FreeRTOS/Demo/TriCore_TC1782_TriBoard_GCC/RTOSDemo/FreeRTOSConfig.h

/*
 * FreeRTOS Kernel V10.2.1
 * Copyright (C) 2019 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

/*
 * The following #error directive is to remind users that a batch file must be
 * executed prior to this project being built.  The batch file *cannot* be
 * executed from within the IDE!  Once it has been executed, re-open or refresh
 * the Eclipse project and remove the #error line below.
 */
#error Ensure CreateProjectDirectoryStructure.bat has been executed before building.  See comment immediately above.

/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
 *
 * See http://www.freertos.org/a00110.html
 */

/*----------------------------------------------------------*/

#define configUSE_PREEMPTION				1
#define configUSE_IDLE_HOOK					1
/* CPU is actually 150MHz but FPIDIV is 1 meaning divide by 2 for the
peripheral clock. */
#define configCPU_CLOCK_HZ					( ( unsigned long ) 150000000UL )
#define configPERIPHERAL_CLOCK_HZ			( ( unsigned long ) configCPU_CLOCK_HZ / 2UL )
#define configTICK_RATE_HZ					( ( TickType_t ) 1000UL )
#define configMAX_PRIORITIES				( 6 )
#define configMINIMAL_STACK_SIZE			( ( unsigned short ) 128 )
#define configTOTAL_HEAP_SIZE				( ( size_t ) ( 35U * 1024U ) )
#define configMAX_TASK_NAME_LEN				( 16 )
#define configUSE_TRACE_FACILITY			0
#define configUSE_16_BIT_TICKS				0
#define configIDLE_SHOULD_YIELD				0
#define configUSE_MALLOC_FAILED_HOOK 		1
#define configCHECK_FOR_STACK_OVERFLOW		0
#define configUSE_TICK_HOOK					1
#define configUSE_COUNTING_SEMAPHORES 		1
#define configUSE_RECURSIVE_MUTEXES			1
#define configUSE_MUTEXES					1

/* Co-routine definitions. */
#define configUSE_CO_ROUTINES 				0
#define configMAX_CO_ROUTINE_PRIORITIES 	( 2 )

/* Software timer configuration. */
#define configUSE_TIMERS					1
#define configTIMER_TASK_PRIORITY			( 4 )
#define configTIMER_QUEUE_LENGTH			( 5 )
#define configTIMER_TASK_STACK_DEPTH		configMINIMAL_STACK_SIZE

/* Set the following definitions to 1 to include the API function, or zero
 to exclude the API function. */

#define INCLUDE_vTaskPrioritySet				1
#define INCLUDE_uxTaskPriorityGet				1
#define INCLUDE_vTaskDelete						1
#define INCLUDE_vTaskCleanUpResources			1
#define INCLUDE_vTaskSuspend					1
#define INCLUDE_vTaskDelayUntil					1
#define INCLUDE_vTaskDelay						1

#define configMAX_SYSCALL_INTERRUPT_PRIORITY	64 /* Interrupt above priority 64 are not effected by critical sections, but cannot call interrupt safe FreeRTOS functions. */
#define configKERNEL_INTERRUPT_PRIORITY			2  /* This is defined here for clarity, but the value must not be changed from 2. */
#define configKERNEL_YIELD_PRIORITY				1  /* This is defined here for clarity, but must not be changed from its default value of 1. */

/* Interrupt priorities. */
#define configINTERRUPT_PRIORITY_TX				16
#define configINTERRUPT_PRIORITY_RX				18
#define configHIGH_FREQUENCY_TIMER_PRIORITY		( configMAX_SYSCALL_INTERRUPT_PRIORITY - 1UL )

/* Default definition of configASSERT(). */
#define configASSERT( x ) if( ( x ) == 0 ) 		{ portDISABLE_INTERRUPTS(); for( ;; ); }


#endif /* FREERTOS_CONFIG_H */