blob: 63d1d94f742c97169ebaf00132ee0cdbb8750ee8 [file] [log] [blame]
/*
* FreeRTOS Kernel <DEVELOPMENT BRANCH>
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef CO_ROUTINE_H
#define CO_ROUTINE_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include croutine.h"
#endif
#include "list.h"
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/* Used to hide the implementation of the co-routine control block. The
* control block structure however has to be included in the header due to
* the macro implementation of the co-routine functionality. */
typedef void * CoRoutineHandle_t;
/* Defines the prototype to which co-routine functions must conform. */
typedef void (* crCOROUTINE_CODE)( CoRoutineHandle_t,
UBaseType_t );
typedef struct corCoRoutineControlBlock
{
crCOROUTINE_CODE pxCoRoutineFunction;
ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */
UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
uint16_t uxState; /*< Used internally by the co-routine implementation. */
} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
/**
* croutine. h
* @code{c}
* BaseType_t xCoRoutineCreate(
* crCOROUTINE_CODE pxCoRoutineCode,
* UBaseType_t uxPriority,
* UBaseType_t uxIndex
* );
* @endcode
*
* Create a new co-routine and add it to the list of co-routines that are
* ready to run.
*
* @param pxCoRoutineCode Pointer to the co-routine function. Co-routine
* functions require special syntax - see the co-routine section of the WEB
* documentation for more information.
*
* @param uxPriority The priority with respect to other co-routines at which
* the co-routine will run.
*
* @param uxIndex Used to distinguish between different co-routines that
* execute the same function. See the example below and the co-routine section
* of the WEB documentation for further information.
*
* @return pdPASS if the co-routine was successfully created and added to a ready
* list, otherwise an error code defined with ProjDefs.h.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* // This may not be necessary for const variables.
* static const char cLedToFlash[ 2 ] = { 5, 6 };
* static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // This co-routine just delays for a fixed period, then toggles
* // an LED. Two co-routines are created using this function, so
* // the uxIndex parameter is used to tell the co-routine which
* // LED to flash and how int32_t to delay. This assumes xQueue has
* // already been created.
* vParTestToggleLED( cLedToFlash[ uxIndex ] );
* crDELAY( xHandle, uxFlashRates[ uxIndex ] );
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
*
* // Function that creates two co-routines.
* void vOtherFunction( void )
* {
* uint8_t ucParameterToPass;
* TaskHandle_t xHandle;
*
* // Create two co-routines at priority 0. The first is given index 0
* // so (from the code above) toggles LED 5 every 200 ticks. The second
* // is given index 1 so toggles LED 6 every 400 ticks.
* for( uxIndex = 0; uxIndex < 2; uxIndex++ )
* {
* xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
* }
* }
* @endcode
* \defgroup xCoRoutineCreate xCoRoutineCreate
* \ingroup Tasks
*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex );
/**
* croutine. h
* @code{c}
* void vCoRoutineSchedule( void );
* @endcode
*
* Run a co-routine.
*
* vCoRoutineSchedule() executes the highest priority co-routine that is able
* to run. The co-routine will execute until it either blocks, yields or is
* preempted by a task. Co-routines execute cooperatively so one
* co-routine cannot be preempted by another, but can be preempted by a task.
*
* If an application comprises of both tasks and co-routines then
* vCoRoutineSchedule should be called from the idle task (in an idle task
* hook).
*
* Example usage:
* @code{c}
* // This idle task hook will schedule a co-routine each time it is called.
* // The rest of the idle task will execute between co-routine calls.
* void vApplicationIdleHook( void )
* {
* vCoRoutineSchedule();
* }
*
* // Alternatively, if you do not require any other part of the idle task to
* // execute, the idle task hook can call vCoRoutineSchedule() within an
* // infinite loop.
* void vApplicationIdleHook( void )
* {
* for( ;; )
* {
* vCoRoutineSchedule();
* }
* }
* @endcode
* \defgroup vCoRoutineSchedule vCoRoutineSchedule
* \ingroup Tasks
*/
void vCoRoutineSchedule( void );
/**
* croutine. h
* @code{c}
* crSTART( CoRoutineHandle_t xHandle );
* @endcode
*
* This macro MUST always be called at the start of a co-routine function.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static int32_t ulAVariable;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Co-routine functionality goes here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* @endcode
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crSTART( pxCRCB ) \
switch( ( ( CRCB_t * ) ( pxCRCB ) )->uxState ) { \
case 0:
/**
* croutine. h
* @code{c}
* crEND();
* @endcode
*
* This macro MUST always be called at the end of a co-routine function.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static int32_t ulAVariable;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Co-routine functionality goes here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* @endcode
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crEND() }
/*
* These macros are intended for internal use by the co-routine implementation
* only. The macros should not be used directly by application writers.
*/
#define crSET_STATE0( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( __LINE__ * 2 ); return; \
case ( __LINE__ * 2 ):
#define crSET_STATE1( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( ( __LINE__ * 2 ) + 1 ); return; \
case ( ( __LINE__ * 2 ) + 1 ):
/**
* croutine. h
* @code{c}
* crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );
* @endcode
*
* Delay a co-routine for a fixed period of time.
*
* crDELAY can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* @param xHandle The handle of the co-routine to delay. This is the xHandle
* parameter of the co-routine function.
*
* @param xTickToDelay The number of ticks that the co-routine should delay
* for. The actual amount of time this equates to is defined by
* configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_PERIOD_MS
* can be used to convert ticks to milliseconds.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* // This may not be necessary for const variables.
* // We are to delay for 200ms.
* static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Delay for 200ms.
* crDELAY( xHandle, xDelayTime );
*
* // Do something here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* @endcode
* \defgroup crDELAY crDELAY
* \ingroup Tasks
*/
#define crDELAY( xHandle, xTicksToDelay ) \
if( ( xTicksToDelay ) > 0 ) \
{ \
vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \
} \
crSET_STATE0( ( xHandle ) );
/**
* @code{c}
* crQUEUE_SEND(
* CoRoutineHandle_t xHandle,
* QueueHandle_t pxQueue,
* void *pvItemToQueue,
* TickType_t xTicksToWait,
* BaseType_t *pxResult
* )
* @endcode
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
*
* crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
* xQueueSend() and xQueueReceive() can only be used from tasks.
*
* crQUEUE_SEND can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xHandle The handle of the calling co-routine. This is the xHandle
* parameter of the co-routine function.
*
* @param pxQueue The handle of the queue on which the data will be posted.
* The handle is obtained as the return value when the queue is created using
* the xQueueCreate() API function.
*
* @param pvItemToQueue A pointer to the data being posted onto the queue.
* The number of bytes of each queued item is specified when the queue is
* created. This number of bytes is copied from pvItemToQueue into the queue
* itself.
*
* @param xTickToDelay The number of ticks that the co-routine should block
* to wait for space to become available on the queue, should space not be
* available immediately. The actual amount of time this equates to is defined
* by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
* portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see example
* below).
*
* @param pxResult The variable pointed to by pxResult will be set to pdPASS if
* data was successfully posted onto the queue, otherwise it will be set to an
* error defined within ProjDefs.h.
*
* Example usage:
* @code{c}
* // Co-routine function that blocks for a fixed period then posts a number onto
* // a queue.
* static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static BaseType_t xNumberToPost = 0;
* static BaseType_t xResult;
*
* // Co-routines must begin with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // This assumes the queue has already been created.
* crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
*
* if( xResult != pdPASS )
* {
* // The message was not posted!
* }
*
* // Increment the number to be posted onto the queue.
* xNumberToPost++;
*
* // Delay for 100 ticks.
* crDELAY( xHandle, 100 );
* }
*
* // Co-routines must end with a call to crEND().
* crEND();
* }
* @endcode
* \defgroup crQUEUE_SEND crQUEUE_SEND
* \ingroup Tasks
*/
#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \
} \
if( *pxResult == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*pxResult = pdPASS; \
} \
}
/**
* croutine. h
* @code{c}
* crQUEUE_RECEIVE(
* CoRoutineHandle_t xHandle,
* QueueHandle_t pxQueue,
* void *pvBuffer,
* TickType_t xTicksToWait,
* BaseType_t *pxResult
* )
* @endcode
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
*
* crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
* xQueueSend() and xQueueReceive() can only be used from tasks.
*
* crQUEUE_RECEIVE can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xHandle The handle of the calling co-routine. This is the xHandle
* parameter of the co-routine function.
*
* @param pxQueue The handle of the queue from which the data will be received.
* The handle is obtained as the return value when the queue is created using
* the xQueueCreate() API function.
*
* @param pvBuffer The buffer into which the received item is to be copied.
* The number of bytes of each queued item is specified when the queue is
* created. This number of bytes is copied into pvBuffer.
*
* @param xTickToDelay The number of ticks that the co-routine should block
* to wait for data to become available from the queue, should data not be
* available immediately. The actual amount of time this equates to is defined
* by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
* portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see the
* crQUEUE_SEND example).
*
* @param pxResult The variable pointed to by pxResult will be set to pdPASS if
* data was successfully retrieved from the queue, otherwise it will be set to
* an error code as defined within ProjDefs.h.
*
* Example usage:
* @code{c}
* // A co-routine receives the number of an LED to flash from a queue. It
* // blocks on the queue until the number is received.
* static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static BaseType_t xResult;
* static UBaseType_t uxLEDToFlash;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Wait for data to become available on the queue.
* crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
*
* if( xResult == pdPASS )
* {
* // We received the LED to flash - flash it!
* vParTestToggleLED( uxLEDToFlash );
* }
* }
*
* crEND();
* }
* @endcode
* \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRReceive( ( pxQueue ), ( pvBuffer ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*( pxResult ) = xQueueCRReceive( ( pxQueue ), ( pvBuffer ), 0 ); \
} \
if( *( pxResult ) == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*( pxResult ) = pdPASS; \
} \
}
/**
* croutine. h
* @code{c}
* crQUEUE_SEND_FROM_ISR(
* QueueHandle_t pxQueue,
* void *pvItemToQueue,
* BaseType_t xCoRoutinePreviouslyWoken
* )
* @endcode
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
* functions used by tasks.
*
* crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
* pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
* xQueueReceiveFromISR() can only be used to pass data between a task and and
* ISR.
*
* crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue
* that is being used from within a co-routine.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xQueue The handle to the queue on which the item is to be posted.
*
* @param pvItemToQueue A pointer to the item that is to be placed on the
* queue. The size of the items the queue will hold was defined when the
* queue was created, so this many bytes will be copied from pvItemToQueue
* into the queue storage area.
*
* @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto
* the same queue multiple times from a single interrupt. The first call
* should always pass in pdFALSE. Subsequent calls should pass in
* the value returned from the previous call.
*
* @return pdTRUE if a co-routine was woken by posting onto the queue. This is
* used by the ISR to determine if a context switch may be required following
* the ISR.
*
* Example usage:
* @code{c}
* // A co-routine that blocks on a queue waiting for characters to be received.
* static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* char cRxedChar;
* BaseType_t xResult;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Wait for data to become available on the queue. This assumes the
* // queue xCommsRxQueue has already been created!
* crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
*
* // Was a character received?
* if( xResult == pdPASS )
* {
* // Process the character here.
* }
* }
*
* // All co-routines must end with a call to crEND().
* crEND();
* }
*
* // An ISR that uses a queue to send characters received on a serial port to
* // a co-routine.
* void vUART_ISR( void )
* {
* char cRxedChar;
* BaseType_t xCRWokenByPost = pdFALSE;
*
* // We loop around reading characters until there are none left in the UART.
* while( UART_RX_REG_NOT_EMPTY() )
* {
* // Obtain the character from the UART.
* cRxedChar = UART_RX_REG;
*
* // Post the character onto a queue. xCRWokenByPost will be pdFALSE
* // the first time around the loop. If the post causes a co-routine
* // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
* // In this manner we can ensure that if more than one co-routine is
* // blocked on the queue only one is woken by this ISR no matter how
* // many characters are posted to the queue.
* xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
* }
* }
* @endcode
* \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) \
xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
/**
* croutine. h
* @code{c}
* crQUEUE_SEND_FROM_ISR(
* QueueHandle_t pxQueue,
* void *pvBuffer,
* BaseType_t * pxCoRoutineWoken
* )
* @endcode
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
* functions used by tasks.
*
* crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
* pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
* xQueueReceiveFromISR() can only be used to pass data between a task and and
* ISR.
*
* crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data
* from a queue that is being used from within a co-routine (a co-routine
* posted to the queue).
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xQueue The handle to the queue on which the item is to be posted.
*
* @param pvBuffer A pointer to a buffer into which the received item will be
* placed. The size of the items the queue will hold was defined when the
* queue was created, so this many bytes will be copied from the queue into
* pvBuffer.
*
* @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become
* available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a
* co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise
* *pxCoRoutineWoken will remain unchanged.
*
* @return pdTRUE an item was successfully received from the queue, otherwise
* pdFALSE.
*
* Example usage:
* @code{c}
* // A co-routine that posts a character to a queue then blocks for a fixed
* // period. The character is incremented each time.
* static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // cChar holds its value while this co-routine is blocked and must therefore
* // be declared static.
* static char cCharToTx = 'a';
* BaseType_t xResult;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Send the next character to the queue.
* crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
*
* if( xResult == pdPASS )
* {
* // The character was successfully posted to the queue.
* }
* else
* {
* // Could not post the character to the queue.
* }
*
* // Enable the UART Tx interrupt to cause an interrupt in this
* // hypothetical UART. The interrupt will obtain the character
* // from the queue and send it.
* ENABLE_RX_INTERRUPT();
*
* // Increment to the next character then block for a fixed period.
* // cCharToTx will maintain its value across the delay as it is
* // declared static.
* cCharToTx++;
* if( cCharToTx > 'x' )
* {
* cCharToTx = 'a';
* }
* crDELAY( 100 );
* }
*
* // All co-routines must end with a call to crEND().
* crEND();
* }
*
* // An ISR that uses a queue to receive characters to send on a UART.
* void vUART_ISR( void )
* {
* char cCharToTx;
* BaseType_t xCRWokenByPost = pdFALSE;
*
* while( UART_TX_REG_EMPTY() )
* {
* // Are there any characters in the queue waiting to be sent?
* // xCRWokenByPost will automatically be set to pdTRUE if a co-routine
* // is woken by the post - ensuring that only a single co-routine is
* // woken no matter how many times we go around this loop.
* if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
* {
* SEND_CHARACTER( cCharToTx );
* }
* }
* }
* @endcode
* \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) \
xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
/*
* This function is intended for internal use by the co-routine macros only.
* The macro nature of the co-routine implementation requires that the
* prototype appears here. The function should not be used by application
* writers.
*
* Removes the current co-routine from its ready list and places it in the
* appropriate delayed list.
*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay,
List_t * pxEventList );
/*
* This function is intended for internal use by the queue implementation only.
* The function should not be used by application writers.
*
* Removes the highest priority co-routine from the event list and places it in
* the pending ready list.
*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t * pxEventList );
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* CO_ROUTINE_H */