/*
    FreeRTOS V7.5.3 - Copyright (C) 2013 Real Time Engineers Ltd. 
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that has become a de facto standard.             *
     *                                                                       *
     *    Help yourself get started quickly and support the FreeRTOS         *
     *    project by purchasing a FreeRTOS tutorial book, reference          *
     *    manual, or both from: http://www.FreeRTOS.org/Documentation        *
     *                                                                       *
     *    Thank you!                                                         *
     *                                                                       *
    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

    >>! NOTE: The modification to the GPL is included to allow you to distribute
    >>! a combined work that includes FreeRTOS without being obliged to provide
    >>! the source code for proprietary components outside of the FreeRTOS
    >>! kernel.

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available from the following
    link: http://www.freertos.org/a00114.html

    1 tab == 4 spaces!

    ***************************************************************************
     *                                                                       *
     *    Having a problem?  Start by reading the FAQ "My application does   *
     *    not run, what could be wrong?"                                     *
     *                                                                       *
     *    http://www.FreeRTOS.org/FAQHelp.html                               *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
    license and Real Time Engineers Ltd. contact details.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
    Integrity Systems to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

#include <stdlib.h>

#include "FreeRTOS.h"
#include "task.h"

/*-----------------------------------------------------------
 * Implementation of functions defined in portable.h for the AVR/IAR port.
 *----------------------------------------------------------*/

/* Start tasks with interrupts enables. */
#define portFLAGS_INT_ENABLED					( ( portSTACK_TYPE ) 0x80 )

/* Hardware constants for timer 1. */
#define portCLEAR_COUNTER_ON_MATCH				( ( unsigned char ) 0x08 )
#define portPRESCALE_64							( ( unsigned char ) 0x03 )
#define portCLOCK_PRESCALER						( ( unsigned long ) 64 )
#define portCOMPARE_MATCH_A_INTERRUPT_ENABLE	( ( unsigned char ) 0x10 )

/* The number of bytes used on the hardware stack by the task start address. */
#define portBYTES_USED_BY_RETURN_ADDRESS		( 2 )
/*-----------------------------------------------------------*/

/* Stores the critical section nesting.  This must not be initialised to 0.
It will be initialised when a task starts. */
#define portNO_CRITICAL_NESTING					( ( unsigned portBASE_TYPE ) 0 )
unsigned portBASE_TYPE uxCriticalNesting = 0x50;


/*
 * Perform hardware setup to enable ticks from timer 1, compare match A.
 */
static void prvSetupTimerInterrupt( void );

/*
 * The IAR compiler does not have full support for inline assembler, so
 * these are defined in the portmacro assembler file.
 */
extern void vPortYieldFromTick( void );
extern void vPortStart( void );

/*-----------------------------------------------------------*/

/*
 * See header file for description.
 */
portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )
{
unsigned short usAddress;
portSTACK_TYPE *pxTopOfHardwareStack;

	/* Place a few bytes of known values on the bottom of the stack.
	This is just useful for debugging. */

	*pxTopOfStack = 0x11;
	pxTopOfStack--;
	*pxTopOfStack = 0x22;
	pxTopOfStack--;
	*pxTopOfStack = 0x33;
	pxTopOfStack--;

	/* Remember where the top of the hardware stack is - this is required
	below. */
	pxTopOfHardwareStack = pxTopOfStack;


	/* Simulate how the stack would look after a call to vPortYield(). */

	/*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */



	/* The IAR compiler requires two stacks per task.  First there is the
	hardware call stack which uses the AVR stack pointer.  Second there is the
	software stack (local variables, parameter passing, etc.) which uses the
	AVR Y register.

	This function places both stacks within the memory block passed in as the
	first parameter.  The hardware stack is placed at the bottom of the memory
	block.  A gap is then left for the hardware stack to grow.  Next the software
	stack is placed.  The amount of space between the software and hardware
	stacks is defined by configCALL_STACK_SIZE.



	The first part of the stack is the hardware stack.  Place the start
	address of the task on the hardware stack. */
	usAddress = ( unsigned short ) pxCode;
	*pxTopOfStack = ( portSTACK_TYPE ) ( usAddress & ( unsigned short ) 0x00ff );
	pxTopOfStack--;

	usAddress >>= 8;
	*pxTopOfStack = ( portSTACK_TYPE ) ( usAddress & ( unsigned short ) 0x00ff );
	pxTopOfStack--;


	/* Leave enough space for the hardware stack before starting the software
	stack.  The '- 2' is because we have already used two spaces for the
	address of the start of the task. */
	pxTopOfStack -= ( configCALL_STACK_SIZE - 2 );



	/* Next simulate the stack as if after a call to portSAVE_CONTEXT().
	portSAVE_CONTEXT places the flags on the stack immediately after r0
	to ensure the interrupts get disabled as soon as possible, and so ensuring
	the stack use is minimal should a context switch interrupt occur. */
	*pxTopOfStack = ( portSTACK_TYPE ) 0x00;	/* R0 */
	pxTopOfStack--;
	*pxTopOfStack = portFLAGS_INT_ENABLED;
	pxTopOfStack--;

	/* Next place the address of the hardware stack.  This is required so
	the AVR stack pointer can be restored to point to the hardware stack. */
	pxTopOfHardwareStack -= portBYTES_USED_BY_RETURN_ADDRESS;
	usAddress = ( unsigned short ) pxTopOfHardwareStack;

	/* SPL */
	*pxTopOfStack = ( portSTACK_TYPE ) ( usAddress & ( unsigned short ) 0x00ff );
	pxTopOfStack--;

	/* SPH */
	usAddress >>= 8;
	*pxTopOfStack = ( portSTACK_TYPE ) ( usAddress & ( unsigned short ) 0x00ff );
	pxTopOfStack--;




	/* Now the remaining registers. */
	*pxTopOfStack = ( portSTACK_TYPE ) 0x01;	/* R1 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x02;	/* R2 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x03;	/* R3 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x04;	/* R4 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x05;	/* R5 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x06;	/* R6 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x07;	/* R7 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x08;	/* R8 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x09;	/* R9 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x10;	/* R10 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x11;	/* R11 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x12;	/* R12 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x13;	/* R13 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x14;	/* R14 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x15;	/* R15 */
	pxTopOfStack--;

	/* Place the parameter on the stack in the expected location. */
	usAddress = ( unsigned short ) pvParameters;
	*pxTopOfStack = ( portSTACK_TYPE ) ( usAddress & ( unsigned short ) 0x00ff );
	pxTopOfStack--;

	usAddress >>= 8;
	*pxTopOfStack = ( portSTACK_TYPE ) ( usAddress & ( unsigned short ) 0x00ff );
	pxTopOfStack--;

	*pxTopOfStack = ( portSTACK_TYPE ) 0x18;	/* R18 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x19;	/* R19 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x20;	/* R20 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x21;	/* R21 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x22;	/* R22 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x23;	/* R23 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x24;	/* R24 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x25;	/* R25 */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x26;	/* R26 X */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x27;	/* R27 */
	pxTopOfStack--;

	/* The Y register is not stored as it is used as the software stack and
	gets saved into the task control block. */

	*pxTopOfStack = ( portSTACK_TYPE ) 0x30;	/* R30 Z */
	pxTopOfStack--;
	*pxTopOfStack = ( portSTACK_TYPE ) 0x031;	/* R31 */

	pxTopOfStack--;
	*pxTopOfStack = portNO_CRITICAL_NESTING;	/* Critical nesting is zero when the task starts. */

	/*lint +e950 +e611 +e923 */

	return pxTopOfStack;
}
/*-----------------------------------------------------------*/

portBASE_TYPE xPortStartScheduler( void )
{
	/* Setup the hardware to generate the tick. */
	prvSetupTimerInterrupt();

	/* Restore the context of the first task that is going to run.
	Normally we would just call portRESTORE_CONTEXT() here, but as the IAR
	compiler does not fully support inline assembler we have to make a call.*/
	vPortStart();

	/* Should not get here! */
	return pdTRUE;
}
/*-----------------------------------------------------------*/

void vPortEndScheduler( void )
{
	/* It is unlikely that the AVR port will get stopped.  If required simply
	disable the tick interrupt here. */
}
/*-----------------------------------------------------------*/

/*
 * Setup timer 1 compare match A to generate a tick interrupt.
 */
static void prvSetupTimerInterrupt( void )
{
unsigned long ulCompareMatch;
unsigned char ucHighByte, ucLowByte;

	/* Using 16bit timer 1 to generate the tick.  Correct fuses must be
	selected for the configCPU_CLOCK_HZ clock. */

	ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;

	/* We only have 16 bits so have to scale to get our required tick rate. */
	ulCompareMatch /= portCLOCK_PRESCALER;

	/* Adjust for correct value. */
	ulCompareMatch -= ( unsigned long ) 1;

	/* Setup compare match value for compare match A.  Interrupts are disabled
	before this is called so we need not worry here. */
	ucLowByte = ( unsigned char ) ( ulCompareMatch & ( unsigned long ) 0xff );
	ulCompareMatch >>= 8;
	ucHighByte = ( unsigned char ) ( ulCompareMatch & ( unsigned long ) 0xff );
	OCR1AH = ucHighByte;
	OCR1AL = ucLowByte;

	/* Setup clock source and compare match behaviour. */
	ucLowByte = portCLEAR_COUNTER_ON_MATCH | portPRESCALE_64;
	TCCR1B = ucLowByte;

	/* Enable the interrupt - this is okay as interrupt are currently globally
	disabled. */
	TIMSK |= portCOMPARE_MATCH_A_INTERRUPT_ENABLE;
}
/*-----------------------------------------------------------*/

#if configUSE_PREEMPTION == 1

	/*
	 * Tick ISR for preemptive scheduler.  We can use a __task attribute as
	 * the context is saved at the start of vPortYieldFromTick().  The tick
	 * count is incremented after the context is saved.
	 */
	__task void SIG_OUTPUT_COMPARE1A( void )
	{
		vPortYieldFromTick();
		asm( "reti" );
	}

#else

	/*
	 * Tick ISR for the cooperative scheduler.  All this does is increment the
	 * tick count.  We don't need to switch context, this can only be done by
	 * manual calls to taskYIELD();
	 *
	 * THE INTERRUPT VECTOR IS POPULATED IN portmacro.s90.  DO NOT INSTALL
	 * IT HERE USING THE USUAL PRAGMA.
	 */
	__interrupt void SIG_OUTPUT_COMPARE1A( void )
	{
		xTaskIncrementTick();
	}
#endif
/*-----------------------------------------------------------*/

void vPortEnterCritical( void )
{
	portDISABLE_INTERRUPTS();
	uxCriticalNesting++;
}
/*-----------------------------------------------------------*/

void vPortExitCritical( void )
{
	uxCriticalNesting--;
	if( uxCriticalNesting == portNO_CRITICAL_NESTING )
	{
		portENABLE_INTERRUPTS();
	}
}