n" \
        "MOV.L  #0x872E0, R10       \n" \
        "MOV.B  #0x1, [R10]         \n" \
        "MOV.L  [R10], R10          \n" \
        "POP    R10                 \n" \
    )

#define portYIELD_FROM_ISR( x )                           do { if( x != pdFALSE ) portYIELD( ); } while( 0 )

/* These macros should not be called directly, but through the
 * taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros.  An extra check is
 * performed if configASSERT() is defined to ensure an assertion handler does not
 * inadvertently attempt to lower the IPL when the call to assert was triggered
 * because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
 * when an ISR safe FreeRTOS API function was executed.  ISR safe FreeRTOS API
 * functions are those that end in FromISR.  FreeRTOS maintains a separate
 * interrupt API to ensure API function and interrupt entry is as fast and as
 * simple as possible. */
#define portENABLE_INTERRUPTS()                           __asm volatile ( "MVTIPL    #0" )
#ifdef configASSERT
    #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID()    configASSERT( ( ulPortGetIPL() <= configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
    #define portDISABLE_INTERRUPTS()                      if( ulPortGetIPL() < configMAX_SYSCALL_INTERRUPT_PRIORITY ) __asm volatile( "MVTIPL    %0" ::"i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
#else
    #define portDISABLE_INTERRUPTS()                      __asm volatile ( "MVTIPL    %0" ::"i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
#endif

/* Critical nesting counts are stored in the TCB. */
#define portCRITICAL_NESTING_IN_TCB    ( 1 )

/* The critical nesting functions defined within tasks.c. */
extern void vTaskEnterCritical( void );
extern void vTaskExitCritical( void );
#define portENTER_CRITICAL()    vTaskEnterCritical()
#define portEXIT_CRITICAL()     vTaskExitCritical()

/* As this port allows interrupt nesting... */
uint32_t ulPortGetIPL( void ) __attribute__( ( naked ) );
void vPortSetIPL( uint32_t ulNewIPL ) __attribute__( ( naked ) );
#define portSET_INTERRUPT_MASK_FROM_ISR()                              ulPortGetIPL(); portDISABLE_INTERRUPTS()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus )    vPortSetIPL( uxSavedInterruptStatus )

/*-----------------------------------------------------------*/

/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters )    void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters )          void vFunction( void * pvParameters )

#define portMEMORY_BARRIER()                                  __asm volatile ( "" ::: "memory" )

/* *INDENT-OFF* */
#ifdef __cplusplus
    }
#endif
/* *INDENT-ON* */

#endif /* PORTMACRO_H */