blob: f9d39f9d0e0c26086a1681f2dc5361aa67432a63 [file] [log] [blame]
/*
* FreeRTOS Kernel <DEVELOPMENT BRANCH>
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
/*------------------------------------------------------------------------------
* Port specific definitions.
*
* The settings in this file configure FreeRTOS correctly for the given hardware
* and compiler.
*
* These settings should not be altered.
*------------------------------------------------------------------------------
*/
#ifndef configENABLE_FPU
#error configENABLE_FPU must be defined in FreeRTOSConfig.h. Set configENABLE_FPU to 1 to enable the FPU or 0 to disable the FPU.
#endif /* configENABLE_FPU */
#ifndef configENABLE_MPU
#error configENABLE_MPU must be defined in FreeRTOSConfig.h. Set configENABLE_MPU to 1 to enable the MPU or 0 to disable the MPU.
#endif /* configENABLE_MPU */
#ifndef configENABLE_TRUSTZONE
#error configENABLE_TRUSTZONE must be defined in FreeRTOSConfig.h. Set configENABLE_TRUSTZONE to 1 to enable TrustZone or 0 to disable TrustZone.
#endif /* configENABLE_TRUSTZONE */
/*-----------------------------------------------------------*/
/**
* @brief Type definitions.
*/
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
#endif
/*-----------------------------------------------------------*/
/**
* Architecture specifics.
*/
#define portARCH_NAME "Cortex-M23"
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP()
#define portINLINE __inline
#ifndef portFORCE_INLINE
#define portFORCE_INLINE inline __attribute__( ( always_inline ) )
#endif
#define portHAS_STACK_OVERFLOW_CHECKING 1
#define portDONT_DISCARD __root
/*-----------------------------------------------------------*/
/**
* @brief Extern declarations.
*/
extern BaseType_t xPortIsInsideInterrupt( void );
extern void vPortYield( void ) /* PRIVILEGED_FUNCTION */;
extern void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */;
extern void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */;
extern uint32_t ulSetInterruptMask( void ) /* __attribute__(( naked )) PRIVILEGED_FUNCTION */;
extern void vClearInterruptMask( uint32_t ulMask ) /* __attribute__(( naked )) PRIVILEGED_FUNCTION */;
#if ( configENABLE_TRUSTZONE == 1 )
extern void vPortAllocateSecureContext( uint32_t ulSecureStackSize ); /* __attribute__ (( naked )) */
extern void vPortFreeSecureContext( uint32_t * pulTCB ) /* __attribute__ (( naked )) PRIVILEGED_FUNCTION */;
#endif /* configENABLE_TRUSTZONE */
#if ( configENABLE_MPU == 1 )
extern BaseType_t xIsPrivileged( void ) /* __attribute__ (( naked )) */;
extern void vResetPrivilege( void ) /* __attribute__ (( naked )) */;
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
/**
* @brief MPU specific constants.
*/
#if ( configENABLE_MPU == 1 )
#define portUSING_MPU_WRAPPERS 1
#define portPRIVILEGE_BIT ( 0x80000000UL )
#else
#define portPRIVILEGE_BIT ( 0x0UL )
#endif /* configENABLE_MPU */
/* MPU regions. */
#define portPRIVILEGED_FLASH_REGION ( 0UL )
#define portUNPRIVILEGED_FLASH_REGION ( 1UL )
#define portUNPRIVILEGED_SYSCALLS_REGION ( 2UL )
#define portPRIVILEGED_RAM_REGION ( 3UL )
#define portSTACK_REGION ( 4UL )
#define portFIRST_CONFIGURABLE_REGION ( 5UL )
#define portLAST_CONFIGURABLE_REGION ( 7UL )
#define portNUM_CONFIGURABLE_REGIONS ( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 )
#define portTOTAL_NUM_REGIONS ( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus one to make space for the stack region. */
/* Device memory attributes used in MPU_MAIR registers.
*
* 8-bit values encoded as follows:
* Bit[7:4] - 0000 - Device Memory
* Bit[3:2] - 00 --> Device-nGnRnE
* 01 --> Device-nGnRE
* 10 --> Device-nGRE
* 11 --> Device-GRE
* Bit[1:0] - 00, Reserved.
*/
#define portMPU_DEVICE_MEMORY_nGnRnE ( 0x00 ) /* 0000 0000 */
#define portMPU_DEVICE_MEMORY_nGnRE ( 0x04 ) /* 0000 0100 */
#define portMPU_DEVICE_MEMORY_nGRE ( 0x08 ) /* 0000 1000 */
#define portMPU_DEVICE_MEMORY_GRE ( 0x0C ) /* 0000 1100 */
/* Normal memory attributes used in MPU_MAIR registers. */
#define portMPU_NORMAL_MEMORY_NON_CACHEABLE ( 0x44 ) /* Non-cacheable. */
#define portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE ( 0xFF ) /* Non-Transient, Write-back, Read-Allocate and Write-Allocate. */
/* Attributes used in MPU_RBAR registers. */
#define portMPU_REGION_NON_SHAREABLE ( 0UL << 3UL )
#define portMPU_REGION_INNER_SHAREABLE ( 1UL << 3UL )
#define portMPU_REGION_OUTER_SHAREABLE ( 2UL << 3UL )
#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0UL << 1UL )
#define portMPU_REGION_READ_WRITE ( 1UL << 1UL )
#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 2UL << 1UL )
#define portMPU_REGION_READ_ONLY ( 3UL << 1UL )
#define portMPU_REGION_EXECUTE_NEVER ( 1UL )
/*-----------------------------------------------------------*/
/**
* @brief Settings to define an MPU region.
*/
typedef struct MPURegionSettings
{
uint32_t ulRBAR; /**< RBAR for the region. */
uint32_t ulRLAR; /**< RLAR for the region. */
} MPURegionSettings_t;
/**
* @brief MPU settings as stored in the TCB.
*/
typedef struct MPU_SETTINGS
{
uint32_t ulMAIR0; /**< MAIR0 for the task containing attributes for all the 4 per task regions. */
MPURegionSettings_t xRegionsSettings[ portTOTAL_NUM_REGIONS ]; /**< Settings for 4 per task regions. */
} xMPU_SETTINGS;
/*-----------------------------------------------------------*/
/**
* @brief SVC numbers.
*/
#define portSVC_ALLOCATE_SECURE_CONTEXT 0
#define portSVC_FREE_SECURE_CONTEXT 1
#define portSVC_START_SCHEDULER 2
#define portSVC_RAISE_PRIVILEGE 3
/*-----------------------------------------------------------*/
/**
* @brief Scheduler utilities.
*/
#define portYIELD() vPortYield()
#define portNVIC_INT_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed04 ) )
#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
#define portEND_SWITCHING_ISR( xSwitchRequired ) do { if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; } while( 0 )
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/
/**
* @brief Critical section management.
*/
#define portSET_INTERRUPT_MASK_FROM_ISR() ulSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vClearInterruptMask( x )
#define portDISABLE_INTERRUPTS() __asm volatile ( " cpsid i " ::: "memory" )
#define portENABLE_INTERRUPTS() __asm volatile ( " cpsie i " ::: "memory" )
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
/*-----------------------------------------------------------*/
/**
* @brief Tickless idle/low power functionality.
*/
#ifndef portSUPPRESS_TICKS_AND_SLEEP
extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
#endif
/*-----------------------------------------------------------*/
/**
* @brief Task function macros as described on the FreeRTOS.org WEB site.
*/
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
/*-----------------------------------------------------------*/
#if ( configENABLE_TRUSTZONE == 1 )
/**
* @brief Allocate a secure context for the task.
*
* Tasks are not created with a secure context. Any task that is going to call
* secure functions must call portALLOCATE_SECURE_CONTEXT() to allocate itself a
* secure context before it calls any secure function.
*
* @param[in] ulSecureStackSize The size of the secure stack to be allocated.
*/
#define portALLOCATE_SECURE_CONTEXT( ulSecureStackSize ) vPortAllocateSecureContext( ulSecureStackSize )
/**
* @brief Called when a task is deleted to delete the task's secure context,
* if it has one.
*
* @param[in] pxTCB The TCB of the task being deleted.
*/
#define portCLEAN_UP_TCB( pxTCB ) vPortFreeSecureContext( ( uint32_t * ) pxTCB )
#endif /* configENABLE_TRUSTZONE */
/*-----------------------------------------------------------*/
#if ( configENABLE_MPU == 1 )
/**
* @brief Checks whether or not the processor is privileged.
*
* @return 1 if the processor is already privileged, 0 otherwise.
*/
#define portIS_PRIVILEGED() xIsPrivileged()
/**
* @brief Raise an SVC request to raise privilege.
*
* The SVC handler checks that the SVC was raised from a system call and only
* then it raises the privilege. If this is called from any other place,
* the privilege is not raised.
*/
#define portRAISE_PRIVILEGE() __asm volatile ( "svc %0 \n" ::"i" ( portSVC_RAISE_PRIVILEGE ) : "memory" );
/**
* @brief Lowers the privilege level by setting the bit 0 of the CONTROL
* register.
*/
#define portRESET_PRIVILEGE() vResetPrivilege()
#else
#define portIS_PRIVILEGED()
#define portRAISE_PRIVILEGE()
#define portRESET_PRIVILEGE()
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
/**
* @brief Barriers.
*/
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
/*-----------------------------------------------------------*/
/* Suppress warnings that are generated by the IAR tools, but cannot be fixed in
* the source code because to do so would cause other compilers to generate
* warnings. */
#pragma diag_suppress=Be006
#pragma diag_suppress=Pa082
/*-----------------------------------------------------------*/
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */