/*
 * FreeRTOS Kernel V10.3.1
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 */

/*
Changes from V1.00:
	
	+ Call to taskYIELD() from within tick ISR has been replaced by the more
	  efficient portSWITCH_CONTEXT().
	+ ISR function definitions renamed to include the prv prefix.

Changes from V1.2.0:

	+ prvPortResetPIC() is now called last thing before the end of the 
	  preemptive tick routine.

Changes from V2.6.1

	+ Replaced the sUsingPreemption variable with the configUSE_PREEMPTION
	  macro to be consistent with the later ports.

Changes from V4.0.1
	
	+ Add function prvSetTickFrequencyDefault() to set the DOS tick back to
	  its proper value when the scheduler exits. 
*/

#include <stdlib.h>
#include <stdio.h>
#include <i86.h>
#include <dos.h>
#include <setjmp.h>

#include "FreeRTOS.h"
#include "task.h"
#include "portasm.h"

/*-----------------------------------------------------------
 * Implementation of functions defined in portable.h for the industrial
 * PC port.
 *----------------------------------------------------------*/

/*lint -e950 Non ANSI reserved words okay in this file only. */

#define portTIMER_INT_NUMBER	0x08

/* Setup hardware for required tick interrupt rate. */
static void prvSetTickFrequency( uint32_t ulTickRateHz );

/* Restore hardware to as it was prior to starting the scheduler. */
static void prvExitFunction( void );

/* Either chain to the DOS tick (which itself clears the PIC) or clear the PIC
directly.  We chain to the DOS tick as close as possible to the standard DOS
tick rate. */
static void prvPortResetPIC( void );

/* The tick ISR used depends on whether the preemptive or cooperative scheduler
is being used. */
#if configUSE_PREEMPTION == 1
	/* Tick service routine used by the scheduler when preemptive scheduling is
	being used. */
	static void __interrupt __far prvPreemptiveTick( void );
#else
	/* Tick service routine used by the scheduler when cooperative scheduling is 
	being used. */
	static void __interrupt __far prvNonPreemptiveTick( void );
#endif
/* Trap routine used by taskYIELD() to manually cause a context switch. */
static void __interrupt __far prvYieldProcessor( void );

/* Set the tick frequency back so the floppy drive works correctly when the
scheduler exits. */
static void prvSetTickFrequencyDefault( void );

/*lint -e956 File scopes necessary here. */

/* Used to signal when to chain to the DOS tick, and when to just clear the PIC ourselves. */
static int16_t sDOSTickCounter;							

/* Set true when the vectors are set so the scheduler will service the tick. */
static int16_t sSchedulerRunning = pdFALSE;				

/* Points to the original routine installed on the vector we use for manual context switches.  This is then used to restore the original routine during prvExitFunction(). */
static void ( __interrupt __far *pxOldSwitchISR )();		

/* Points to the original routine installed on the vector we use to chain to the DOS tick.  This is then used to restore the original routine during prvExitFunction(). */
static void ( __interrupt __far *pxOldSwitchISRPlus1 )();	

/* Used to restore the original DOS context when the scheduler is ended. */
static jmp_buf xJumpBuf;

/*lint +e956 */

/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
pxISR pxOriginalTickISR;
	
	/* This is called with interrupts already disabled. */

	/* Remember what was on the interrupts we are going to use
	so we can put them back later if required. */
	pxOldSwitchISR = _dos_getvect( portSWITCH_INT_NUMBER );
	pxOriginalTickISR = _dos_getvect( portTIMER_INT_NUMBER );
	pxOldSwitchISRPlus1 = _dos_getvect( portSWITCH_INT_NUMBER + 1 );

	prvSetTickFrequency( configTICK_RATE_HZ );

	/* Put our manual switch (yield) function on a known
	vector. */
	_dos_setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );

	/* Put the old tick on a different interrupt number so we can
	call it when we want. */
	_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOriginalTickISR );

	#if configUSE_PREEMPTION == 1
	{		
		/* Put our tick switch function on the timer interrupt. */
		_dos_setvect( portTIMER_INT_NUMBER, prvPreemptiveTick );
	}
	#else
	{
		/* We want the timer interrupt to just increment the tick count. */
		_dos_setvect( portTIMER_INT_NUMBER, prvNonPreemptiveTick );
	}
	#endif

	/* Setup a counter that is used to call the DOS interrupt as close
	to it's original frequency as can be achieved given our chosen tick
	frequency. */
	sDOSTickCounter = portTICKS_PER_DOS_TICK;

	/* Clean up function if we want to return to DOS. */
	if( setjmp( xJumpBuf ) != 0 )
	{
		prvExitFunction();
		sSchedulerRunning = pdFALSE;
	}
	else
	{
		sSchedulerRunning = pdTRUE;

		/* Kick off the scheduler by setting up the context of the first task. */
		portFIRST_CONTEXT();
	}

	return sSchedulerRunning;
}
/*-----------------------------------------------------------*/

/* The tick ISR used depends on whether the preemptive or cooperative scheduler
is being used. */
#if configUSE_PREEMPTION == 1
	/* Tick service routine used by the scheduler when preemptive scheduling is
	being used. */
	static void __interrupt __far prvPreemptiveTick( void )
	{
		/* Get the scheduler to update the task states following the tick. */
		if( xTaskIncrementTick() != pdFALSE )
		{
			/* Switch in the context of the next task to be run. */
			portSWITCH_CONTEXT();
		}

		/* Reset the PIC ready for the next time. */
		prvPortResetPIC();
	}
#else
	static void __interrupt __far prvNonPreemptiveTick( void )
	{
		/* Same as preemptive tick, but the cooperative scheduler is being used
		so we don't have to switch in the context of the next task. */
		xTaskIncrementTick();
		prvPortResetPIC();
	}
#endif
/*-----------------------------------------------------------*/


static void __interrupt __far prvYieldProcessor( void )
{
	/* Switch in the context of the next task to be run. */
	portSWITCH_CONTEXT();
}
/*-----------------------------------------------------------*/

static void prvPortResetPIC( void )
{
	/* We are going to call the DOS tick interrupt at as close a
	frequency to the normal DOS tick as possible. */

	/* WE SHOULD NOT DO THIS IF YIELD WAS CALLED. */
	--sDOSTickCounter;
	if( sDOSTickCounter <= 0 )
	{
		sDOSTickCounter = ( int16_t ) portTICKS_PER_DOS_TICK;
		__asm{ int	portSWITCH_INT_NUMBER + 1 };		 
	}
	else
	{
		/* Reset the PIC as the DOS tick is not being called to
		do it. */
		__asm
		{
			mov	al, 20H
			out 20H, al
		};
	}
}
/*-----------------------------------------------------------*/

void vPortEndScheduler( void )
{
	/* Jump back to the processor state prior to starting the
	scheduler.  This means we are not going to be using a
	task stack frame so the task can be deleted. */
	longjmp( xJumpBuf, 1 );
}
/*-----------------------------------------------------------*/

static void prvExitFunction( void )
{
void ( __interrupt __far *pxOriginalTickISR )();

	/* Interrupts should be disabled here anyway - but no 
	harm in making sure. */
	portDISABLE_INTERRUPTS();
	if( sSchedulerRunning == pdTRUE )
	{
		/* Set the DOS tick back onto the timer ticker. */
		pxOriginalTickISR = _dos_getvect( portSWITCH_INT_NUMBER + 1 );
		_dos_setvect( portTIMER_INT_NUMBER, pxOriginalTickISR );
		prvSetTickFrequencyDefault();

		/* Put back the switch interrupt routines that was in place
		before the scheduler started. */
		_dos_setvect( portSWITCH_INT_NUMBER, pxOldSwitchISR );
		_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOldSwitchISRPlus1 );
	}
	/* The tick timer is back how DOS wants it.  We can re-enable
	interrupts without the scheduler being called. */
	portENABLE_INTERRUPTS();
}
/*-----------------------------------------------------------*/

static void prvSetTickFrequency( uint32_t ulTickRateHz )
{
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint32_t ulPIT_CONST = ( uint32_t ) 1193180;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;
uint32_t ulOutput;

	/* Setup the 8245 to tick at the wanted frequency. */
	portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
	ulOutput = ulPIT_CONST / ulTickRateHz;
   
	portOUTPUT_BYTE( usPIT0, ( uint16_t )( ulOutput & ( uint32_t ) 0xff ) );
	ulOutput >>= 8;
	portOUTPUT_BYTE( usPIT0, ( uint16_t ) ( ulOutput & ( uint32_t ) 0xff ) );
}
/*-----------------------------------------------------------*/

static void prvSetTickFrequencyDefault( void )
{
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;

	portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
	portOUTPUT_BYTE( usPIT0,0 );
	portOUTPUT_BYTE( usPIT0,0 );
}


/*lint +e950 */