/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

#ifndef PORTMACROCOMMON_H
#define PORTMACROCOMMON_H

/* *INDENT-OFF* */
#ifdef __cplusplus
    extern "C" {
#endif
/* *INDENT-ON* */

/*------------------------------------------------------------------------------
 * Port specific definitions.
 *
 * The settings in this file configure FreeRTOS correctly for the given hardware
 * and compiler.
 *
 * These settings should not be altered.
 *------------------------------------------------------------------------------
 */

#ifndef configENABLE_FPU
    #error configENABLE_FPU must be defined in FreeRTOSConfig.h.  Set configENABLE_FPU to 1 to enable the FPU or 0 to disable the FPU.
#endif /* configENABLE_FPU */

#ifndef configENABLE_MPU
    #error configENABLE_MPU must be defined in FreeRTOSConfig.h.  Set configENABLE_MPU to 1 to enable the MPU or 0 to disable the MPU.
#endif /* configENABLE_MPU */

#ifndef configENABLE_TRUSTZONE
    #error configENABLE_TRUSTZONE must be defined in FreeRTOSConfig.h.  Set configENABLE_TRUSTZONE to 1 to enable TrustZone or 0 to disable TrustZone.
#endif /* configENABLE_TRUSTZONE */

/*-----------------------------------------------------------*/

/**
 * @brief Type definitions.
 */
#define portCHAR          char
#define portFLOAT         float
#define portDOUBLE        double
#define portLONG          long
#define portSHORT         short
#define portSTACK_TYPE    uint32_t
#define portBASE_TYPE     long

typedef portSTACK_TYPE   StackType_t;
typedef long             BaseType_t;
typedef unsigned long    UBaseType_t;

#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
    typedef uint16_t     TickType_t;
    #define portMAX_DELAY              ( TickType_t ) 0xffff
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
    typedef uint32_t     TickType_t;
    #define portMAX_DELAY              ( TickType_t ) 0xffffffffUL

/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
 * not need to be guarded with a critical section. */
    #define portTICK_TYPE_IS_ATOMIC    1
#else
    #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
#endif
/*-----------------------------------------------------------*/

/**
 * Architecture specifics.
 */
#define portSTACK_GROWTH                   ( -1 )
#define portTICK_PERIOD_MS                 ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT                 8
#define portNOP()
#define portINLINE                         __inline
#ifndef portFORCE_INLINE
    #define portFORCE_INLINE               inline __attribute__( ( always_inline ) )
#endif
#define portHAS_STACK_OVERFLOW_CHECKING    1
/*-----------------------------------------------------------*/

/**
 * @brief Extern declarations.
 */
extern BaseType_t xPortIsInsideInterrupt( void );

extern void vPortYield( void ) /* PRIVILEGED_FUNCTION */;

extern void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */;
extern void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */;

extern uint32_t ulSetInterruptMask( void ) /* __attribute__(( naked )) PRIVILEGED_FUNCTION */;
extern void vClearInterruptMask( uint32_t ulMask ) /* __attribute__(( naked )) PRIVILEGED_FUNCTION */;

#if ( configENABLE_TRUSTZONE == 1 )
    extern void vPortAllocateSecureContext( uint32_t ulSecureStackSize );     /* __attribute__ (( naked )) */
    extern void vPortFreeSecureContext( uint32_t * pulTCB ) /* __attribute__ (( naked )) PRIVILEGED_FUNCTION */;
#endif /* configENABLE_TRUSTZONE */

#if ( configENABLE_MPU == 1 )
    extern BaseType_t xIsPrivileged( void ) /* __attribute__ (( naked )) */;
    extern void vResetPrivilege( void ) /* __attribute__ (( naked )) */;
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/

/**
 * @brief MPU specific constants.
 */
#if ( configENABLE_MPU == 1 )
    #define portUSING_MPU_WRAPPERS    1
    #define portPRIVILEGE_BIT         ( 0x80000000UL )
#else
    #define portPRIVILEGE_BIT         ( 0x0UL )
#endif /* configENABLE_MPU */

/* MPU settings that can be overriden in FreeRTOSConfig.h. */
#ifndef configTOTAL_MPU_REGIONS
    /* Define to 8 for backward compatibility. */
    #define configTOTAL_MPU_REGIONS    ( 8UL )
#endif

/* MPU regions. */
#define portPRIVILEGED_FLASH_REGION                   ( 0UL )
#define portUNPRIVILEGED_FLASH_REGION                 ( 1UL )
#define portUNPRIVILEGED_SYSCALLS_REGION              ( 2UL )
#define portPRIVILEGED_RAM_REGION                     ( 3UL )
#define portSTACK_REGION                              ( 4UL )
#define portFIRST_CONFIGURABLE_REGION                 ( 5UL )
#define portLAST_CONFIGURABLE_REGION                  ( configTOTAL_MPU_REGIONS - 1UL )
#define portNUM_CONFIGURABLE_REGIONS                  ( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 )
#define portTOTAL_NUM_REGIONS                         ( portNUM_CONFIGURABLE_REGIONS + 1 )       /* Plus one to make space for the stack region. */

/* Device memory attributes used in MPU_MAIR registers.
 *
 * 8-bit values encoded as follows:
 *  Bit[7:4] - 0000 - Device Memory
 *  Bit[3:2] - 00 --> Device-nGnRnE
 *              01 --> Device-nGnRE
 *              10 --> Device-nGRE
 *              11 --> Device-GRE
 *  Bit[1:0] - 00, Reserved.
 */
#define portMPU_DEVICE_MEMORY_nGnRnE                  ( 0x00 )       /* 0000 0000 */
#define portMPU_DEVICE_MEMORY_nGnRE                   ( 0x04 )       /* 0000 0100 */
#define portMPU_DEVICE_MEMORY_nGRE                    ( 0x08 )       /* 0000 1000 */
#define portMPU_DEVICE_MEMORY_GRE                     ( 0x0C )       /* 0000 1100 */

/* Normal memory attributes used in MPU_MAIR registers. */
#define portMPU_NORMAL_MEMORY_NON_CACHEABLE           ( 0x44 )       /* Non-cacheable. */
#define portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE    ( 0xFF )       /* Non-Transient, Write-back, Read-Allocate and Write-Allocate. */

/* Attributes used in MPU_RBAR registers. */
#define portMPU_REGION_NON_SHAREABLE                  ( 0UL << 3UL )
#define portMPU_REGION_INNER_SHAREABLE                ( 1UL << 3UL )
#define portMPU_REGION_OUTER_SHAREABLE                ( 2UL << 3UL )

#define portMPU_REGION_PRIVILEGED_READ_WRITE          ( 0UL << 1UL )
#define portMPU_REGION_READ_WRITE                     ( 1UL << 1UL )
#define portMPU_REGION_PRIVILEGED_READ_ONLY           ( 2UL << 1UL )
#define portMPU_REGION_READ_ONLY                      ( 3UL << 1UL )

#define portMPU_REGION_EXECUTE_NEVER                  ( 1UL )
/*-----------------------------------------------------------*/

/**
 * @brief Settings to define an MPU region.
 */
typedef struct MPURegionSettings
{
    uint32_t ulRBAR;     /**< RBAR for the region. */
    uint32_t ulRLAR;     /**< RLAR for the region. */
} MPURegionSettings_t;

/**
 * @brief MPU settings as stored in the TCB.
 */
typedef struct MPU_SETTINGS
{
    uint32_t ulMAIR0;                                                  /**< MAIR0 for the task containing attributes for all the 4 per task regions. */
    MPURegionSettings_t xRegionsSettings[ portTOTAL_NUM_REGIONS ];     /**< Settings for 4 per task regions. */
} xMPU_SETTINGS;
/*-----------------------------------------------------------*/

/**
 * @brief Validate priority of ISRs that are allowed to call FreeRTOS
 * system calls.
 */
#ifdef configASSERT
    #if ( portHAS_BASEPRI == 1 )
        void vPortValidateInterruptPriority( void );
        #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID()    vPortValidateInterruptPriority()
    #endif
#endif

/**
 * @brief SVC numbers.
 */
#define portSVC_ALLOCATE_SECURE_CONTEXT    0
#define portSVC_FREE_SECURE_CONTEXT        1
#define portSVC_START_SCHEDULER            2
#define portSVC_RAISE_PRIVILEGE            3
/*-----------------------------------------------------------*/

/**
 * @brief Scheduler utilities.
 */
#define portYIELD()    vPortYield()
#define portNVIC_INT_CTRL_REG     ( *( ( volatile uint32_t * ) 0xe000ed04 ) )
#define portNVIC_PENDSVSET_BIT    ( 1UL << 28UL )
#define portEND_SWITCHING_ISR( xSwitchRequired )                                 \
    do { if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; } \
    while( 0 )
#define portYIELD_FROM_ISR( x )    portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/

/**
 * @brief Critical section management.
 */
#define portSET_INTERRUPT_MASK_FROM_ISR()         ulSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x )    vClearInterruptMask( x )
#define portENTER_CRITICAL()                      vPortEnterCritical()
#define portEXIT_CRITICAL()                       vPortExitCritical()
/*-----------------------------------------------------------*/

/**
 * @brief Tickless idle/low power functionality.
 */
#ifndef portSUPPRESS_TICKS_AND_SLEEP
    extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
    #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime )    vPortSuppressTicksAndSleep( xExpectedIdleTime )
#endif
/*-----------------------------------------------------------*/

/**
 * @brief Task function macros as described on the FreeRTOS.org WEB site.
 */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters )    void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters )          void vFunction( void * pvParameters )
/*-----------------------------------------------------------*/

#if ( configENABLE_TRUSTZONE == 1 )

/**
 * @brief Allocate a secure context for the task.
 *
 * Tasks are not created with a secure context. Any task that is going to call
 * secure functions must call portALLOCATE_SECURE_CONTEXT() to allocate itself a
 * secure context before it calls any secure function.
 *
 * @param[in] ulSecureStackSize The size of the secure stack to be allocated.
 */
    #define portALLOCATE_SECURE_CONTEXT( ulSecureStackSize )    vPortAllocateSecureContext( ulSecureStackSize )

/**
 * @brief Called when a task is deleted to delete the task's secure context,
 * if it has one.
 *
 * @param[in] pxTCB The TCB of the task being deleted.
 */
    #define portCLEAN_UP_TCB( pxTCB )                           vPortFreeSecureContext( ( uint32_t * ) pxTCB )
#endif /* configENABLE_TRUSTZONE */
/*-----------------------------------------------------------*/

#if ( configENABLE_MPU == 1 )

/**
 * @brief Checks whether or not the processor is privileged.
 *
 * @return 1 if the processor is already privileged, 0 otherwise.
 */
    #define portIS_PRIVILEGED()      xIsPrivileged()

/**
 * @brief Raise an SVC request to raise privilege.
 *
 * The SVC handler checks that the SVC was raised from a system call and only
 * then it raises the privilege. If this is called from any other place,
 * the privilege is not raised.
 */
    #define portRAISE_PRIVILEGE()    __asm volatile ( "svc %0 \n" ::"i" ( portSVC_RAISE_PRIVILEGE ) : "memory" );

/**
 * @brief Lowers the privilege level by setting the bit 0 of the CONTROL
 * register.
 */
    #define portRESET_PRIVILEGE()    vResetPrivilege()
#else
    #define portIS_PRIVILEGED()
    #define portRAISE_PRIVILEGE()
    #define portRESET_PRIVILEGE()
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/

/**
 * @brief Barriers.
 */
#define portMEMORY_BARRIER()    __asm volatile ( "" ::: "memory" )
/*-----------------------------------------------------------*/

/* *INDENT-OFF* */
#ifdef __cplusplus
    }
#endif
/* *INDENT-ON* */

#endif /* PORTMACROCOMMON_H */