/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */


#ifndef PORTMACRO_H
#define PORTMACRO_H

/* *INDENT-OFF* */
#ifdef __cplusplus
    extern "C" {
#endif
/* *INDENT-ON* */

/*-----------------------------------------------------------
 * Port specific definitions.
 *
 * The settings in this file configure FreeRTOS correctly for the
 * given hardware and compiler.
 *
 * These settings should not be altered.
 *-----------------------------------------------------------
 */

/* Type definitions. */
#define portCHAR        char
#define portFLOAT       float
#define portDOUBLE      double
#define portLONG        long
#define portSHORT       short
#define portSTACK_TYPE  uint32_t
#define portBASE_TYPE   long

typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;

#if( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
    typedef uint16_t TickType_t;
    #define portMAX_DELAY ( TickType_t ) 0xffff
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
    typedef uint32_t TickType_t;
    #define portMAX_DELAY ( TickType_t )    ( 0xFFFFFFFF )
#else
    #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
#endif
/*-----------------------------------------------------------*/

/* Hardware specifics. */
#define portSTACK_GROWTH            ( -1 )
#define portTICK_PERIOD_MS          ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT          8
#define portYIELD()                 asm volatile ( "SWI 0" )
#define portNOP()                   asm volatile ( "NOP" )
/*-----------------------------------------------------------*/

/* Critical section handling. */
/*
 * The interrupt management utilities can only be called from ARM mode.  When
 * THUMB_INTERWORK is defined the utilities are defined as functions in
 * portISR.c to ensure a switch to ARM mode.  When THUMB_INTERWORK is not
 * defined then the utilities are defined as macros here - as per other ports.
 */

#ifdef THUMB_INTERWORK

    extern void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
    extern void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));

    #define portDISABLE_INTERRUPTS()    vPortDisableInterruptsFromThumb()
    #define portENABLE_INTERRUPTS()     vPortEnableInterruptsFromThumb()

#else

    #define portDISABLE_INTERRUPTS()                                            \
        asm volatile (                                                          \
            "STMDB  SP!, {R0}       \n\t"   /* Push R0.                     */  \
            "MRS    R0, CPSR        \n\t"   /* Get CPSR.                    */  \
            "ORR    R0, R0, #0xC0   \n\t"   /* Disable IRQ, FIQ.            */  \
            "MSR    CPSR, R0        \n\t"   /* Write back modified value.   */  \
            "LDMIA  SP!, {R0}           " ) /* Pop R0.                      */

    #define portENABLE_INTERRUPTS()                                             \
        asm volatile (                                                          \
            "STMDB  SP!, {R0}       \n\t"   /* Push R0.                     */  \
            "MRS    R0, CPSR        \n\t"   /* Get CPSR.                    */  \
            "BIC    R0, R0, #0xC0   \n\t"   /* Enable IRQ, FIQ.             */  \
            "MSR    CPSR, R0        \n\t"   /* Write back modified value.   */  \
            "LDMIA  SP!, {R0}           " ) /* Pop R0.                      */

#endif /* THUMB_INTERWORK */

extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );

#define portENTER_CRITICAL()        vPortEnterCritical();
#define portEXIT_CRITICAL()         vPortExitCritical();
/*-----------------------------------------------------------*/

/* Task utilities. */
#define portEND_SWITCHING_ISR( xSwitchRequired )    \
{                                                   \
extern void vTaskSwitchContext( void );             \
                                                    \
    if( xSwitchRequired )                           \
    {                                               \
        vTaskSwitchContext();                       \
    }                                               \
}
/*-----------------------------------------------------------*/

/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )

/* *INDENT-OFF* */
#ifdef __cplusplus
    }
#endif
/* *INDENT-ON* */

#endif /* PORTMACRO_H */