/*
    FreeRTOS V8.1.0 - Copyright (C) 2014 Real Time Engineers Ltd. 
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that has become a de facto standard.             *
     *                                                                       *
     *    Help yourself get started quickly and support the FreeRTOS         *
     *    project by purchasing a FreeRTOS tutorial book, reference          *
     *    manual, or both from: http://www.FreeRTOS.org/Documentation        *
     *                                                                       *
     *    Thank you!                                                         *
     *                                                                       *
    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available from the following
    link: http://www.freertos.org/a00114.html

    1 tab == 4 spaces!

    ***************************************************************************
     *                                                                       *
     *    Having a problem?  Start by reading the FAQ "My application does   *
     *    not run, what could be wrong?"                                     *
     *                                                                       *
     *    http://www.FreeRTOS.org/FAQHelp.html                               *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
    license and Real Time Engineers Ltd. contact details.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
    Integrity Systems to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/

/* Hardware specific includes. */
#include <tc1782.h>
#include <machine/intrinsics.h>
#include <machine/cint.h>
#include <machine/wdtcon.h>

/* Scheduler Includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"

/* Demo Includes. */
#include "serial.h"

/*****************************************************************************
 * Please note!
 *
 * This file is here to provide a means of generating interrupts to test the
 * FreeRTOS tricore port.  First - it configures the UART into loopback mode,
 * and has only been used in loopback mode.  Therefore, the baud rate
 * calculation used has never been verified for correctness.  Second -
 * characters are passed into and out of the interrupt service routines using
 * character queues.  This provides a good test of the interrupt interaction,
 * context switching mechanism, and kernel loading, it is however highly
 * inefficient if the UART is being used to handle even moderate amounts of
 * data throughput.
 */


/*---------------------------------------------------------------------------*/

/*
 * See if the Serial Transmit Interrupt is currently activated, meaning that
 * the interrupt is working through the back log of bytes that it needs to
 * send. If the ISR is not enabled, then it will be triggered to send the first
 * byte, and it will be automatically re-triggered when that byte has been
 * sent. When the queue is exhausted, the ISR disables itself.
 */
static void prvCheckTransmit( void );

/*
 * The transmit and receive interrupt handlers.
 */
static void prvTxBufferInterruptHandler( int iArg ) __attribute__( ( longcall ) );
static void prvRxInterruptHandler( int iArg )__attribute__( ( longcall ) );

/*-----------------------------------------------------------*/

/* Queues used to pass bytes into and out of the interrupt handlers.
NOTE:  This is not intended to be an example of an efficient interrupt handler,
but instead to load the kernel and interrupt mechanisms in order to test the
FreeRTOS port.  Using a FIFO, DMA, circular buffer, etc. architecture will
to improve efficiency. */
static QueueHandle_t xSerialTransmitQueue = NULL;
static QueueHandle_t xSerialReceiveQueue = NULL;
static volatile portBASE_TYPE xTransmitStatus = 0UL;

/*-----------------------------------------------------------*/

xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
{
unsigned long ulReloadValue = 0UL;

	ulReloadValue = ( configPERIPHERAL_CLOCK_HZ / ( 48UL * ulWantedBaud ) ) - 1UL;

	if( NULL == xSerialTransmitQueue )
	{
		xSerialTransmitQueue = xQueueCreate( uxQueueLength, sizeof( char ) );
		xSerialReceiveQueue = xQueueCreate( uxQueueLength, sizeof( char ) );
	}

	/* Enable ASC0 Module. */
	unlock_wdtcon();
	{
		while ( 0 != ( WDT_CON0.reg & 0x1UL ) );
		ASC0_CLC.reg = 0x0200UL;
	}
	lock_wdtcon();

	/* Disable the Operation. */
	ASC0_CON.reg &= 0xFFFF7FFF;

	/* Set-up the GPIO Ports. */
	P3_IOCR0.reg = 0x00009000;	/* 3.0 ASC In, 3.1 Alt ASC Out */

	/* Write the baud rate. */
	ASC0_BG.reg = ulReloadValue;

	/* Reconfigure and re-initialise the Operation. */
	ASC0_PISEL.reg = 0UL;
	ASC0_CON.reg = 0UL;
	ASC0_CON.bits.M = 0x01; /* 8bit async. */
	ASC0_CON.bits.REN = 0x01; /* Receiver enabled. */
	ASC0_CON.bits.FDE = 0x01; /* Fractional divider enabled. */
	ASC0_CON.bits.BRS = 0x01; /* Divide by three. */
	ASC0_CON.bits.LB = 0x01; /* Loopback enabled. */
	ASC0_CON.bits.R = 0x01; /* Enable the baud rate generator. */

	/* Install the Tx interrupt. */
	if( 0 != _install_int_handler( configINTERRUPT_PRIORITY_TX, prvTxBufferInterruptHandler, 0 ) )
	{
		ASC0_TBSRC.reg = configINTERRUPT_PRIORITY_TX | 0x5000UL;
		xTransmitStatus = 0UL;
	}

	/* Install the Rx interrupt. */
	if( 0 != _install_int_handler( configINTERRUPT_PRIORITY_RX, prvRxInterruptHandler, 0 ) )
	{
		ASC0_RSRC.reg = configINTERRUPT_PRIORITY_RX | 0x5000UL;
	}

	/* COM Handle is never used by demo code. */
	return (xComPortHandle) pdPASS;
}
/*---------------------------------------------------------------------------*/

void vSerialPutString( xComPortHandle pxPort, const signed char * const pcString, unsigned short usStringLength )
{
unsigned short usChar;

	for( usChar = 0; usChar < usStringLength; usChar++ )
	{
		xSerialPutChar( pxPort, pcString[ usChar ], portMAX_DELAY );
	}
}
/*---------------------------------------------------------------------------*/

signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, TickType_t xBlockTime )
{
	/* Just to remove compiler warnings about unused parameters. */
	( void )pxPort;

	return xQueueReceive( xSerialReceiveQueue, pcRxedChar, xBlockTime );
}
/*---------------------------------------------------------------------------*/

signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, TickType_t xBlockTime )
{
portBASE_TYPE xReturn = pdPASS;

	/* Just to remove compiler warnings about unused parameters. */
	( void )pxPort;

	/* Send the character to the interrupt handler. */
	xReturn = xQueueSend( xSerialTransmitQueue, &cOutChar, xBlockTime );

	/* Start the transmission of bytes if necessary. */
	prvCheckTransmit();

	return xReturn;
}
/*---------------------------------------------------------------------------*/

static void prvTxBufferInterruptHandler( int iArg )
{
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
unsigned char ucTx;

	/* Just to remove compiler warnings about unused parameters. */
	( void ) iArg;

	/* ACK. */
	ASC0_TBSRC.reg |= 0x4000UL;
	xTransmitStatus = 1UL;

	/* TBUF Can be refilled. */
	if( pdPASS == xQueueReceiveFromISR( xSerialTransmitQueue, &ucTx, &xHigherPriorityTaskWoken ) )
	{
		ASC0_TBUF.reg = ucTx;
	}
	else
	{
		/* Failed to get a character out of the Queue. No longer busy. */
		xTransmitStatus = 0UL;
	}

	/* Finally end ISR and switch Task if necessary. */
	portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
}
/*---------------------------------------------------------------------------*/

static void prvRxInterruptHandler( int iArg )
{
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
unsigned char ucRx;

	/* Just to remove compiler warnings about unused parameters. */
	( void ) iArg;

	/* Grab the character as early as possible. */
	ucRx = ( unsigned char ) ASC0_RBUF.reg;

	/* ACK. */
	ASC0_RSRC.reg |= 0x4000UL;

	/* Frame available in RBUF. */
	if( pdPASS != xQueueSendFromISR( xSerialReceiveQueue, &ucRx, &xHigherPriorityTaskWoken ) )
	{
		/* Error handling code can go here. */
	}

	/* Finally end ISR and switch Task if necessary. */
	portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
}
/*---------------------------------------------------------------------------*/

void prvCheckTransmit( void )
{
	/* Check to see if the interrupt handler is working its way through the
	buffer. */
	if( 0 == xTransmitStatus )
	{
		/* Not currently operational so kick off the first byte. */
		ASC0_TBSRC.reg |= 0x8000UL;
	}
}
/*---------------------------------------------------------------------------*/