/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */


#ifndef PORTMACRO_H
#define PORTMACRO_H

/* *INDENT-OFF* */
#ifdef __cplusplus
    extern "C" {
#endif
/* *INDENT-ON* */

/*-----------------------------------------------------------
 * Port specific definitions.
 *
 * The settings in this file configure FreeRTOS correctly for the
 * given hardware and compiler.
 *
 * These settings should not be altered.
 *-----------------------------------------------------------
 */

/* Type definitions. */
#define portCHAR        char
#define portFLOAT       float
#define portDOUBLE      double
#define portLONG        long
#define portSHORT       short
#define portSTACK_TYPE  uint8_t
#define portBASE_TYPE   char

typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;


#if( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
    typedef uint16_t TickType_t;
    #define portMAX_DELAY ( TickType_t ) 0xffff
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
    typedef uint32_t TickType_t;
    #define portMAX_DELAY ( TickType_t )    ( 0xFFFFFFFF )
#else
    #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
#endif
/*-----------------------------------------------------------*/

/* Hardware specifics. */
#define portBYTE_ALIGNMENT          1
#define portSTACK_GROWTH            ( -1 )
#define portTICK_PERIOD_MS          ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portYIELD()                 __asm( "swi" );
/*-----------------------------------------------------------*/

/* Critical section handling. */
#define portENABLE_INTERRUPTS()             __asm( "cli" )
#define portDISABLE_INTERRUPTS()            __asm( "sei" )

/*
 * Disable interrupts before incrementing the count of critical section nesting.
 * The nesting count is maintained so we know when interrupts should be
 * re-enabled.  Once interrupts are disabled the nesting count can be accessed
 * directly.  Each task maintains its own nesting count.
 */
#define portENTER_CRITICAL()                                    \
{                                                               \
    extern volatile UBaseType_t uxCriticalNesting;  \
                                                                \
    portDISABLE_INTERRUPTS();                                   \
    uxCriticalNesting++;                                        \
}

/*
 * Interrupts are disabled so we can access the nesting count directly.  If the
 * nesting is found to be 0 (no nesting) then we are leaving the critical
 * section and interrupts can be re-enabled.
 */
#define  portEXIT_CRITICAL()                                    \
{                                                               \
    extern volatile UBaseType_t uxCriticalNesting;  \
                                                                \
    uxCriticalNesting--;                                        \
    if( uxCriticalNesting == 0 )                                \
    {                                                           \
        portENABLE_INTERRUPTS();                                \
    }                                                           \
}
/*-----------------------------------------------------------*/

/* Task utilities. */

/*
 * These macros are very simple as the processor automatically saves and
 * restores its registers as interrupts are entered and exited.  In
 * addition to the (automatically stacked) registers we also stack the
 * critical nesting count.  Each task maintains its own critical nesting
 * count as it is legitimate for a task to yield from within a critical
 * section.  If the banked memory model is being used then the PPAGE
 * register is also stored as part of the tasks context.
 */

#ifdef BANKED_MODEL
    /*
     * Load the stack pointer for the task, then pull the critical nesting
     * count and PPAGE register from the stack.  The remains of the
     * context are restored by the RTI instruction.
     */
    #define portRESTORE_CONTEXT()                           \
    {                                       \
        __asm( "                                \n\
        .globl pxCurrentTCB         ; void *            \n\
        .globl uxCriticalNesting        ; char              \n\
                                            \n\
        ldx  pxCurrentTCB                           \n\
        lds  0,x                ; Stack             \n\
                                            \n\
        movb 1,sp+,uxCriticalNesting                        \n\
        movb 1,sp+,0x30             ; PPAGE             \n\
        " );                                    \
    }

    /*
     * By the time this macro is called the processor has already stacked the
     * registers.  Simply stack the nesting count and PPAGE value, then save
     * the task stack pointer.
     */
    #define portSAVE_CONTEXT()                          \
    {                                       \
        __asm( "                                \n\
        .globl pxCurrentTCB         ; void *            \n\
        .globl uxCriticalNesting        ; char              \n\
                                            \n\
        movb 0x30, 1,-sp            ; PPAGE             \n\
        movb uxCriticalNesting, 1,-sp                       \n\
                                            \n\
        ldx  pxCurrentTCB                           \n\
        sts  0,x                ; Stack             \n\
        " );                                    \
    }
#else

    /*
     * These macros are as per the BANKED versions above, but without saving
     * and restoring the PPAGE register.
     */

    #define portRESTORE_CONTEXT()                           \
    {                                       \
        __asm( "                                \n\
        .globl pxCurrentTCB         ; void *            \n\
        .globl uxCriticalNesting        ; char              \n\
                                            \n\
        ldx  pxCurrentTCB                           \n\
        lds  0,x                ; Stack             \n\
                                            \n\
        movb 1,sp+,uxCriticalNesting                        \n\
        " );                                    \
    }

    #define portSAVE_CONTEXT()                          \
    {                                       \
        __asm( "                                \n\
        .globl pxCurrentTCB         ; void *            \n\
        .globl uxCriticalNesting        ; char              \n\
                                            \n\
        movb uxCriticalNesting, 1,-sp                       \n\
                                            \n\
        ldx  pxCurrentTCB                           \n\
        sts  0,x                ; Stack             \n\
        " );                                    \
    }
#endif

/*
 * Utility macros to save/restore correct software registers for GCC. This is
 * useful when GCC does not generate appropriate ISR head/tail code.
 */
#define portISR_HEAD()                                  \
{                                           \
        __asm("                                 \n\
        movw _.frame, 2,-sp                         \n\
        movw _.tmp, 2,-sp                           \n\
        movw _.z, 2,-sp                             \n\
        movw _.xy, 2,-sp                            \n\
        ;movw _.d2, 2,-sp                           \n\
        ;movw _.d1, 2,-sp                           \n\
        ");                                 \
}

#define portISR_TAIL()                                  \
{                                           \
        __asm("                                 \n\
        movw 2,sp+, _.xy                            \n\
        movw 2,sp+, _.z                             \n\
        movw 2,sp+, _.tmp                           \n\
        movw 2,sp+, _.frame                         \n\
        ;movw 2,sp+, _.d1                           \n\
        ;movw 2,sp+, _.d2                           \n\
        rti                                 \n\
        ");                                 \
}

/*
 * Utility macro to call macros above in correct order in order to perform a
 * task switch from within a standard ISR.  This macro can only be used if
 * the ISR does not use any local (stack) variables.  If the ISR uses stack
 * variables portYIELD() should be used in it's place.
 */

#define portTASK_SWITCH_FROM_ISR()                              \
    portSAVE_CONTEXT();                                         \
    vTaskSwitchContext();                                       \
    portRESTORE_CONTEXT();


/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )

/* *INDENT-OFF* */
#ifdef __cplusplus
    }
#endif
/* *INDENT-ON* */

#endif /* PORTMACRO_H */