/*
 * FreeRTOS Kernel V10.0.0
 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software. If you wish to use our Amazon
 * FreeRTOS name, please do so in a fair use way that does not cause confusion.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */


#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

#ifdef __cplusplus
extern "C" {
#endif

/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
 *
 * See http://www.freertos.org/a00110.html.
 *----------------------------------------------------------*/


/* Set configCREATE_LOW_POWER_DEMO to one to run the simple blinky demo low power
example, or 1 to run the more comprehensive test and demo application.  See
the comments at the top of main.c for more information. */
#define configCREATE_LOW_POWER_DEMO		0

/* Some configuration is dependent on the demo being built. */
#if( configCREATE_LOW_POWER_DEMO == 1 )

	/* The low power demo uses a slow low power clock, so the SysTick clock,
	which is used by default by Cortex-M ports, is not used to generate the
	tick interrupt. */
	#define configOVERRIDE_DEFAULT_TICK_CONFIGURATION	1

	/* The slow clock used to generate the tick interrupt in the low power demo
	runs at 32768Hz.  Ensure the clock is a multiple of the tick rate. */
	#define configTICK_RATE_HZ	( 128 )

	/* The low power demo uses the tickless idle feature. */
	#define configUSE_TICKLESS_IDLE		1

#else

	/* Some of the standard demo test tasks assume a tick rate of 1KHz, even
	though that is faster than would normally be warranted by a real
	application. */
	#define configTICK_RATE_HZ			( 1000 )

	/* The full demo always has tasks to run so the tick will never be turned
	off.  The blinky demo will use the default tickless idle implementation to
	turn the tick off. */
	#define configUSE_TICKLESS_IDLE		0

#endif

#define configUSE_PREEMPTION					1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION	0
#define configUSE_QUEUE_SETS					1
#define configUSE_IDLE_HOOK						0
#define configUSE_TICK_HOOK						1
#define configCPU_CLOCK_HZ						48000000
#define configMAX_PRIORITIES					( 5 )
#define configMINIMAL_STACK_SIZE				( ( unsigned short ) 190 )
#define configTOTAL_HEAP_SIZE					( ( size_t ) ( 25 * 1024 ) )
#define configMAX_TASK_NAME_LEN					( 10 )
#define configUSE_TRACE_FACILITY				0
#define configUSE_16_BIT_TICKS					0
#define configIDLE_SHOULD_YIELD					1
#define configUSE_MUTEXES						1
#define configQUEUE_REGISTRY_SIZE				0
#define configCHECK_FOR_STACK_OVERFLOW			2
#define configUSE_RECURSIVE_MUTEXES				1
#define configUSE_MALLOC_FAILED_HOOK			1
#define configUSE_APPLICATION_TASK_TAG			0
#define configUSE_COUNTING_SEMAPHORES			1
#define configSUPPORT_STATIC_ALLOCATION			1

/* Run time stats gathering definitions. */
#define configGENERATE_RUN_TIME_STATS	0
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS()
#define portGET_RUN_TIME_COUNTER_VALUE()

/* This demo makes use of one or more example stats formatting functions.  These
format the raw data provided by the uxTaskGetSystemState() function in to human
readable ASCII form.  See the notes in the implementation of vTaskList() within
FreeRTOS/Source/tasks.c for limitations. */
#define configUSE_STATS_FORMATTING_FUNCTIONS	0

/* Co-routine definitions. */
#define configUSE_CO_ROUTINES			 0
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )

/* Software timer definitions. */
#define configUSE_TIMERS				1
#define configTIMER_TASK_PRIORITY		( configMAX_PRIORITIES - 1 )
#define configTIMER_QUEUE_LENGTH		5
#define configTIMER_TASK_STACK_DEPTH	( configMINIMAL_STACK_SIZE )

/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */
#define INCLUDE_vTaskPrioritySet		1
#define INCLUDE_uxTaskPriorityGet		1
#define INCLUDE_vTaskDelete				1
#define INCLUDE_vTaskCleanUpResources	1
#define INCLUDE_vTaskSuspend			1
#define INCLUDE_vTaskDelayUntil			1
#define INCLUDE_vTaskDelay				1
#define INCLUDE_eTaskGetState			1
#define INCLUDE_xTimerPendFunctionCall	1

/* Cortex-M specific definitions. */
#ifdef __NVIC_PRIO_BITS
	/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
	#define configPRIO_BITS		       __NVIC_PRIO_BITS
#else
	#define configPRIO_BITS		       3	/* 7 priority levels */
#endif

/* The lowest interrupt priority that can be used in a call to a "set priority"
function. */
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			0x7

/* The highest interrupt priority that can be used by any interrupt service
routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
PRIORITY THAN THIS! (higher priorities are lower numeric values. */
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	5

/* Interrupt priorities used by the kernel port layer itself.  These are generic
to all Cortex-M ports, and do not rely on any particular library functions. */
#define configKERNEL_INTERRUPT_PRIORITY		 ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
#define configMAX_SYSCALL_INTERRUPT_PRIORITY	 ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )


/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
standard names. */
#define xPortPendSVHandler PendSV_Handler
#define vPortSVCHandler SVC_Handler
#define xPortSysTickHandler SysTick_Handler

/* Cannot bracket x when using MikroC. */
#define configASSERT( x ) if( x == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }

/* Adjustments required to build the FreeRTOS source code when using the MikroC
compiler follow --------------------------------------------------------------*/

/* NOTE! Must purge invalid paths if the MikroC project is moved. */
/* MikroC won't build the FreeRTOS code when const is used, so remove it. */
#define const

/* The compiler needs to be told functions that are only referenced by
pointer are to be included in the build.  NOTE:  Omitting these lines will
result in a run-time crash, not a linker error! */
#pragma funcall main_full prvCheckTask prvRegTestTaskEntry1 prvRegTestTaskEntry2
#pragma funcall vStartDynamicPriorityTasks xSuspendedTestQueue vContinuousIncrementTask vLimitedIncrementTask vCounterControlTask vQueueSendWhenSuspendedTask vQueueReceiveWhenSuspendedTask
#pragma funcall vStartBlockingQueueTasks vBlockingQueueConsumer vBlockingQueueProducer vBlockingQueueConsumer vBlockingQueueProducer vBlockingQueueProducer vBlockingQueueConsumer
#pragma funcall vStartMathTasks vCompetingMathTask1 vCompetingMathTask2 vCompetingMathTask3 vCompetingMathTask4
#pragma funcall vStartEventGroupTasks prvTestSlaveTask prvTestMasterTask prvSyncTask xSyncTask2
#pragma funcall vStartTaskNotifyTask prvNotifiedTask
#pragma funcall vCreateBlockTimeTasks vPrimaryBlockTimeTestTask vSecondaryBlockTimeTestTask
#pragma funcall vStartDynamicPriorityTasks vContinuousIncrementTask vLimitedIncrementTask vCounterControlTask vQueueSendWhenSuspendedTask vQueueReceiveWhenSuspendedTask
#pragma funcall vStartGenericQueueTasks prvSendFrontAndBackTest prvLowPriorityMutexTask prvMediumPriorityMutexTask prvHighPriorityMutexTask
#pragma funcall vStartTimerDemoTask prvTimerTestTask
#pragma funcall prvTimerTestTask prvOneShotTimerCallback
#pragma funcall prvTest1_CreateTimersWithoutSchedulerRunning prvAutoReloadTimerCallback prvISRAutoReloadTimerCallback prvISROneShotTimerCallback
#pragma funcall vStartInterruptQueueTasks prvHigherPriorityNormallyEmptyTask prvHigherPriorityNormallyEmptyTask prvLowerPriorityNormallyEmptyTask prv1stHigherPriorityNormallyFullTask prv2ndHigherPriorityNormallyFullTask prvLowerPriorityNormallyFullTask
#pragma funcall vStartBlockingQueueTasks vBlockingQueueConsumer vBlockingQueueProducer vBlockingQueueConsumer vBlockingQueueProducer vBlockingQueueProducer vBlockingQueueConsumer
#pragma funcall vStartCountingSemaphoreTasks prvCountingSemaphoreTask
#pragma funcall vStartRecursiveMutexTasks prvRecursiveMutexControllingTask prvRecursiveMutexBlockingTask prvRecursiveMutexPollingTask
#pragma funcall vStartSemaphoreTasks prvSemaphoreTest
#pragma funcall vCreateSuicidalTasks vCreateTasks
#pragma funcall vCreateTasks vSuicidalTask vSuicidalTask

#define configTOGGLE_LED() do{ ulLED++; GPIO_OUTPUT_PIN_154_bit = ( ulLED & 0x01UL ); } while( 0 )


#ifdef __cplusplus
}
#endif
#endif /* FREERTOS_CONFIG_H */