/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

#include "FreeRTOSConfig.h"

#define portCONTEXT_SIZE 132
#define portEPC_STACK_LOCATION  124
#define portSTATUS_STACK_LOCATION 128

/******************************************************************/
.macro  portSAVE_CONTEXT

    /* Make room for the context. First save the current status so it can be
    manipulated, and the cause and EPC registers so their original values are
    captured. */
    mfc0        k0, _CP0_CAUSE
    addiu       sp, sp, -portCONTEXT_SIZE
    mfc0        k1, _CP0_STATUS

    /* Also save s6 and s5 so they can be used.  Any nesting interrupts should
    maintain the values of these registers across the ISR. */
    sw          s6, 44(sp)
    sw          s5, 40(sp)
    sw          k1, portSTATUS_STACK_LOCATION(sp)

    /* Prepare to enable interrupts above the current priority. */
    srl         k0, k0, 0xa
    ins         k1, k0, 10, 6
    ins         k1, zero, 1, 4

    /* s5 is used as the frame pointer. */
    add         s5, zero, sp

    /* Check the nesting count value. */
    la          k0, uxInterruptNesting
    lw          s6, (k0)

    /* If the nesting count is 0 then swap to the the system stack, otherwise
    the system stack is already being used. */
    bne         s6, zero, 1f
    nop

    /* Swap to the system stack. */
    la          sp, xISRStackTop
    lw          sp, (sp)

    /* Increment and save the nesting count. */
1:  addiu       s6, s6, 1
    sw          s6, 0(k0)

    /* s6 holds the EPC value, this is saved after interrupts are re-enabled. */
    mfc0        s6, _CP0_EPC

    /* Re-enable interrupts. */
    mtc0        k1, _CP0_STATUS

    /* Save the context into the space just created.  s6 is saved again
    here as it now contains the EPC value.  No other s registers need be
    saved. */
    sw          ra, 120(s5)
    sw          s8, 116(s5)
    sw          t9, 112(s5)
    sw          t8, 108(s5)
    sw          t7, 104(s5)
    sw          t6, 100(s5)
    sw          t5, 96(s5)
    sw          t4, 92(s5)
    sw          t3, 88(s5)
    sw          t2, 84(s5)
    sw          t1, 80(s5)
    sw          t0, 76(s5)
    sw          a3, 72(s5)
    sw          a2, 68(s5)
    sw          a1, 64(s5)
    sw          a0, 60(s5)
    sw          v1, 56(s5)
    sw          v0, 52(s5)
    sw          s6, portEPC_STACK_LOCATION(s5)
    sw          $1, 16(s5)

    /* s6 is used as a scratch register. */
    mfhi        s6
    sw          s6, 12(s5)
    mflo        s6
    sw          s6, 8(s5)

    /* Update the task stack pointer value if nesting is zero. */
    la          s6, uxInterruptNesting
    lw          s6, (s6)
    addiu       s6, s6, -1
    bne         s6, zero, 1f
    nop

    /* Save the stack pointer. */
    la          s6, uxSavedTaskStackPointer
    sw          s5, (s6)
1:
    .endm

/******************************************************************/
.macro  portRESTORE_CONTEXT

    /* Restore the stack pointer from the TCB.  This is only done if the
    nesting count is 1. */
    la          s6, uxInterruptNesting
    lw          s6, (s6)
    addiu       s6, s6, -1
    bne         s6, zero, 1f
    nop
    la          s6, uxSavedTaskStackPointer
    lw          s5, (s6)

    /* Restore the context. */
1:  lw          s6, 8(s5)
    mtlo        s6
    lw          s6, 12(s5)
    mthi        s6
    lw          $1, 16(s5)
    /* s6 is loaded as it was used as a scratch register and therefore saved
    as part of the interrupt context. */
    lw          s6, 44(s5)
    lw          v0, 52(s5)
    lw          v1, 56(s5)
    lw          a0, 60(s5)
    lw          a1, 64(s5)
    lw          a2, 68(s5)
    lw          a3, 72(s5)
    lw          t0, 76(s5)
    lw          t1, 80(s5)
    lw          t2, 84(s5)
    lw          t3, 88(s5)
    lw          t4, 92(s5)
    lw          t5, 96(s5)
    lw          t6, 100(s5)
    lw          t7, 104(s5)
    lw          t8, 108(s5)
    lw          t9, 112(s5)
    lw          s8, 116(s5)
    lw          ra, 120(s5)

    /* Protect access to the k registers, and others. */
    di
    ehb

    /* Decrement the nesting count. */
    la          k0, uxInterruptNesting
    lw          k1, (k0)
    addiu       k1, k1, -1
    sw          k1, 0(k0)

    lw          k0, portSTATUS_STACK_LOCATION(s5)
    lw          k1, portEPC_STACK_LOCATION(s5)

    /* Leave the stack in its original state.  First load sp from s5, then
    restore s5 from the stack. */
    add         sp, zero, s5
    lw          s5, 40(sp)
    addiu       sp, sp, portCONTEXT_SIZE

    mtc0        k0, _CP0_STATUS
    mtc0        k1, _CP0_EPC
    ehb
    eret
    nop

    .endm