/*
 * FreeRTOS Kernel V10.0.0
 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software. If you wish to use our Amazon
 * FreeRTOS name, please do so in a fair use way that does not cause confusion.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

#include <stdlib.h>
#include "porthardware.h"
#include "FreeRTOS.h"
#include "task.h"

/*-----------------------------------------------------------
 * Implementation of functions defined in portable.h for the AVR port.
 *----------------------------------------------------------*/

/* Start tasks with interrupts enables. */
#define portFLAGS_INT_ENABLED               ((StackType_t) 0x80)

/*-----------------------------------------------------------*/


#define portBYTES_USED_BY_RETURN_ADDRESS    2
#define portNO_CRITICAL_NESTING             ( ( UBaseType_t ) 0 )

/* Stores the critical section nesting.  This must not be initialised to 0.
It will be initialised when a task starts. */
UBaseType_t uxCriticalNesting = 0x50;
/*
 * Setup timer to generate a tick interrupt.
 */
static void prvSetupTimerInterrupt(void);

/*
 * The IAR compiler does not have full support for inline assembler, so
 * these are defined in the portmacro assembler file.
 */
extern void vPortYieldFromTick( void );
extern void vPortStart( void );

/*-----------------------------------------------------------*/

/*
 * See header file for description.
 */
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters)
{
uint16_t usAddress;
StackType_t *pxTopOfHardwareStack;
    /* Simulate how the stack would look after a call to vPortYield(). */

    /*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */
        
    /* The IAR compiler requires two stacks per task.  First there is the
    hardware call stack which uses the AVR stack pointer.  Second there is the
    software stack (local variables, parameter passing, etc.) which uses the
    AVR Y register.
    This function places both stacks within the memory block passed in as the
    first parameter.  The hardware stack is placed at the bottom of the memory
    block.  A gap is then left for the hardware stack to grow.  Next the software
    stack is placed.  The amount of space between the software and hardware
    stacks is defined by configCALL_STACK_SIZE.
    The first part of the stack is the hardware stack.  Place the start
    address of the task on the hardware stack. */
    
    /* Place a few bytes of known values on the bottom of the stack.
    This is just useful for debugging. */
    //*pxTopOfStack = 0x11;
    //pxTopOfStack--;
    //*pxTopOfStack = 0x22;
    //pxTopOfStack--;
    //*pxTopOfStack = 0x33;
    //pxTopOfStack--;
    
    /* Remember where the top of the hardware stack is - this is required
    below. */
    pxTopOfHardwareStack = pxTopOfStack;

    usAddress = ( uint16_t ) pxCode;
    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
    pxTopOfStack--;

    usAddress >>= 8;
    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
    pxTopOfStack--;

    /* Leave enough space for the hardware stack before starting the software
    stack.  The '- 2' is because we have already used two spaces for the
    address of the start of the task. */
    pxTopOfStack -= ( configCALL_STACK_SIZE - 2 );

    /* Next simulate the stack as if after a call to portSAVE_CONTEXT().
    portSAVE_CONTEXT places the flags on the stack immediately after r0
    to ensure the interrupts get disabled as soon as possible, and so ensuring
    the stack use is minimal should a context switch interrupt occur. */
    *pxTopOfStack = ( StackType_t ) 0x00;       /* R0 */
    pxTopOfStack--;
    *pxTopOfStack = portFLAGS_INT_ENABLED;
    pxTopOfStack--;

    /* Next place the address of the hardware stack.  This is required so
    the AVR stack pointer can be restored to point to the hardware stack. */
    pxTopOfHardwareStack -= portBYTES_USED_BY_RETURN_ADDRESS;
    usAddress = ( uint16_t ) pxTopOfHardwareStack;

    /* SPL */
    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
    pxTopOfStack--;

    /* SPH */
    usAddress >>= 8;
    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
    pxTopOfStack--;

    /* Now the remaining registers. */
    *pxTopOfStack = ( StackType_t ) 0x01;       /* R1 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x02;       /* R2 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x03;       /* R3 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x04;       /* R4 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x05;       /* R5 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x06;       /* R6 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x07;       /* R7 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x08;       /* R8 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x09;       /* R9 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x10;       /* R10 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x11;       /* R11 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x12;       /* R12 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x13;       /* R13 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x14;       /* R14 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x15;       /* R15 */
    pxTopOfStack--;

    /* Place the parameter on the stack in the expected location. */
    usAddress     = (uint16_t) pvParameters;
    *pxTopOfStack = (StackType_t) (usAddress & (uint16_t) 0x00ff);
    pxTopOfStack--;

    usAddress >>= 8;
    *pxTopOfStack = (StackType_t) (usAddress & (uint16_t) 0x00ff);
    pxTopOfStack--;

    *pxTopOfStack = ( StackType_t ) 0x18;       /* R18 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x19;       /* R19 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x20;       /* R20 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x21;       /* R21 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x22;       /* R22 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x23;       /* R23 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x24;       /* R24 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x25;       /* R25 */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x26;       /* R26 X */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x27;       /* R27 */
    pxTopOfStack--;

    /* The Y register is not stored as it is used as the software stack and
    gets saved into the task control block. */

    *pxTopOfStack = ( StackType_t ) 0x30;       /* R30 Z */
    pxTopOfStack--;
    *pxTopOfStack = ( StackType_t ) 0x031;      /* R31 */
        
        pxTopOfStack--;
    *pxTopOfStack = portNO_CRITICAL_NESTING;    /* Critical nesting is zero when the task starts. */

    /*lint +e950 +e611 +e923 */

    return pxTopOfStack;
}
/*-----------------------------------------------------------*/

BaseType_t xPortStartScheduler(void)
{
    /* Setup the hardware to generate the tick. */
    prvSetupTimerInterrupt();

    /* Restore the context of the first task that is going to run.
    Normally we would just call portRESTORE_CONTEXT() here, but as the IAR
    compiler does not fully support inline assembler we have to make a call.*/
    vPortStart();

    /* Should not get here. */
    return pdTRUE;
}
/*-----------------------------------------------------------*/

void vPortEndScheduler(void)
{
    /* vPortEndScheduler is not implemented in this port. */
}

/*-----------------------------------------------------------*/

/*
 * Setup timer to generate a tick interrupt.
 */
static void prvSetupTimerInterrupt(void)
{
    TICK_init();
}

/*-----------------------------------------------------------*/

#if configUSE_PREEMPTION == 1
/*
 * Tick ISR for preemptive scheduler.  We can use a naked attribute as
 * the context is saved at the start of vPortYieldFromTick().  The tick
 * count is incremented after the context is saved.
 */

__task void TICK_INT(void)
{
    vPortYieldFromTick();
    asm("reti");
}
#else
/*
 * Tick ISR for the cooperative scheduler.  All this does is increment the
 * tick count.  We don't need to switch context, this can only be done by
 * manual calls to taskYIELD();
 */

__interrupt void TICK_INT(void)
{
    /* Clear tick interrupt flag. */
    INT_FLAGS = INT_MASK;
        
    xTaskIncrementTick();
}
#endif

/*-----------------------------------------------------------*/

void vPortEnterCritical( void )
{
    portDISABLE_INTERRUPTS();
    uxCriticalNesting++;
}

/*-----------------------------------------------------------*/

void vPortExitCritical( void )
{
    uxCriticalNesting--;
    if( uxCriticalNesting == portNO_CRITICAL_NESTING )
    {
        portENABLE_INTERRUPTS();
    }
}